view tests/test-ssh.t @ 26750:9f9ec4abe700

cmdutil: make in-memory changes visible to external editor (issue4378)

Before this patch, external editor process for the commit log can't
view some in-memory changes (especially, of dirstate), because they
aren't written out until the end of transaction (or wlock).

This causes unexpected output of Mercurial commands spawned from that
editor process.

To make in-memory changes visible to external editor process, this
patch does:

  - write (or schedule to write) in-memory dirstate changes, and
  - set HG_PENDING environment variable, if:
    - a transaction is running, and
    - there are in-memory changes to be visible

"hg diff" spawned from external editor process for "hg qrefresh"
shows:

  - "changes newly imported into the topmost" before 49148d7868df(*)
  - "all changes recorded in the topmost by refreshing" after this patch

(*) 49148d7868df changed steps invoking editor process

Even though backward compatibility may be broken, the latter behavior
looks reasonable, because "hg diff" spawned from the editor process
consistently shows "what changes new revision records" regardless of
invocation context.

In fact, issue4378 itself should be resolved by 800e090e9c64, which
made 'repo.transaction()' write in-memory dirstate changes out
explicitly before starting transaction. It also made "hg qrefresh"
imply 'dirstate.write()' before external editor invocation in call
chain below.

  - mq.queue.refresh
    - strip.strip
      - repair.strip
        - localrepository.transaction
          - dirstate.write
    - localrepository.commit
      - invoke external editor

Though, this patch has '(issue4378)' in own summary line to indicate
that issues like issue4378 should be fixed by this.

BTW, this patch adds '-m' option to a 'hg ci --amend' execution in
'test-commit-amend.t', to avoid invoking external editor process.

In this case, "unsure" states may be changed to "clean" according to
timestamp or so on. These changes should be written into pending file,
if external editor invocation is required,

Then, writing dirstate changes out breaks stability of test, because
it shows "transaction abort!/rollback completed" occasionally.

Aborting after editor process invocation while commands below may
cause similar instability of tests, too (AFAIK, there is no more such
one, at this revision)

  - commit --amend
    - without --message/--logfile

  - import
    - without --message/--logfile,
    - without --no-commit,
    - without --bypass,
    - one of below, and
      - patch has no description text, or
      - with --edit
    - aborting at the 1st patch, which adds or removes file(s)
      - if it only changes existing files, status is checked only for
        changed files by 'scmutil.matchfiles()', and transition from
        "unsure" to "normal" in dirstate doesn't occur (= dirstate
        isn't changed, and written out)
      - aborting at the 2nd or later patch implies other pending
        changes (e.g. changelog), and always causes showing
        "transaction abort!/rollback completed"

This test tries to exercise the ssh functionality with a dummy script

creating 'remote' repo

  $ hg init remote
  $ cd remote
  $ echo this > foo
  $ echo this > fooO
  $ hg ci -A -m "init" foo fooO

insert a closed branch (issue4428)

  $ hg up null
  0 files updated, 0 files merged, 2 files removed, 0 files unresolved
  $ hg branch closed
  marked working directory as branch closed
  (branches are permanent and global, did you want a bookmark?)
  $ hg ci -mc0
  $ hg ci --close-branch -mc1
  $ hg up -q default

configure for serving

  $ cat <<EOF > .hg/hgrc
  > [server]
  > uncompressed = True
  > 
  > [hooks]
  > changegroup = printenv.py changegroup-in-remote 0 ../dummylog
  > EOF
  $ cd ..

repo not found error

  $ hg clone -e "python \"$TESTDIR/dummyssh\"" ssh://user@dummy/nonexistent local
  remote: abort: repository nonexistent not found!
  abort: no suitable response from remote hg!
  [255]

non-existent absolute path

  $ hg clone -e "python \"$TESTDIR/dummyssh\"" ssh://user@dummy/`pwd`/nonexistent local
  remote: abort: repository $TESTTMP/nonexistent not found!
  abort: no suitable response from remote hg!
  [255]

clone remote via stream

  $ hg clone -e "python \"$TESTDIR/dummyssh\"" --uncompressed ssh://user@dummy/remote local-stream
  streaming all changes
  4 files to transfer, 615 bytes of data
  transferred 615 bytes in * seconds (*) (glob)
  searching for changes
  no changes found
  updating to branch default
  2 files updated, 0 files merged, 0 files removed, 0 files unresolved
  $ cd local-stream
  $ hg verify
  checking changesets
  checking manifests
  crosschecking files in changesets and manifests
  checking files
  2 files, 3 changesets, 2 total revisions
  $ hg branches
  default                        0:1160648e36ce
  $ cd ..

