view tests/test-convert-splicemap.t @ 23575:a2f139d25845

subrepo: drop the 'ui' parameter to archive()

The current state of subrepo methods is to pass a 'ui' object to some methods,
which has the effect of overriding the subrepo configuration since it is the
root repo's 'ui' that is passed along as deep as there are subrepos.  Other
subrepo method are *not* passed the root 'ui', and instead delegate to their
repo object's 'ui'.  Even in the former case where the root 'ui' is available,
some methods are inconsistent in their use of both the root 'ui' and the local
repo's 'ui'.  (Consider hg._incoming() uses the root 'ui' for path expansion
and some status messages, but also calls bundlerepo.getremotechanges(), which
eventually calls discovery.findcommonincoming(), which calls
setdiscovery.findcommonheads(), which calls status() on the local repo 'ui'.)

This inconsistency with respect to the configured output level is probably
always hidden, because --verbose, --debug and --quiet, along with their 'ui.xxx'
equivalents in the global and user level hgrc files are propagated from the
parent repo to the subrepo via 'baseui'.  The 'ui.xxx' settings in the parent
repo hgrc file are not propagated, but that seems like an unusual thing to set
on a per repo config file.  Any 'ui.xxx' options changed by --config are also
not propagated, because they are set on repo.ui by dispatch.py, not repo.baseui.

The goal here is to cleanup the subrepo methods by dropping the 'ui' parameter,
which in turn prevents mixing subtly different 'ui' instances on a given subrepo
level.  Some methods use more than just the output level settings in 'ui' (add
for example ends up calling scmutil.checkportabilityalert() with both the root
and local repo's 'ui' at different points).  This series just goes for the low
hanging fruit and switches methods that only use the output level.

If we really care about not letting a subrepo config override the root repo's
output level, we can propagate the verbose, debug and quiet settings to the
subrepo in the same way 'ui.commitsubrepos' is in hgsubrepo.__init__.

Archive only uses the 'ui' object to call its progress() method, and gitsubrepo
calls status().

  $ echo "[extensions]" >> $HGRCPATH
  $ echo "convert=" >> $HGRCPATH
  $ glog()
  > {
  >     hg log -G --template '{rev}:{node|short} "{desc|firstline}"\
  >  files: {files}\n' "$@"
  > }
  $ hg init repo1
  $ cd repo1
  $ echo a > a
  $ hg ci -Am adda
  adding a
  $ echo b > b
  $ echo a >> a
  $ hg ci -Am addb
  adding b
  $ PARENTID1=`hg id --debug -i`
  $ echo c > c
  $ hg ci -Am addc
  adding c
  $ PARENTID2=`hg id --debug -i`
  $ cd ..
  $ glog -R repo1
  @  2:e55c719b85b6 "addc" files: c
  |
  o  1:6d4c2037ddc2 "addb" files: a b
  |
  o  0:07f494440405 "adda" files: a
  

  $ hg init repo2
  $ cd repo2
  $ echo b > a
  $ echo d > d
  $ hg ci -Am addaandd
  adding a
  adding d
  $ INVALIDID1=afd12345af
  $ INVALIDID2=28173x36ddd1e67bf7098d541130558ef5534a86
  $ CHILDID1=`hg id --debug -i`
  $ echo d >> d
  $ hg ci -Am changed
  $ CHILDID2=`hg id --debug -i`
  $ echo e > e
  $ hg ci -Am adde
  adding e
  $ cd ..
  $ glog -R repo2
  @  2:a39b65753b0a "adde" files: e
  |
  o  1:e4ea00df9189 "changed" files: d
  |
  o  0:527cdedf31fb "addaandd" files: a d
  

test invalid splicemap1

  $ cat > splicemap <<EOF
  > $CHILDID2
  > EOF
  $ hg convert --splicemap splicemap repo2 repo1
  abort: syntax error in splicemap(1): child parent1[,parent2] expected
  [255]

test invalid splicemap2

  $ cat > splicemap <<EOF
  > $CHILDID2 $PARENTID1, $PARENTID2, $PARENTID2
  > EOF
  $ hg convert --splicemap splicemap repo2 repo1
  abort: syntax error in splicemap(1): child parent1[,parent2] expected
  [255]

