view tests/test-status.t @ 17658:a02c1ffddae9 stable

largefiles: handle commit -A properly, after a --large commit (issue3542)

Previous to this, 'commit -A' would add as normal files, files that were already
committed as largefiles, resulting in files being listed twice by 'status -A'.
It also missed when (only) a largefile was deleted, even though status reported
it as '!'.  This also has the side effect of properly reporting the state of the
affected largefiles in the post commit hook after a remove that also affected a
normal file (the largefiles used to be 'R', now are properly absent).

Since scmutil.addremove() is called both by the ui command (after some trivial
argument validation) and during the commit process when -A is specified, it
seems like a more appropriate method to wrap than the addremove command.

Currently, a repo is only enabled to use largefiles after an add that explicitly
identifies some file as large, and a subsequent commit.  Therefore, this patch
only changes behavior after such a largefile enabling commit.

Note that in the test, if the final commit had a '-v', 'removing large8' would
be printed twice.  Both of these originate in removelargefiles().  The first
print is in verbose mode after traversing remove + forget, the second is because
the '_isaddremove' attr is set and 'after' is not.

  $ hg init repo1
  $ cd repo1
  $ mkdir a b a/1 b/1 b/2
  $ touch in_root a/in_a b/in_b a/1/in_a_1 b/1/in_b_1 b/2/in_b_2

hg status in repo root:

  $ hg status
  ? a/1/in_a_1
  ? a/in_a
  ? b/1/in_b_1
  ? b/2/in_b_2
  ? b/in_b
  ? in_root

hg status . in repo root:

  $ hg status .
  ? a/1/in_a_1
  ? a/in_a
  ? b/1/in_b_1
  ? b/2/in_b_2
  ? b/in_b
  ? in_root

  $ hg status --cwd a
  ? a/1/in_a_1
  ? a/in_a
  ? b/1/in_b_1
  ? b/2/in_b_2
  ? b/in_b
  ? in_root
  $ hg status --cwd a .
  ? 1/in_a_1
  ? in_a
  $ hg status --cwd a ..
  ? 1/in_a_1
  ? in_a
  ? ../b/1/in_b_1
  ? ../b/2/in_b_2
  ? ../b/in_b
  ? ../in_root

  $ hg status --cwd b
  ? a/1/in_a_1
  ? a/in_a
  ? b/1/in_b_1
  ? b/2/in_b_2
  ? b/in_b
  ? in_root
  $ hg status --cwd b .
  ? 1/in_b_1
  ? 2/in_b_2
  ? in_b
  $ hg status --cwd b ..
  ? ../a/1/in_a_1
  ? ../a/in_a
  ? 1/in_b_1
  ? 2/in_b_2
  ? in_b
  ? ../in_root

  $ hg status --cwd a/1
  ? a/1/in_a_1
  ? a/in_a
  ? b/1/in_b_1
  ? b/2/in_b_2
  ? b/in_b
  ? in_root
  $ hg status --cwd a/1 .
  ? in_a_1
  $ hg status --cwd a/1 ..
  ? in_a_1
  ? ../in_a

  $ hg status --cwd b/1
  ? a/1/in_a_1
  ? a/in_a
  ? b/1/in_b_1
  ? b/2/in_b_2
  ? b/in_b
  ? in_root
  $ hg status --cwd b/1 .
  ? in_b_1
  $ hg status --cwd b/1 ..
  ? in_b_1
  ? ../2/in_b_2
  ? ../in_b

  $ hg status --cwd b/2
  ? a/1/in_a_1
  ? a/in_a
  ? b/1/in_b_1
  ? b/2/in_b_2
  ? b/in_b
  ? in_root
  $ hg status --cwd b/2 .
  ? in_b_2
  $ hg status --cwd b/2 ..
  ? ../1/in_b_1
  ? in_b_2
  ? ../in_b
  $ cd ..

  $ hg init repo2
  $ cd repo2
  $ touch modified removed deleted ignored
  $ echo "^ignored$" > .hgignore
  $ hg ci -A -m 'initial checkin'
  adding .hgignore
  adding deleted
  adding modified
  adding removed
  $ touch modified added unknown ignored
  $ hg add added
  $ hg remove removed
  $ rm deleted

hg status:

  $ hg status
  A added
  R removed
  ! deleted
  ? unknown

hg status modified added removed deleted unknown never-existed ignored:

  $ hg status modified added removed deleted unknown never-existed ignored
  never-existed: * (glob)
  A added
  R removed
  ! deleted
  ? unknown

  $ hg copy modified copied

hg status -C:

  $ hg status -C
  A added
  A copied
    modified
  R removed
  ! deleted
  ? unknown

hg status -A:

  $ hg status -A
  A added
  A copied
    modified
  R removed
  ! deleted
  ? unknown
  I ignored
  C .hgignore
  C modified


  $ echo "^ignoreddir$" > .hgignore
  $ mkdir ignoreddir
  $ touch ignoreddir/file

hg status ignoreddir/file:

  $ hg status ignoreddir/file

hg status -i ignoreddir/file:

  $ hg status -i ignoreddir/file
  I ignoreddir/file
  $ cd ..

