view tests/test-convert-svn-source.t @ 17658:a02c1ffddae9 stable

largefiles: handle commit -A properly, after a --large commit (issue3542)

Previous to this, 'commit -A' would add as normal files, files that were already
committed as largefiles, resulting in files being listed twice by 'status -A'.
It also missed when (only) a largefile was deleted, even though status reported
it as '!'.  This also has the side effect of properly reporting the state of the
affected largefiles in the post commit hook after a remove that also affected a
normal file (the largefiles used to be 'R', now are properly absent).

Since scmutil.addremove() is called both by the ui command (after some trivial
argument validation) and during the commit process when -A is specified, it
seems like a more appropriate method to wrap than the addremove command.

Currently, a repo is only enabled to use largefiles after an add that explicitly
identifies some file as large, and a subsequent commit.  Therefore, this patch
only changes behavior after such a largefile enabling commit.

Note that in the test, if the final commit had a '-v', 'removing large8' would
be printed twice.  Both of these originate in removelargefiles().  The first
print is in verbose mode after traversing remove + forget, the second is because
the '_isaddremove' attr is set and 'after' is not.

  $ "$TESTDIR/hghave" svn svn-bindings || exit 80

  $ cat >> $HGRCPATH <<EOF
  > [extensions]
  > convert = 
  > graphlog =
  > [convert]
  > svn.trunk = mytrunk
  > EOF

  $ svnadmin create svn-repo
  $ SVNREPOPATH=`pwd`/svn-repo
#if windows
  $ SVNREPOURL=file:///`python -c "import urllib, sys; sys.stdout.write(urllib.quote(sys.argv[1]))" "$SVNREPOPATH"`
#else
  $ SVNREPOURL=file://`python -c "import urllib, sys; sys.stdout.write(urllib.quote(sys.argv[1]))" "$SVNREPOPATH"`
#endif

Now test that it works with trunk/tags layout, but no branches yet.

Initial svn import

  $ mkdir projB
  $ cd projB
  $ mkdir mytrunk
  $ mkdir tags
  $ cd ..

  $ svn import -m "init projB" projB "$SVNREPOURL/proj%20B" | sort
  
  Adding         projB/mytrunk (glob)
  Adding         projB/tags (glob)
  Committed revision 1.

Update svn repository

  $ svn co "$SVNREPOURL/proj%20B/mytrunk" B
  Checked out revision 1.
  $ cd B
  $ echo hello > 'letter .txt'
  $ svn add 'letter .txt'
  A         letter .txt
  $ svn ci -m hello
  Adding         letter .txt
  Transmitting file data .
  Committed revision 2.

  $ "$TESTDIR/svn-safe-append.py" world 'letter .txt'
  $ svn ci -m world
  Sending        letter .txt
  Transmitting file data .
  Committed revision 3.

  $ svn copy -m "tag v0.1" "$SVNREPOURL/proj%20B/mytrunk" "$SVNREPOURL/proj%20B/tags/v0.1"
  
  Committed revision 4.

  $ "$TESTDIR/svn-safe-append.py" 'nice day today!' 'letter .txt'
  $ svn ci -m "nice day"
  Sending        letter .txt
  Transmitting file data .
  Committed revision 5.
  $ cd ..

Convert to hg once

  $ hg convert "$SVNREPOURL/proj%20B" B-hg
  initializing destination B-hg repository
  scanning source...
  sorting...
  converting...
  3 init projB
  2 hello
  1 world
  0 nice day
  updating tags

Update svn repository again

  $ cd B
  $ "$TESTDIR/svn-safe-append.py" "see second letter" 'letter .txt'
  $ echo "nice to meet you" > letter2.txt
  $ svn add letter2.txt
  A         letter2.txt
  $ svn ci -m "second letter"
  Sending        letter .txt
  Adding         letter2.txt
  Transmitting file data ..
  Committed revision 6.

  $ svn copy -m "tag v0.2" "$SVNREPOURL/proj%20B/mytrunk" "$SVNREPOURL/proj%20B/tags/v0.2"
  
  Committed revision 7.

  $ "$TESTDIR/svn-safe-append.py" "blah-blah-blah" letter2.txt
  $ svn ci -m "work in progress"
  Sending        letter2.txt
  Transmitting file data .
  Committed revision 8.
  $ cd ..

  $ hg convert -s svn "$SVNREPOURL/proj%20B/non-existent-path" dest
  initializing destination dest repository
  abort: no revision found in module /proj B/non-existent-path
  [255]

########################################

Test incremental conversion

  $ hg convert "$SVNREPOURL/proj%20B" B-hg
  scanning source...
  sorting...
  converting...
  1 second letter
  0 work in progress
  updating tags

  $ cd B-hg
  $ hg glog --template '{rev} {desc|firstline} files: {files}\n'
  o  7 update tags files: .hgtags
  |
  o  6 work in progress files: letter2.txt
  |
  o  5 second letter files: letter .txt letter2.txt
  |
  o  4 update tags files: .hgtags
  |
  o  3 nice day files: letter .txt
  |
  o  2 world files: letter .txt
  |
  o  1 hello files: letter .txt
  |
  o  0 init projB files:
  
  $ hg tags -q
  tip
  v0.2
  v0.1
  $ cd ..

Test filemap
  $ echo 'include letter2.txt' > filemap
  $ hg convert --filemap filemap "$SVNREPOURL/proj%20B/mytrunk" fmap
  initializing destination fmap repository
  scanning source...
  sorting...
  converting...
  5 init projB
  4 hello
  3 world
  2 nice day
  1 second letter
  0 work in progress
  $ hg -R fmap branch -q
  default
  $ hg glog -R fmap --template '{rev} {desc|firstline} files: {files}\n'
  o  1 work in progress files: letter2.txt
  |
  o  0 second letter files: letter2.txt
  

Test stop revision
  $ hg convert --rev 1 "$SVNREPOURL/proj%20B/mytrunk" stoprev
  initializing destination stoprev repository
  scanning source...
  sorting...
  converting...
  0 init projB
  $ hg -R stoprev branch -q
  default

Check convert_revision extra-records.
This is also the only place testing more than one extra field in a revision.

  $ cd stoprev
  $ hg tip --debug | grep extra
  extra:       branch=default
  extra:       convert_revision=svn:........-....-....-....-............/proj B/mytrunk@1 (re)
  $ cd ..

Test converting empty heads (issue3347)

  $ svnadmin create svn-empty
  $ svnadmin load -q svn-empty < "$TESTDIR/svn/empty.svndump"
  $ hg --config convert.svn.trunk= convert svn-empty
  assuming destination svn-empty-hg
  initializing destination svn-empty-hg repository
  scanning source...
  sorting...
  converting...
  1 init projA
  0 adddir
  $ hg --config convert.svn.trunk= convert "$SVNREPOURL/../svn-empty/trunk"
  assuming destination trunk-hg
  initializing destination trunk-hg repository
  scanning source...
  sorting...
  converting...
  1 init projA
  0 adddir