view tests/test-mq-subrepo.t @ 17658:a02c1ffddae9 stable

largefiles: handle commit -A properly, after a --large commit (issue3542)

Previous to this, 'commit -A' would add as normal files, files that were already
committed as largefiles, resulting in files being listed twice by 'status -A'.
It also missed when (only) a largefile was deleted, even though status reported
it as '!'.  This also has the side effect of properly reporting the state of the
affected largefiles in the post commit hook after a remove that also affected a
normal file (the largefiles used to be 'R', now are properly absent).

Since scmutil.addremove() is called both by the ui command (after some trivial
argument validation) and during the commit process when -A is specified, it
seems like a more appropriate method to wrap than the addremove command.

Currently, a repo is only enabled to use largefiles after an add that explicitly
identifies some file as large, and a subsequent commit.  Therefore, this patch
only changes behavior after such a largefile enabling commit.

Note that in the test, if the final commit had a '-v', 'removing large8' would
be printed twice.  Both of these originate in removelargefiles().  The first
print is in verbose mode after traversing remove + forget, the second is because
the '_isaddremove' attr is set and 'after' is not.

  $ echo "[ui]" >> $HGRCPATH
  $ echo "commitsubrepos = Yes" >> $HGRCPATH
  $ echo "[extensions]" >> $HGRCPATH
  $ echo "mq=" >> $HGRCPATH
  $ echo "record=" >> $HGRCPATH
  $ echo "[diff]" >> $HGRCPATH
  $ echo "nodates=1" >> $HGRCPATH

  $ stdin=`pwd`/stdin.tmp

fn to create new repository w/dirty subrepo, and cd into it
  $ mkrepo() {
  >     hg init $1
  >     cd $1
  >     hg qinit
  > }

fn to create dirty subrepo
  $ mksubrepo() {
  >     hg init $1
  >     cd $1
  >     echo a > a
  >     hg add
  >     cd ..
  > }

  $ testadd() {
  >     cat - > "$stdin"
  >     mksubrepo sub
  >     echo sub = sub >> .hgsub
  >     hg add .hgsub
  >     echo % abort when adding .hgsub w/dirty subrepo
  >     hg status -S
  >     echo '%' $*
  >     cat "$stdin" | hg $*
  >     echo [$?]
  >     hg -R sub ci -m0sub
  >     echo % update substate when adding .hgsub w/clean updated subrepo
  >     hg status -S
  >     echo '%' $*
  >     cat "$stdin" | hg $*
  >     hg debugsub
  > }

  $ testmod() {
  >     cat - > "$stdin"
  >     mksubrepo sub2
  >     echo sub2 = sub2 >> .hgsub
  >     echo % abort when modifying .hgsub w/dirty subrepo
  >     hg status -S
  >     echo '%' $*
  >     cat "$stdin" | hg $*
  >     echo [$?]
  >     hg -R sub2 ci -m0sub2
  >     echo % update substate when modifying .hgsub w/clean updated subrepo
  >     hg status -S
  >     echo '%' $*
  >     cat "$stdin" | hg $*
  >     hg debugsub
  > }

  $ testrm1() {
  >     cat - > "$stdin"
  >     mksubrepo sub3
  >     echo sub3 = sub3 >> .hgsub
  >     hg ci -Aqmsub3
  >     $EXTRA
  >     echo b >> sub3/a
  >     hg rm .hgsub
  >     echo % update substate when removing .hgsub w/dirty subrepo
  >     hg status -S
  >     echo '%' $*
  >     cat "$stdin" | hg $*
  >     echo % debugsub should be empty
  >     hg debugsub
  > }

  $ testrm2() {
  >     cat - > "$stdin"
  >     mksubrepo sub4
  >     echo sub4 = sub4 >> .hgsub
  >     hg ci -Aqmsub4
  >     $EXTRA
  >     hg rm .hgsub
  >     echo % update substate when removing .hgsub w/clean updated subrepo
  >     hg status -S
  >     echo '%' $*
  >     cat "$stdin" | hg $*
  >     echo % debugsub should be empty
  >     hg debugsub
  > }


handle subrepos safely on qnew

  $ mkrepo repo-2499-qnew
  $ testadd qnew -m0 0.diff
  adding a
  % abort when adding .hgsub w/dirty subrepo
  A .hgsub
  A sub/a
  % qnew -m0 0.diff
  abort: uncommitted changes in subrepository sub
  [255]
  % update substate when adding .hgsub w/clean updated subrepo
  A .hgsub
  % qnew -m0 0.diff
  path sub
   source   sub
   revision b2fdb12cd82b021c3b7053d67802e77b6eeaee31

