view tests/test-mq-guards.t @ 17658:a02c1ffddae9 stable

largefiles: handle commit -A properly, after a --large commit (issue3542)

Previous to this, 'commit -A' would add as normal files, files that were already
committed as largefiles, resulting in files being listed twice by 'status -A'.
It also missed when (only) a largefile was deleted, even though status reported
it as '!'.  This also has the side effect of properly reporting the state of the
affected largefiles in the post commit hook after a remove that also affected a
normal file (the largefiles used to be 'R', now are properly absent).

Since scmutil.addremove() is called both by the ui command (after some trivial
argument validation) and during the commit process when -A is specified, it
seems like a more appropriate method to wrap than the addremove command.

Currently, a repo is only enabled to use largefiles after an add that explicitly
identifies some file as large, and a subsequent commit.  Therefore, this patch
only changes behavior after such a largefile enabling commit.

Note that in the test, if the final commit had a '-v', 'removing large8' would
be printed twice.  Both of these originate in removelargefiles().  The first
print is in verbose mode after traversing remove + forget, the second is because
the '_isaddremove' attr is set and 'after' is not.

  $ echo "[extensions]" >> $HGRCPATH
  $ echo "mq=" >> $HGRCPATH

  $ hg init
  $ hg qinit

  $ echo x > x
  $ hg ci -Ama
  adding x

  $ hg qnew a.patch
  $ echo a > a
  $ hg add a
  $ hg qrefresh

  $ hg qnew b.patch
  $ echo b > b
  $ hg add b
  $ hg qrefresh

  $ hg qnew c.patch
  $ echo c > c
  $ hg add c
  $ hg qrefresh

  $ hg qpop -a
  popping c.patch
  popping b.patch
  popping a.patch
  patch queue now empty


should fail

  $ hg qguard does-not-exist.patch +bleh
  abort: no patch named does-not-exist.patch
  [255]


should fail

  $ hg qguard +fail
  abort: no patches applied
  [255]

  $ hg qpush
  applying a.patch
  now at: a.patch

should guard a.patch

  $ hg qguard +a

should print +a

  $ hg qguard
  a.patch: +a
  $ hg qpop
  popping a.patch
  patch queue now empty


should fail

  $ hg qpush a.patch
  cannot push 'a.patch' - guarded by '+a'
  [1]

  $ hg qguard a.patch
  a.patch: +a

should push b.patch

  $ hg qpush
  applying b.patch
  now at: b.patch

  $ hg qpop
  popping b.patch
  patch queue now empty

test selection of an empty guard

  $ hg qselect ""
  abort: guard cannot be an empty string
  [255]
  $ hg qselect a
  number of unguarded, unapplied patches has changed from 2 to 3

should push a.patch

  $ hg qpush
  applying a.patch
  now at: a.patch

  $ hg qguard -- c.patch -a

should print -a

  $ hg qguard c.patch
  c.patch: -a


should skip c.patch

  $ hg qpush -a
  applying b.patch
  skipping c.patch - guarded by '-a'
  now at: b.patch
  $ hg qnext
  all patches applied
  [1]

should display b.patch

  $ hg qtop
  b.patch

  $ hg qguard -n c.patch

should push c.patch

  $ hg qpush -a
  applying c.patch
  now at: c.patch

  $ hg qpop -a
  popping c.patch
  popping b.patch
  popping a.patch
  patch queue now empty
  $ hg qselect -n
  guards deactivated
  number of unguarded, unapplied patches has changed from 3 to 2

should push all

  $ hg qpush -a
  applying b.patch
  applying c.patch
  now at: c.patch

  $ hg qpop -a
  popping c.patch
  popping b.patch
  patch queue now empty
  $ hg qguard a.patch +1
  $ hg qguard b.patch +2
  $ hg qselect 1
  number of unguarded, unapplied patches has changed from 1 to 2

should push a.patch, not b.patch

  $ hg qpush
  applying a.patch
  now at: a.patch
  $ hg qpush
  applying c.patch
  now at: c.patch
  $ hg qpop -a
  popping c.patch
  popping a.patch
  patch queue now empty

  $ hg qselect 2

should push b.patch

  $ hg qpush
  applying b.patch
  now at: b.patch
  $ hg qpush -a
  applying c.patch
  now at: c.patch
  $ hg qprev
  b.patch

Used to be an issue with holes in the patch sequence
So, put one hole on the base and ask for topmost patch.