clone bookmarks via stream

  $ hg -R local-stream book mybook
  $ hg clone -e "python \"$TESTDIR/dummyssh\"" --uncompressed ssh://user@dummy/local-stream stream2
  streaming all changes
  4 files to transfer, 615 bytes of data
  transferred 615 bytes in * seconds (*) (glob)
  searching for changes
  no changes found
  updating to branch default
  2 files updated, 0 files merged, 0 files removed, 0 files unresolved
  $ cd stream2
  $ hg book
     mybook                    0:1160648e36ce
  $ cd ..
  $ rm -rf local-stream stream2

clone remote via pull

  $ hg clone -e "python \"$TESTDIR/dummyssh\"" ssh://user@dummy/remote local
  requesting all changes
  adding changesets
  adding manifests
  adding file changes
  added 3 changesets with 2 changes to 2 files
  updating to branch default
  2 files updated, 0 files merged, 0 files removed, 0 files unresolved

verify

  $ cd local
  $ hg verify
  checking changesets
  checking manifests
  crosschecking files in changesets and manifests
  checking files
  2 files, 3 changesets, 2 total revisions
  $ echo '[hooks]' >> .hg/hgrc
  $ echo "changegroup = printenv.py changegroup-in-local 0 ../dummylog" >> .hg/hgrc

empty default pull

  $ hg paths
  default = ssh://user@dummy/remote
  $ hg pull -e "python \"$TESTDIR/dummyssh\""
  pulling from ssh://user@dummy/remote
  searching for changes
  no changes found

pull from wrong ssh URL

  $ hg pull -e "python \"$TESTDIR/dummyssh\"" ssh://user@dummy/doesnotexist
  pulling from ssh://user@dummy/doesnotexist
  remote: abort: repository doesnotexist not found!
  abort: no suitable response from remote hg!
  [255]

local change

  $ echo bleah > foo
  $ hg ci -m "add"

updating rc

  $ echo "default-push = ssh://user@dummy/remote" >> .hg/hgrc
  $ echo "[ui]" >> .hg/hgrc
  $ echo "ssh = python \"$TESTDIR/dummyssh\"" >> .hg/hgrc

find outgoing

  $ hg out ssh://user@dummy/remote
  comparing with ssh://user@dummy/remote
  searching for changes
  changeset:   3:a28a9d1a809c
  tag:         tip
  parent:      0:1160648e36ce
  user:        test
  date:        Thu Jan 01 00:00:00 1970 +0000
  summary:     add
  

find incoming on the remote side

  $ hg incoming -R ../remote -e "python \"$TESTDIR/dummyssh\"" ssh://user@dummy/local
  comparing with ssh://user@dummy/local
  searching for changes
  changeset:   3:a28a9d1a809c
  tag:         tip
  parent:      0:1160648e36ce
  user:        test
  date:        Thu Jan 01 00:00:00 1970 +0000
  summary:     add
  

find incoming on the remote side (using absolute path)

  $ hg incoming -R ../remote -e "python \"$TESTDIR/dummyssh\"" "ssh://user@dummy/`pwd`"
  comparing with ssh://user@dummy/$TESTTMP/local
  searching for changes
  changeset:   3:a28a9d1a809c
  tag:         tip
  parent:      0:1160648e36ce
  user:        test
  date:        Thu Jan 01 00:00:00 1970 +0000
  summary:     add
  

push

  $ hg push
  pushing to ssh://user@dummy/remote
  searching for changes
  remote: adding changesets
  remote: adding manifests
  remote: adding file changes
  remote: added 1 changesets with 1 changes to 1 files
  $ cd ../remote

check remote tip

  $ hg tip
  changeset:   3:a28a9d1a809c
  tag:         tip
  parent:      0:1160648e36ce
  user:        test
  date:        Thu Jan 01 00:00:00 1970 +0000
  summary:     add
  
