view tests/test-eol.t @ 17658:a02c1ffddae9 stable

largefiles: handle commit -A properly, after a --large commit (issue3542)

Previous to this, 'commit -A' would add as normal files, files that were already
committed as largefiles, resulting in files being listed twice by 'status -A'.
It also missed when (only) a largefile was deleted, even though status reported
it as '!'.  This also has the side effect of properly reporting the state of the
affected largefiles in the post commit hook after a remove that also affected a
normal file (the largefiles used to be 'R', now are properly absent).

Since scmutil.addremove() is called both by the ui command (after some trivial
argument validation) and during the commit process when -A is specified, it
seems like a more appropriate method to wrap than the addremove command.

Currently, a repo is only enabled to use largefiles after an add that explicitly
identifies some file as large, and a subsequent commit.  Therefore, this patch
only changes behavior after such a largefile enabling commit.

Note that in the test, if the final commit had a '-v', 'removing large8' would
be printed twice.  Both of these originate in removelargefiles().  The first
print is in verbose mode after traversing remove + forget, the second is because
the '_isaddremove' attr is set and 'after' is not.

Test EOL extension

  $ cat >> $HGRCPATH <<EOF
  > [diff]
  > git = True
  > EOF

Set up helpers

  $ cat > switch-eol.py <<EOF
  > import sys
  > try:
  >     import os, msvcrt
  >     msvcrt.setmode(sys.stdin.fileno(), os.O_BINARY)
  >     msvcrt.setmode(sys.stdout.fileno(), os.O_BINARY)
  > except ImportError:
  >     pass
  > (old, new) = sys.argv[1] == 'LF' and ('\n', '\r\n') or ('\r\n', '\n')
  > print "%% switching encoding from %r to %r" % (old, new)
  > for path in sys.argv[2:]:
  >     data = file(path, 'rb').read()
  >     data = data.replace(old, new)
  >     file(path, 'wb').write(data)
  > EOF

  $ seteol () {
  >     if [ $1 = "LF" ]; then
  >         EOL='\n'
  >     else
  >         EOL='\r\n'
  >     fi
  > }

  $ makerepo () {
  >     seteol $1
  >     echo "% setup $1 repository"
  >     hg init repo
  >     cd repo
  >     cat > .hgeol <<EOF
  > [repository]
  > native = $1
  > [patterns]
  > mixed.txt = BIN
  > **.txt = native
  > EOF
  >     printf "first${EOL}second${EOL}third${EOL}" > a.txt
  >     hg commit --addremove -m 'checkin'
  >     echo
  >     cd ..
  > }

  $ dotest () {
  >     seteol $1
  >     echo "% hg clone repo repo-$1"
  >     hg clone --noupdate repo repo-$1
  >     cd repo-$1
  >     cat > .hg/hgrc <<EOF
  > [extensions]
  > eol =
  > [eol]
  > native = $1
  > EOF
  >     hg update
  >     echo '% a.txt'
  >     cat a.txt
  >     echo '% hg cat a.txt'
  >     hg cat a.txt
  >     printf "fourth${EOL}" >> a.txt
  >     echo '% a.txt'
  >     cat a.txt
  >     hg diff
  >     python ../switch-eol.py $1 a.txt
  >     echo '% hg diff only reports a single changed line:'
  >     hg diff
  >     echo "% reverting back to $1 format"
  >     hg revert a.txt
  >     cat a.txt
  >     printf "first\r\nsecond\n" > mixed.txt
  >     hg add mixed.txt
  >     echo "% hg commit of inconsistent .txt file marked as binary (should work)"
  >     hg commit -m 'binary file'
  >     echo "% hg commit of inconsistent .txt file marked as native (should fail)"
  >     printf "first\nsecond\r\nthird\nfourth\r\n" > a.txt
  >     hg commit -m 'inconsistent file'
  >     echo "% hg commit --config eol.only-consistent=False (should work)"
  >     hg commit --config eol.only-consistent=False -m 'inconsistent file'
  >     echo "% hg commit of binary .txt file marked as native (binary files always okay)"
  >     printf "first${EOL}\0${EOL}third${EOL}" > a.txt
  >     hg commit -m 'binary file'
  >     cd ..
  >     rm -r repo-$1
  > }

