view tests/test-commit.t @ 17658:a02c1ffddae9 stable

largefiles: handle commit -A properly, after a --large commit (issue3542) Previous to this, 'commit -A' would add as normal files, files that were already committed as largefiles, resulting in files being listed twice by 'status -A'. It also missed when (only) a largefile was deleted, even though status reported it as '!'. This also has the side effect of properly reporting the state of the affected largefiles in the post commit hook after a remove that also affected a normal file (the largefiles used to be 'R', now are properly absent). Since scmutil.addremove() is called both by the ui command (after some trivial argument validation) and during the commit process when -A is specified, it seems like a more appropriate method to wrap than the addremove command. Currently, a repo is only enabled to use largefiles after an add that explicitly identifies some file as large, and a subsequent commit. Therefore, this patch only changes behavior after such a largefile enabling commit. Note that in the test, if the final commit had a '-v', 'removing large8' would be printed twice. Both of these originate in removelargefiles(). The first print is in verbose mode after traversing remove + forget, the second is because the '_isaddremove' attr is set and 'after' is not.
author Matt Harbison <matt_harbison@yahoo.com>
date Mon, 30 Jul 2012 20:56:41 -0400
parents b87acfda5268
children 94317c2d53b8
line wrap: on
line source

commit date test

  $ hg init test
  $ cd test
  $ echo foo > foo
  $ hg add foo
  $ HGEDITOR=true hg commit -m ""
  abort: empty commit message
  [255]
  $ hg commit -d '0 0' -m commit-1
  $ echo foo >> foo
  $ hg commit -d '1 4444444' -m commit-3
  abort: impossible time zone offset: 4444444
  [255]
  $ hg commit -d '1	15.1' -m commit-4
  abort: invalid date: '1\t15.1'
  [255]
  $ hg commit -d 'foo bar' -m commit-5
  abort: invalid date: 'foo bar'
  [255]
  $ hg commit -d ' 1 4444' -m commit-6
  $ hg commit -d '111111111111 0' -m commit-7
  abort: date exceeds 32 bits: 111111111111
  [255]
  $ hg commit -d '-7654321 3600' -m commit-7
  abort: negative date value: -7654321
  [255]

commit added file that has been deleted

  $ echo bar > bar
  $ hg add bar
  $ rm bar
  $ hg commit -m commit-8
  nothing changed (1 missing files, see 'hg status')
  [1]
  $ hg commit -m commit-8-2 bar
  abort: bar: file not found!
  [255]

  $ hg -q revert -a --no-backup

  $ mkdir dir
  $ echo boo > dir/file
  $ hg add
  adding dir/file (glob)
  $ hg -v commit -m commit-9 dir
  dir/file
  committed changeset 2:d2a76177cb42

  $ echo > dir.file
  $ hg add
  adding dir.file
  $ hg commit -m commit-10 dir dir.file
  abort: dir: no match under directory!
  [255]

  $ echo >> dir/file
  $ mkdir bleh
  $ mkdir dir2
  $ cd bleh
  $ hg commit -m commit-11 .
  abort: bleh: no match under directory!
  [255]
  $ hg commit -m commit-12 ../dir ../dir2
  abort: dir2: no match under directory!
  [255]
  $ hg -v commit -m commit-13 ../dir
  dir/file
  committed changeset 3:1cd62a2d8db5
  $ cd ..

  $ hg commit -m commit-14 does-not-exist
  abort: does-not-exist: * (glob)
  [255]

#if symlink
  $ ln -s foo baz
  $ hg commit -m commit-15 baz
  abort: baz: file not tracked!
  [255]
#endif

  $ touch quux
  $ hg commit -m commit-16 quux
  abort: quux: file not tracked!
  [255]
  $ echo >> dir/file
  $ hg -v commit -m commit-17 dir/file
  dir/file
  committed changeset 4:49176991390e

An empty date was interpreted as epoch origin

  $ echo foo >> foo
  $ hg commit -d '' -m commit-no-date
  $ hg tip --template '{date|isodate}\n' | grep '1970'
  [1]

Make sure we do not obscure unknown requires file entries (issue2649)

  $ echo foo >> foo
  $ echo fake >> .hg/requires
  $ hg commit -m bla
  abort: unknown repository format: requires features 'fake' (upgrade Mercurial)!
  [255]

  $ cd ..


