view Makefile @ 23575:a2f139d25845

subrepo: drop the 'ui' parameter to archive()

The current state of subrepo methods is to pass a 'ui' object to some methods,
which has the effect of overriding the subrepo configuration since it is the
root repo's 'ui' that is passed along as deep as there are subrepos.  Other
subrepo method are *not* passed the root 'ui', and instead delegate to their
repo object's 'ui'.  Even in the former case where the root 'ui' is available,
some methods are inconsistent in their use of both the root 'ui' and the local
repo's 'ui'.  (Consider hg._incoming() uses the root 'ui' for path expansion
and some status messages, but also calls bundlerepo.getremotechanges(), which
eventually calls discovery.findcommonincoming(), which calls
setdiscovery.findcommonheads(), which calls status() on the local repo 'ui'.)

This inconsistency with respect to the configured output level is probably
always hidden, because --verbose, --debug and --quiet, along with their 'ui.xxx'
equivalents in the global and user level hgrc files are propagated from the
parent repo to the subrepo via 'baseui'.  The 'ui.xxx' settings in the parent
repo hgrc file are not propagated, but that seems like an unusual thing to set
on a per repo config file.  Any 'ui.xxx' options changed by --config are also
not propagated, because they are set on repo.ui by dispatch.py, not repo.baseui.

The goal here is to cleanup the subrepo methods by dropping the 'ui' parameter,
which in turn prevents mixing subtly different 'ui' instances on a given subrepo
level.  Some methods use more than just the output level settings in 'ui' (add
for example ends up calling scmutil.checkportabilityalert() with both the root
and local repo's 'ui' at different points).  This series just goes for the low
hanging fruit and switches methods that only use the output level.

If we really care about not letting a subrepo config override the root repo's
output level, we can propagate the verbose, debug and quiet settings to the
subrepo in the same way 'ui.commitsubrepos' is in hgsubrepo.__init__.

Archive only uses the 'ui' object to call its progress() method, and gitsubrepo
calls status().

# If you want to change PREFIX, do not just edit it below. The changed
# value wont get passed on to recursive make calls. You should instead
# override the variable on the command like:
#
# % make PREFIX=/opt/ install

PREFIX=/usr/local
export PREFIX
PYTHON=python
PURE=
PYFILES:=$(shell find mercurial hgext doc -name '*.py')
DOCFILES=mercurial/help/*.txt
export LANGUAGE=C
export LC_ALL=C

# Set this to e.g. "mingw32" to use a non-default compiler.
COMPILER=

help:
	@echo 'Commonly used make targets:'
	@echo '  all          - build program and documentation'
	@echo '  install      - install program and man pages to $$PREFIX ($(PREFIX))'
	@echo '  install-home - install with setup.py install --home=$$HOME ($(HOME))'
	@echo '  local        - build for inplace usage'
	@echo '  tests        - run all tests in the automatic test suite'
	@echo '  test-foo     - run only specified tests (e.g. test-merge1.t)'
	@echo '  dist         - run all tests and create a source tarball in dist/'
	@echo '  clean        - remove files created by other targets'
	@echo '                 (except installed files or dist source tarball)'
	@echo '  update-pot   - update i18n/hg.pot'
	@echo
	@echo 'Example for a system-wide installation under /usr/local:'
	@echo '  make all && su -c "make install" && hg version'
	@echo
	@echo 'Example for a local installation (usable in this directory):'
	@echo '  make local && ./hg version'

all: build doc

local:
	$(PYTHON) setup.py $(PURE) \
	  build_py -c -d . \
	  build_ext $(COMPILER:%=-c %) -i \
	  build_hgexe $(COMPILER:%=-c %) -i \
	  build_mo
	env HGRCPATH= $(PYTHON) hg version

build:
	$(PYTHON) setup.py $(PURE) build $(COMPILER:%=-c %)

doc:
	$(MAKE) -C doc

clean:
	-$(PYTHON) setup.py clean --all # ignore errors from this command
	find contrib doc hgext i18n mercurial tests \
		\( -name '*.py[cdo]' -o -name '*.so' \) -exec rm -f '{}' ';'
	rm -f $(addprefix mercurial/,$(notdir $(wildcard mercurial/pure/[a-z]*.py)))
	rm -f MANIFEST MANIFEST.in hgext/__index__.py tests/*.err
	if test -d .hg; then rm -f mercurial/__version__.py; fi
	rm -rf build mercurial/locale
	$(MAKE) -C doc clean

install: install-bin install-doc

install-bin: build
	$(PYTHON) setup.py $(PURE) install --root="$(DESTDIR)/" --prefix="$(PREFIX)" --force

install-doc: doc
	cd doc && $(MAKE) $(MFLAGS) install

install-home: install-home-bin install-home-doc

install-home-bin: build
	$(PYTHON) setup.py $(PURE) install --home="$(HOME)" --prefix="" --force

