view tests/test-run-tests.t @ 26750:9f9ec4abe700

cmdutil: make in-memory changes visible to external editor (issue4378)

Before this patch, external editor process for the commit log can't
view some in-memory changes (especially, of dirstate), because they
aren't written out until the end of transaction (or wlock).

This causes unexpected output of Mercurial commands spawned from that
editor process.

To make in-memory changes visible to external editor process, this
patch does:

  - write (or schedule to write) in-memory dirstate changes, and
  - set HG_PENDING environment variable, if:
    - a transaction is running, and
    - there are in-memory changes to be visible

"hg diff" spawned from external editor process for "hg qrefresh"
shows:

  - "changes newly imported into the topmost" before 49148d7868df(*)
  - "all changes recorded in the topmost by refreshing" after this patch

(*) 49148d7868df changed steps invoking editor process

Even though backward compatibility may be broken, the latter behavior
looks reasonable, because "hg diff" spawned from the editor process
consistently shows "what changes new revision records" regardless of
invocation context.

In fact, issue4378 itself should be resolved by 800e090e9c64, which
made 'repo.transaction()' write in-memory dirstate changes out
explicitly before starting transaction. It also made "hg qrefresh"
imply 'dirstate.write()' before external editor invocation in call
chain below.

  - mq.queue.refresh
    - strip.strip
      - repair.strip
        - localrepository.transaction
          - dirstate.write
    - localrepository.commit
      - invoke external editor

Though, this patch has '(issue4378)' in own summary line to indicate
that issues like issue4378 should be fixed by this.

BTW, this patch adds '-m' option to a 'hg ci --amend' execution in
'test-commit-amend.t', to avoid invoking external editor process.

In this case, "unsure" states may be changed to "clean" according to
timestamp or so on. These changes should be written into pending file,
if external editor invocation is required,

Then, writing dirstate changes out breaks stability of test, because
it shows "transaction abort!/rollback completed" occasionally.

Aborting after editor process invocation while commands below may
cause similar instability of tests, too (AFAIK, there is no more such
one, at this revision)

  - commit --amend
    - without --message/--logfile

  - import
    - without --message/--logfile,
    - without --no-commit,
    - without --bypass,
    - one of below, and
      - patch has no description text, or
      - with --edit
    - aborting at the 1st patch, which adds or removes file(s)
      - if it only changes existing files, status is checked only for
        changed files by 'scmutil.matchfiles()', and transition from
        "unsure" to "normal" in dirstate doesn't occur (= dirstate
        isn't changed, and written out)
      - aborting at the 2nd or later patch implies other pending
        changes (e.g. changelog), and always causes showing
        "transaction abort!/rollback completed"

This file tests the behavior of run-tests.py itself.

Avoid interference from actual test env:

  $ unset HGTEST_JOBS
  $ unset HGTEST_TIMEOUT
  $ unset HGTEST_PORT
  $ unset HGTEST_SHELL

Smoke test
============

  $ run-tests.py $HGTEST_RUN_TESTS_PURE
  
  # Ran 0 tests, 0 skipped, 0 warned, 0 failed.

a succesful test
=======================

  $ cat > test-success.t << EOF
  >   $ echo babar
  >   babar
  >   $ echo xyzzy
  >   never happens (?)
  >   xyzzy
  >   nor this (?)
  > EOF

  $ run-tests.py --with-hg=`which hg`
  .
  # Ran 1 tests, 0 skipped, 0 warned, 0 failed.

failing test
==================

  $ cat > test-failure.t << EOF
  >   $ echo babar
  >   rataxes
  > This is a noop statement so that
  > this test is still more bytes than success.
  > EOF

  >>> fh = open('test-failure-unicode.t', 'wb')
  >>> fh.write(u'  $ echo babar\u03b1\n'.encode('utf-8')) and None
  >>> fh.write(u'  l\u03b5\u03b5t\n'.encode('utf-8')) and None

  $ run-tests.py --with-hg=`which hg`
  
  --- $TESTTMP/test-failure.t
  +++ $TESTTMP/test-failure.t.err
  @@ -1,4 +1,4 @@
     $ echo babar
  -  rataxes
  +  babar
   This is a noop statement so that
   this test is still more bytes than success.
  
