view tests/test-convert-svn-sink.t @ 17658:a02c1ffddae9 stable

largefiles: handle commit -A properly, after a --large commit (issue3542) Previous to this, 'commit -A' would add as normal files, files that were already committed as largefiles, resulting in files being listed twice by 'status -A'. It also missed when (only) a largefile was deleted, even though status reported it as '!'. This also has the side effect of properly reporting the state of the affected largefiles in the post commit hook after a remove that also affected a normal file (the largefiles used to be 'R', now are properly absent). Since scmutil.addremove() is called both by the ui command (after some trivial argument validation) and during the commit process when -A is specified, it seems like a more appropriate method to wrap than the addremove command. Currently, a repo is only enabled to use largefiles after an add that explicitly identifies some file as large, and a subsequent commit. Therefore, this patch only changes behavior after such a largefile enabling commit. Note that in the test, if the final commit had a '-v', 'removing large8' would be printed twice. Both of these originate in removelargefiles(). The first print is in verbose mode after traversing remove + forget, the second is because the '_isaddremove' attr is set and 'after' is not.
author Matt Harbison <matt_harbison@yahoo.com>
date Mon, 30 Jul 2012 20:56:41 -0400
parents 3dd6da761fff
children 2da47de36b6f
line wrap: on
line source

  $ "$TESTDIR/hghave" svn13 || exit 80

  $ svnupanddisplay()
  > {
  >     (
  >        cd $1;
  >        svn up -q;
  >        svn st -v | sed 's/  */ /g' | sort
  >        limit=''
  >        if [ $2 -gt 0 ]; then
  >            limit="--limit=$2"
  >        fi
  >        svn log --xml -v $limit | python "$TESTDIR/svnxml.py"
  >     )
  > }

  $ cat >> $HGRCPATH <<EOF
  > [extensions]
  > convert = 
  > graphlog =
  > EOF

  $ hg init a

Add

  $ echo a > a/a
  $ mkdir -p a/d1/d2
  $ echo b > a/d1/d2/b
  $ hg --cwd a ci -d '0 0' -A -m 'add a file'
  adding a
  adding d1/d2/b

Modify

  $ "$TESTDIR/svn-safe-append.py" a a/a
  $ hg --cwd a ci -d '1 0' -m 'modify a file'
  $ hg --cwd a tip -q
  1:e0e2b8a9156b

  $ hg convert -d svn a
  assuming destination a-hg
  initializing svn repository 'a-hg'
  initializing svn working copy 'a-hg-wc'
  scanning source...
  sorting...
  converting...
  1 add a file
  0 modify a file
  $ svnupanddisplay a-hg-wc 2
   2 1 test d1
   2 1 test d1/d2 (glob)
   2 1 test d1/d2/b (glob)
   2 2 test .
   2 2 test a
  revision: 2
  author: test
  msg: modify a file
   M /a
  revision: 1
  author: test
  msg: add a file
   A /a
   A /d1
   A /d1/d2
   A /d1/d2/b
  $ ls a a-hg-wc
  a:
  a
  d1
  
  a-hg-wc:
  a
  d1
  $ cmp a/a a-hg-wc/a

Rename

  $ hg --cwd a mv a b
  $ hg --cwd a ci -d '2 0' -m 'rename a file'
  $ hg --cwd a tip -q
  2:eb5169441d43

  $ hg convert -d svn a
  assuming destination a-hg
  initializing svn working copy 'a-hg-wc'
  scanning source...
  sorting...
  converting...
  0 rename a file
  $ svnupanddisplay a-hg-wc 1
   3 1 test d1
   3 1 test d1/d2 (glob)
   3 1 test d1/d2/b (glob)
   3 3 test .
   3 3 test b
  revision: 3
  author: test
  msg: rename a file
   D /a
   A /b (from /a@2)
  $ ls a a-hg-wc
  a:
  b
  d1
  