install-home-doc: doc
	cd doc && $(MAKE) $(MFLAGS) PREFIX="$(HOME)" install

MANIFEST-doc:
	$(MAKE) -C doc MANIFEST

MANIFEST.in: MANIFEST-doc
	hg manifest | sed -e 's/^/include /' > MANIFEST.in
	echo include mercurial/__version__.py >> MANIFEST.in
	sed -e 's/^/include /' < doc/MANIFEST >> MANIFEST.in

dist:	tests dist-notests

dist-notests:	doc MANIFEST.in
	TAR_OPTIONS="--owner=root --group=root --mode=u+w,go-w,a+rX-s" $(PYTHON) setup.py -q sdist

check: tests

tests:
	cd tests && $(PYTHON) run-tests.py $(TESTFLAGS)

test-%:
	cd tests && $(PYTHON) run-tests.py $(TESTFLAGS) $@

check-code:
	hg manifest | xargs python contrib/check-code.py

update-pot: i18n/hg.pot

i18n/hg.pot: $(PYFILES) $(DOCFILES) i18n/posplit i18n/hggettext
	$(PYTHON) i18n/hggettext mercurial/commands.py \
	  hgext/*.py hgext/*/__init__.py \
	  mercurial/fileset.py mercurial/revset.py \
	  mercurial/templatefilters.py mercurial/templatekw.py \
	  mercurial/filemerge.py \
	  $(DOCFILES) > i18n/hg.pot.tmp
        # All strings marked for translation in Mercurial contain
        # ASCII characters only. But some files contain string
        # literals like this '\037\213'. xgettext thinks it has to
        # parse them even though they are not marked for translation.
        # Extracting with an explicit encoding of ISO-8859-1 will make
        # xgettext "parse" and ignore them.
	echo $(PYFILES) | xargs \
	  xgettext --package-name "Mercurial" \
	  --msgid-bugs-address "<[e-mail]>" \
	  --copyright-holder "Matt Mackall <[e-mail]> and others" \
	  --from-code ISO-8859-1 --join --sort-by-file --add-comments=i18n: \
	  -d hg -p i18n -o hg.pot.tmp
	$(PYTHON) i18n/posplit i18n/hg.pot.tmp
        # The target file is not created before the last step. So it never is in
        # an intermediate state.
	mv -f i18n/hg.pot.tmp i18n/hg.pot

%.po: i18n/hg.pot
        # work on a temporary copy for never having a half completed target
	cp $@ $@.tmp
	msgmerge --no-location --update $@.tmp $^
	mv -f $@.tmp $@

# Packaging targets

osx:
	@which bdist_mpkg >/dev/null || \
	   (echo "Missing bdist_mpkg (easy_install bdist_mpkg)"; false)
	rm -rf dist/mercurial-*.mpkg
	bdist_mpkg setup.py
	mkdir -p packages/osx
	N=`cd dist && echo mercurial-*.mpkg | sed 's,\.mpkg$$,,'` && hdiutil create -srcfolder dist/$$N.mpkg/ -scrub -volname "$$N" -ov packages/osx/$$N.dmg
	rm -rf dist/mercurial-*.mpkg

fedora20:
	mkdir -p packages/fedora20
	contrib/buildrpm
	cp rpmbuild/RPMS/*/* packages/fedora20
	cp rpmbuild/SRPMS/* packages/fedora20
	rm -rf rpmbuild

docker-fedora20:
	mkdir -p packages/fedora20
	contrib/dockerrpm fedora20

centos5:
	mkdir -p packages/centos5
	contrib/buildrpm --withpython
	cp rpmbuild/RPMS/*/* packages/centos5
	cp rpmbuild/SRPMS/* packages/centos5

docker-centos5:
	mkdir -p packages/centos5
	contrib/dockerrpm centos5 --withpython

centos6:
	mkdir -p packages/centos6
	contrib/buildrpm
	cp rpmbuild/RPMS/*/* packages/centos6
	cp rpmbuild/SRPMS/* packages/centos6

docker-centos6:
	mkdir -p packages/centos6
	contrib/dockerrpm centos6

centos7:
	mkdir -p packages/centos7
	contrib/buildrpm
	cp rpmbuild/RPMS/*/* packages/centos7
	cp rpmbuild/SRPMS/* packages/centos7

docker-centos7:
	mkdir -p packages/centos7
	contrib/dockerrpm centos7

.PHONY: help all local build doc clean install install-bin install-doc \
	install-home install-home-bin install-home-doc \
	dist dist-notests check tests check-code update-pot \
	osx fedora20 docker-fedora20 \
	centos5 docker-centos5 centos6 docker-centos6 centos7 docker-centos7