  $ makemixedrepo () {
  >     echo
  >     echo "# setup $1 repository"
  >     hg init mixed
  >     cd mixed
  >     printf "foo\r\nbar\r\nbaz\r\n" > win.txt
  >     printf "foo\nbar\nbaz\n" > unix.txt
  >     #printf "foo\r\nbar\nbaz\r\n" > mixed.txt
  >     hg commit --addremove -m 'created mixed files'
  >     echo "# setting repository-native EOLs to $1"
  >     cat > .hgeol <<EOF
  > [repository]
  > native = $1
  > [patterns]
  > **.txt = native
  > EOF
  >     hg commit --addremove -m 'added .hgeol'
  >     cd ..
  > }

  $ testmixed () {
  >     echo
  >     echo "% hg clone mixed mixed-$1"
  >     hg clone mixed mixed-$1
  >     cd mixed-$1
  >     echo '% hg status (eol extension not yet activated)'
  >     hg status
  >     cat > .hg/hgrc <<EOF
  > [extensions]
  > eol =
  > [eol]
  > native = $1
  > EOF
  >     echo '% hg status (eol activated)'
  >     hg status
  >     echo '% hg commit'
  >     hg commit -m 'synchronized EOLs'
  >     echo '% hg status'
  >     hg status
  >     cd ..
  >     rm -r mixed-$1
  > }

Basic tests

  $ makerepo LF
  % setup LF repository
  adding .hgeol
  adding a.txt
  
  $ dotest LF
  % hg clone repo repo-LF
  2 files updated, 0 files merged, 0 files removed, 0 files unresolved
  % a.txt
  first
  second
  third
  % hg cat a.txt
  first
  second
  third
  % a.txt
  first
  second
  third
  fourth
  diff --git a/a.txt b/a.txt
  --- a/a.txt
  +++ b/a.txt
  @@ -1,3 +1,4 @@
   first
   second
   third
  +fourth
  % switching encoding from '\n' to '\r\n'
  % hg diff only reports a single changed line:
  diff --git a/a.txt b/a.txt
  --- a/a.txt
  +++ b/a.txt
  @@ -1,3 +1,4 @@
   first
   second
   third
  +fourth
  % reverting back to LF format
  first
  second
  third
  % hg commit of inconsistent .txt file marked as binary (should work)
  % hg commit of inconsistent .txt file marked as native (should fail)
  abort: inconsistent newline style in a.txt
  
  % hg commit --config eol.only-consistent=False (should work)
  % hg commit of binary .txt file marked as native (binary files always okay)
  $ dotest CRLF
  % hg clone repo repo-CRLF
  2 files updated, 0 files merged, 0 files removed, 0 files unresolved
  % a.txt
  first\r (esc)
  second\r (esc)
  third\r (esc)
  % hg cat a.txt
  first
  second
  third
  % a.txt
  first\r (esc)
  second\r (esc)
  third\r (esc)
  fourth\r (esc)
  diff --git a/a.txt b/a.txt
  --- a/a.txt
  +++ b/a.txt
  @@ -1,3 +1,4 @@
   first
   second
   third
  +fourth
  % switching encoding from '\r\n' to '\n'
  % hg diff only reports a single changed line:
  diff --git a/a.txt b/a.txt
  --- a/a.txt
  +++ b/a.txt
  @@ -1,3 +1,4 @@
   first
   second
   third
  +fourth
  % reverting back to CRLF format
  first\r (esc)
  second\r (esc)
  third\r (esc)
  % hg commit of inconsistent .txt file marked as binary (should work)
  % hg commit of inconsistent .txt file marked as native (should fail)
  abort: inconsistent newline style in a.txt
  
