Mercurial > hg
view tests/test-notify.t @ 17658:a02c1ffddae9 stable
largefiles: handle commit -A properly, after a --large commit (issue3542)
Previous to this, 'commit -A' would add as normal files, files that were already
committed as largefiles, resulting in files being listed twice by 'status -A'.
It also missed when (only) a largefile was deleted, even though status reported
it as '!'. This also has the side effect of properly reporting the state of the
affected largefiles in the post commit hook after a remove that also affected a
normal file (the largefiles used to be 'R', now are properly absent).
Since scmutil.addremove() is called both by the ui command (after some trivial
argument validation) and during the commit process when -A is specified, it
seems like a more appropriate method to wrap than the addremove command.
Currently, a repo is only enabled to use largefiles after an add that explicitly
identifies some file as large, and a subsequent commit. Therefore, this patch
only changes behavior after such a largefile enabling commit.
Note that in the test, if the final commit had a '-v', 'removing large8' would
be printed twice. Both of these originate in removelargefiles(). The first
print is in verbose mode after traversing remove + forget, the second is because
the '_isaddremove' attr is set and 'after' is not.
author | Matt Harbison <matt_harbison@yahoo.com> |
---|---|
date | Mon, 30 Jul 2012 20:56:41 -0400 |
parents | 0fdd8193c8b5 |
children | 19e9bf7c0927 |
line wrap: on
line source
$ cat <<EOF >> $HGRCPATH > [extensions] > notify= > > [hooks] > incoming.notify = python:hgext.notify.hook > > [notify] > sources = pull > diffstat = False > > [usersubs] > foo@bar = * > > [reposubs] > * = baz > EOF $ hg help notify notify extension - hooks for sending email push notifications This extension implements hooks to send email notifications when changesets are sent from or received by the local repository. First, enable the extension as explained in "hg help extensions", and register the hook you want to run. "incoming" and "changegroup" hooks are run when changesets are received, while "outgoing" hooks are for changesets sent to another repository: [hooks] # one email for each incoming changeset incoming.notify = python:hgext.notify.hook # one email for all incoming changesets changegroup.notify = python:hgext.notify.hook # one email for all outgoing changesets outgoing.notify = python:hgext.notify.hook This registers the hooks. To enable notification, subscribers must be assigned to repositories. The "[usersubs]" section maps multiple repositories to a given recipient. The "[reposubs]" section maps multiple recipients to a single repository: [usersubs] # key is subscriber email, value is a comma-separated list of repo glob # patterns user@host = pattern [reposubs] # key is glob pattern, value is a comma-separated list of subscriber # emails pattern = user@host Glob patterns are matched against absolute path to repository root. In order to place them under direct user management, "[usersubs]" and "[reposubs]" sections may be placed in a separate "hgrc" file and incorporated by reference: [notify] config = /path/to/subscriptionsfile Notifications will not be sent until the "notify.test" value is set to "False"; see below. Notifications content can be tweaked with the following configuration entries: notify.test If "True", print messages to stdout instead of sending them. Default: True. notify.sources Space-separated list of change sources. Notifications are activated only when a changeset's source is in this list. Sources may be: "serve" changesets received via http or ssh "pull" changesets received via "hg pull" "unbundle" changesets received via "hg unbundle" "push" changesets sent or received via "hg push" "bundle" changesets sent via "hg unbundle" Default: serve. notify.strip Number of leading slashes to strip from url paths. By default, notifications reference repositories with their absolute path. "notify.strip" lets you turn them into relative paths. For example, "notify.strip=3" will change "/long/path/repository" into "repository". Default: 0. notify.domain Default email domain for sender or recipients with no explicit domain. notify.style Style file to use when formatting emails. notify.template Template to use when formatting emails. notify.incoming Template to use when run as an incoming hook, overriding "notify.template". notify.outgoing Template to use when run as an outgoing hook, overriding "notify.template". notify.changegroup Template to use when running as a changegroup hook, overriding "notify.template". notify.maxdiff Maximum number of diff lines to include in