view tests/test-wireproto.t @ 17658:a02c1ffddae9 stable

largefiles: handle commit -A properly, after a --large commit (issue3542)

Previous to this, 'commit -A' would add as normal files, files that were already
committed as largefiles, resulting in files being listed twice by 'status -A'.
It also missed when (only) a largefile was deleted, even though status reported
it as '!'.  This also has the side effect of properly reporting the state of the
affected largefiles in the post commit hook after a remove that also affected a
normal file (the largefiles used to be 'R', now are properly absent).

Since scmutil.addremove() is called both by the ui command (after some trivial
argument validation) and during the commit process when -A is specified, it
seems like a more appropriate method to wrap than the addremove command.

Currently, a repo is only enabled to use largefiles after an add that explicitly
identifies some file as large, and a subsequent commit.  Therefore, this patch
only changes behavior after such a largefile enabling commit.

Note that in the test, if the final commit had a '-v', 'removing large8' would
be printed twice.  Both of these originate in removelargefiles().  The first
print is in verbose mode after traversing remove + forget, the second is because
the '_isaddremove' attr is set and 'after' is not.

  $ "$TESTDIR/hghave" serve || exit 80

Test wire protocol argument passing

Setup repo:

  $ hg init repo

Local:

  $ hg debugwireargs repo eins zwei --three drei --four vier
  eins zwei drei vier None
  $ hg debugwireargs repo eins zwei --four vier
  eins zwei None vier None
  $ hg debugwireargs repo eins zwei
  eins zwei None None None
  $ hg debugwireargs repo eins zwei --five fuenf
  eins zwei None None fuenf

HTTP:

  $ hg serve -R repo -p $HGPORT -d --pid-file=hg1.pid -E error.log -A access.log
  $ cat hg1.pid >> $DAEMON_PIDS

  $ hg debugwireargs http://localhost:$HGPORT/ un deux trois quatre
  un deux trois quatre None
  $ hg debugwireargs http://localhost:$HGPORT/ \ un deux trois\  qu\ \ atre
   un deux trois  qu  atre None
  $ hg debugwireargs http://localhost:$HGPORT/ eins zwei --four vier
  eins zwei None vier None
  $ hg debugwireargs http://localhost:$HGPORT/ eins zwei
  eins zwei None None None
  $ hg debugwireargs http://localhost:$HGPORT/ eins zwei --five fuenf
  eins zwei None None None
  $ hg debugwireargs http://localhost:$HGPORT/ un deux trois onethousandcharactersxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
  un deux trois onethousandcharactersxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx None
  $ cat error.log
  $ cat access.log
  * - - [*] "GET /?cmd=capabilities HTTP/1.1" 200 - (glob)
  * - - [*] "GET /?cmd=debugwireargs HTTP/1.1" 200 - x-hgarg-1:four=quatre&one=un&three=trois&two=deux (glob)
  * - - [*] "GET /?cmd=debugwireargs HTTP/1.1" 200 - x-hgarg-1:four=quatre&one=un&three=trois&two=deux (glob)
  * - - [*] "GET /?cmd=capabilities HTTP/1.1" 200 - (glob)
  * - - [*] "GET /?cmd=debugwireargs HTTP/1.1" 200 - x-hgarg-1:four=qu++atre&one=+un&three=trois+&two=deux (glob)
  * - - [*] "GET /?cmd=debugwireargs HTTP/1.1" 200 - x-hgarg-1:four=qu++atre&one=+un&three=trois+&two=deux (glob)
  * - - [*] "GET /?cmd=capabilities HTTP/1.1" 200 - (glob)
  * - - [*] "GET /?cmd=debugwireargs HTTP/1.1" 200 - x-hgarg-1:four=vier&one=eins&two=zwei (glob)
  * - - [*] "GET /?cmd=debugwireargs HTTP/1.1" 200 - x-hgarg-1:four=vier&one=eins&two=zwei (glob)
  * - - [*] "GET /?cmd=capabilities HTTP/1.1" 200 - (glob)
  * - - [*] "GET /?cmd=debugwireargs HTTP/1.1" 200 - x-hgarg-1:one=eins&two=zwei (glob)
  * - - [*] "GET /?cmd=debugwireargs HTTP/1.1" 200 - x-hgarg-1:one=eins&two=zwei (glob)
  * - - [*] "GET /?cmd=capabilities HTTP/1.1" 200 - (glob)
  * - - [*] "GET /?cmd=debugwireargs HTTP/1.1" 200 - x-hgarg-1:one=eins&two=zwei (glob)
  * - - [*] "GET /?cmd=debugwireargs HTTP/1.1" 200 - x-hgarg-1:one=eins&two=zwei (glob)
  * - - [*] "GET /?cmd=capabilities HTTP/1.1" 200 - (glob)
  * - - [*] "GET /?cmd=debugwireargs HTTP/1.1" 200 - x-hgarg-1:four=onethousandcharactersxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx&one x-hgarg-2:=un&three=trois&two=deux (glob)
  * - - [*] "GET /?cmd=debugwireargs HTTP/1.1" 200 - x-hgarg-1:four=onethousandcharactersxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx&one x-hgarg-2:=un&three=trois&two=deux (glob)