partial subdir commit test

  $ hg init test2
  $ cd test2
  $ mkdir foo
  $ echo foo > foo/foo
  $ mkdir bar
  $ echo bar > bar/bar
  $ hg add
  adding bar/bar (glob)
  adding foo/foo (glob)
  $ hg ci -m commit-subdir-1 foo
  $ hg ci -m commit-subdir-2 bar

subdir log 1

  $ hg log -v foo
  changeset:   0:f97e73a25882
  user:        test
  date:        Thu Jan 01 00:00:00 1970 +0000
  files:       foo/foo
  description:
  commit-subdir-1
  
  

subdir log 2

  $ hg log -v bar
  changeset:   1:aa809156d50d
  tag:         tip
  user:        test
  date:        Thu Jan 01 00:00:00 1970 +0000
  files:       bar/bar
  description:
  commit-subdir-2
  
  

full log

  $ hg log -v
  changeset:   1:aa809156d50d
  tag:         tip
  user:        test
  date:        Thu Jan 01 00:00:00 1970 +0000
  files:       bar/bar
  description:
  commit-subdir-2
  
  
  changeset:   0:f97e73a25882
  user:        test
  date:        Thu Jan 01 00:00:00 1970 +0000
  files:       foo/foo
  description:
  commit-subdir-1
  
  
  $ cd ..


dot and subdir commit test

  $ hg init test3
  $ cd test3
  $ mkdir foo
  $ echo foo content > foo/plain-file
  $ hg add foo/plain-file
  $ hg ci -m commit-foo-subdir foo
  $ echo modified foo content > foo/plain-file
  $ hg ci -m commit-foo-dot .

full log

  $ hg log -v
  changeset:   1:95b38e3a5b2e
  tag:         tip
  user:        test
  date:        Thu Jan 01 00:00:00 1970 +0000
  files:       foo/plain-file
  description:
  commit-foo-dot
  
  
  changeset:   0:65d4e9386227
  user:        test
  date:        Thu Jan 01 00:00:00 1970 +0000
  files:       foo/plain-file
  description:
  commit-foo-subdir
  
  

subdir log

  $ cd foo
  $ hg log .
  changeset:   1:95b38e3a5b2e
  tag:         tip
  user:        test
  date:        Thu Jan 01 00:00:00 1970 +0000
  summary:     commit-foo-dot
  
  changeset:   0:65d4e9386227
  user:        test
  date:        Thu Jan 01 00:00:00 1970 +0000
  summary:     commit-foo-subdir
  
  $ cd ..
  $ cd ..

Issue1049: Hg permits partial commit of merge without warning

  $ hg init issue1049
  $ cd issue1049
  $ echo a > a
  $ hg ci -Ama
  adding a
  $ echo a >> a
  $ hg ci -mb
  $ hg up 0
  1 files updated, 0 files merged, 0 files removed, 0 files unresolved
  $ echo b >> a
  $ hg ci -mc
  created new head
  $ HGMERGE=true hg merge
  merging a
  0 files updated, 1 files merged, 0 files removed, 0 files unresolved
  (branch merge, don't forget to commit)

should fail because we are specifying a file name

  $ hg ci -mmerge a
  abort: cannot partially commit a merge (do not specify files or patterns)
  [255]

should fail because we are specifying a pattern

  $ hg ci -mmerge -I a
  abort: cannot partially commit a merge (do not specify files or patterns)
  [255]

should succeed

  $ hg ci -mmerge
  $ cd ..


test commit message content

  $ hg init commitmsg
  $ cd commitmsg
  $ echo changed > changed
  $ echo removed > removed
  $ hg ci -qAm init

  $ hg rm removed
  $ echo changed >> changed
  $ echo added > added
  $ hg add added
  $ HGEDITOR=cat hg ci -A
  
  
  HG: Enter commit message.  Lines beginning with 'HG:' are removed.
  HG: Leave message empty to abort commit.
  HG: --
  HG: user: test
  HG: branch 'default'
  HG: added added
  HG: changed changed
  HG: removed removed
  abort: empty commit message
  [255]
  $ cd ..


commit copy

  $ hg init dir2
  $ cd dir2
  $ echo bleh > bar
  $ hg add bar
  $ hg ci -m 'add bar'

  $ hg cp bar foo
  $ echo >> bar
  $ hg ci -m 'cp bar foo; change bar'

  $ hg debugrename foo
  foo renamed from bar:26d3ca0dfd18e44d796b564e38dd173c9668d3a9
  $ hg debugindex bar
     rev    offset  length  ..... linkrev nodeid       p1           p2 (re)
       0         0       6  .....       0 26d3ca0dfd18 000000000000 000000000000 (re)
       1         6       7  .....       1 d267bddd54f7 26d3ca0dfd18 000000000000 (re)

  $ cd ..