  ERROR: test-failure.t output changed
  !.
  --- $TESTTMP/test-failure-unicode.t
  +++ $TESTTMP/test-failure-unicode.t.err
  @@ -1,2 +1,2 @@
     $ echo babar\xce\xb1 (esc)
  -  l\xce\xb5\xce\xb5t (esc)
  +  babar\xce\xb1 (esc)
  
  ERROR: test-failure-unicode.t output changed
  !
  Failed test-failure.t: output changed
  Failed test-failure-unicode.t: output changed
  # Ran 3 tests, 0 skipped, 0 warned, 2 failed.
  python hash seed: * (glob)
  [1]

test --xunit support
  $ run-tests.py --with-hg=`which hg` --xunit=xunit.xml
  
  --- $TESTTMP/test-failure.t
  +++ $TESTTMP/test-failure.t.err
  @@ -1,4 +1,4 @@
     $ echo babar
  -  rataxes
  +  babar
   This is a noop statement so that
   this test is still more bytes than success.
  
  ERROR: test-failure.t output changed
  !.
  --- $TESTTMP/test-failure-unicode.t
  +++ $TESTTMP/test-failure-unicode.t.err
  @@ -1,2 +1,2 @@
     $ echo babar\xce\xb1 (esc)
  -  l\xce\xb5\xce\xb5t (esc)
  +  babar\xce\xb1 (esc)
  
  ERROR: test-failure-unicode.t output changed
  !
  Failed test-failure.t: output changed
  Failed test-failure-unicode.t: output changed
  # Ran 3 tests, 0 skipped, 0 warned, 2 failed.
  python hash seed: * (glob)
  [1]
  $ cat xunit.xml
  <?xml version="1.0" encoding="utf-8"?>
  <testsuite errors="0" failures="2" name="run-tests" skipped="0" tests="3">
    <testcase name="test-success.t" time="*"/> (glob)
    <testcase name="test-failure-unicode.t" time="*"> (glob)
  <![CDATA[--- $TESTTMP/test-failure-unicode.t
  +++ $TESTTMP/test-failure-unicode.t.err
  @@ -1,2 +1,2 @@
     $ echo babar\xce\xb1 (esc)
  -  l\xce\xb5\xce\xb5t (esc)
  +  babar\xce\xb1 (esc)
  ]]>  </testcase>
    <testcase name="test-failure.t" time="*"> (glob)
  <![CDATA[--- $TESTTMP/test-failure.t
  +++ $TESTTMP/test-failure.t.err
  @@ -1,4 +1,4 @@
     $ echo babar
  -  rataxes
  +  babar
   This is a noop statement so that
   this test is still more bytes than success.
  ]]>  </testcase>
  </testsuite>

  $ rm test-failure-unicode.t

test for --retest
====================

  $ run-tests.py --with-hg=`which hg` --retest
  
  --- $TESTTMP/test-failure.t
  +++ $TESTTMP/test-failure.t.err
  @@ -1,4 +1,4 @@
     $ echo babar
  -  rataxes
  +  babar
   This is a noop statement so that
   this test is still more bytes than success.
  
  ERROR: test-failure.t output changed
  !
  Failed test-failure.t: output changed
  # Ran 2 tests, 1 skipped, 0 warned, 1 failed.
  python hash seed: * (glob)
  [1]

Selecting Tests To Run
======================

successful

  $ run-tests.py --with-hg=`which hg` test-success.t
  .
  # Ran 1 tests, 0 skipped, 0 warned, 0 failed.

success w/ keyword
  $ run-tests.py --with-hg=`which hg` -k xyzzy
  .
  # Ran 2 tests, 1 skipped, 0 warned, 0 failed.

failed

  $ run-tests.py --with-hg=`which hg` test-failure.t
  
  --- $TESTTMP/test-failure.t
  +++ $TESTTMP/test-failure.t.err
  @@ -1,4 +1,4 @@
     $ echo babar
  -  rataxes
  +  babar
   This is a noop statement so that
   this test is still more bytes than success.
  
  ERROR: test-failure.t output changed
  !
  Failed test-failure.t: output changed
  # Ran 1 tests, 0 skipped, 0 warned, 1 failed.
  python hash seed: * (glob)
  [1]

failure w/ keyword
  $ run-tests.py --with-hg=`which hg` -k rataxes
  
  --- $TESTTMP/test-failure.t
  +++ $TESTTMP/test-failure.t.err
  @@ -1,4 +1,4 @@
     $ echo babar
  -  rataxes
  +  babar
   This is a noop statement so that
   this test is still more bytes than success.
  
