view tests/test-push-warn.t @ 17658:a02c1ffddae9 stable

largefiles: handle commit -A properly, after a --large commit (issue3542)

Previous to this, 'commit -A' would add as normal files, files that were already
committed as largefiles, resulting in files being listed twice by 'status -A'.
It also missed when (only) a largefile was deleted, even though status reported
it as '!'.  This also has the side effect of properly reporting the state of the
affected largefiles in the post commit hook after a remove that also affected a
normal file (the largefiles used to be 'R', now are properly absent).

Since scmutil.addremove() is called both by the ui command (after some trivial
argument validation) and during the commit process when -A is specified, it
seems like a more appropriate method to wrap than the addremove command.

Currently, a repo is only enabled to use largefiles after an add that explicitly
identifies some file as large, and a subsequent commit.  Therefore, this patch
only changes behavior after such a largefile enabling commit.

Note that in the test, if the final commit had a '-v', 'removing large8' would
be printed twice.  Both of these originate in removelargefiles().  The first
print is in verbose mode after traversing remove + forget, the second is because
the '_isaddremove' attr is set and 'after' is not.

  $ echo "[extensions]" >> $HGRCPATH
  $ echo "graphlog=" >> $HGRCPATH

  $ hg init a
  $ cd a
  $ echo foo > t1
  $ hg add t1
  $ hg commit -m "1"

  $ cd ..
  $ hg clone a b
  updating to branch default
  1 files updated, 0 files merged, 0 files removed, 0 files unresolved

  $ cd a
  $ echo foo > t2
  $ hg add t2
  $ hg commit -m "2"

  $ cd ../b
  $ echo foo > t3
  $ hg add t3
  $ hg commit -m "3"

  $ hg push ../a
  pushing to ../a
  searching for changes
  abort: push creates new remote head 1e108cc5548c!
  (you should pull and merge or use push -f to force)
  [255]

  $ hg push --debug ../a
  pushing to ../a
  query 1; heads
  searching for changes
  taking quick initial sample
  searching: 2 queries
  query 2; still undecided: 1, sample size is: 1
  2 total queries
  listing keys for "bookmarks"
  new remote heads on branch 'default'
  new remote head 1e108cc5548c
  abort: push creates new remote head 1e108cc5548c!
  (you should pull and merge or use push -f to force)
  [255]

  $ hg pull ../a
  pulling from ../a
  searching for changes
  adding changesets
  adding manifests
  adding file changes
  added 1 changesets with 1 changes to 1 files (+1 heads)
  (run 'hg heads' to see heads, 'hg merge' to merge)

  $ hg push ../a
  pushing to ../a
  searching for changes
  abort: push creates new remote head 1e108cc5548c!
  (did you forget to merge? use push -f to force)
  [255]

  $ hg merge
  1 files updated, 0 files merged, 0 files removed, 0 files unresolved
  (branch merge, don't forget to commit)

  $ hg commit -m "4"
  $ hg push ../a
  pushing to ../a
  searching for changes
  adding changesets
  adding manifests
  adding file changes
  added 2 changesets with 1 changes to 1 files

  $ cd ..

  $ hg init c
  $ cd c
  $ for i in 0 1 2; do
  >     echo $i >> foo
  >     hg ci -Am $i
  > done
  adding foo
  $ cd ..

  $ hg clone c d
  updating to branch default
  1 files updated, 0 files merged, 0 files removed, 0 files unresolved

  $ cd d
  $ for i in 0 1; do
  >    hg co -C $i
  >    echo d-$i >> foo
  >    hg ci -m d-$i
  > done
  1 files updated, 0 files merged, 0 files removed, 0 files unresolved
  created new head
  1 files updated, 0 files merged, 0 files removed, 0 files unresolved
  created new head

  $ HGMERGE=true hg merge 3
  merging foo
  0 files updated, 1 files merged, 0 files removed, 0 files unresolved
  (branch merge, don't forget to commit)

  $ hg ci -m c-d

  $ hg push ../c
  pushing to ../c
  searching for changes
  abort: push creates new remote head 6346d66eb9f5!
  (did you forget to merge? use push -f to force)
  [255]

  $ hg push -r 2 ../c
  pushing to ../c
  searching for changes
  no changes found
  [1]

  $ hg push -r 3 ../c
  pushing to ../c
  searching for changes
  abort: push creates new remote head a5dda829a167!
  (did you forget to merge? use push -f to force)
  [255]

  $ hg push -v -r 3 -r 4 ../c
  pushing to ../c
  searching for changes
  new remote heads on branch 'default'
  new remote head a5dda829a167
  new remote head ee8fbc7a0295
  abort: push creates new remote head a5dda829a167!
  (did you forget to merge? use push -f to force)
  [255]