notification email. Set to 0 to disable the diff, or -1 to include all of it. Default: 300. notify.maxsubject Maximum number of characters in email's subject line. Default: 67. notify.diffstat Set to True to include a diffstat before diff content. Default: True. notify.merge If True, send notifications for merge changesets. Default: True. notify.mbox If set, append mails to this mbox file instead of sending. Default: None. notify.fromauthor If set, use the committer of the first changeset in a changegroup for the "From" field of the notification mail. If not set, take the user from the pushing repo. Default: False. If set, the following entries will also be used to customize the notifications: email.from Email "From" address to use if none can be found in the generated email content. web.baseurl Root repository URL to combine with repository paths when making references. See also "notify.strip". no commands defined $ hg init a $ echo a > a/a commit $ hg --cwd a commit -Ama -d '0 0' adding a clone $ hg --traceback clone a b updating to branch default 1 files updated, 0 files merged, 0 files removed, 0 files unresolved $ echo a >> a/a commit $ hg --traceback --cwd a commit -Amb -d '1 0' on Mac OS X 10.5 the tmp path is very long so would get stripped in the subject line $ cat <<EOF >> $HGRCPATH > [notify] > maxsubject = 200 > EOF the python call below wraps continuation lines, which appear on Mac OS X 10.5 because of the very long subject line pull (minimal config) $ hg --traceback --cwd b pull ../a | \ > python -c 'import sys,re; print re.sub("\n[\t ]", " ", sys.stdin.read()),' pulling from ../a searching for changes adding changesets adding manifests adding file changes added 1 changesets with 1 changes to 1 files Content-Type: text/plain; charset="us-ascii" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit Date: * (glob) Subject: changeset in $TESTTMP/b: b From: test X-Hg-Notification: changeset 0647d048b600 Message-Id: <*> (glob) To: baz, foo@bar changeset 0647d048b600 in $TESTTMP/b (glob) details: $TESTTMP/b?cmd=changeset;node=0647d048b600 description: b diffs (6 lines): diff -r cb9a9f314b8b -r 0647d048b600 a --- a/a Thu Jan 01 00:00:00 1970 +0000 +++ b/a Thu Jan 01 00:00:01 1970 +0000 @@ -1,1 +1,2 @@ a +a (run 'hg update' to get a working copy) $ cat <<EOF >> $HGRCPATH > [notify] > config = `pwd`/.notify.conf > domain = test.com > strip = 42 > template = Subject: {desc|firstline|strip}\nFrom: {author}\nX-Test: foo\n\nchangeset {node|short} in {webroot}\ndescription:\n\t{desc|tabindent|strip} > > [web] > baseurl = http://test/ > EOF fail for config file is missing $ hg --cwd b rollback repository tip rolled back to revision 0 (undo pull) $ hg --cwd b pull ../a 2>&1 | grep 'error.*\.notify\.conf' > /dev/null && echo pull failed pull failed $ touch ".notify.conf" pull $ hg --cwd b rollback repository tip rolled back to revision 0 (undo pull) $ hg --traceback --cwd b pull ../a | \ > python -c 'import sys,re; print re.sub("\n\t", " ", sys.stdin.read()),' pulling from ../a searching for changes adding changesets adding manifests adding file changes added 1 changesets with 1 changes to 1 files Content-Type: text/plain; charset="us-ascii" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Test: foo Date: * (glob) Subject: b From: test@test.com X-Hg-Notification: changeset 0647d048b600 Message-Id: <*> (glob) To: baz@test.com, foo@bar changeset 0647d048b600 in b description: b diffs (6 lines): diff -r cb9a9f314b8b -r 0647d048b600 a --- a/a Thu Jan 01 00:00:00 1970 +0000 +++ b/a Thu Jan 01 00:00:01 1970 +0000 @@ -1,1 +1,2 @@ a +a (run 'hg update' to get a working copy) $ cat << EOF >> $HGRCPATH > [hooks] > incoming.notify = python:hgext.notify.hook > > [notify] > sources = pull > diffstat = True > EOF pull $ hg --cwd b rollback repository tip rolled back to revision 0 (undo pull) $ hg --traceback --cwd b pull ../a | \ > python -c 'import sys,re; print re.sub("\n\t", " ", sys.stdin.read()),' pulling from ../a searching for changes adding changesets adding manifests adding file changes added 1 changesets with 1 changes to 1 files Content-Type: text/plain; charset="us-ascii" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Test: foo Date: * (glob) Subject: b From: test@test.com X-Hg-Notification: changeset 0647d048b600 Message-Id: <*> (glob) To: baz@test.com, foo@bar changeset 0647d048b600 in b description: b diffstat: a | 1 + 1 files changed, 1 insertions(+), 0 deletions(-) diffs (6 lines): diff -r cb9a9f314b8b -r 0647d048b600 a --- a/a Thu Jan 01 00:00:00 1970 +0000 +++ b/a Thu Jan 01 00:00:01 1970 +0000 @@ -1,1 +1,2 @@ a +a (run 'hg update' to get a working copy) test merge $ cd a $ hg up -C 0 