Mercurial > hg
view tests/test-subrepo-recursion.t @ 17658:a02c1ffddae9 stable
largefiles: handle commit -A properly, after a --large commit (issue3542)
Previous to this, 'commit -A' would add as normal files, files that were already
committed as largefiles, resulting in files being listed twice by 'status -A'.
It also missed when (only) a largefile was deleted, even though status reported
it as '!'. This also has the side effect of properly reporting the state of the
affected largefiles in the post commit hook after a remove that also affected a
normal file (the largefiles used to be 'R', now are properly absent).
Since scmutil.addremove() is called both by the ui command (after some trivial
argument validation) and during the commit process when -A is specified, it
seems like a more appropriate method to wrap than the addremove command.
Currently, a repo is only enabled to use largefiles after an add that explicitly
identifies some file as large, and a subsequent commit. Therefore, this patch
only changes behavior after such a largefile enabling commit.
Note that in the test, if the final commit had a '-v', 'removing large8' would
be printed twice. Both of these originate in removelargefiles(). The first
print is in verbose mode after traversing remove + forget, the second is because
the '_isaddremove' attr is set and 'after' is not.
author | Matt Harbison <matt_harbison@yahoo.com> |
---|---|
date | Mon, 30 Jul 2012 20:56:41 -0400 |
parents | f2719b387380 |
children | 6047947afb6b |
line wrap: on
line source
Create test repository: $ hg init repo $ cd repo $ echo x1 > x.txt $ hg init foo $ cd foo $ echo y1 > y.txt $ hg init bar $ cd bar $ echo z1 > z.txt $ cd .. $ echo 'bar = bar' > .hgsub $ cd .. $ echo 'foo = foo' > .hgsub Add files --- .hgsub files must go first to trigger subrepos: $ hg add -S .hgsub $ hg add -S foo/.hgsub $ hg add -S foo/bar adding foo/bar/z.txt (glob) $ hg add -S adding x.txt adding foo/y.txt (glob) Test recursive status without committing anything: $ hg status -S A .hgsub A foo/.hgsub A foo/bar/z.txt A foo/y.txt A x.txt Test recursive diff without committing anything: $ hg diff --nodates -S foo diff -r 000000000000 foo/.hgsub --- /dev/null +++ b/foo/.hgsub @@ -0,0 +1,1 @@ +bar = bar diff -r 000000000000 foo/y.txt --- /dev/null +++ b/foo/y.txt @@ -0,0 +1,1 @@ +y1 diff -r 000000000000 foo/bar/z.txt --- /dev/null +++ b/foo/bar/z.txt @@ -0,0 +1,1 @@ +z1 Commits: $ hg commit -m fails abort: uncommitted changes in subrepo foo (use --subrepos for recursive commit) [255] The --subrepos flag overwrite the config setting: $ hg commit -m 0-0-0 --config ui.commitsubrepos=No --subrepos committing subrepository foo committing subrepository foo/bar (glob) $ cd foo $ echo y2 >> y.txt $ hg commit -m 0-1-0 $ cd bar $ echo z2 >> z.txt $ hg commit -m 0-1-1 $ cd .. $ hg commit -m 0-2-1 $ cd .. $ hg commit -m 1-2-1 Change working directory: $ echo y3 >> foo/y.txt $ echo z3 >> foo/bar/z.txt $ hg status -S M foo/bar/z.txt M foo/y.txt $ hg diff --nodates -S diff -r d254738c5f5e foo/y.txt --- a/foo/y.txt +++ b/foo/y.txt @@ -1,2 +1,3 @@ y1 y2 +y3 diff -r 9647f22de499 foo/bar/z.txt --- a/foo/bar/z.txt +++ b/foo/bar/z.txt @@ -1,2 +1,3 @@ z1 z2 +z3 Status call crossing repository boundaries: $ hg status -S foo/bar/z.txt M foo/bar/z.txt $ hg status -S -I 'foo/?.txt' M foo/y.txt $ hg status -S -I '**/?.txt' M foo/bar/z.txt M foo/y.txt $ hg diff --nodates -S -I '**/?.txt' diff -r d254738c5f5e foo/y.txt --- a/foo/y.txt +++ b/foo/y.txt @@ -1,2 +1,3 @@ y1 y2 +y3 diff -r 9647f22de499 foo/bar/z.txt --- a/foo/bar/z.txt +++ b/foo/bar/z.txt @@ -1,2 +1,3 @@ z1 z2 +z3 Status from within a subdirectory: $ mkdir dir $ cd dir $ echo a1 > a.txt $ hg status -S M foo/bar/z.txt M foo/y.txt ? dir/a.txt $ hg diff --nodates -S diff -r d254738c5f5e foo/y.txt --- a/foo/y.txt +++ b/foo/y.txt @@ -1,2 +1,3 @@ y1 y2 +y3 diff -r 9647f22de499 foo/bar/z.txt --- a/foo/bar/z.txt +++ b/foo/bar/z.txt @@ -1,2 +1,3 @@ z1 z2 +z3 Status with relative path: $ hg status -S .. M ../foo/bar/z.txt M ../foo/y.txt ? a.txt $ hg diff --nodates -S .. diff -r d254738c5f5e foo/y.txt --- a/foo/y.txt +++ b/foo/y.txt @@ -1,2 +1,3 @@ y1 y2 +y3 diff -r 9647f22de499 foo/bar/z.txt --- a/foo/bar/z.txt +++ b/foo/bar/z.txt @@ -1,2 +1,3 @@ z1 z2 +z3 $ cd .. Cleanup and final commit: $ rm -r dir $ hg commit --subrepos -m 2-3-2 committing subrepository foo committing subrepository foo/bar (glob) Test explicit path commands within subrepos: add/forget $ echo z1 > foo/bar/z2.txt $ hg status -S ? foo/bar/z2.txt $ hg add foo/bar/z2.txt $ hg status -S A foo/bar/z2.txt $ hg forget foo/bar/z2.txt $ hg status -S ? foo/bar/z2.txt $ hg forget foo/bar/z2.txt not removing foo/bar/z2.txt: file is already untracked (glob) [1] $ hg status -S ? foo/bar/z2.txt $ rm foo/bar/z2.txt Log with the relationships between repo and its subrepo: $ hg log --template '{rev}:{node|short} {desc}\n' 2:1326fa26d0c0 2-3-2 1:4b3c9ff4f66b 1-2-1 0:23376cbba0d8 0-0-0 $ hg -R foo log --template '{rev}:{node|short} {desc}\n' 3:65903cebad86 2-3-2 2:d254738c5f5e 0-2-1 1:8629ce7dcc39 0-1-0 0:af048e97ade2 0-0-0 $ hg -R foo/bar log --template '{rev}:{node|short} {desc}\n' 2:31ecbdafd357 2-3-2 1:9647f22de499 0-1-1 0:4904098473f9 0-0-0 Status between revisions: $ hg status -S $ hg status -S --rev 0:1 M .hgsubstate M foo/.hgsubstate M foo/bar/z.txt M foo/y.txt $ hg diff --nodates -S -I '**/?.txt' --rev 0:1 diff -r af048e97ade2 -r d254738c5f5e foo/y.txt --- a/foo/y.txt +++ b/foo/y.txt @@ -1,1 +1,2 @@ y1 +y2 diff -r 4904098473f9 -r 9647f22de499 foo/bar/z.txt --- a/foo/bar/z.txt +++ b/foo/bar/z.txt @@ -1,1 +1,2 @@ z1 +z2 Enable progress extension for archive tests: $ cp $HGRCPATH $HGRCPATH.no-progress $ cat >> $HGRCPATH <<EOF > [extensions] > progress = > [progress] > assume-tty = 1 > delay = 0 > format = topic bar number > refresh = 0 > width = 60 > EOF Test archiving to a directory tree (the doubled lines in the output only show up in the test output, not in real usage): $ hg archive --subrepos ../archive 2>&1 | "$TESTDIR/filtercr.py" archiving [ ] 0/3 archiving [ ] 0/3 archiving [=============> ] 1/3 archiving [=============> ] 1/3 archiving [===========================> ] 2/3 archiving [===========================> ] 2/3 archiving [==========================================>] 3/3 archiving [==========================================>] 3/3 archiving (foo) [ ] 0/3 archiving (foo) [ ] 0/3 archiving (foo) [===========> ] 1/3 archiving (foo) [===========> ] 1/3 archiving (foo) [=======================> ] 2/3 archiving (foo) [=======================> ] 2/3 archiving (foo) [====================================>] 3/3 archiving (foo) [====================================>] 3/3 archiving (foo/bar) [ ] 0/1 (glob) archiving (foo/bar) [ ] 0/1 (glob) archiving (foo/bar) [================================>] 1/1 (glob) archiving (foo/bar) [================================>] 1/1 (glob) \r (esc) $ find ../archive | sort ../archive ../archive/.hg_archival.txt ../archive/.hgsub ../archive/.hgsubstate ../archive/foo ../archive/foo/.hgsub ../archive/foo/.hgsubstate ../archive/foo/bar ../archive/foo/bar/z.txt ../archive/foo/y.txt ../archive/x.txt Test archiving to zip file (unzip output is unstable): $ hg archive --subrepos ../archive.zip 2>&1 | "$TESTDIR/filtercr.py" archiving [ ] 0/3 archiving [ ] 0/3 archiving [=============> ] 1/3 archiving [=============> ] 1/3 archiving [===========================> ] 2/3 archiving [===========================> ] 2/3 archiving [==========================================>] 3/3 archiving [==========================================>] 3/3 archiving (foo) [ ] 0/3 archiving (foo) [ ] 0/3 archiving (foo) [===========> ] 1/3 archiving (foo) [===========> ] 1/3 archiving (foo) [=======================> ] 2/3 archiving (foo) [=======================> ] 2/3 archiving (foo) [====================================>] 3/3 archiving (foo) [====================================>] 3/3 archiving (foo/bar) [ ] 0/1 (glob) archiving (foo/bar) [ ] 0/1 (glob) archiving (foo/bar) [================================>] 1/1 (glob) archiving (foo/bar) [================================>] 1/1 (glob) \r (esc) Test archiving a revision that references a subrepo that is not yet cloned: $ hg clone -U . ../empty $ cd ../empty $ hg archive --subrepos -r tip ../archive.tar.gz 2>&1 | "$TESTDIR/filtercr.py" archiving [ ] 0/3 archiving [ ] 0/3 archiving [=============> ] 1/3 archiving [=============> ] 1/3 archiving [===========================> ] 2/3 archiving [===========================> ] 2/3 archiving [==========================================>] 3/3 archiving [==========================================>] 3/3 archiving (foo) [ ] 0/3 archiving (foo) [ ] 0/3 archiving (foo) [===========> ] 1/3 archiving (foo) [===========> ] 1/3 archiving (foo) [=======================> ] 2/3 archiving (foo) [=======================> ] 2/3 archiving (foo) [====================================>] 3/3 archiving (foo) [====================================>] 3/3 archiving (foo/bar) [ ] 0/1 (glob) archiving (foo/bar) [ ] 0/1 (glob) archiving (foo/bar) [================================>] 1/1 (glob) archiving (foo/bar) [================================>] 1/1 (glob) cloning subrepo foo from $TESTTMP/repo/foo cloning subrepo foo/bar from $TESTTMP/repo/foo/bar (glob) The newly cloned subrepos contain no working copy: $ hg -R foo summary parent: -1:000000000000 (no revision checked out) branch: default commit: (clean) update: 4 new changesets (update) Disable progress extension and cleanup: $ mv $HGRCPATH.no-progress $HGRCPATH Test archiving when there is a directory in the way for a subrepo created by archive: $ hg clone -U . ../almost-empty $ cd ../almost-empty $ mkdir foo $ echo f > foo/f $ hg archive --subrepos -r tip archive cloning subrepo foo from $TESTTMP/empty/foo abort: destination '$TESTTMP/almost-empty/foo' is not empty (glob) [255] Clone and test outgoing: $ cd .. $ hg clone repo repo2 updating to branch default cloning subrepo foo from $TESTTMP/repo/foo cloning subrepo foo/bar from $TESTTMP/repo/foo/bar (glob) 3 files updated, 0 files merged, 0 files removed, 0 files unresolved $ cd repo2 $ hg outgoing -S comparing with $TESTTMP/repo (glob) searching for changes no changes found comparing with $TESTTMP/repo/foo searching for changes no changes found comparing with $TESTTMP/repo/foo/bar searching for changes no changes found [1] Make nested change: $ echo y4 >> foo/y.txt $ hg diff --nodates -S diff -r 65903cebad86 foo/y.txt --- a/foo/y.txt +++ b/foo/y.txt @@ -1,3 +1,4 @@ y1 y2 y3 +y4 $ hg commit --subrepos -m 3-4-2 committing subrepository foo $ hg outgoing -S comparing with $TESTTMP/repo (glob) searching for changes changeset: 3:2655b8ecc4ee tag: tip user: test date: Thu Jan 01 00:00:00 1970 +0000 summary: 3-4-2 comparing with $TESTTMP/repo/foo searching for changes changeset: 4:e96193d6cb36 tag: tip user: test date: Thu Jan 01 00:00:00 1970 +0000 summary: 3-4-2 comparing with $TESTTMP/repo/foo/bar searching for changes no changes found Switch to original repo and setup default path: $ cd ../repo $ echo '[paths]' >> .hg/hgrc $ echo 'default = ../repo2' >> .hg/hgrc Test incoming: $ hg incoming -S comparing with $TESTTMP/repo2 (glob) searching for changes changeset: 3:2655b8ecc4ee tag: tip user: test date: Thu Jan 01 00:00:00 1970 +0000 summary: 3-4-2 comparing with $TESTTMP/repo2/foo searching for changes changeset: 4:e96193d6cb36 tag: tip user: test date: Thu Jan 01 00:00:00 1970 +0000 summary: 3-4-2 comparing with $TESTTMP/repo2/foo/bar searching for changes no changes found $ hg incoming -S --bundle incoming.hg abort: cannot combine --bundle and --subrepos [255] Test missing subrepo: $ rm -r foo $ hg status -S warning: error "unknown revision '65903cebad86f1a84bd4f1134f62fa7dcb7a1c98'" in subrepository "foo" Issue2619: IndexError: list index out of range on hg add with subrepos The subrepo must sorts after the explicit filename. $ cd .. $ hg init test $ cd test $ hg init x $ echo "x = x" >> .hgsub $ hg add .hgsub $ touch a x/a $ hg add a x/a $ cd ..