view tests/test-pull-branch.t @ 17658:a02c1ffddae9 stable

largefiles: handle commit -A properly, after a --large commit (issue3542) Previous to this, 'commit -A' would add as normal files, files that were already committed as largefiles, resulting in files being listed twice by 'status -A'. It also missed when (only) a largefile was deleted, even though status reported it as '!'. This also has the side effect of properly reporting the state of the affected largefiles in the post commit hook after a remove that also affected a normal file (the largefiles used to be 'R', now are properly absent). Since scmutil.addremove() is called both by the ui command (after some trivial argument validation) and during the commit process when -A is specified, it seems like a more appropriate method to wrap than the addremove command. Currently, a repo is only enabled to use largefiles after an add that explicitly identifies some file as large, and a subsequent commit. Therefore, this patch only changes behavior after such a largefile enabling commit. Note that in the test, if the final commit had a '-v', 'removing large8' would be printed twice. Both of these originate in removelargefiles(). The first print is in verbose mode after traversing remove + forget, the second is because the '_isaddremove' attr is set and 'after' is not.
author Matt Harbison <matt_harbison@yahoo.com>
date Mon, 30 Jul 2012 20:56:41 -0400
parents f2719b387380
children 4f8054d3171b
line wrap: on
line source

  $ hg init t
  $ cd t
  $ echo 1 > foo
  $ hg ci -Am1 # 0
  adding foo
  $ hg branch branchA
  marked working directory as branch branchA
  (branches are permanent and global, did you want a bookmark?)
  $ echo a1 > foo
  $ hg ci -ma1 # 1

  $ cd ..
  $ hg init tt
  $ cd tt
  $ hg pull ../t
  pulling from ../t
  requesting all changes
  adding changesets
  adding manifests
  adding file changes
  added 2 changesets with 2 changes to 1 files
  (run 'hg update' to get a working copy)
  $ hg up branchA
  1 files updated, 0 files merged, 0 files removed, 0 files unresolved

  $ cd ../t
  $ echo a2 > foo
  $ hg ci -ma2 # 2

Create branch B:

  $ hg up 0
  1 files updated, 0 files merged, 0 files removed, 0 files unresolved
  $ hg branch branchB
  marked working directory as branch branchB
  (branches are permanent and global, did you want a bookmark?)
  $ echo b1 > foo
  $ hg ci -mb1 # 3

  $ cd ../tt

A new branch is there

  $ hg pull -u ../t
  pulling from ../t
  searching for changes
  adding changesets
  adding manifests
  adding file changes
  added 2 changesets with 2 changes to 1 files (+1 heads)
  1 files updated, 0 files merged, 0 files removed, 0 files unresolved

Develop both branches:

  $ cd ../t
  $ hg up branchA
  1 files updated, 0 files merged, 0 files removed, 0 files unresolved
  $ echo a3 > foo
  $ hg ci -ma3 # 4
  $ hg up branchB
  1 files updated, 0 files merged, 0 files removed, 0 files unresolved
  $ echo b2 > foo
  $ hg ci -mb2 # 5

  $ cd ../tt

Should succeed, no new heads:

  $ hg pull -u ../t
  pulling from ../t
  searching for changes
  adding changesets
  adding manifests
  adding file changes
  added 2 changesets with 2 changes to 1 files
  1 files updated, 0 files merged, 0 files removed, 0 files unresolved

Add a head on other branch:

  $ cd ../t
  $ hg up branchA
  1 files updated, 0 files merged, 0 files removed, 0 files unresolved
  $ echo a4 > foo
  $ hg ci -ma4 # 6
  $ hg up branchB
  1 files updated, 0 files merged, 0 files removed, 0 files unresolved
  $ echo b3.1 > foo
  $ hg ci -m b3.1 # 7
  $ hg up 5
  1 files updated, 0 files merged, 0 files removed, 0 files unresolved
  $ echo b3.2 > foo
  $ hg ci -m b3.2 # 8
  created new head

  $ cd ../tt

Should succeed because there is only one head on our branch:

  $ hg pull -u ../t
  pulling from ../t
  searching for changes
  adding changesets
  adding manifests
  adding file changes
  added 3 changesets with 3 changes to 1 files (+1 heads)
  1 files updated, 0 files merged, 0 files removed, 0 files unresolved

  $ cd ../t
  $ hg up -C branchA
  1 files updated, 0 files merged, 0 files removed, 0 files unresolved
  $ echo a5.1 > foo
  $ hg ci -ma5.1 # 9
  $ hg up 6
  1 files updated, 0 files merged, 0 files removed, 0 files unresolved
  $ echo a5.2 > foo
  $ hg ci -ma5.2 # 10
  created new head
  $ hg up 7
  1 files updated, 0 files merged, 0 files removed, 0 files unresolved
  $ echo b4.1 > foo
  $ hg ci -m b4.1 # 11
  $ hg up -C 8
  1 files updated, 0 files merged, 0 files removed, 0 files unresolved
  $ echo b4.2 > foo
  $ hg ci -m b4.2 # 12

  $ cd ../tt

  $ hg pull -u ../t
  pulling from ../t
  searching for changes
  adding changesets
  adding manifests
  adding file changes
  added 4 changesets with 4 changes to 1 files (+1 heads)
  1 files updated, 0 files merged, 0 files removed, 0 files unresolved

Make changes on new branch on tt

  $ hg up 6
  1 files updated, 0 files merged, 0 files removed, 0 files unresolved
  $ hg branch branchC
  marked working directory as branch branchC
  (branches are permanent and global, did you want a bookmark?)
  $ echo b1 > bar 
  $ hg ci -Am "commit on branchC on tt"
  adding bar

Make changes on default branch on t

  $ cd ../t
  $ hg up -C default
  1 files updated, 0 files merged, 0 files removed, 0 files unresolved
  $ echo a1 > bar 
  $ hg ci -Am "commit on default on t"
  adding bar

Pull branchC from tt

  $ hg pull ../tt
  pulling from ../tt
  searching for changes
  adding changesets
  adding manifests
  adding file changes
  added 1 changesets with 1 changes to 1 files (+1 heads)
  (run 'hg heads' to see heads)

Make changes on default and branchC on tt

  $ cd ../tt
  $ hg pull ../t
  pulling from ../t
  searching for changes
  adding changesets
  adding manifests
  adding file changes
  added 1 changesets with 1 changes to 1 files (+1 heads)
  (run 'hg heads' to see heads)
  $ hg up -C default
  2 files updated, 0 files merged, 0 files removed, 0 files unresolved
  $ echo a1 > bar1
  $ hg ci -Am "commit on default on tt"
  adding bar1
  $ hg up branchC
  2 files updated, 0 files merged, 1 files removed, 0 files unresolved
  $ echo a1 > bar2
  $ hg ci -Am "commit on branchC on tt"
  adding bar2

Make changes on default and branchC on t

  $ cd ../t
  $ hg up default
  0 files updated, 0 files merged, 0 files removed, 0 files unresolved
  $ echo a1 > bar3
  $ hg ci -Am "commit on default on t"
  adding bar3
  $ hg up branchC
  2 files updated, 0 files merged, 1 files removed, 0 files unresolved
  $ echo a1 > bar4
  $ hg ci -Am "commit on branchC on tt"
  adding bar4

Pull from tt

  $ hg pull ../tt
  pulling from ../tt
  searching for changes
  adding changesets
  adding manifests
  adding file changes
  added 2 changesets with 2 changes to 2 files (+2 heads)
  (run 'hg heads .' to see heads, 'hg merge' to merge)

  $ cd ..