  $ hg push -v -f -r 3 -r 4 ../c
  pushing to ../c
  searching for changes
  2 changesets found
  adding changesets
  adding manifests
  adding file changes
  added 2 changesets with 2 changes to 1 files (+2 heads)

  $ hg push -r 5 ../c
  pushing to ../c
  searching for changes
  adding changesets
  adding manifests
  adding file changes
  added 1 changesets with 1 changes to 1 files (-1 heads)

  $ hg in ../c
  comparing with ../c
  searching for changes
  no changes found
  [1]


Issue450: push -r warns about remote head creation even if no heads
will be created

  $ hg init ../e
  $ hg push -r 0 ../e
  pushing to ../e
  searching for changes
  adding changesets
  adding manifests
  adding file changes
  added 1 changesets with 1 changes to 1 files

  $ hg push -r 1 ../e
  pushing to ../e
  searching for changes
  adding changesets
  adding manifests
  adding file changes
  added 1 changesets with 1 changes to 1 files

  $ cd ..


Issue736: named branches are not considered for detection of
unmerged heads in "hg push"

  $ hg init f
  $ cd f
  $ hg -q branch a
  $ echo 0 > foo
  $ hg -q ci -Am 0
  $ echo 1 > foo
  $ hg -q ci -m 1
  $ hg -q up 0
  $ echo 2 > foo
  $ hg -q ci -m 2
  $ hg -q up 0
  $ hg -q branch b
  $ echo 3 > foo
  $ hg -q ci -m 3
  $ cd ..

  $ hg -q clone f g
  $ cd g

Push on existing branch and new branch:

  $ hg -q up 1
  $ echo 4 > foo
  $ hg -q ci -m 4
  $ hg -q up 0
  $ echo 5 > foo
  $ hg -q branch c
  $ hg -q ci -m 5

  $ hg push ../f
  pushing to ../f
  searching for changes
  abort: push creates new remote branches: c!
  (use 'hg push --new-branch' to create new remote branches)
  [255]

  $ hg push -r 4 -r 5 ../f
  pushing to ../f
  searching for changes
  abort: push creates new remote branches: c!
  (use 'hg push --new-branch' to create new remote branches)
  [255]


Multiple new branches:

  $ hg -q branch d
  $ echo 6 > foo
  $ hg -q ci -m 6

  $ hg push ../f
  pushing to ../f
  searching for changes
  abort: push creates new remote branches: c, d!
  (use 'hg push --new-branch' to create new remote branches)
  [255]

  $ hg push -r 4 -r 6 ../f
  pushing to ../f
  searching for changes
  abort: push creates new remote branches: c, d!
  (use 'hg push --new-branch' to create new remote branches)
  [255]

  $ cd ../g


Fail on multiple head push:

  $ hg -q up 1
  $ echo 7 > foo
  $ hg -q ci -m 7

  $ hg push -r 4 -r 7 ../f
  pushing to ../f
  searching for changes
  abort: push creates new remote head 0b715ef6ff8f on branch 'a'!
  (did you forget to merge? use push -f to force)
  [255]

Push replacement head on existing branches:

  $ hg -q up 3
  $ echo 8 > foo
  $ hg -q ci -m 8

  $ hg push -r 7 -r 8 ../f
  pushing to ../f
  searching for changes
  adding changesets
  adding manifests
  adding file changes
  added 2 changesets with 2 changes to 1 files


Merge of branch a to other branch b followed by unrelated push
on branch a:

  $ hg -q up 7
  $ HGMERGE=true hg -q merge 8
  $ hg -q ci -m 9
  $ hg -q up 8
  $ echo 10 > foo
  $ hg -q ci -m 10

  $ hg push -r 9 ../f
  pushing to ../f
  searching for changes
  adding changesets
  adding manifests
  adding file changes
  added 1 changesets with 1 changes to 1 files (-1 heads)

  $ hg push -r 10 ../f
  pushing to ../f
  searching for changes
  adding changesets
  adding manifests
  adding file changes
  added 1 changesets with 1 changes to 1 files (+1 heads)


Cheating the counting algorithm:

  $ hg -q up 9
  $ HGMERGE=true hg -q merge 2
  $ hg -q ci -m 11
  $ hg -q up 1
  $ echo 12 > foo
  $ hg -q ci -m 12

  $ hg push -r 11 -r 12 ../f
  pushing to ../f
  searching for changes
  adding changesets
  adding manifests
  adding file changes
  added 2 changesets with 2 changes to 1 files


Failed push of new named branch:

  $ echo 12 > foo
  $ hg -q ci -m 12a
  [1]
  $ hg -q up 11
  $ echo 13 > foo
  $ hg -q branch e
  $ hg -q ci -m 13d

  $ hg push -r 12 -r 13 ../f
  pushing to ../f
  searching for changes
  abort: push creates new remote branches: e!
  (use 'hg push --new-branch' to create new remote branches)
  [255]


