view tests/test-debugbuilddag.t @ 17658:a02c1ffddae9 stable

largefiles: handle commit -A properly, after a --large commit (issue3542) Previous to this, 'commit -A' would add as normal files, files that were already committed as largefiles, resulting in files being listed twice by 'status -A'. It also missed when (only) a largefile was deleted, even though status reported it as '!'. This also has the side effect of properly reporting the state of the affected largefiles in the post commit hook after a remove that also affected a normal file (the largefiles used to be 'R', now are properly absent). Since scmutil.addremove() is called both by the ui command (after some trivial argument validation) and during the commit process when -A is specified, it seems like a more appropriate method to wrap than the addremove command. Currently, a repo is only enabled to use largefiles after an add that explicitly identifies some file as large, and a subsequent commit. Therefore, this patch only changes behavior after such a largefile enabling commit. Note that in the test, if the final commit had a '-v', 'removing large8' would be printed twice. Both of these originate in removelargefiles(). The first print is in verbose mode after traversing remove + forget, the second is because the '_isaddremove' attr is set and 'after' is not.
author Matt Harbison <matt_harbison@yahoo.com>
date Mon, 30 Jul 2012 20:56:41 -0400
parents 709924be3d04
children 6047947afb6b
line wrap: on
line source

  $ echo "[extensions]" >> $HGRCPATH
  $ echo "graphlog=" >> $HGRCPATH

plain

  $ hg init
  $ hg debugbuilddag '+2:f +3:p2 @temp <f+4 @default /p2 +2' \
  > --config extensions.progress= --config progress.assume-tty=1 \
  > --config progress.delay=0 --config progress.refresh=0 \
  > --config progress.format=topic,bar,number \
  > --config progress.width=60 2>&1 | \
  > python "$TESTDIR/filtercr.py"
  
  building [                                          ]  0/12
  building [                                          ]  0/12
  building [                                          ]  0/12
  building [                                          ]  0/12
  building [==>                                       ]  1/12
  building [==>                                       ]  1/12
  building [==>                                       ]  1/12
  building [==>                                       ]  1/12
  building [======>                                   ]  2/12
  building [======>                                   ]  2/12
  building [=========>                                ]  3/12
  building [=========>                                ]  3/12
  building [=============>                            ]  4/12
  building [=============>                            ]  4/12
  building [=============>                            ]  4/12
  building [=============>                            ]  4/12
  building [=============>                            ]  4/12
  building [=============>                            ]  4/12
  building [================>                         ]  5/12
  building [================>                         ]  5/12
  building [====================>                     ]  6/12
  building [====================>                     ]  6/12
  building [=======================>                  ]  7/12
  building [=======================>                  ]  7/12
  building [===========================>              ]  8/12
  building [===========================>              ]  8/12
  building [===========================>              ]  8/12
  building [===========================>              ]  8/12
  building [==============================>           ]  9/12
  building [==============================>           ]  9/12
  building [==================================>       ] 10/12
  building [==================================>       ] 10/12
  building [=====================================>    ] 11/12
  building [=====================================>    ] 11/12
                                                              \r (esc)

tags
  $ cat .hg/localtags
  66f7d451a68b85ed82ff5fcc254daf50c74144bd f
  bebd167eb94d257ace0e814aeb98e6972ed2970d p2
dag
  $ hg debugdag -t -b
  +2:f
  +3:p2
  @temp*f+3
  @default*/p2+2:tip
tip
  $ hg id
  000000000000
glog
  $ hg glog --template '{rev}: {desc} [{branches}] @ {date}\n'
  o  11: r11 [] @ 11.00
  |
  o  10: r10 [] @ 10.00
  |
  o    9: r9 [] @ 9.00
  |\
  | o  8: r8 [temp] @ 8.00
  | |
  | o  7: r7 [temp] @ 7.00
  | |
  | o  6: r6 [temp] @ 6.00
  | |
  | o  5: r5 [temp] @ 5.00
  | |
  o |  4: r4 [] @ 4.00
  | |
  o |  3: r3 [] @ 3.00
  | |
  o |  2: r2 [] @ 2.00
  |/
  o  1: r1 [] @ 1.00
  |
  o  0: r0 [] @ 0.00
  