Check 'status -q' and some combinations

  $ hg init repo3
  $ cd repo3
  $ touch modified removed deleted ignored
  $ echo "^ignored$" > .hgignore
  $ hg commit -A -m 'initial checkin'
  adding .hgignore
  adding deleted
  adding modified
  adding removed
  $ touch added unknown ignored
  $ hg add added
  $ echo "test" >> modified
  $ hg remove removed
  $ rm deleted
  $ hg copy modified copied

Run status with 2 different flags.
Check if result is the same or different.
If result is not as expected, raise error

  $ assert() {
  >     hg status $1 > ../a
  >     hg status $2 > ../b
  >     if diff ../a ../b > /dev/null; then
  >         out=0
  >     else
  >         out=1
  >     fi
  >     if [ $3 -eq 0 ]; then
  >         df="same"
  >     else
  >         df="different"
  >     fi
  >     if [ $out -ne $3 ]; then
  >         echo "Error on $1 and $2, should be $df."
  >     fi
  > }

Assert flag1 flag2 [0-same | 1-different]

  $ assert "-q" "-mard"      0
  $ assert "-A" "-marduicC"  0
  $ assert "-qA" "-mardcC"   0
  $ assert "-qAui" "-A"      0
  $ assert "-qAu" "-marducC" 0
  $ assert "-qAi" "-mardicC" 0
  $ assert "-qu" "-u"        0
  $ assert "-q" "-u"         1
  $ assert "-m" "-a"         1
  $ assert "-r" "-d"         1
  $ cd ..

  $ hg init repo4
  $ cd repo4
  $ touch modified removed deleted
  $ hg ci -q -A -m 'initial checkin'
  $ touch added unknown
  $ hg add added
  $ hg remove removed
  $ rm deleted
  $ echo x > modified
  $ hg copy modified copied
  $ hg ci -m 'test checkin' -d "1000001 0"
  $ rm *
  $ touch unrelated
  $ hg ci -q -A -m 'unrelated checkin' -d "1000002 0"

hg status --change 1:

  $ hg status --change 1
  M modified
  A added
  A copied
  R removed

hg status --change 1 unrelated:

  $ hg status --change 1 unrelated

hg status -C --change 1 added modified copied removed deleted:

  $ hg status -C --change 1 added modified copied removed deleted
  M modified
  A added
  A copied
    modified
  R removed

hg status -A --change 1 and revset:

  $ hg status -A --change '1|1'
  M modified
  A added
  A copied
    modified
  R removed
  C deleted

  $ cd ..

hg status of binary file starting with '\1\n', a separator for metadata:

  $ hg init repo5
  $ cd repo5
  >>> open("010a", "wb").write("\1\nfoo")
  $ hg ci -q -A -m 'initial checkin'
  $ hg status -A
  C 010a

  >>> open("010a", "wb").write("\1\nbar")
  $ hg status -A
  M 010a
  $ hg ci -q -m 'modify 010a'
  $ hg status -A --rev 0:1
  M 010a

  $ touch empty
  $ hg ci -q -A -m 'add another file'
  $ hg status -A --rev 1:2 010a
  C 010a

  $ cd ..

test "hg status" with "directory pattern" which matches against files
only known on target revision.

  $ hg init repo6
  $ cd repo6

  $ echo a > a.txt
  $ hg add a.txt
  $ hg commit -m '#0'
  $ mkdir -p 1/2/3/4/5
  $ echo b > 1/2/3/4/5/b.txt
  $ hg add 1/2/3/4/5/b.txt
  $ hg commit -m '#1'

  $ hg update -C 0 > /dev/null
  $ hg status -A
  C a.txt

the directory matching against specified pattern should be removed,
because directory existence prevents 'dirstate.walk()' from showing
warning message about such pattern.

  $ test ! -d 1
  $ hg status -A --rev 1 1/2/3/4/5/b.txt
  R 1/2/3/4/5/b.txt
  $ hg status -A --rev 1 1/2/3/4/5
  R 1/2/3/4/5/b.txt
  $ hg status -A --rev 1 1/2/3
  R 1/2/3/4/5/b.txt
  $ hg status -A --rev 1 1
  R 1/2/3/4/5/b.txt

  $ cd ..