  $ testmod qnew -m1 1.diff
  adding a
  % abort when modifying .hgsub w/dirty subrepo
  M .hgsub
  A sub2/a
  % qnew -m1 1.diff
  abort: uncommitted changes in subrepository sub2
  [255]
  % update substate when modifying .hgsub w/clean updated subrepo
  M .hgsub
  % qnew -m1 1.diff
  path sub
   source   sub
   revision b2fdb12cd82b021c3b7053d67802e77b6eeaee31
  path sub2
   source   sub2
   revision 1f94c7611cc6b74f5a17b16121a1170d44776845

  $ hg qpop -qa
  patch queue now empty
  $ testrm1 qnew -m2 2.diff
  adding a
  % update substate when removing .hgsub w/dirty subrepo
  M sub3/a
  R .hgsub
  % qnew -m2 2.diff
  % debugsub should be empty

  $ hg qpop -qa
  patch queue now empty
  $ testrm2 qnew -m3 3.diff
  adding a
  % update substate when removing .hgsub w/clean updated subrepo
  R .hgsub
  % qnew -m3 3.diff
  % debugsub should be empty

  $ cd ..


handle subrepos safely on qrefresh

  $ mkrepo repo-2499-qrefresh
  $ hg qnew -m0 0.diff
  $ testadd qrefresh
  adding a
  % abort when adding .hgsub w/dirty subrepo
  A .hgsub
  A sub/a
  % qrefresh
  abort: uncommitted changes in subrepository sub
  [255]
  % update substate when adding .hgsub w/clean updated subrepo
  A .hgsub
  % qrefresh
  path sub
   source   sub
   revision b2fdb12cd82b021c3b7053d67802e77b6eeaee31

  $ hg qnew -m1 1.diff
  $ testmod qrefresh
  adding a
  % abort when modifying .hgsub w/dirty subrepo
  M .hgsub
  A sub2/a
  % qrefresh
  abort: uncommitted changes in subrepository sub2
  [255]
  % update substate when modifying .hgsub w/clean updated subrepo
  M .hgsub
  % qrefresh
  path sub
   source   sub
   revision b2fdb12cd82b021c3b7053d67802e77b6eeaee31
  path sub2
   source   sub2
   revision 1f94c7611cc6b74f5a17b16121a1170d44776845

  $ hg qpop -qa
  patch queue now empty
  $ EXTRA='hg qnew -m2 2.diff'
  $ testrm1 qrefresh
  adding a
  % update substate when removing .hgsub w/dirty subrepo
  M sub3/a
  R .hgsub
  % qrefresh
  % debugsub should be empty

  $ hg qpop -qa
  patch queue now empty
  $ EXTRA='hg qnew -m3 3.diff'
  $ testrm2 qrefresh
  adding a
  % update substate when removing .hgsub w/clean updated subrepo
  R .hgsub
  % qrefresh
  % debugsub should be empty
  $ EXTRA=

  $ cd ..


handle subrepos safely on qpush/qpop

  $ mkrepo repo-2499-qpush
  $ mksubrepo sub
  adding a
  $ hg -R sub ci -m0sub
  $ echo sub = sub > .hgsub
  $ hg add .hgsub
  $ hg qnew -m0 0.diff
  $ hg debugsub
  path sub
   source   sub
   revision b2fdb12cd82b021c3b7053d67802e77b6eeaee31

qpop
  $ hg qpop
  popping 0.diff
  patch queue now empty
  $ hg status -AS
  $ hg debugsub

qpush
  $ hg qpush
  applying 0.diff
  now at: 0.diff
  $ hg status -AS
  C .hgsub
  C .hgsubstate
  C sub/a
  $ hg debugsub
  path sub
   source   sub
   revision b2fdb12cd82b021c3b7053d67802e77b6eeaee31

  $ cd ..


handle subrepos safely on qrecord

  $ mkrepo repo-2499-qrecord
  $ testadd qrecord --config ui.interactive=1 -m0 0.diff <<EOF
  > y
  > y
  > EOF
  adding a
  % abort when adding .hgsub w/dirty subrepo
  A .hgsub
  A sub/a
  % qrecord --config ui.interactive=1 -m0 0.diff
  diff --git a/.hgsub b/.hgsub
  new file mode 100644
  examine changes to '.hgsub'? [Ynesfdaq?] 
  abort: uncommitted changes in subrepository sub
  [255]
  % update substate when adding .hgsub w/clean updated subrepo
  A .hgsub
  % qrecord --config ui.interactive=1 -m0 0.diff
  diff --git a/.hgsub b/.hgsub
  new file mode 100644
  examine changes to '.hgsub'? [Ynesfdaq?] 
  path sub
   source   sub
   revision b2fdb12cd82b021c3b7053d67802e77b6eeaee31

