Mercurial > hg
view tests/test-http.t @ 27738:a0e783d26e81
exchange: make clone bundles non-experimental and enabled by default
The clone bundles feature was introduced in Mercurial 3.6 behind an
experimental and disabled by default flag. The feature has been enabled
on hg.mozilla.org for a few months and has served many terabytes of
clones. Users have been encouraged to use the feature and reception
has been very positive (mainly due to faster clones as a result of
connecting to a CDN). I have heard no feedback about changing the
feature other than inquiries about when it will be enabled by default.
So, I think the feature is ready to be enabled by default.
This patch renames experimental.clonebundles to ui.clonebundles,
documents the option, and enables it by default. References to the
experimental state of clone bundles have been removed. The remaining
config option docs in clonebundles.py have been removed because they
are redudant with `hg help config`.
There are some oddities with behavior of clone bundles. Because clones
with clone bundles are effectively 2 `hg pull` operations, there may be
2 transactions. This could result in hooks running twice. If the
subsequent pull is aborted, it could result in partial rollback and an
incomplete clone. This behavior is a bit wonky and should probably
be documented. If this patch is accepted, I'll send a follow-up to
document it. I don't think this behavior should prevent the feature
being enabled by default. Reworking the clone mechanism to support
interrupted or multi-part clones feels like a major new feature and
something that when implemented can change the hook and rollback
semantics of clone bundles. Besides, partial clone is better than
full rollback and hooks running on initial clone are likely rare, so I
think the impact is minimal.
author | Gregory Szorc <gregory.szorc@gmail.com> |
---|---|
date | Fri, 08 Jan 2016 10:58:04 -0800 |
parents | 77d25b913f80 |
children | d6d3cf5fda6f |
line wrap: on
line source
#require serve $ hg init test $ cd test $ echo foo>foo $ mkdir foo.d foo.d/bAr.hg.d foo.d/baR.d.hg $ echo foo>foo.d/foo $ echo bar>foo.d/bAr.hg.d/BaR $ echo bar>foo.d/baR.d.hg/bAR $ hg commit -A -m 1 adding foo adding foo.d/bAr.hg.d/BaR adding foo.d/baR.d.hg/bAR adding foo.d/foo $ hg serve -p $HGPORT -d --pid-file=../hg1.pid -E ../error.log $ hg --config server.uncompressed=False serve -p $HGPORT1 -d --pid-file=../hg2.pid Test server address cannot be reused #if windows $ hg serve -p $HGPORT1 2>&1 abort: cannot start server at ':$HGPORT1': * (glob) [255] #else $ hg serve -p $HGPORT1 2>&1 abort: cannot start server at ':$HGPORT1': Address already in use [255] #endif $ cd .. $ cat hg1.pid hg2.pid >> $DAEMON_PIDS clone via stream $ hg clone --uncompressed http://localhost:$HGPORT/ copy 2>&1 streaming all changes 6 files to transfer, 606 bytes of data transferred * bytes in * seconds (*/sec) (glob) searching for changes no changes found updating to branch default 4 files updated, 0 files merged, 0 files removed, 0 files unresolved $ hg verify -R copy checking changesets checking manifests crosschecking files in changesets and manifests checking files 4 files, 1 changesets, 4 total revisions try to clone via stream, should use pull instead $ hg clone --uncompressed http://localhost:$HGPORT1/ copy2 requesting all changes adding changesets adding manifests adding file changes added 1 changesets with 4 changes to 4 files updating to branch default 4 