  $ hg qtop
  c.patch
  $ hg qpop -a
  popping c.patch
  popping b.patch
  patch queue now empty

  $ hg qselect 1 2
  number of unguarded, unapplied patches has changed from 2 to 3

should push a.patch, b.patch

  $ hg qpush
  applying a.patch
  now at: a.patch
  $ hg qpush
  applying b.patch
  now at: b.patch
  $ hg qpop -a
  popping b.patch
  popping a.patch
  patch queue now empty

  $ hg qguard -- a.patch +1 +2 -3
  $ hg qselect 1 2 3
  number of unguarded, unapplied patches has changed from 3 to 2


list patches and guards

  $ hg qguard -l
  a.patch: +1 +2 -3
  b.patch: +2
  c.patch: unguarded

have at least one patch applied to test coloring

  $ hg qpush
  applying b.patch
  now at: b.patch

list patches and guards with color

  $ hg --config extensions.color= qguard --config color.mode=ansi \
  >     -l --color=always
  \x1b[0;30;1ma.patch\x1b[0m: \x1b[0;33m+1\x1b[0m \x1b[0;33m+2\x1b[0m \x1b[0;31m-3\x1b[0m (esc)
  \x1b[0;34;1;4mb.patch\x1b[0m: \x1b[0;33m+2\x1b[0m (esc)
  \x1b[0;30;1mc.patch\x1b[0m: \x1b[0;32munguarded\x1b[0m (esc)

should pop b.patch

  $ hg qpop
  popping b.patch
  patch queue now empty

list series

  $ hg qseries -v
  0 G a.patch
  1 U b.patch
  2 U c.patch

list guards

  $ hg qselect
  1
  2
  3

should push b.patch

  $ hg qpush
  applying b.patch
  now at: b.patch

  $ hg qpush -a
  applying c.patch
  now at: c.patch
  $ hg qselect -n --reapply
  guards deactivated
  popping guarded patches
  popping c.patch
  popping b.patch
  patch queue now empty
  reapplying unguarded patches
  applying c.patch
  now at: c.patch

guards in series file: +1 +2 -3

  $ hg qselect -s
  +1
  +2
  -3

should show c.patch

  $ hg qapplied
  c.patch

  $ hg qrename a.patch new.patch

should show :


new.patch: +1 +2 -3


b.patch: +2


c.patch: unguarded

  $ hg qguard -l
  new.patch: +1 +2 -3
  b.patch: +2
  c.patch: unguarded

  $ hg qnew d.patch
  $ hg qpop
  popping d.patch
  now at: c.patch

should show new.patch and b.patch as Guarded, c.patch as Applied


and d.patch as Unapplied

  $ hg qseries -v
  0 G new.patch
  1 G b.patch
  2 A c.patch
  3 U d.patch

qseries again, but with color

  $ hg --config extensions.color= --config color.mode=ansi qseries -v --color=always
  0 G \x1b[0;30;1mnew.patch\x1b[0m (esc)
  1 G \x1b[0;30;1mb.patch\x1b[0m (esc)
  2 A \x1b[0;34;1;4mc.patch\x1b[0m (esc)
  3 U \x1b[0;30;1md.patch\x1b[0m (esc)

  $ hg qguard d.patch +2

new.patch, b.patch: Guarded. c.patch: Applied. d.patch: Guarded.