  ERROR: test-failure.t output changed
  !
  Failed test-failure.t: output changed
  # Ran 2 tests, 1 skipped, 0 warned, 1 failed.
  python hash seed: * (glob)
  [1]

Verify that when a process fails to start we show a useful message
==================================================================
NOTE: there is currently a bug where this shows "2 failed" even though
it's actually the same test being reported for failure twice.

  $ cat > test-serve-fail.t <<EOF
  >   $ echo 'abort: child process failed to start blah'
  > EOF
  $ run-tests.py --with-hg=`which hg` test-serve-fail.t
  
  ERROR: test-serve-fail.t output changed
  !
  ERROR: test-serve-fail.t output changed
  !
  Failed test-serve-fail.t: server failed to start (HGPORT=*) (glob)
  Failed test-serve-fail.t: output changed
  # Ran 1 tests, 0 skipped, 0 warned, 2 failed.
  python hash seed: * (glob)
  [1]
  $ rm test-serve-fail.t

Running In Debug Mode
======================

  $ run-tests.py --with-hg=`which hg` --debug 2>&1 | grep -v pwd
  + echo *SALT* 0 0 (glob)
  *SALT* 0 0 (glob)
  + echo babar
  babar
  + echo *SALT* 4 0 (glob)
  *SALT* 4 0 (glob)
  .+ echo *SALT* 0 0 (glob)
  *SALT* 0 0 (glob)
  + echo babar
  babar
  + echo *SALT* 2 0 (glob)
  *SALT* 2 0 (glob)
  + echo xyzzy
  xyzzy
  + echo *SALT* 6 0 (glob)
  *SALT* 6 0 (glob)
  .
  # Ran 2 tests, 0 skipped, 0 warned, 0 failed.

Parallel runs
==============

(duplicate the failing test to get predictable output)
  $ cp test-failure.t test-failure-copy.t

  $ run-tests.py --with-hg=`which hg` --jobs 2 test-failure*.t -n
  !!
  Failed test-failure*.t: output changed (glob)
  Failed test-failure*.t: output changed (glob)
  # Ran 2 tests, 0 skipped, 0 warned, 2 failed.
  python hash seed: * (glob)
  [1]

failures in parallel with --first should only print one failure
  >>> f = open('test-nothing.t', 'w')
  >>> f.write('foo\n' * 1024) and None
  >>> f.write('  $ sleep 1') and None
  $ run-tests.py --with-hg=`which hg` --jobs 2 --first
  
  --- $TESTTMP/test-failure*.t (glob)
  +++ $TESTTMP/test-failure*.t.err (glob)
  @@ -1,4 +1,4 @@
     $ echo babar
  -  rataxes
  +  babar
   This is a noop statement so that
   this test is still more bytes than success.
  
  Failed test-failure*.t: output changed (glob)
  Failed test-nothing.t: output changed
  # Ran 2 tests, 0 skipped, 0 warned, 2 failed.
  python hash seed: * (glob)
  [1]


(delete the duplicated test file)
  $ rm test-failure-copy.t test-nothing.t


Interactive run
===============

(backup the failing test)
  $ cp test-failure.t backup

Refuse the fix

  $ echo 'n' | run-tests.py --with-hg=`which hg` -i
  
  --- $TESTTMP/test-failure.t
  +++ $TESTTMP/test-failure.t.err
  @@ -1,4 +1,4 @@
     $ echo babar
  -  rataxes
  +  babar
   This is a noop statement so that
   this test is still more bytes than success.
  Accept this change? [n] 
  ERROR: test-failure.t output changed
  !.
  Failed test-failure.t: output changed
  # Ran 2 tests, 0 skipped, 0 warned, 1 failed.
  python hash seed: * (glob)
  [1]

  $ cat test-failure.t
    $ echo babar
    rataxes
  This is a noop statement so that
  this test is still more bytes than success.