  $ testmod qrecord --config ui.interactive=1 -m1 1.diff <<EOF
  > y
  > y
  > EOF
  adding a
  % abort when modifying .hgsub w/dirty subrepo
  M .hgsub
  A sub2/a
  % qrecord --config ui.interactive=1 -m1 1.diff
  diff --git a/.hgsub b/.hgsub
  1 hunks, 1 lines changed
  examine changes to '.hgsub'? [Ynesfdaq?] 
  @@ -1,1 +1,2 @@
   sub = sub
  +sub2 = sub2
  record this change to '.hgsub'? [Ynesfdaq?] 
  abort: uncommitted changes in subrepository sub2
  [255]
  % update substate when modifying .hgsub w/clean updated subrepo
  M .hgsub
  % qrecord --config ui.interactive=1 -m1 1.diff
  diff --git a/.hgsub b/.hgsub
  1 hunks, 1 lines changed
  examine changes to '.hgsub'? [Ynesfdaq?] 
  @@ -1,1 +1,2 @@
   sub = sub
  +sub2 = sub2
  record this change to '.hgsub'? [Ynesfdaq?] 
  path sub
   source   sub
   revision b2fdb12cd82b021c3b7053d67802e77b6eeaee31
  path sub2
   source   sub2
   revision 1f94c7611cc6b74f5a17b16121a1170d44776845

  $ hg qpop -qa
  patch queue now empty
  $ testrm1 qrecord --config ui.interactive=1 -m2 2.diff <<EOF
  > y
  > y
  > EOF
  adding a
  % update substate when removing .hgsub w/dirty subrepo
  M sub3/a
  R .hgsub
  % qrecord --config ui.interactive=1 -m2 2.diff
  diff --git a/.hgsub b/.hgsub
  deleted file mode 100644
  examine changes to '.hgsub'? [Ynesfdaq?] 
  % debugsub should be empty

  $ hg qpop -qa
  patch queue now empty
  $ testrm2 qrecord --config ui.interactive=1 -m3 3.diff <<EOF
  > y
  > y
  > EOF
  adding a
  % update substate when removing .hgsub w/clean updated subrepo
  R .hgsub
  % qrecord --config ui.interactive=1 -m3 3.diff
  diff --git a/.hgsub b/.hgsub
  deleted file mode 100644
  examine changes to '.hgsub'? [Ynesfdaq?] 
  % debugsub should be empty

  $ cd ..


correctly handle subrepos with patch queues
  $ mkrepo repo-subrepo-with-queue
  $ mksubrepo sub
  adding a
  $ hg -R sub qnew sub0.diff
  $ echo sub = sub >> .hgsub
  $ hg add .hgsub
  $ hg qnew 0.diff

  $ cd ..

check whether MQ operations can import updated .hgsubstate correctly
both into 'revision' and 'patch file under .hg/patches':

  $ hg init importing-hgsubstate
  $ cd importing-hgsubstate

  $ echo a > a
  $ hg commit -u test -d '0 0' -Am '#0 in parent'
  adding a
  $ hg init sub
  $ echo sa > sub/sa
  $ hg -R sub commit -u test -d '0 0' -Am '#0 in sub'
  adding sa
  $ echo 'sub = sub' > .hgsub
  $ touch .hgsubstate
  $ hg add .hgsub .hgsubstate

  $ hg qnew -u test -d '0 0' import-at-qnew
  $ hg -R sub parents --template '{node} sub\n'
  b6f6e9c41f3dfd374a6d2ed4535c87951cf979cf sub
  $ cat .hgsubstate
  b6f6e9c41f3dfd374a6d2ed4535c87951cf979cf sub
  $ hg diff -c tip
  diff -r f499373e340c -r b20ffac88564 .hgsub
  --- /dev/null
  +++ b/.hgsub
  @@ -0,0 +1,1 @@
  +sub = sub
  diff -r f499373e340c -r b20ffac88564 .hgsubstate
  --- /dev/null
  +++ b/.hgsubstate
  @@ -0,0 +1,1 @@
  +b6f6e9c41f3dfd374a6d2ed4535c87951cf979cf sub
  $ cat .hg/patches/import-at-qnew
  # HG changeset patch
  # Parent f499373e340cdca5d01dee904aeb42dd2a325e71
  # User test
  # Date 0 0
  
  diff -r f499373e340c -r b20ffac88564 .hgsub
  --- /dev/null
  +++ b/.hgsub
  @@ -0,0 +1,1 @@
  +sub = sub
  diff -r f499373e340c -r b20ffac88564 .hgsubstate
  --- /dev/null
  +++ b/.hgsubstate
  @@ -0,0 +1,1 @@
  +b6f6e9c41f3dfd374a6d2ed4535c87951cf979cf sub
  $ hg qpop
  popping import-at-qnew
  patch queue now empty
  $ hg qpush
  applying import-at-qnew
  now at: import-at-qnew