overwritten files, starting on a non-default branch

  $ rm -r .hg
  $ hg init
  $ hg debugbuilddag '@start.@default.:f +3:p2 @temp <f+4 @default /p2 +2' -q -o
tags
  $ cat .hg/localtags
  f778700ebd50fcf282b23a4446bd155da6453eb6 f
  bbccf169769006e2490efd2a02f11c3d38d462bd p2
dag
  $ hg debugdag -t -b
  @start+1
  @default+1:f
  +3:p2
  @temp*f+3
  @default*/p2+2:tip
tip
  $ hg id
  000000000000
glog
  $ hg glog --template '{rev}: {desc} [{branches}] @ {date}\n'
  o  11: r11 [] @ 11.00
  |
  o  10: r10 [] @ 10.00
  |
  o    9: r9 [] @ 9.00
  |\
  | o  8: r8 [temp] @ 8.00
  | |
  | o  7: r7 [temp] @ 7.00
  | |
  | o  6: r6 [temp] @ 6.00
  | |
  | o  5: r5 [temp] @ 5.00
  | |
  o |  4: r4 [] @ 4.00
  | |
  o |  3: r3 [] @ 3.00
  | |
  o |  2: r2 [] @ 2.00
  |/
  o  1: r1 [] @ 1.00
  |
  o  0: r0 [start] @ 0.00
  
glog of
  $ hg glog --template '{rev}: {desc} [{branches}]\n' of
  o  11: r11 []
  |
  o  10: r10 []
  |
  o    9: r9 []
  |\
  | o  8: r8 [temp]
  | |
  | o  7: r7 [temp]
  | |
  | o  6: r6 [temp]
  | |
  | o  5: r5 [temp]
  | |
  o |  4: r4 []
  | |
  o |  3: r3 []
  | |
  o |  2: r2 []
  |/
  o  1: r1 []
  |
  o  0: r0 [start]
  
tags
  $ hg tags -v
  tip                               11:9ffe238a67a2
  p2                                 4:bbccf1697690 local
  f                                  1:f778700ebd50 local
cat of
  $ hg cat of --rev tip
  r11


new and mergeable files

  $ rm -r .hg
  $ hg init
  $ hg debugbuilddag '+2:f +3:p2 @temp <f+4 @default /p2 +2' -q -mn
dag
  $ hg debugdag -t -b
  +2:f
  +3:p2
  @temp*f+3
  @default*/p2+2:tip
tip
  $ hg id
  000000000000
glog
  $ hg glog --template '{rev}: {desc} [{branches}] @ {date}\n'
  o  11: r11 [] @ 11.00
  |
  o  10: r10 [] @ 10.00
  |
  o    9: r9 [] @ 9.00
  |\
  | o  8: r8 [temp] @ 8.00
  | |
  | o  7: r7 [temp] @ 7.00
  | |
  | o  6: r6 [temp] @ 6.00
  | |
  | o  5: r5 [temp] @ 5.00
  | |
  o |  4: r4 [] @ 4.00
  | |
  o |  3: r3 [] @ 3.00
  | |
  o |  2: r2 [] @ 2.00
  |/
  o  1: r1 [] @ 1.00
  |
  o  0: r0 [] @ 0.00
  
glog mf
  $ hg glog --template '{rev}: {desc} [{branches}]\n' mf
  o  11: r11 []
  |
  o  10: r10 []
  |
  o    9: r9 []
  |\
  | o  8: r8 [temp]
  | |
  | o  7: r7 [temp]
  | |
  | o  6: r6 [temp]
  | |
  | o  5: r5 [temp]
  | |
  o |  4: r4 []
  | |
  o |  3: r3 []
  | |
  o |  2: r2 []
  |/
  o  1: r1 []
  |
  o  0: r0 []
  

man r4
  $ hg manifest -r4
  mf
  nf0
  nf1
  nf2
  nf3
  nf4
cat r4 mf
  $ hg cat -r4 mf
  0 r0
  1
  2 r1
  3
  4 r2
  5
  6 r3
  7
  8 r4
  9
  10
  11
  12
  13
  14
  15
  16
  17
  18
  19
  20
  21
  22
  23
man r8
  $ hg manifest -r8
  mf
  nf0
  nf1
  nf5
  nf6
  nf7
  nf8
cat r8 mf
  $ hg cat -r8 mf
  0 r0
  1
  2 r1
  3
  4
  5
  6
  7
  8
  9
  10 r5
  11
  12 r6
  13
  14 r7
  15
  16 r8
  17
  18
  19
  20
  21
  22
  23
man
  $ hg manifest --rev tip
  mf
  nf0
  nf1
  nf10
  nf11
  nf2
  nf3
  nf4
  nf5
  nf6
  nf7
  nf8
  nf9
cat mf
  $ hg cat mf --rev tip
  0 r0
  1
  2 r1
  3
  4 r2
  5
  6 r3
  7
  8 r4
  9
  10 r5
  11
  12 r6
  13
  14 r7
  15
  16 r8
  17
  18 r9
  19
  20 r10
  21
  22 r11
  23