  % hg commit --config eol.only-consistent=False (should work)
  % hg commit of binary .txt file marked as native (binary files always okay)
  $ rm -r repo
  $ makerepo CRLF
  % setup CRLF repository
  adding .hgeol
  adding a.txt
  
  $ dotest LF
  % hg clone repo repo-LF
  2 files updated, 0 files merged, 0 files removed, 0 files unresolved
  % a.txt
  first
  second
  third
  % hg cat a.txt
  first\r (esc)
  second\r (esc)
  third\r (esc)
  % a.txt
  first
  second
  third
  fourth
  diff --git a/a.txt b/a.txt
  --- a/a.txt
  +++ b/a.txt
  @@ -1,3 +1,4 @@
   first\r (esc)
   second\r (esc)
   third\r (esc)
  +fourth\r (esc)
  % switching encoding from '\n' to '\r\n'
  % hg diff only reports a single changed line:
  diff --git a/a.txt b/a.txt
  --- a/a.txt
  +++ b/a.txt
  @@ -1,3 +1,4 @@
   first\r (esc)
   second\r (esc)
   third\r (esc)
  +fourth\r (esc)
  % reverting back to LF format
  first
  second
  third
  % hg commit of inconsistent .txt file marked as binary (should work)
  % hg commit of inconsistent .txt file marked as native (should fail)
  abort: inconsistent newline style in a.txt
  
  % hg commit --config eol.only-consistent=False (should work)
  % hg commit of binary .txt file marked as native (binary files always okay)
  $ dotest CRLF
  % hg clone repo repo-CRLF
  2 files updated, 0 files merged, 0 files removed, 0 files unresolved
  % a.txt
  first\r (esc)
  second\r (esc)
  third\r (esc)
  % hg cat a.txt
  first\r (esc)
  second\r (esc)
  third\r (esc)
  % a.txt
  first\r (esc)
  second\r (esc)
  third\r (esc)
  fourth\r (esc)
  diff --git a/a.txt b/a.txt
  --- a/a.txt
  +++ b/a.txt
  @@ -1,3 +1,4 @@
   first\r (esc)
   second\r (esc)
   third\r (esc)
  +fourth\r (esc)
  % switching encoding from '\r\n' to '\n'
  % hg diff only reports a single changed line:
  diff --git a/a.txt b/a.txt
  --- a/a.txt
  +++ b/a.txt
  @@ -1,3 +1,4 @@
   first\r (esc)
   second\r (esc)
   third\r (esc)
  +fourth\r (esc)
  % reverting back to CRLF format
  first\r (esc)
  second\r (esc)
  third\r (esc)
  % hg commit of inconsistent .txt file marked as binary (should work)
  % hg commit of inconsistent .txt file marked as native (should fail)
  abort: inconsistent newline style in a.txt
  
  % hg commit --config eol.only-consistent=False (should work)
  % hg commit of binary .txt file marked as native (binary files always okay)
  $ rm -r repo

Mixed tests

  $ makemixedrepo LF
  
  # setup LF repository
  adding unix.txt
  adding win.txt
  # setting repository-native EOLs to LF
  adding .hgeol
  $ testmixed LF
  
  % hg clone mixed mixed-LF
  updating to branch default
  3 files updated, 0 files merged, 0 files removed, 0 files unresolved
  % hg status (eol extension not yet activated)
  % hg status (eol activated)
  M win.txt
  % hg commit
  % hg status
  $ testmixed CRLF
  
  % hg clone mixed mixed-CRLF
  updating to branch default
  3 files updated, 0 files merged, 0 files removed, 0 files unresolved
  % hg status (eol extension not yet activated)
  % hg status (eol activated)
  M win.txt
  % hg commit
  % hg status
  $ rm -r mixed
  $ makemixedrepo CRLF
  
  # setup CRLF repository
  adding unix.txt
  adding win.txt
  # setting repository-native EOLs to CRLF
  adding .hgeol
  $ testmixed LF
  
  % hg clone mixed mixed-LF
  updating to branch default
  3 files updated, 0 files merged, 0 files removed, 0 files unresolved
  % hg status (eol extension not yet activated)
  % hg status (eol activated)
  M unix.txt
  % hg commit
  % hg status
  $ testmixed CRLF
  
