view hgext/split.py @ 52081:a021da4ec509

merge: add a config to allow conflict-free merge of changes on adjacent lines

This change adds a config to make it no longer a conflict to merge changes
made on adjacent lines.

The reason these changes are considered a conflict is that there's no
region of text at the relevant position (sync region) that's kept unchanged
by both sides of the merge.

The problem can be solved by making the sync regions being a bit more
powerful: we can keep a 0-length sync region if we find that
a block unchanged by one side is ajacent to a block unchanged by the
other side.

Since these 0-length sync regions are emitted using the ~same algorithm
as the normal non-empty sync regions, this change involves no arbitrary
decisions and I expect it to work pretty well.

0-length sync regions do create an ambiguity in a special case where two
pairs of adjacent regions "meet" at the same point. This corresponds to
an insertion made at the same place by the two sides of the merge, and
this still results in a conflict.

# split.py - split a changeset into smaller ones
#
# Copyright 2015 Laurent Charignon <[e-mail]>
# Copyright 2017 Facebook, Inc.
#
# This software may be used and distributed according to the terms of the
# GNU General Public License version 2 or any later version.
"""command to split a changeset into smaller ones (EXPERIMENTAL)"""

from __future__ import annotations

from mercurial.i18n import _

from mercurial.node import (
    nullrev,
    short,
)

from mercurial import (
    bookmarks,
    cmdutil,
    commands,
    error,
    hg,
    logcmdutil,
    registrar,
    revsetlang,
    rewriteutil,
    scmutil,
    util,
)

# allow people to use split without explicitly enabling rebase extension
from . import rebase

cmdtable = {}
command = registrar.command(cmdtable)

# Note for extension authors: ONLY specify testedwith = 'ships-with-hg-core' for
# extensions which SHIP WITH MERCURIAL. Non-mainline extensions should
# be specifying the version(s) of Mercurial they are tested with, or
# leave the attribute unspecified.
testedwith = b'ships-with-hg-core'


@command(
    b'split',
    [
        (b'r', b'rev', b'', _(b"revision to split"), _(b'REV')),
        (b'', b'rebase', True, _(b'rebase descendants after split')),
    ]
    + cmdutil.commitopts2,
    _(b'hg split [--no-rebase] [[-r] REV]'),
    helpcategory=command.CATEGORY_CHANGE_MANAGEMENT,
    helpbasic=True,
)
def split(ui, repo, *revs, **opts):
    """split a changeset into smaller ones

    Repeatedly prompt changes and commit message for new changesets until there
    is nothing left in the original changeset.

    If --rev was not given, split the working directory parent.

    By default, rebase connected non-obsoleted descendants onto the new
    changeset. Use --no-rebase to avoid the rebase.
    """
    revlist = []
    if opts.get('rev'):
        revlist.append(opts.get('rev'))
    revlist.extend(revs)
    with repo.wlock(), repo.lock():
        tr = repo.transaction(b'split')
        # If the rebase somehow runs into conflicts, make sure
        # we close the transaction so the user can continue it.
        with util.acceptintervention(tr):
            revs = logcmdutil.revrange(repo, revlist or [b'.'])
            if len(revs) > 1:
                raise error.InputError(_(b'cannot split multiple revisions'))

            rev = revs.first()
            # Handle nullrev specially here (instead of leaving for precheck()
            # below) so we get a nicer message and error code.
            if rev is None or rev == nullrev:
                ui.status(_(b'nothing to split\n'))
                return 1
            ctx = repo[rev]
            if ctx.node() is None:
                raise error.InputError(_(b'cannot split working directory'))

            if opts.get('rebase'):
                # Skip obsoleted descendants and their descendants so the rebase
                # won't cause conflicts for sure.
                descendants = list(repo.revs(b'(%d::) - (%d)', rev, rev))
                torebase = list(
                    repo.revs(
                        b'%ld - (%ld & obsolete())::', descendants, descendants
                    )
                )
            else:
                torebase = []
            rewriteutil.precheck(repo, [rev] + torebase, b'split')

            if len(ctx.parents()) > 1:
                raise error.InputError(_(b'cannot split a merge changeset'))

            cmdutil.bailifchanged(repo)

            # Deactivate bookmark temporarily so it won't get moved
            # unintentionally
            bname = repo._activebookmark
            if bname and repo._bookmarks[bname] != ctx.node():
                bookmarks.deactivate(repo)

            wnode = repo[b'.'].node()
            top = None
            try:
                top = dosplit(ui, repo, tr, ctx, **opts)
            finally:
                # top is None: split failed, need update --clean recovery.
                # wnode == ctx.node(): wnode split, no need to update.
                if top is None or wnode != ctx.node():
                    hg.clean(repo, wnode, show_stats=False)
                if bname:
                    bookmarks.activate(repo, bname)
            if torebase and top:
                dorebase(ui, repo, torebase, top)


def dosplit(ui, repo, tr, ctx, **opts):
    committed = []  # [ctx]

    # Set working parent to ctx.p1(), and keep working copy as ctx's content
    if ctx.node() != repo.dirstate.p1():
        hg.clean(repo, ctx.node(), show_stats=False)
    with repo.dirstate.changing_parents(repo):
        scmutil.movedirstate(repo, ctx.p1())

    # Any modified, added, removed, deleted result means split is incomplete
    def incomplete(repo):
        st = repo.status()
        return any((st.modified, st.added, st.removed, st.deleted))

    # Main split loop
    while incomplete(repo):
        if committed:
            header = _(
                b'HG: Splitting %s. So far it has been split into:\n'
            ) % short(ctx.node())
            # We don't want color codes in the commit message template, so
            # disable the label() template function while we render it.
            with ui.configoverride(
                {(b'templatealias', b'label(l,x)'): b"x"}, b'split'
            ):
                for c in committed:
                    summary = cmdutil.format_changeset_summary(ui, c, b'split')
                    header += _(b'HG: - %s\n') % summary
            header += _(
                b'HG: Write commit message for the next split changeset.\n'
            )
        else:
            header = _(
                b'HG: Splitting %s. Write commit message for the '
                b'first split changeset.\n'
            ) % short(ctx.node())
        opts.update(
            {
                'edit': True,
                'interactive': True,
                'message': header + ctx.description(),
            }
        )
        origctx = repo[b'.']
        commands.commit(ui, repo, **opts)
        newctx = repo[b'.']
        # Ensure user didn't do a "no-op" split (such as deselecting
        # everything).
        if origctx.node() != newctx.node():
            committed.append(newctx)

    if not committed:
        raise error.InputError(_(b'cannot split an empty revision'))

    if len(committed) != 1 or committed[0].node() != ctx.node():
        # Ensure we don't strip a node if we produce the same commit as already
        # exists
        scmutil.cleanupnodes(
            repo,
            {ctx.node(): [c.node() for c in committed]},
            operation=b'split',
            fixphase=True,
        )

    return committed[-1]


def dorebase(ui, repo, src, destctx):
    rebase.rebase(
        ui,
        repo,
        rev=[revsetlang.formatspec(b'%ld', src)],
        dest=revsetlang.formatspec(b'%d', destctx.rev()),
    )