files updated, 0 files merged, 0 files removed, 0 files unresolved clone via pull $ hg clone http://localhost:$HGPORT1/ copy-pull requesting all changes adding changesets adding manifests adding file changes added 1 changesets with 4 changes to 4 files updating to branch default 4 files updated, 0 files merged, 0 files removed, 0 files unresolved $ hg verify -R copy-pull checking changesets checking manifests crosschecking files in changesets and manifests checking files 4 files, 1 changesets, 4 total revisions $ cd test $ echo bar > bar $ hg commit -A -d '1 0' -m 2 adding bar $ cd .. clone over http with --update $ hg clone http://localhost:$HGPORT1/ updated --update 0 requesting all changes adding changesets adding manifests adding file changes added 2 changesets with 5 changes to 5 files updating to branch default 4 files updated, 0 files merged, 0 files removed, 0 files unresolved $ hg log -r . -R updated changeset: 0:8b6053c928fe user: test date: Thu Jan 01 00:00:00 1970 +0000 summary: 1 $ rm -rf updated incoming via HTTP $ hg clone http://localhost:$HGPORT1/ --rev 0 partial adding changesets adding manifests adding file changes added 1 changesets with 4 changes to 4 files updating to branch default 4 files updated, 0 files merged, 0 files removed, 0 files unresolved $ cd partial $ touch LOCAL $ hg ci -qAm LOCAL $ hg incoming http://localhost:$HGPORT1/ --template '{desc}\n' comparing with http://localhost:$HGPORT1/ searching for changes 2 $ cd .. pull $ cd copy-pull $ echo '[hooks]' >> .hg/hgrc $ echo "changegroup = printenv.py changegroup" >> .hg/hgrc $ hg pull pulling from http://localhost:$HGPORT1/ searching for changes adding changesets adding manifests adding file changes added 1 changesets with 1 changes to 1 files changegroup hook: HG_NODE=5fed3813f7f5e1824344fdc9cf8f63bb662c292d HG_SOURCE=pull HG_TXNID=TXN:* HG_URL=http://localhost:$HGPORT1/ (glob) (run 'hg update' to get a working copy) $ cd .. clone from invalid URL $ hg clone http://localhost:$HGPORT/bad abort: HTTP Error 404: Not Found [255] test http authentication + use the same server to test server side streaming preference $ cd test $ cat << EOT > userpass.py > import base64 > from mercurial.hgweb import common > def perform_authentication(hgweb, req, op): > auth = req.env.get('HTTP_AUTHORIZATION') > if not auth: > raise common.ErrorResponse(common.HTTP_UNAUTHORIZED, 'who', > [('WWW-Authenticate', 'Basic Realm="mercurial"')]) > if base64.b64decode(auth.split()[1]).split(':', 1) != ['user', 'pass']: > raise common.ErrorResponse(common.HTTP_FORBIDDEN, 'no') > def extsetup(): > common.permhooks.insert(0, perform_authentication) > EOT $ hg --config extensions.x=userpass.py serve -p $HGPORT2 -d --pid-file=pid \ > --config server.preferuncompressed=True \ > --config web.push_ssl=False --config web.allow_push=* -A ../access.log $ cat pid >> $DAEMON_PIDS $ cat << EOF > get_pass.py > import getpass > def newgetpass(arg): > return "pass" > getpass.getpass = newgetpass > EOF $ hg id http://localhost:$HGPORT2/ abort: http authorization required for http://localhost:$HGPORT2/ [255] $ hg id http://localhost:$HGPORT2/ abort: http authorization required for http://localhost:$HGPORT2/ [255] $ hg id --config ui.interactive=true --config extensions.getpass=get_pass.py http://user@localhost:$HGPORT2/ http authorization required for http://localhost:$HGPORT2/ realm: mercurial user: user password: 5fed3813f7f5 $ hg id http://user:pass@localhost:$HGPORT2/ 