Interactive with custom view

  $ echo 'n' | run-tests.py --with-hg=`which hg` -i --view echo
  $TESTTMP/test-failure.t $TESTTMP/test-failure.t.err (glob)
  Accept this change? [n]* (glob)
  ERROR: test-failure.t output changed
  !.
  Failed test-failure.t: output changed
  # Ran 2 tests, 0 skipped, 0 warned, 1 failed.
  python hash seed: * (glob)
  [1]

View the fix

  $ echo 'y' | run-tests.py --with-hg=`which hg` --view echo
  $TESTTMP/test-failure.t $TESTTMP/test-failure.t.err (glob)
  
  ERROR: test-failure.t output changed
  !.
  Failed test-failure.t: output changed
  # Ran 2 tests, 0 skipped, 0 warned, 1 failed.
  python hash seed: * (glob)
  [1]

Accept the fix

  $ echo "  $ echo 'saved backup bundle to \$TESTTMP/foo.hg'" >> test-failure.t
  $ echo "  saved backup bundle to \$TESTTMP/foo.hg" >> test-failure.t
  $ echo "  $ echo 'saved backup bundle to \$TESTTMP/foo.hg'" >> test-failure.t
  $ echo "  saved backup bundle to \$TESTTMP/foo.hg (glob)" >> test-failure.t
  $ echo "  $ echo 'saved backup bundle to \$TESTTMP/foo.hg'" >> test-failure.t
  $ echo "  saved backup bundle to \$TESTTMP/*.hg (glob)" >> test-failure.t
  $ echo 'y' | run-tests.py --with-hg=`which hg` -i 2>&1 | \
  >   sed -e 's,(glob)$,&<,g'
  
  --- $TESTTMP/test-failure.t
  +++ $TESTTMP/test-failure.t.err
  @@ -1,9 +1,9 @@
     $ echo babar
  -  rataxes
  +  babar
   This is a noop statement so that
   this test is still more bytes than success.
     $ echo 'saved backup bundle to $TESTTMP/foo.hg'
  -  saved backup bundle to $TESTTMP/foo.hg
  +  saved backup bundle to $TESTTMP/foo.hg (glob)<
     $ echo 'saved backup bundle to $TESTTMP/foo.hg'
     saved backup bundle to $TESTTMP/foo.hg (glob)<
     $ echo 'saved backup bundle to $TESTTMP/foo.hg'
  Accept this change? [n] ..
  # Ran 2 tests, 0 skipped, 0 warned, 0 failed.

  $ sed -e 's,(glob)$,&<,g' test-failure.t
    $ echo babar
    babar
  This is a noop statement so that
  this test is still more bytes than success.
    $ echo 'saved backup bundle to $TESTTMP/foo.hg'
    saved backup bundle to $TESTTMP/foo.hg (glob)<
    $ echo 'saved backup bundle to $TESTTMP/foo.hg'
    saved backup bundle to $TESTTMP/foo.hg (glob)<
    $ echo 'saved backup bundle to $TESTTMP/foo.hg'
    saved backup bundle to $TESTTMP/*.hg (glob)<

(reinstall)
  $ mv backup test-failure.t

No Diff
===============

  $ run-tests.py --with-hg=`which hg` --nodiff
  !.
  Failed test-failure.t: output changed
  # Ran 2 tests, 0 skipped, 0 warned, 1 failed.
  python hash seed: * (glob)
  [1]

test --tmpdir support
  $ run-tests.py --with-hg=`which hg` --tmpdir=$TESTTMP/keep test-success.t
  
  Keeping testtmp dir: $TESTTMP/keep/child1/test-success.t (glob)
  Keeping threadtmp dir: $TESTTMP/keep/child1  (glob)
  .
  # Ran 1 tests, 0 skipped, 0 warned, 0 failed.

test for --time
==================

  $ run-tests.py --with-hg=`which hg` test-success.t --time
  .
  # Ran 1 tests, 0 skipped, 0 warned, 0 failed.
  # Producing time report
  start   end     cuser   csys    real      Test
  \s*[\d\.]{5}   \s*[\d\.]{5}   \s*[\d\.]{5}   \s*[\d\.]{5}   \s*[\d\.]{5}   test-success.t (re)

test for --time with --job enabled
====================================

  $ run-tests.py --with-hg=`which hg` test-success.t --time --jobs 2
  .
  # Ran 1 tests, 0 skipped, 0 warned, 0 failed.
  # Producing time report
  start   end     cuser   csys    real      Test
  \s*[\d\.]{5}   \s*[\d\.]{5}   \s*[\d\.]{5}   \s*[\d\.]{5}   \s*[\d\.]{5}   test-success.t (re)