HTTP without the httpheader capability:

  $ HGRCPATH="`pwd`/repo/.hgrc"
  $ export HGRCPATH
  $ CAP=httpheader
  $ . "$TESTDIR/notcapable"

  $ hg serve -R repo -p $HGPORT2 -d --pid-file=hg2.pid -E error2.log -A access2.log
  $ cat hg2.pid >> $DAEMON_PIDS

  $ hg debugwireargs http://localhost:$HGPORT2/ un deux trois quatre
  un deux trois quatre None
  $ hg debugwireargs http://localhost:$HGPORT2/ eins zwei --four vier
  eins zwei None vier None
  $ hg debugwireargs http://localhost:$HGPORT2/ eins zwei
  eins zwei None None None
  $ hg debugwireargs http://localhost:$HGPORT2/ eins zwei --five fuenf
  eins zwei None None None
  $ cat error2.log
  $ cat access2.log
  * - - [*] "GET /?cmd=capabilities HTTP/1.1" 200 - (glob)
  * - - [*] "GET /?cmd=debugwireargs&four=quatre&one=un&three=trois&two=deux HTTP/1.1" 200 - (glob)
  * - - [*] "GET /?cmd=debugwireargs&four=quatre&one=un&three=trois&two=deux HTTP/1.1" 200 - (glob)
  * - - [*] "GET /?cmd=capabilities HTTP/1.1" 200 - (glob)
  * - - [*] "GET /?cmd=debugwireargs&four=vier&one=eins&two=zwei HTTP/1.1" 200 - (glob)
  * - - [*] "GET /?cmd=debugwireargs&four=vier&one=eins&two=zwei HTTP/1.1" 200 - (glob)
  * - - [*] "GET /?cmd=capabilities HTTP/1.1" 200 - (glob)
  * - - [*] "GET /?cmd=debugwireargs&one=eins&two=zwei HTTP/1.1" 200 - (glob)
  * - - [*] "GET /?cmd=debugwireargs&one=eins&two=zwei HTTP/1.1" 200 - (glob)
  * - - [*] "GET /?cmd=capabilities HTTP/1.1" 200 - (glob)
  * - - [*] "GET /?cmd=debugwireargs&one=eins&two=zwei HTTP/1.1" 200 - (glob)
  * - - [*] "GET /?cmd=debugwireargs&one=eins&two=zwei HTTP/1.1" 200 - (glob)

SSH (try to exercise the ssh functionality with a dummy script):

  $ cat <<EOF > dummyssh
  > import sys
  > import os
  > os.chdir(os.path.dirname(sys.argv[0]))
  > if sys.argv[1] != "user@dummy":
  >     sys.exit(-1)
  > if not os.path.exists("dummyssh"):
  >     sys.exit(-1)
  > os.environ["SSH_CLIENT"] = "127.0.0.1 1 2"
  > r = os.system(sys.argv[2])
  > sys.exit(bool(r))
  > EOF

  $ hg debugwireargs --ssh "python ./dummyssh" ssh://user@dummy/repo uno due tre quattro
  uno due tre quattro None
  $ hg debugwireargs --ssh "python ./dummyssh" ssh://user@dummy/repo eins zwei --four vier
  eins zwei None vier None
  $ hg debugwireargs --ssh "python ./dummyssh" ssh://user@dummy/repo eins zwei
  eins zwei None None None
  $ hg debugwireargs --ssh "python ./dummyssh" ssh://user@dummy/repo eins zwei --five fuenf
  eins zwei None None None