1 files updated, 0 files merged, 0 files removed, 0 files unresolved $ echo a >> a $ hg ci -Am adda2 -d '2 0' created new head $ hg merge 0 files updated, 0 files merged, 0 files removed, 0 files unresolved (branch merge, don't forget to commit) $ hg ci -m merge -d '3 0' $ cd .. $ hg --traceback --cwd b pull ../a | \ > python -c 'import sys,re; print re.sub("\n\t", " ", sys.stdin.read()),' pulling from ../a searching for changes adding changesets adding manifests adding file changes added 2 changesets with 0 changes to 0 files Content-Type: text/plain; charset="us-ascii" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Test: foo Date: * (glob) Subject: adda2 From: test@test.com X-Hg-Notification: changeset 0a184ce6067f Message-Id: <*> (glob) To: baz@test.com, foo@bar changeset 0a184ce6067f in b description: adda2 diffstat: a | 1 + 1 files changed, 1 insertions(+), 0 deletions(-) diffs (6 lines): diff -r cb9a9f314b8b -r 0a184ce6067f a --- a/a Thu Jan 01 00:00:00 1970 +0000 +++ b/a Thu Jan 01 00:00:02 1970 +0000 @@ -1,1 +1,2 @@ a +a Content-Type: text/plain; charset="us-ascii" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Test: foo Date: * (glob) Subject: merge From: test@test.com X-Hg-Notification: changeset 6a0cf76b2701 Message-Id: <*> (glob) To: baz@test.com, foo@bar changeset 6a0cf76b2701 in b description: merge (run 'hg update' to get a working copy) non-ascii content and truncation of multi-byte subject $ cat <<EOF >> $HGRCPATH > [notify] > maxsubject = 4 > EOF $ echo a >> a/a $ hg --cwd a --encoding utf-8 commit -A -d '0 0' \ > -m `python -c 'print "\xc3\xa0\xc3\xa1\xc3\xa2\xc3\xa3\xc3\xa4"'` $ hg --traceback --cwd b --encoding utf-8 pull ../a | \ > python -c 'import sys,re; print re.sub("\n\t", " ", sys.stdin.read()),' pulling from ../a searching for changes adding changesets adding manifests adding file changes added 1 changesets with 1 changes to 1 files Content-Type: text/plain; charset="us-ascii" MIME-Version: 1.0 Content-Transfer-Encoding: 8bit X-Test: foo Date: * (glob) Subject: \xc3\xa0... (esc) From: test@test.com X-Hg-Notification: changeset 7ea05ad269dc Message-Id: <*> (glob) To: baz@test.com, foo@bar changeset 7ea05ad269dc in b description: \xc3\xa0\xc3\xa1\xc3\xa2\xc3\xa3\xc3\xa4 (esc) diffstat: a | 1 + 1 files changed, 1 insertions(+), 0 deletions(-) diffs (7 lines): diff -r 6a0cf76b2701 -r 7ea05ad269dc a --- a/a Thu Jan 01 00:00:03 1970 +0000 +++ b/a Thu Jan 01 00:00:00 1970 +0000 @@ -1,2 +1,3 @@ a a +a (run 'hg update' to get a working copy) long lines $ cat <<EOF >> $HGRCPATH > [notify] > maxsubject = 67 > test = False > mbox = mbox > EOF $ python -c 'file("a/a", "ab").write("no" * 500 + "\n")' $ hg --cwd a commit -A -m "long line" $ hg --traceback --cwd b pull ../a pulling from ../a searching for changes adding changesets adding manifests adding file changes added 1 changesets with 1 changes to 1 files notify: sending 2 subscribers 1 changes (run 'hg update' to get a working copy) $ python -c 'import sys,re; print re.sub("\n\t", " ", file("b/mbox").read()),' From test@test.com ... ... .. ..:..:.. .... (re) Content-Type: text/plain; charset="us-ascii" MIME-Version: 1.0 Content-Transfer-Encoding: quoted-printable X-Test: foo Date: * (glob) Subject: long line From: test@test.com X-Hg-Notification: changeset e0be44cf638b Message-Id: <hg.e0be44cf638b.*.*@*> (glob) To: baz@test.com, foo@bar changeset e0be44cf638b in b description: long line diffstat: a | 1 + 1 files changed, 1 insertions(+), 0 deletions(-) diffs (8 lines): diff -r 7ea05ad269dc -r e0be44cf638b a --- a/a Thu Jan 01 00:00:00 1970 +0000 +++ b/a Thu Jan 01 00:00:00 1970 +0000 @@ -1,3 +1,4 @@ a a a +nonononononononononononononononononononononononononononononononononononono= nononononononononononononononononononononononononononononononononononononon= ononononononononononononononononononononononononononononononononononononono= nononononononononononononononononononononononononononononononononononononon= ononononononononononononononononononononononononononononononononononononono= nononononononononononononononononononononononononononononononononononononon= ononononononononononononononononononononononononononononononononononononono= nononononononononononononononononononononononononononononononononononononon= ononononononononononononononononononononononononononononononononononononono= nononononononononononononononononononononononononononononononononononononon= ononononononononononononononononononononononononononononononononononononono= nononononononononononononononononononononononononononononononononononononon= ononononononononononononononononononononononononononononononononononononono= nonononononononononononono