Skips
================
  $ cat > test-skip.t <<EOF
  >   $ echo xyzzy
  > #require false
  > EOF
  $ run-tests.py --with-hg=`which hg` --nodiff
  !.s
  Skipped test-skip.t: skipped
  Failed test-failure.t: output changed
  # Ran 2 tests, 1 skipped, 0 warned, 1 failed.
  python hash seed: * (glob)
  [1]

  $ run-tests.py --with-hg=`which hg` --keyword xyzzy
  .s
  Skipped test-skip.t: skipped
  # Ran 2 tests, 2 skipped, 0 warned, 0 failed.

Skips with xml
  $ run-tests.py --with-hg=`which hg` --keyword xyzzy \
  >  --xunit=xunit.xml
  .s
  Skipped test-skip.t: skipped
  # Ran 2 tests, 2 skipped, 0 warned, 0 failed.
  $ cat xunit.xml
  <?xml version="1.0" encoding="utf-8"?>
  <testsuite errors="0" failures="0" name="run-tests" skipped="2" tests="2">
    <testcase name="test-success.t" time="*"/> (glob)
  </testsuite>

Missing skips or blacklisted skips don't count as executed:
  $ echo test-failure.t > blacklist
  $ run-tests.py --with-hg=`which hg` --blacklist=blacklist \
  >   test-failure.t test-bogus.t
  ss
  Skipped test-bogus.t: Doesn't exist
  Skipped test-failure.t: blacklisted
  # Ran 0 tests, 2 skipped, 0 warned, 0 failed.

#if json

test for --json
==================

  $ run-tests.py --with-hg=`which hg` --json
  
  --- $TESTTMP/test-failure.t
  +++ $TESTTMP/test-failure.t.err
  @@ -1,4 +1,4 @@
     $ echo babar
  -  rataxes
  +  babar
   This is a noop statement so that
   this test is still more bytes than success.
  
  ERROR: test-failure.t output changed
  !.s
  Skipped test-skip.t: skipped
  Failed test-failure.t: output changed
  # Ran 2 tests, 1 skipped, 0 warned, 1 failed.
  python hash seed: * (glob)
  [1]

  $ cat report.json
  testreport ={
      "test-failure.t": [\{] (re)
          "csys": "\s*[\d\.]{4,5}", ? (re)
          "cuser": "\s*[\d\.]{4,5}", ? (re)
          "end": "\s*[\d\.]{4,5}", ? (re)
          "result": "failure", ? (re)
          "start": "\s*[\d\.]{4,5}", ? (re)
          "time": "\s*[\d\.]{4,5}" (re)
      }, ? (re)
      "test-skip.t": {
          "csys": "\s*[\d\.]{4,5}", ? (re)
          "cuser": "\s*[\d\.]{4,5}", ? (re)
          "end": "\s*[\d\.]{4,5}", ? (re)
          "result": "skip", ? (re)
          "start": "\s*[\d\.]{4,5}", ? (re)
          "time": "\s*[\d\.]{4,5}" (re)
      }, ? (re)
      "test-success.t": [\{] (re)
          "csys": "\s*[\d\.]{4,5}", ? (re)
          "cuser": "\s*[\d\.]{4,5}", ? (re)
          "end": "\s*[\d\.]{4,5}", ? (re)
          "result": "success", ? (re)
          "start": "\s*[\d\.]{4,5}", ? (re)
          "time": "\s*[\d\.]{4,5}" (re)
      }
  } (no-eol)

Test that failed test accepted through interactive are properly reported:

  $ cp test-failure.t backup
  $ echo y | run-tests.py --with-hg=`which hg` --json -i
  
  --- $TESTTMP/test-failure.t
  +++ $TESTTMP/test-failure.t.err
  @@ -1,4 +1,4 @@
     $ echo babar
  -  rataxes
  +  babar
   This is a noop statement so that
   this test is still more bytes than success.
  Accept this change? [n] ..s
  Skipped test-skip.t: skipped
  # Ran 2 tests, 1 skipped, 0 warned, 0 failed.