  $ hg verify
  checking changesets
  checking manifests
  crosschecking files in changesets and manifests
  checking files
  2 files, 4 changesets, 3 total revisions
  $ hg cat -r tip foo
  bleah
  $ echo z > z
  $ hg ci -A -m z z
  created new head

test pushkeys and bookmarks

  $ cd ../local
  $ hg debugpushkey --config ui.ssh="python \"$TESTDIR/dummyssh\"" ssh://user@dummy/remote namespaces
  bookmarks	
  namespaces	
  phases	
  $ hg book foo -r 0
  $ hg out -B
  comparing with ssh://user@dummy/remote
  searching for changed bookmarks
     foo                       1160648e36ce
  $ hg push -B foo
  pushing to ssh://user@dummy/remote
  searching for changes
  no changes found
  exporting bookmark foo
  [1]
  $ hg debugpushkey --config ui.ssh="python \"$TESTDIR/dummyssh\"" ssh://user@dummy/remote bookmarks
  foo	1160648e36cec0054048a7edc4110c6f84fde594
  $ hg book -f foo
  $ hg push --traceback
  pushing to ssh://user@dummy/remote
  searching for changes
  no changes found
  updating bookmark foo
  [1]
  $ hg book -d foo
  $ hg in -B
  comparing with ssh://user@dummy/remote
  searching for changed bookmarks
     foo                       a28a9d1a809c
  $ hg book -f -r 0 foo
  $ hg pull -B foo
  pulling from ssh://user@dummy/remote
  no changes found
  updating bookmark foo
  $ hg book -d foo
  $ hg push -B foo
  pushing to ssh://user@dummy/remote
  searching for changes
  no changes found
  deleting remote bookmark foo
  [1]

a bad, evil hook that prints to stdout

  $ cat <<EOF > $TESTTMP/badhook
  > import sys
  > sys.stdout.write("KABOOM\n")
  > EOF

  $ echo '[hooks]' >> ../remote/.hg/hgrc
  $ echo "changegroup.stdout = python $TESTTMP/badhook" >> ../remote/.hg/hgrc
  $ echo r > r
  $ hg ci -A -m z r

push should succeed even though it has an unexpected response

  $ hg push
  pushing to ssh://user@dummy/remote
  searching for changes
  remote has heads on branch 'default' that are not known locally: 6c0482d977a3
  remote: adding changesets
  remote: adding manifests
  remote: adding file changes
  remote: added 1 changesets with 1 changes to 1 files
  remote: KABOOM
  $ hg -R ../remote heads
  changeset:   5:1383141674ec
  tag:         tip
  parent:      3:a28a9d1a809c
  user:        test
  date:        Thu Jan 01 00:00:00 1970 +0000
  summary:     z
  
  changeset:   4:6c0482d977a3
  parent:      0:1160648e36ce
  user:        test
  date:        Thu Jan 01 00:00:00 1970 +0000
  summary:     z
  

clone bookmarks

  $ hg -R ../remote bookmark test
  $ hg -R ../remote bookmarks
   * test                      4:6c0482d977a3
  $ hg clone -e "python \"$TESTDIR/dummyssh\"" ssh://user@dummy/remote local-bookmarks
  requesting all changes
  adding changesets
  adding manifests
  adding file changes
  added 6 changesets with 5 changes to 4 files (+1 heads)
  updating to branch default
  3 files updated, 0 files merged, 0 files removed, 0 files unresolved
  $ hg -R local-bookmarks bookmarks
     test                      4:6c0482d977a3

passwords in ssh urls are not supported
(we use a glob here because different Python versions give different
results here)

  $ hg push ssh://user:erroneouspwd@dummy/remote
  pushing to ssh://user:*@dummy/remote (glob)
  abort: password in URL not supported!
  [255]

  $ cd ..

hide outer repo
  $ hg init

Test remote paths with spaces (issue2983):

  $ hg init --ssh "python \"$TESTDIR/dummyssh\"" "ssh://user@dummy/a repo"
  $ touch "$TESTTMP/a repo/test"
  $ hg -R 'a repo' commit -A -m "test"
  adding test
  $ hg -R 'a repo' tag tag
  $ hg id --ssh "python \"$TESTDIR/dummyssh\"" "ssh://user@dummy/a repo"
  73649e48688a

  $ hg id --ssh "python \"$TESTDIR/dummyssh\"" "ssh://user@dummy/a repo#noNoNO"
  abort: unknown revision 'noNoNO'!
  [255]