Using --new-branch to push new named branch:

  $ hg push --new-branch -r 12 -r 13 ../f
  pushing to ../f
  searching for changes
  adding changesets
  adding manifests
  adding file changes
  added 1 changesets with 1 changes to 1 files


Checking prepush logic does not allow silently pushing
multiple new heads:

  $ cd ..
  $ hg init h
  $ echo init > h/init
  $ hg -R h ci -Am init
  adding init
  $ echo a > h/a
  $ hg -R h ci -Am a
  adding a
  $ hg clone h i
  updating to branch default
  2 files updated, 0 files merged, 0 files removed, 0 files unresolved
  $ hg -R h up 0
  0 files updated, 0 files merged, 1 files removed, 0 files unresolved
  $ echo b > h/b
  $ hg -R h ci -Am b
  adding b
  created new head
  $ hg -R i up 0
  0 files updated, 0 files merged, 1 files removed, 0 files unresolved
  $ echo c > i/c
  $ hg -R i ci -Am c
  adding c
  created new head

  $ hg -R i push h
  pushing to h
  searching for changes
  abort: push creates new remote head 97bd0c84d346!
  (you should pull and merge or use push -f to force)
  [255]


Check prepush logic with merged branches:

  $ hg init j
  $ hg -R j branch a
  marked working directory as branch a
  (branches are permanent and global, did you want a bookmark?)
  $ echo init > j/foo
  $ hg -R j ci -Am init
  adding foo
  $ hg clone j k
  updating to branch a
  1 files updated, 0 files merged, 0 files removed, 0 files unresolved
  $ echo a1 > j/foo
  $ hg -R j ci -m a1
  $ hg -R k branch b
  marked working directory as branch b
  (branches are permanent and global, did you want a bookmark?)
  $ echo b > k/foo
  $ hg -R k ci -m b
  $ hg -R k up 0
  1 files updated, 0 files merged, 0 files removed, 0 files unresolved

  $ hg -R k merge b
  1 files updated, 0 files merged, 0 files removed, 0 files unresolved
  (branch merge, don't forget to commit)

  $ hg -R k ci -m merge

  $ hg -R k push -r a j
  pushing to j
  searching for changes
  abort: push creates new remote branches: b!
  (use 'hg push --new-branch' to create new remote branches)
  [255]


Prepush -r should not allow you to sneak in new heads:

  $ hg init l
  $ cd l
  $ echo a >> foo
  $ hg -q add foo
  $ hg -q branch a
  $ hg -q ci -ma
  $ hg -q up null
  $ echo a >> foo
  $ hg -q add foo
  $ hg -q branch b
  $ hg -q ci -mb
  $ cd ..
  $ hg -q clone l m -u a
  $ cd m
  $ hg -q merge b
  $ hg -q ci -mmb
  $ hg -q up 0
  $ echo a >> foo
  $ hg -q ci -ma2
  $ hg -q up 2
  $ echo a >> foo
  $ hg -q branch -f b
  $ hg -q ci -mb2
  $ hg -q merge 3
  $ hg -q ci -mma

  $ hg push ../l -b b
  pushing to ../l
  searching for changes
  abort: push creates new remote head e7e31d71180f on branch 'a'!
  (did you forget to merge? use push -f to force)
  [255]

  $ cd ..


Check prepush with new branch head on former topo non-head:

  $ hg init n
  $ cd n
  $ hg branch A
  marked working directory as branch A
  (branches are permanent and global, did you want a bookmark?)
  $ echo a >a
  $ hg ci -Ama
  adding a
  $ hg branch B
  marked working directory as branch B
  (branches are permanent and global, did you want a bookmark?)
  $ echo b >b
  $ hg ci -Amb
  adding b

b is now branch head of B, and a topological head
a is now branch head of A, but not a topological head

  $ hg clone . inner
  updating to branch B
  2 files updated, 0 files merged, 0 files removed, 0 files unresolved
  $ cd inner
  $ hg up B
  0 files updated, 0 files merged, 0 files removed, 0 files unresolved
  $ echo b1 >b1
  $ hg ci -Amb1
  adding b1

in the clone b1 is now the head of B

  $ cd ..
  $ hg up 0
  0 files updated, 0 files merged, 1 files removed, 0 files unresolved
  $ echo a2 >a2
  $ hg ci -Ama2
  adding a2

a2 is now the new branch head of A, and a new topological head
it replaces a former inner branch head, so it should at most warn about
A, not B

glog of local:

  $ hg glog --template "{rev}: {branches} {desc}\n"
  @  2: A a2
  |
  | o  1: B b
  |/
  o  0: A a
  
glog of remote:

  $ hg glog -R inner --template "{rev}: {branches} {desc}\n"
  @  2: B b1
  |
  o  1: B b
  |
  o  0: A a
  
outgoing:

  $ hg out inner --template "{rev}: {branches} {desc}\n"
  comparing with inner
  searching for changes
  2: A a2

  $ hg push inner
  pushing to inner
  searching for changes
  adding changesets
  adding manifests
  adding file changes
  added 1 changesets with 1 changes to 1 files (+1 heads)

  $ cd ..