  a-hg-wc:
  b
  d1

Copy

  $ hg --cwd a cp b c

  $ hg --cwd a ci -d '3 0' -m 'copy a file'
  $ hg --cwd a tip -q
  3:60effef6ab48

  $ hg convert -d svn a
  assuming destination a-hg
  initializing svn working copy 'a-hg-wc'
  scanning source...
  sorting...
  converting...
  0 copy a file
  $ svnupanddisplay a-hg-wc 1
   4 1 test d1
   4 1 test d1/d2 (glob)
   4 1 test d1/d2/b (glob)
   4 3 test b
   4 4 test .
   4 4 test c
  revision: 4
  author: test
  msg: copy a file
   A /c (from /b@3)
  $ ls a a-hg-wc
  a:
  b
  c
  d1
  
  a-hg-wc:
  b
  c
  d1

  $ hg --cwd a rm b

Remove

  $ hg --cwd a ci -d '4 0' -m 'remove a file'
  $ hg --cwd a tip -q
  4:87bbe3013fb6

  $ hg convert -d svn a
  assuming destination a-hg
  initializing svn working copy 'a-hg-wc'
  scanning source...
  sorting...
  converting...
  0 remove a file
  $ svnupanddisplay a-hg-wc 1
   5 1 test d1
   5 1 test d1/d2 (glob)
   5 1 test d1/d2/b (glob)
   5 4 test c
   5 5 test .
  revision: 5
  author: test
  msg: remove a file
   D /b
  $ ls a a-hg-wc
  a:
  c
  d1
  
  a-hg-wc:
  c
  d1

Executable

#if execbit
  $ chmod +x a/c
#else
  $ echo fake >> a/c
#endif
  $ hg --cwd a ci -d '5 0' -m 'make a file executable'
#if execbit
  $ hg --cwd a tip -q
  5:ff42e473c340
#else
  $ hg --cwd a tip -q
  5:817a700c8cf1
#endif

  $ hg convert -d svn a
  assuming destination a-hg
  initializing svn working copy 'a-hg-wc'
  scanning source...
  sorting...
  converting...
  0 make a file executable
  $ svnupanddisplay a-hg-wc 1
   6 1 test d1
   6 1 test d1/d2 (glob)
   6 1 test d1/d2/b (glob)
   6 6 test .
   6 6 test c
  revision: 6
  author: test
  msg: make a file executable
   M /c
#if execbit
  $ test -x a-hg-wc/c
#endif

#if symlink

Symlinks

  $ ln -s a/missing a/link
  $ hg --cwd a commit -Am 'add symlink'
  adding link
  $ hg --cwd a mv link newlink
  $ hg --cwd a commit -m 'move symlink'
  $ hg convert -d svn a
  assuming destination a-hg
  initializing svn working copy 'a-hg-wc'
  scanning source...
  sorting...
  converting...
  1 add symlink
  0 move symlink
  $ svnupanddisplay a-hg-wc 1
   8 1 test d1
   8 1 test d1/d2
   8 1 test d1/d2/b
   8 6 test c
   8 8 test .
   8 8 test newlink
  revision: 8
  author: test
  msg: move symlink
   D /link
   A /newlink (from /link@7)

#endif

  $ rm -rf a a-hg a-hg-wc


Executable in new directory

  $ hg init a

  $ mkdir a/d1
  $ echo a > a/d1/a
#if execbit
  $ chmod +x a/d1/a
#else
  $ echo fake >> a/d1/a
#endif
  $ hg --cwd a ci -d '0 0' -A -m 'add executable file in new directory'
  adding d1/a

  $ hg convert -d svn a
  assuming destination a-hg
  initializing svn repository 'a-hg'
  initializing svn working copy 'a-hg-wc'
  scanning source...
  sorting...
  converting...
  0 add executable file in new directory
  $ svnupanddisplay a-hg-wc 1
   1 1 test .
   1 1 test d1
   1 1 test d1/a (glob)
  revision: 1
  author: test
  msg: add executable file in new directory
   A /d1
   A /d1/a
#if execbit
  $ test -x a-hg-wc/d1/a
#endif