  $ hg qseries -v
  0 G new.patch
  1 G b.patch
  2 A c.patch
  3 G d.patch

  $ qappunappv()
  > {
  >     for command in qapplied "qapplied -v" qunapplied "qunapplied -v"; do
  >         echo % hg $command
  >         hg $command
  >     done
  > }

  $ hg qpop -a
  popping c.patch
  patch queue now empty
  $ hg qguard -l
  new.patch: +1 +2 -3
  b.patch: +2
  c.patch: unguarded
  d.patch: +2
  $ qappunappv
  % hg qapplied
  % hg qapplied -v
  % hg qunapplied
  c.patch
  % hg qunapplied -v
  0 G new.patch
  1 G b.patch
  2 U c.patch
  3 G d.patch
  $ hg qselect 1
  number of unguarded, unapplied patches has changed from 1 to 2
  $ qappunappv
  % hg qapplied
  % hg qapplied -v
  % hg qunapplied
  new.patch
  c.patch
  % hg qunapplied -v
  0 U new.patch
  1 G b.patch
  2 U c.patch
  3 G d.patch
  $ hg qpush -a
  applying new.patch
  skipping b.patch - guarded by '+2'
  applying c.patch
  skipping d.patch - guarded by '+2'
  now at: c.patch
  $ qappunappv
  % hg qapplied
  new.patch
  c.patch
  % hg qapplied -v
  0 A new.patch
  1 G b.patch
  2 A c.patch
  % hg qunapplied
  % hg qunapplied -v
  3 G d.patch
  $ hg qselect 2
  number of unguarded, unapplied patches has changed from 0 to 1
  number of guarded, applied patches has changed from 1 to 0
  $ qappunappv
  % hg qapplied
  new.patch
  c.patch
  % hg qapplied -v
  0 A new.patch
  1 U b.patch
  2 A c.patch
  % hg qunapplied
  d.patch
  % hg qunapplied -v
  3 U d.patch

  $ for patch in `hg qseries`; do
  >     echo % hg qapplied $patch
  >     hg qapplied $patch
  >     echo % hg qunapplied $patch
  >     hg qunapplied $patch
  > done
  % hg qapplied new.patch
  new.patch
  % hg qunapplied new.patch
  b.patch
  d.patch
  % hg qapplied b.patch
  new.patch
  % hg qunapplied b.patch
  d.patch
  % hg qapplied c.patch
  new.patch
  c.patch
  % hg qunapplied c.patch
  d.patch
  % hg qapplied d.patch
  new.patch
  c.patch
  % hg qunapplied d.patch


hg qseries -m: only b.patch should be shown
the guards file was not ignored in the past

  $ hg qdelete -k b.patch
  $ hg qseries -m
  b.patch

hg qseries -m with color

  $ hg --config extensions.color= --config color.mode=ansi qseries -m --color=always
  \x1b[0;31;1mb.patch\x1b[0m (esc)


excercise cornercases in "qselect --reapply"

  $ hg qpop -a
  popping c.patch
  popping new.patch
  patch queue now empty
  $ hg qguard -- new.patch -not-new
  $ hg qguard -- c.patch -not-c
  $ hg qguard -- d.patch -not-d
  $ hg qpush -a
  applying new.patch
  applying c.patch
  applying d.patch
  patch d.patch is empty
  now at: d.patch
  $ hg qguard -l
  new.patch: -not-new
  c.patch: -not-c
  d.patch: -not-d
  $ hg qselect --reapply not-d
  popping guarded patches
  popping d.patch
  now at: c.patch
  reapplying unguarded patches
  cannot push 'd.patch' - guarded by '-not-d'
  $ hg qser -v
  0 A new.patch
  1 A c.patch
  2 G d.patch
  $ hg qselect --reapply -n
  guards deactivated
  $ hg qpush
  applying d.patch
  patch d.patch is empty
  now at: d.patch
  $ hg qser -v
  0 A new.patch
  1 A c.patch
  2 A d.patch
  $ hg qselect --reapply not-c
  popping guarded patches
  popping d.patch
  popping c.patch
  now at: new.patch
  reapplying unguarded patches
  applying d.patch
  patch d.patch is empty
  now at: d.patch
  $ hg qser -v
  0 A new.patch
  1 G c.patch
  2 A d.patch
  $ hg qselect --reapply not-new
  popping guarded patches
  popping d.patch
  popping new.patch
  patch queue now empty
  reapplying unguarded patches
  applying c.patch
  applying d.patch
  patch d.patch is empty
  now at: d.patch
  $ hg qser -v
  0 G new.patch
  1 A c.patch
  2 A d.patch