view doc/check-seclevel.py @ 27738:a0e783d26e81

exchange: make clone bundles non-experimental and enabled by default

The clone bundles feature was introduced in Mercurial 3.6 behind an
experimental and disabled by default flag. The feature has been enabled
on hg.mozilla.org for a few months and has served many terabytes of
clones. Users have been encouraged to use the feature and reception
has been very positive (mainly due to faster clones as a result of
connecting to a CDN). I have heard no feedback about changing the
feature other than inquiries about when it will be enabled by default.
So, I think the feature is ready to be enabled by default.

This patch renames experimental.clonebundles to ui.clonebundles,
documents the option, and enables it by default. References to the
experimental state of clone bundles have been removed. The remaining
config option docs in clonebundles.py have been removed because they
are redudant with `hg help config`.

There are some oddities with behavior of clone bundles. Because clones
with clone bundles are effectively 2 `hg pull` operations, there may be
2 transactions. This could result in hooks running twice. If the
subsequent pull is aborted, it could result in partial rollback and an
incomplete clone. This behavior is a bit wonky and should probably
be documented. If this patch is accepted, I'll send a follow-up to
document it. I don't think this behavior should prevent the feature
being enabled by default. Reworking the clone mechanism to support
interrupted or multi-part clones feels like a major new feature and
something that when implemented can change the hook and rollback
semantics of clone bundles. Besides, partial clone is better than
full rollback and hooks running on initial clone are likely rare, so I
think the impact is minimal.

#!/usr/bin/env python
#
# checkseclevel - checking section title levels in each online help document

import sys, os
import optparse

# import from the live mercurial repo
os.environ['HGMODULEPOLICY'] = 'py'
sys.path.insert(0, "..")
from mercurial import demandimport; demandimport.enable()
from mercurial.commands import table
from mercurial.help import helptable
from mercurial import extensions
from mercurial import minirst
from mercurial import ui as uimod

level2mark = ['"', '=', '-', '.', '#']
reservedmarks = ['"']

mark2level = {}
for m, l in zip(level2mark, xrange(len(level2mark))):
    if m not in reservedmarks:
        mark2level[m] = l

initlevel_topic = 0
initlevel_cmd = 1
initlevel_ext = 1
initlevel_ext_cmd = 3

def showavailables(ui, initlevel):
    ui.warn(('    available marks and order of them in this help: %s\n') %
            (', '.join(['%r' % (m * 4) for m in level2mark[initlevel + 1:]])))

def checkseclevel(ui, doc, name, initlevel):
    ui.note(('checking "%s"\n') % name)
    blocks, pruned = minirst.parse(doc, 0, ['verbose'])
    errorcnt = 0
    curlevel = initlevel
    for block in blocks:
        if block['type'] != 'section':
            continue
        mark = block['underline']
        title = block['lines'][0]
        if (mark not in mark2level) or (mark2level[mark] <= initlevel):
            ui.warn(('invalid section mark %r for "%s" of %s\n') %
                    (mark * 4, title, name))
            showavailables(ui, initlevel)
            errorcnt += 1
            continue
        nextlevel = mark2level[mark]
        if curlevel < nextlevel and curlevel + 1 != nextlevel:
            ui.warn(('gap of section level at "%s" of %s\n') %
                    (title, name))
            showavailables(ui, initlevel)
            errorcnt += 1
            continue
        ui.note(('appropriate section level for "%s %s"\n') %
                (mark * (nextlevel * 2), title))
        curlevel = nextlevel

    return errorcnt

def checkcmdtable(ui, cmdtable, namefmt, initlevel):
    errorcnt = 0
    for k, entry in cmdtable.items():
        name = k.split("|")[0].lstrip("^")
        if not entry[0].__doc__:
            ui.note(('skip checking %s: no help document\n') %
                    (namefmt % name))
            continue
        errorcnt += checkseclevel(ui, entry[0].__doc__,
                                  namefmt % name,
                                  initlevel)
    return errorcnt

def checkhghelps(ui):
    errorcnt = 0
    for names, sec, doc in helptable:
        if callable(doc):
            doc = doc(ui)
        errorcnt += checkseclevel(ui, doc,
                                  '%s help topic' % names[0],
                                  initlevel_topic)

    errorcnt += checkcmdtable(ui, table, '%s command', initlevel_cmd)

    for name in sorted(extensions.enabled().keys() +
                       extensions.disabled().keys()):
        mod = extensions.load(ui, name, None)
        if not mod.__doc__:
            ui.note(('skip checking %s extension: no help document\n') % name)
            continue
        errorcnt += checkseclevel(ui, mod.__doc__,
                                  '%s extension' % name,
                                  initlevel_ext)

        cmdtable = getattr(mod, 'cmdtable', None)
        if cmdtable:
            errorcnt += checkcmdtable(ui, cmdtable,
                                      '%s command of ' + name + ' extension',
                                      initlevel_ext_cmd)
    return errorcnt

def checkfile(ui, filename, initlevel):
    if filename == '-':
        filename = 'stdin'
        doc = sys.stdin.read()
    else:
        fp = open(filename)
        try:
            doc = fp.read()
        finally:
            fp.close()

    ui.note(('checking input from %s with initlevel %d\n') %
            (filename, initlevel))
    return checkseclevel(ui, doc, 'input from %s' % filename, initlevel)

def main():
    optparser = optparse.OptionParser("""%prog [options]

This checks all help documents of Mercurial (topics, commands,
extensions and commands of them), if no file is specified by --file
option.
""")
    optparser.add_option("-v", "--verbose",
                         help="enable additional output",
                         action="store_true")
    optparser.add_option("-d", "--debug",
                         help="debug mode",
                         action="store_true")
    optparser.add_option("-f", "--file",
                         help="filename to read in (or '-' for stdin)",
                         action="store", default="")

    optparser.add_option("-t", "--topic",
                         help="parse file as help topic",
                         action="store_const", dest="initlevel", const=0)
    optparser.add_option("-c", "--command",
                         help="parse file as help of core command",
                         action="store_const", dest="initlevel", const=1)
    optparser.add_option("-e", "--extension",
                         help="parse file as help of extension",
                         action="store_const", dest="initlevel", const=1)
    optparser.add_option("-C", "--extension-command",
                         help="parse file as help of extension command",
                         action="store_const", dest="initlevel", const=3)

    optparser.add_option("-l", "--initlevel",
                         help="set initial section level manually",
                         action="store", type="int", default=0)

    (options, args) = optparser.parse_args()

    ui = uimod.ui()
    ui.setconfig('ui', 'verbose', options.verbose, '--verbose')
    ui.setconfig('ui', 'debug', options.debug, '--debug')

    if options.file:
        if checkfile(ui, options.file, options.initlevel):
            sys.exit(1)
    else:
        if checkhghelps(ui):
            sys.exit(1)

if __name__ == "__main__":
    main()