Check prepush with new branch head on former topo head:

  $ hg init o
  $ cd o
  $ hg branch A
  marked working directory as branch A
  (branches are permanent and global, did you want a bookmark?)
  $ echo a >a
  $ hg ci -Ama
  adding a
  $ hg branch B
  marked working directory as branch B
  (branches are permanent and global, did you want a bookmark?)
  $ echo b >b
  $ hg ci -Amb
  adding b

b is now branch head of B, and a topological head

  $ hg up 0
  0 files updated, 0 files merged, 1 files removed, 0 files unresolved
  $ echo a1 >a1
  $ hg ci -Ama1
  adding a1

a1 is now branch head of A, and a topological head

  $ hg clone . inner
  updating to branch A
  2 files updated, 0 files merged, 0 files removed, 0 files unresolved
  $ cd inner
  $ hg up B
  1 files updated, 0 files merged, 1 files removed, 0 files unresolved
  $ echo b1 >b1
  $ hg ci -Amb1
  adding b1

in the clone b1 is now the head of B

  $ cd ..
  $ echo a2 >a2
  $ hg ci -Ama2
  adding a2

a2 is now the new branch head of A, and a topological head
it replaces a former topological and branch head, so this should not warn

glog of local:

  $ hg glog --template "{rev}: {branches} {desc}\n"
  @  3: A a2
  |
  o  2: A a1
  |
  | o  1: B b
  |/
  o  0: A a
  
glog of remote:

  $ hg glog -R inner --template "{rev}: {branches} {desc}\n"
  @  3: B b1
  |
  | o  2: A a1
  | |
  o |  1: B b
  |/
  o  0: A a
  
outgoing:

  $ hg out inner --template "{rev}: {branches} {desc}\n"
  comparing with inner
  searching for changes
  3: A a2

  $ hg push inner
  pushing to inner
  searching for changes
  adding changesets
  adding manifests
  adding file changes
  added 1 changesets with 1 changes to 1 files

  $ cd ..


Check prepush with new branch head and new child of former branch head
but child is on different branch:

  $ hg init p
  $ cd p
  $ hg branch A
  marked working directory as branch A
  (branches are permanent and global, did you want a bookmark?)
  $ echo a0 >a
  $ hg ci -Ama0
  adding a
  $ echo a1 >a
  $ hg ci -ma1
  $ hg up null
  0 files updated, 0 files merged, 1 files removed, 0 files unresolved
  $ hg branch B
  marked working directory as branch B
  (branches are permanent and global, did you want a bookmark?)
  $ echo b0 >b
  $ hg ci -Amb0
  adding b
  $ echo b1 >b
  $ hg ci -mb1

  $ hg clone . inner
  updating to branch B
  1 files updated, 0 files merged, 0 files removed, 0 files unresolved

  $ hg up A
  1 files updated, 0 files merged, 1 files removed, 0 files unresolved
  $ hg branch -f B
  marked working directory as branch B
  (branches are permanent and global, did you want a bookmark?)
  $ echo a3 >a
  $ hg ci -ma3
  created new head
  $ hg up 3
  1 files updated, 0 files merged, 1 files removed, 0 files unresolved
  $ hg branch -f A
  marked working directory as branch A
  (branches are permanent and global, did you want a bookmark?)
  $ echo b3 >b
  $ hg ci -mb3
  created new head

glog of local:

  $ hg glog --template "{rev}: {branches} {desc}\n"
  @  5: A b3
  |
  | o  4: B a3
  | |
  o |  3: B b1
  | |
  o |  2: B b0
   /
  o  1: A a1
  |
  o  0: A a0
  
glog of remote:

  $ hg glog -R inner --template "{rev}: {branches} {desc}\n"
  @  3: B b1
  |
  o  2: B b0
  
  o  1: A a1
  |
  o  0: A a0
  
outgoing:

  $ hg out inner --template "{rev}: {branches} {desc}\n"
  comparing with inner
  searching for changes
  4: B a3
  5: A b3

  $ hg push inner
  pushing to inner
  searching for changes
  abort: push creates new remote head 7d0f4fb6cf04 on branch 'A'!
  (did you forget to merge? use push -f to force)
  [255]

  $ hg push inner -r4 -r5
  pushing to inner
  searching for changes
  abort: push creates new remote head 7d0f4fb6cf04 on branch 'A'!
  (did you forget to merge? use push -f to force)
  [255]

  $ hg in inner
  comparing with inner
  searching for changes
  no changes found
  [1]

  $ cd ..