  $ hg qnew import-at-qrefresh
  $ echo sb > sub/sb
  $ hg -R sub commit -u test -d '0 0' -Am '#1 in sub'
  adding sb
  $ hg qrefresh -u test -d '0 0'
  $ hg -R sub parents --template '{node} sub\n'
  88ac1bef5ed43b689d1d200b59886b675dec474b sub
  $ cat .hgsubstate
  88ac1bef5ed43b689d1d200b59886b675dec474b sub
  $ hg diff -c tip
  diff -r 44f846335325 -r b3e8c5fa3aaa .hgsubstate
  --- a/.hgsubstate
  +++ b/.hgsubstate
  @@ -1,1 +1,1 @@
  -b6f6e9c41f3dfd374a6d2ed4535c87951cf979cf sub
  +88ac1bef5ed43b689d1d200b59886b675dec474b sub
  $ cat .hg/patches/import-at-qrefresh
  # HG changeset patch
  # Date 0 0
  # User test
  # Parent 44f846335325209be6be35dc2c9a4be107278c09
  
  diff -r 44f846335325 .hgsubstate
  --- a/.hgsubstate
  +++ b/.hgsubstate
  @@ -1,1 +1,1 @@
  -b6f6e9c41f3dfd374a6d2ed4535c87951cf979cf sub
  +88ac1bef5ed43b689d1d200b59886b675dec474b sub

  $ hg qrefresh -u test -d '0 0'
  $ cat .hgsubstate
  88ac1bef5ed43b689d1d200b59886b675dec474b sub
  $ hg diff -c tip
  diff -r 44f846335325 -r b3e8c5fa3aaa .hgsubstate
  --- a/.hgsubstate
  +++ b/.hgsubstate
  @@ -1,1 +1,1 @@
  -b6f6e9c41f3dfd374a6d2ed4535c87951cf979cf sub
  +88ac1bef5ed43b689d1d200b59886b675dec474b sub
  $ cat .hg/patches/import-at-qrefresh
  # HG changeset patch
  # Date 0 0
  # User test
  # Parent 44f846335325209be6be35dc2c9a4be107278c09
  
  diff -r 44f846335325 .hgsubstate
  --- a/.hgsubstate
  +++ b/.hgsubstate
  @@ -1,1 +1,1 @@
  -b6f6e9c41f3dfd374a6d2ed4535c87951cf979cf sub
  +88ac1bef5ed43b689d1d200b59886b675dec474b sub

  $ hg update -C tip
  0 files updated, 0 files merged, 0 files removed, 0 files unresolved
  $ hg qpop -a
  popping import-at-qrefresh
  popping import-at-qnew
  patch queue now empty

  $ hg -R sub update -C 0
  0 files updated, 0 files merged, 1 files removed, 0 files unresolved
  $ echo 'sub = sub' > .hgsub
  $ hg commit -Am '#1 in parent'
  adding .hgsub
  $ hg -R sub update -C 1
  1 files updated, 0 files merged, 0 files removed, 0 files unresolved
  $ hg commit -Am '#2 in parent (but be rollbacked soon)'
  $ hg rollback
  repository tip rolled back to revision 1 (undo commit)
  working directory now based on revision 1
  $ hg status
  M .hgsubstate
  $ hg qnew -u test -d '0 0' checkstate-at-qnew
  $ hg -R sub parents --template '{node} sub\n'
  88ac1bef5ed43b689d1d200b59886b675dec474b sub
  $ cat .hgsubstate
  88ac1bef5ed43b689d1d200b59886b675dec474b sub
  $ hg diff -c tip
  diff -r 4d91eb2fa1d1 -r 1259c112d884 .hgsubstate
  --- a/.hgsubstate
  +++ b/.hgsubstate
  @@ -1,1 +1,1 @@
  -b6f6e9c41f3dfd374a6d2ed4535c87951cf979cf sub
  +88ac1bef5ed43b689d1d200b59886b675dec474b sub
  $ cat .hg/patches/checkstate-at-qnew
  # HG changeset patch
  # Parent 4d91eb2fa1d1b22ec513347b9cd06f6b49d470fa
  # User test
  # Date 0 0
  
  diff -r 4d91eb2fa1d1 -r 1259c112d884 .hgsubstate
  --- a/.hgsubstate
  +++ b/.hgsubstate
  @@ -1,1 +1,1 @@
  -b6f6e9c41f3dfd374a6d2ed4535c87951cf979cf sub
  +88ac1bef5ed43b689d1d200b59886b675dec474b sub

  $ cd ..

  $ cd ..