  % hg clone mixed mixed-CRLF
  updating to branch default
  3 files updated, 0 files merged, 0 files removed, 0 files unresolved
  % hg status (eol extension not yet activated)
  % hg status (eol activated)
  M unix.txt
  % hg commit
  % hg status
  $ rm -r mixed

  $ echo '[extensions]' >> $HGRCPATH
  $ echo 'eol =' >> $HGRCPATH

#if unix-permissions

Test issue2569 -- eol extension takes write lock on reading:

  $ hg init repo
  $ cd repo
  $ touch .hgeol
  $ hg status
  ? .hgeol
  $ chmod -R -w .hg
  $ sleep 1
  $ touch .hgeol
  $ hg status --traceback
  ? .hgeol
  $ chmod -R u+w .hg
  $ cd ..

#endif

Test cleverencode: and cleverdecode: aliases for win32text extension

  $ echo '[encode]' >> $HGRCPATH
  $ echo '**.txt = cleverencode:' >> $HGRCPATH
  $ echo '[decode]' >> $HGRCPATH
  $ echo '**.txt = cleverdecode:' >> $HGRCPATH

  $ hg init win32compat
  $ cd win32compat
  $ printf "foo\r\nbar\r\nbaz\r\n" > win.txt
  $ printf "foo\nbar\nbaz\n" > unix.txt
  $ hg add
  adding unix.txt
  adding win.txt
  $ hg commit -m checkin

Check that both files have LF line-endings in the repository:

  $ hg cat win.txt
  foo
  bar
  baz
  $ hg cat unix.txt
  foo
  bar
  baz

Test handling of a broken .hgeol file:

  $ touch .hgeol
  $ hg add .hgeol
  $ hg commit -m 'clean version'
  $ echo "bad" > .hgeol
  $ hg status
  warning: ignoring .hgeol file due to parse error at .hgeol:1: bad
  M .hgeol
  $ hg revert .hgeol
  warning: ignoring .hgeol file due to parse error at .hgeol:1: bad
  $ hg status
  ? .hgeol.orig

Test eol.only-consistent can be specified in .hgeol

  $ cd $TESTTMP
  $ hg init only-consistent
  $ cd only-consistent
  $ printf "first\nsecond\r\n" > a.txt
  $ hg add a.txt
  $ cat > .hgeol << EOF
  > [eol]
  > only-consistent = True
  > EOF
  $ hg commit -m 'inconsistent'
  abort: inconsistent newline style in a.txt
  
  [255]
  $ cat > .hgeol << EOF
  > [eol]
  > only-consistent = False
  > EOF
  $ hg commit -m 'consistent'


Test trailing newline

  $ cat >> $HGRCPATH <<EOF
  > [extensions]
  > eol=
  > EOF

setup repository

  $ cd $TESTTMP
  $ hg init trailing
  $ cd trailing
  $ cat > .hgeol <<EOF
  > [patterns]
  > **.txt = native
  > [eol]
  > fix-trailing-newline = False
  > EOF

add text without trailing newline

  $ printf "first\nsecond" > a.txt
  $ hg commit --addremove -m 'checking in'
  adding .hgeol
  adding a.txt
  $ rm a.txt
  $ hg update -C -q
  $ cat a.txt
  first
  second (no-eol)

  $ cat > .hgeol <<EOF
  > [patterns]
  > **.txt = native
  > [eol]
  > fix-trailing-newline = True
  > EOF
  $ printf "third\nfourth" > a.txt
  $ hg commit -m 'checking in with newline fix'
  $ rm a.txt
  $ hg update -C -q
  $ cat a.txt
  third
  fourth

append a line without trailing newline

  $ printf "fifth" >> a.txt
  $ hg commit -m 'adding another line line'
  $ rm a.txt
  $ hg update -C -q
  $ cat a.txt
  third
  fourth
  fifth

  $ cd ..