Test (non-)escaping of remote paths with spaces when cloning (issue3145):

  $ hg clone --ssh "python \"$TESTDIR/dummyssh\"" "ssh://user@dummy/a repo"
  destination directory: a repo
  abort: destination 'a repo' is not empty
  [255]

Test hg-ssh using a helper script that will restore PYTHONPATH (which might
have been cleared by a hg.exe wrapper) and invoke hg-ssh with the right
parameters:

  $ cat > ssh.sh << EOF
  > userhost="\$1"
  > SSH_ORIGINAL_COMMAND="\$2"
  > export SSH_ORIGINAL_COMMAND
  > PYTHONPATH="$PYTHONPATH"
  > export PYTHONPATH
  > python "$TESTDIR/../contrib/hg-ssh" "$TESTTMP/a repo"
  > EOF

  $ hg id --ssh "sh ssh.sh" "ssh://user@dummy/a repo"
  73649e48688a

  $ hg id --ssh "sh ssh.sh" "ssh://user@dummy/a'repo"
  remote: Illegal repository "$TESTTMP/a'repo" (glob)
  abort: no suitable response from remote hg!
  [255]

  $ hg id --ssh "sh ssh.sh" --remotecmd hacking "ssh://user@dummy/a'repo"
  remote: Illegal command "hacking -R 'a'\''repo' serve --stdio"
  abort: no suitable response from remote hg!
  [255]

  $ SSH_ORIGINAL_COMMAND="'hg' -R 'a'repo' serve --stdio" python "$TESTDIR/../contrib/hg-ssh"
  Illegal command "'hg' -R 'a'repo' serve --stdio": No closing quotation
  [255]

Test hg-ssh in read-only mode:

  $ cat > ssh.sh << EOF
  > userhost="\$1"
  > SSH_ORIGINAL_COMMAND="\$2"
  > export SSH_ORIGINAL_COMMAND
  > PYTHONPATH="$PYTHONPATH"
  > export PYTHONPATH
  > python "$TESTDIR/../contrib/hg-ssh" --read-only "$TESTTMP/remote"
  > EOF

  $ hg clone --ssh "sh ssh.sh" "ssh://user@dummy/$TESTTMP/remote" read-only-local
  requesting all changes
  adding changesets
  adding manifests
  adding file changes
  added 6 changesets with 5 changes to 4 files (+1 heads)
  updating to branch default
  3 files updated, 0 files merged, 0 files removed, 0 files unresolved

  $ cd read-only-local
  $ echo "baz" > bar
  $ hg ci -A -m "unpushable commit" bar
  $ hg push --ssh "sh ../ssh.sh"
  pushing to ssh://user@dummy/*/remote (glob)
  searching for changes
  remote: Permission denied
  abort: pretxnopen.hg-ssh hook failed
  [255]

  $ cd ..

stderr from remote commands should be printed before stdout from local code (issue4336)

  $ hg clone remote stderr-ordering
  updating to branch default
  3 files updated, 0 files merged, 0 files removed, 0 files unresolved
  $ cd stderr-ordering
  $ cat >> localwrite.py << EOF
  > from mercurial import exchange, extensions
  > 
  > def wrappedpush(orig, repo, *args, **kwargs):
  >     res = orig(repo, *args, **kwargs)
  >     repo.ui.write('local stdout\n')
  >     return res
  > 
  > def extsetup(ui):
  >     extensions.wrapfunction(exchange, 'push', wrappedpush)
  > EOF

  $ cat >> .hg/hgrc << EOF
  > [paths]
  > default-push = ssh://user@dummy/remote
  > [ui]
  > ssh = python "$TESTDIR/dummyssh"
  > [extensions]
  > localwrite = localwrite.py
  > EOF