  $ cat report.json
  testreport ={
      "test-failure.t": [\{] (re)
          "csys": "\s*[\d\.]{4,5}", ? (re)
          "cuser": "\s*[\d\.]{4,5}", ? (re)
          "end": "\s*[\d\.]{4,5}", ? (re)
          "result": "success", ? (re)
          "start": "\s*[\d\.]{4,5}", ? (re)
          "time": "\s*[\d\.]{4,5}" (re)
      }, ? (re)
      "test-skip.t": {
          "csys": "\s*[\d\.]{4,5}", ? (re)
          "cuser": "\s*[\d\.]{4,5}", ? (re)
          "end": "\s*[\d\.]{4,5}", ? (re)
          "result": "skip", ? (re)
          "start": "\s*[\d\.]{4,5}", ? (re)
          "time": "\s*[\d\.]{4,5}" (re)
      }, ? (re)
      "test-success.t": [\{] (re)
          "csys": "\s*[\d\.]{4,5}", ? (re)
          "cuser": "\s*[\d\.]{4,5}", ? (re)
          "end": "\s*[\d\.]{4,5}", ? (re)
          "result": "success", ? (re)
          "start": "\s*[\d\.]{4,5}", ? (re)
          "time": "\s*[\d\.]{4,5}" (re)
      }
  } (no-eol)
  $ mv backup test-failure.t

#endif

backslash on end of line with glob matching is handled properly

  $ cat > test-glob-backslash.t << EOF
  >   $ echo 'foo bar \\'
  >   foo * \ (glob)
  > EOF

  $ run-tests.py --with-hg=`which hg` test-glob-backslash.t
  .
  # Ran 1 tests, 0 skipped, 0 warned, 0 failed.

  $ rm -f test-glob-backslash.t

Test reusability for third party tools
======================================

  $ mkdir "$TESTTMP"/anothertests
  $ cd "$TESTTMP"/anothertests

test that `run-tests.py` can execute hghave, even if it runs not in
Mercurial source tree.

  $ cat > test-hghave.t <<EOF
  > #require true
  >   $ echo foo
  >   foo
  > EOF
  $ run-tests.py $HGTEST_RUN_TESTS_PURE test-hghave.t
  .
  # Ran 1 tests, 0 skipped, 0 warned, 0 failed.

test that RUNTESTDIR refers the directory, in which `run-tests.py` now
running is placed.

  $ cat > test-runtestdir.t <<EOF
  > - $TESTDIR, in which test-run-tests.t is placed
  > - \$TESTDIR, in which test-runtestdir.t is placed (expanded at runtime)
  > - \$RUNTESTDIR, in which run-tests.py is placed (expanded at runtime)
  > 
  >   $ test "\$TESTDIR" = "$TESTTMP"/anothertests
  >   $ test "\$RUNTESTDIR" = "$TESTDIR"
  >   $ head -n 3 "\$RUNTESTDIR"/../contrib/check-code.py
  >   #!/usr/bin/env python
  >   #
  >   # check-code - a style and portability checker for Mercurial
  > EOF
  $ run-tests.py $HGTEST_RUN_TESTS_PURE test-runtestdir.t
  .
  # Ran 1 tests, 0 skipped, 0 warned, 0 failed.

#if execbit

test that TESTDIR is referred in PATH

  $ cat > custom-command.sh <<EOF
  > #!/bin/sh
  > echo "hello world"
  > EOF
  $ chmod +x custom-command.sh
  $ cat > test-testdir-path.t <<EOF
  >   $ custom-command.sh
  >   hello world
  > EOF
  $ run-tests.py $HGTEST_RUN_TESTS_PURE test-testdir-path.t
  .
  # Ran 1 tests, 0 skipped, 0 warned, 0 failed.

#endif

test support for --allow-slow-tests
  $ cat > test-very-slow-test.t <<EOF
  > #require slow
  >   $ echo pass
  >   pass
  > EOF
  $ run-tests.py $HGTEST_RUN_TESTS_PURE test-very-slow-test.t
  s
  Skipped test-very-slow-test.t: skipped
  # Ran 0 tests, 1 skipped, 0 warned, 0 failed.
  $ run-tests.py $HGTEST_RUN_TESTS_PURE --allow-slow-tests test-very-slow-test.t
  .
  # Ran 1 tests, 0 skipped, 0 warned, 0 failed.