5fed3813f7f5 $ echo '[auth]' >> .hg/hgrc $ echo 'l.schemes=http' >> .hg/hgrc $ echo 'l.prefix=lo' >> .hg/hgrc $ echo 'l.username=user' >> .hg/hgrc $ echo 'l.password=pass' >> .hg/hgrc $ hg id http://localhost:$HGPORT2/ 5fed3813f7f5 $ hg id http://localhost:$HGPORT2/ 5fed3813f7f5 $ hg id http://user@localhost:$HGPORT2/ 5fed3813f7f5 $ hg clone http://user:pass@localhost:$HGPORT2/ dest 2>&1 streaming all changes 7 files to transfer, 916 bytes of data transferred * bytes in * seconds (*/sec) (glob) searching for changes no changes found updating to branch default 5 files updated, 0 files merged, 0 files removed, 0 files unresolved --pull should override server's preferuncompressed $ hg clone --pull http://user:pass@localhost:$HGPORT2/ dest-pull 2>&1 requesting all changes adding changesets adding manifests adding file changes added 2 changesets with 5 changes to 5 files updating to branch default 5 files updated, 0 files merged, 0 files removed, 0 files unresolved $ hg id http://user2@localhost:$HGPORT2/ abort: http authorization required for http://localhost:$HGPORT2/ [255] $ hg id http://user:pass2@localhost:$HGPORT2/ abort: HTTP Error 403: no [255] $ hg -R dest tag -r tip top $ hg -R dest push http://user:pass@localhost:$HGPORT2/ pushing to http://user:***@localhost:$HGPORT2/ searching for changes remote: adding changesets remote: adding manifests remote: adding file changes remote: added 1 changesets with 1 changes to 1 files $ hg rollback -q $ cut -c38- ../access.log "GET /?cmd=capabilities HTTP/1.1" 200 - "GET /?cmd=lookup HTTP/1.1" 200 - x-hgarg-1:key=tip "GET /?cmd=listkeys HTTP/1.1" 401 - x-hgarg-1:namespace=namespaces "GET /?cmd=capabilities HTTP/1.1" 200 - "GET /?cmd=lookup HTTP/1.1" 200 - x-hgarg-1:key=tip "GET /?cmd=listkeys HTTP/1.1" 401 - x-hgarg-1:namespace=namespaces "GET /?cmd=capabilities HTTP/1.1" 200 - "GET /?cmd=lookup HTTP/1.1" 200 - x-hgarg-1:key=tip "GET /?cmd=listkeys HTTP/1.1" 401 - x-hgarg-1:namespace=namespaces "GET /?cmd=listkeys HTTP/1.1" 200 - x-hgarg-1:namespace=namespaces "GET /?cmd=listkeys HTTP/1.1" 200 - x-hgarg-1:namespace=bookmarks "GET /?cmd=capabilities HTTP/1.1" 200 - "GET /?cmd=lookup HTTP/1.1" 200 - x-hgarg-1:key=tip "GET /?cmd=listkeys HTTP/1.1" 401 - x-hgarg-1:namespace=namespaces "GET /?cmd=listkeys HTTP/1.1" 200 - x-hgarg-1:namespace=namespaces "GET /?cmd=listkeys HTTP/1.1" 200 - x-hgarg-1:namespace=bookmarks "GET /?cmd=capabilities HTTP/1.1" 200 - "GET /?cmd=lookup HTTP/1.1" 200 - x-hgarg-1:key=tip "GET /?cmd=listkeys HTTP/1.1" 401 - x-hgarg-1:namespace=namespaces "GET /?cmd=listkeys HTTP/1.1" 200 - x-hgarg-1:namespace=namespaces "GET /?cmd=listkeys HTTP/1.1" 200 - x-hgarg-1:namespace=bookmarks "GET /?cmd=capabilities HTTP/1.1" 200 - "GET /?cmd=lookup HTTP/1.1" 200 - x-hgarg-1:key=tip "GET /?cmd=listkeys HTTP/1.1" 401 - x-hgarg-1:namespace=namespaces "GET /?cmd=listkeys HTTP/1.1" 200 - x-hgarg-1:namespace=namespaces "GET /?cmd=listkeys HTTP/1.1" 200 - x-hgarg-1:namespace=bookmarks "GET /?cmd=capabilities HTTP/1.1" 200 - "GET /?cmd=lookup HTTP/1.1" 200 - x-hgarg-1:key=tip "GET /?cmd=listkeys HTTP/1.1" 401 - x-hgarg-1:namespace=namespaces "GET /?cmd=listkeys HTTP/1.1" 200 - x-hgarg-1:namespace=namespaces "GET /?cmd=listkeys HTTP/1.1" 200 - x-hgarg-1:namespace=bookmarks "GET /?cmd=capabilities HTTP/1.1" 200 - "GET /?cmd=branchmap HTTP/1.1" 200 - "GET /?cmd=stream_out HTTP/1.1" 401 - "GET /?cmd=stream_out HTTP/1.1" 200 - "GET /?cmd=batch HTTP/1.1" 200 - x-hgarg-1:cmds=heads+%3Bknown+nodes%3D5fed3813f7f5e1824344fdc9cf8f63bb662c292d "GET /?cmd=getbundle HTTP/1.1" 200 - x-hgarg-1:bundlecaps=HG20%2Cbundle2%3DHG20%250Achangegroup%253D01%252C02%252C03%250Adigests%253Dmd5%252Csha1%252Csha512%250Aerror%253Dabort%252Cunsupportedcontent%252Cpushraced%252Cpushkey%250Ahgtagsfnodes%250Alistkeys%250Apushkey%250Aremote-changegroup%253Dhttp%252Chttps&cg=0&common=5fed3813f7f5e1824344fdc9cf8f63bb662c292d&heads=5fed3813f7f5e1824344fdc9cf8f63bb662c292d&listkeys=phase%2Cbookmarks "GET /?cmd=listkeys HTTP/1.1" 200 - x-hgarg-1:namespace=phases "GET /?cmd=capabilities HTTP/1.1" 200 - "GET /?cmd=batch HTTP/1.1" 200 - x-hgarg-1:cmds=heads+%3Bknown+nodes%3D "GET /?cmd=getbundle HTTP/1.1" 401 - x-hgarg-1:bundlecaps=HG20%2Cbundle2%3DHG20%250Achangegroup%253D01%252C02%252C03%250Adigests%253Dmd5%252Csha1%252Csha512%250Aerror%253Dabort%252Cunsupportedcontent%252Cpushraced%252Cpushkey%250Ahgtagsfnodes%250Alistkeys%250Apushkey%250Aremote-changegroup%253Dhttp%252Chttps&cg=1&common=0000000000000000000000000000000000000000&heads=5fed3813f7f5e1824344fdc9cf8f63bb662c292d&listkeys=phase%2Cbookmarks "GET /?cmd=getbundle HTTP/1.1" 200 - x-hgarg-1:bundlecaps=HG20%2Cbundle2%3DHG20%250Achangegroup%253D01%252C02%252C03%250Adigests%253Dmd5%252Csha1%252Csha512%250Aerror%253Dabort%252Cunsupportedcontent%252Cpushraced%252Cpushkey%250Ahgtagsfnodes%250Alistkeys%250Apushkey%250Aremote-changegroup%253Dhttp%252Chttps&cg=1&common=0000000000000000000000000000000000000000&heads=5fed3813f7f5e1824344fdc9cf8f63bb662c292d&listkeys=phase%2Cbookmarks "GET /?cmd=listkeys HTTP/1.1" 200 - x-hgarg-1:namespace=phases "GET /?cmd=capabilities HTTP/1.1" 200 - "GET /?cmd=lookup HTTP/1.1" 200 - x-hgarg-1:key=tip "GET /?cmd=listkeys HTTP/1.1" 401 - x-hgarg-1:namespace=namespaces "GET /?cmd=capabilities HTTP/1.1" 200 - "GET /?cmd=lookup HTTP/1.1" 200 - x-hgarg-1:key=tip "GET /?cmd=listkeys HTTP/1.1" 401 - x-hgarg-1:namespace=namespaces "GET /?cmd=listkeys HTTP/1.1" 403 - x-hgarg-1:namespace=namespaces "GET /?cmd=capabilities HTTP/1.1" 200 - "GET /?cmd=batch HTTP/1.1" 200 - x-hgarg-1:cmds=heads+%3Bknown+nodes%3D7f4e523d01f2cc3765ac8934da3d14db775ff872 "GET /?cmd=listkeys HTTP/1.1" 401 - x-hgarg-1:namespace=phases "GET /?cmd=listkeys HTTP/1.1" 200 - x-hgarg-1:namespace=phases "GET /?cmd=listkeys HTTP/1.1" 200 - x-hgarg-1:namespace=bookmarks "GET /?cmd=branchmap HTTP/1.1" 200 - "GET /?cmd=branchmap HTTP/1.1" 200 - "GET /?cmd=listkeys HTTP/1.1" 200 - x-hgarg-1:namespace=bookmarks "POST /?cmd=unbundle HTTP/1.1" 200 - x-hgarg-1:heads=666f726365 "GET /?cmd=listkeys HTTP/1.1" 200 - x-hgarg-1:namespace=phases $ cd .. clone of serve with repo in root and unserved subrepo (issue2970) $ hg --cwd test init sub $ echo empty > test/sub/empty $ hg --cwd test/sub add empty $ hg --cwd test/sub commit -qm 'add empty' $ hg --cwd test/sub tag -r 0 something $ echo sub = sub > test/.hgsub $ hg --cwd test add .hgsub $ hg --cwd test commit -qm 'add subrepo' $ hg clone http://localhost:$HGPORT noslash-clone requesting all changes adding changesets adding manifests adding file changes added 3 changesets with 7 changes to 7 files updating to branch default abort: HTTP Error 404: Not Found [255] $ hg clone http://localhost:$HGPORT/ slash-clone requesting all changes adding changesets adding manifests adding file changes added 3 changesets with 7 changes to 7 files updating to branch default abort: HTTP Error 404: Not Found [255] check error log $ cat error.log