  $ echo localwrite > foo
  $ hg commit -m 'testing localwrite'
  $ hg push
  pushing to ssh://user@dummy/remote
  searching for changes
  remote: adding changesets
  remote: adding manifests
  remote: adding file changes
  remote: added 1 changesets with 1 changes to 1 files
  remote: KABOOM
  local stdout

debug output

  $ hg pull --debug ssh://user@dummy/remote
  pulling from ssh://user@dummy/remote
  running python ".*/dummyssh" user@dummy ('|")hg -R remote serve --stdio('|") (re)
  sending hello command
  sending between command
  remote: 345
  remote: capabilities: lookup changegroupsubset branchmap pushkey known getbundle unbundlehash batch stream bundle2=HG20%0Achangegroup%3D01%2C02%0Adigests%3Dmd5%2Csha1%2Csha512%0Aerror%3Dabort%2Cunsupportedcontent%2Cpushraced%2Cpushkey%0Ahgtagsfnodes%0Alistkeys%0Apushkey%0Aremote-changegroup%3Dhttp%2Chttps unbundle=HG10GZ,HG10BZ,HG10UN httpheader=1024
  remote: 1
  query 1; heads
  sending batch command
  searching for changes
  all remote heads known locally
  no changes found
  sending getbundle command
  bundle2-input-bundle: with-transaction
  bundle2-input-part: "listkeys" (params: 1 mandatory) supported
  bundle2-input-part: "listkeys" (params: 1 mandatory) supported
  bundle2-input-part: total payload size 45
  bundle2-input-bundle: 1 parts total
  checking for updated bookmarks
  preparing listkeys for "phases"
  sending listkeys command
  received listkey for "phases": 15 bytes

  $ cd ..

  $ cat dummylog
  Got arguments 1:user@dummy 2:hg -R nonexistent serve --stdio
  Got arguments 1:user@dummy 2:hg -R $TESTTMP/nonexistent serve --stdio
  Got arguments 1:user@dummy 2:hg -R remote serve --stdio
  Got arguments 1:user@dummy 2:hg -R local-stream serve --stdio
  Got arguments 1:user@dummy 2:hg -R remote serve --stdio
  Got arguments 1:user@dummy 2:hg -R remote serve --stdio
  Got arguments 1:user@dummy 2:hg -R doesnotexist serve --stdio
  Got arguments 1:user@dummy 2:hg -R remote serve --stdio
  Got arguments 1:user@dummy 2:hg -R local serve --stdio
  Got arguments 1:user@dummy 2:hg -R $TESTTMP/local serve --stdio
  Got arguments 1:user@dummy 2:hg -R remote serve --stdio
  changegroup-in-remote hook: HG_BUNDLE2=1 HG_NODE=a28a9d1a809cab7d4e2fde4bee738a9ede948b60 HG_SOURCE=serve HG_TXNID=TXN:* HG_URL=remote:ssh:127.0.0.1 (glob)
  Got arguments 1:user@dummy 2:hg -R remote serve --stdio
  Got arguments 1:user@dummy 2:hg -R remote serve --stdio
  Got arguments 1:user@dummy 2:hg -R remote serve --stdio
  Got arguments 1:user@dummy 2:hg -R remote serve --stdio
  Got arguments 1:user@dummy 2:hg -R remote serve --stdio
  Got arguments 1:user@dummy 2:hg -R remote serve --stdio
  Got arguments 1:user@dummy 2:hg -R remote serve --stdio
  Got arguments 1:user@dummy 2:hg -R remote serve --stdio
  Got arguments 1:user@dummy 2:hg -R remote serve --stdio
  changegroup-in-remote hook: HG_BUNDLE2=1 HG_NODE=1383141674ec756a6056f6a9097618482fe0f4a6 HG_SOURCE=serve HG_TXNID=TXN:* HG_URL=remote:ssh:127.0.0.1 (glob)
  Got arguments 1:user@dummy 2:hg -R remote serve --stdio
  Got arguments 1:user@dummy 2:hg init 'a repo'
  Got arguments 1:user@dummy 2:hg -R 'a repo' serve --stdio
  Got arguments 1:user@dummy 2:hg -R 'a repo' serve --stdio
  Got arguments 1:user@dummy 2:hg -R 'a repo' serve --stdio
  Got arguments 1:user@dummy 2:hg -R 'a repo' serve --stdio
  Got arguments 1:user@dummy 2:hg -R remote serve --stdio
  changegroup-in-remote hook: HG_BUNDLE2=1 HG_NODE=65c38f4125f9602c8db4af56530cc221d93b8ef8 HG_SOURCE=serve HG_TXNID=TXN:* HG_URL=remote:ssh:127.0.0.1 (glob)
  Got arguments 1:user@dummy 2:hg -R remote serve --stdio