Copy to new directory

  $ mkdir a/d2
  $ hg --cwd a cp d1/a d2/a
  $ hg --cwd a ci -d '1 0' -A -m 'copy file to new directory'

  $ hg convert -d svn a
  assuming destination a-hg
  initializing svn working copy 'a-hg-wc'
  scanning source...
  sorting...
  converting...
  0 copy file to new directory
  $ svnupanddisplay a-hg-wc 1
   2 1 test d1
   2 1 test d1/a (glob)
   2 2 test .
   2 2 test d2
   2 2 test d2/a (glob)
  revision: 2
  author: test
  msg: copy file to new directory
   A /d2
   A /d2/a (from /d1/a@1)

Branchy history

  $ hg init b
  $ echo base > b/b
  $ hg --cwd b ci -d '0 0' -Ambase
  adding b

  $ "$TESTDIR/svn-safe-append.py" left-1 b/b
  $ echo left-1 > b/left-1
  $ hg --cwd b ci -d '1 0' -Amleft-1
  adding left-1

  $ "$TESTDIR/svn-safe-append.py" left-2 b/b
  $ echo left-2 > b/left-2
  $ hg --cwd b ci -d '2 0' -Amleft-2
  adding left-2

  $ hg --cwd b up 0
  1 files updated, 0 files merged, 2 files removed, 0 files unresolved

  $ "$TESTDIR/svn-safe-append.py" right-1 b/b
  $ echo right-1 > b/right-1
  $ hg --cwd b ci -d '3 0' -Amright-1
  adding right-1
  created new head

  $ "$TESTDIR/svn-safe-append.py" right-2 b/b
  $ echo right-2 > b/right-2
  $ hg --cwd b ci -d '4 0' -Amright-2
  adding right-2

  $ hg --cwd b up -C 2
  3 files updated, 0 files merged, 2 files removed, 0 files unresolved
  $ hg --cwd b merge
  merging b
  warning: conflicts during merge.
  merging b incomplete! (edit conflicts, then use 'hg resolve --mark')
  2 files updated, 0 files merged, 0 files removed, 1 files unresolved
  use 'hg resolve' to retry unresolved file merges or 'hg update -C .' to abandon
  [1]
  $ hg --cwd b revert -r 2 b
  $ hg --cwd b resolve -m b
  $ hg --cwd b ci -d '5 0' -m 'merge'

Expect 4 changes

  $ hg convert -d svn b
  assuming destination b-hg
  initializing svn repository 'b-hg'
  initializing svn working copy 'b-hg-wc'
  scanning source...
  sorting...
  converting...
  5 base
  4 left-1
  3 left-2
  2 right-1
  1 right-2
  0 merge

  $ svnupanddisplay b-hg-wc 0
   4 2 test left-1
   4 3 test b
   4 3 test left-2
   4 4 test .
   4 4 test right-1
   4 4 test right-2
  revision: 4
  author: test
  msg: merge
   A /right-1
   A /right-2
  revision: 3
  author: test
  msg: left-2
   M /b
   A /left-2
  revision: 2
  author: test
  msg: left-1
   M /b
   A /left-1
  revision: 1
  author: test
  msg: base
   A /b

Tags are not supported, but must not break conversion

  $ rm -rf a a-hg a-hg-wc
  $ hg init a
  $ echo a > a/a
  $ hg --cwd a ci -d '0 0' -A -m 'Add file a'
  adding a
  $ hg --cwd a tag -d '1 0' -m 'Tagged as v1.0' v1.0

  $ hg convert -d svn a
  assuming destination a-hg
  initializing svn repository 'a-hg'
  initializing svn working copy 'a-hg-wc'
  scanning source...
  sorting...
  converting...
  1 Add file a
  0 Tagged as v1.0
  writing Subversion tags is not yet implemented
  $ svnupanddisplay a-hg-wc 2
   2 1 test a
   2 2 test .
   2 2 test .hgtags
  revision: 2
  author: test
  msg: Tagged as v1.0
   A /.hgtags
  revision: 1
  author: test
  msg: Add file a
   A /a
  $ rm -rf a a-hg a-hg-wc