test invalid splicemap3

  $ cat > splicemap <<EOF
  > $INVALIDID1 $INVALIDID2
  > EOF
  $ hg convert --splicemap splicemap repo2 repo1
  abort: splicemap entry afd12345af is not a valid revision identifier
  [255]

splice repo2 on repo1

  $ cat > splicemap <<EOF
  > $CHILDID1 $PARENTID1
  > $CHILDID2 $PARENTID2,$CHILDID1
  > 
  > EOF
  $ cat splicemap
  527cdedf31fbd5ea708aa14eeecf53d4676f38db 6d4c2037ddc2cb2627ac3a244ecce35283268f8e
  e4ea00df91897da3079a10fab658c1eddba6617b e55c719b85b60e5102fac26110ba626e7cb6b7dc,527cdedf31fbd5ea708aa14eeecf53d4676f38db
  
  $ hg clone repo1 target1
  updating to branch default
  3 files updated, 0 files merged, 0 files removed, 0 files unresolved
  $ hg convert --splicemap splicemap repo2 target1
  scanning source...
  sorting...
  converting...
  2 addaandd
  spliced in ['6d4c2037ddc2cb2627ac3a244ecce35283268f8e'] as parents of 527cdedf31fbd5ea708aa14eeecf53d4676f38db
  1 changed
  spliced in ['e55c719b85b60e5102fac26110ba626e7cb6b7dc', '527cdedf31fbd5ea708aa14eeecf53d4676f38db'] as parents of e4ea00df91897da3079a10fab658c1eddba6617b
  0 adde
  $ glog -R target1
  o  5:16bc847b02aa "adde" files: e
  |
  o    4:e30e4fee3418 "changed" files: d
  |\
  | o  3:e673348c3a3c "addaandd" files: a d
  | |
  @ |  2:e55c719b85b6 "addc" files: c
  |/
  o  1:6d4c2037ddc2 "addb" files: a b
  |
  o  0:07f494440405 "adda" files: a
  



Test splicemap and conversion order

  $ hg init ordered
  $ cd ordered
  $ echo a > a
  $ hg ci -Am adda
  adding a
  $ hg branch branch
  marked working directory as branch branch
  (branches are permanent and global, did you want a bookmark?)
  $ echo a >> a
  $ hg ci -Am changea
  $ echo a >> a
  $ hg ci -Am changeaagain
  $ hg up 0
  1 files updated, 0 files merged, 0 files removed, 0 files unresolved
  $ echo b > b
  $ hg ci -Am addb
  adding b

We want 2 to depend on 1 and 3. Since 3 is always converted after 2,
the bug should be exhibited with all conversion orders.

  $ cat > ../splicemap <<EOF
  > `(hg id -r 2 -i --debug)` `(hg id -r 1 -i --debug)`, `(hg id -r 3 -i --debug)`
  > EOF
  $ cd ..
  $ cat splicemap
  7c364e7fa7d70ae525610c016317ed717b519d97 717d54d67e6c31fd75ffef2ff3042bdd98418437, 102a90ea7b4a3361e4082ed620918c261189a36a

Test regular conversion

  $ hg convert --splicemap splicemap ordered ordered-hg1
  initializing destination ordered-hg1 repository
  scanning source...
  sorting...
  converting...
  3 adda
  2 changea
  1 addb
  0 changeaagain
  spliced in ['717d54d67e6c31fd75ffef2ff3042bdd98418437', '102a90ea7b4a3361e4082ed620918c261189a36a'] as parents of 7c364e7fa7d70ae525610c016317ed717b519d97
  $ glog -R ordered-hg1
  o    3:4cb04b9afbf2 "changeaagain" files: a
  |\
  | o  2:102a90ea7b4a "addb" files: b
  | |
  o |  1:717d54d67e6c "changea" files: a
  |/
  o  0:07f494440405 "adda" files: a
  

Test conversion with parent revisions already in dest, using source
and destination identifiers. Test unknown splicemap target.

  $ hg convert -r1 ordered ordered-hg2
  initializing destination ordered-hg2 repository
  scanning source...
  sorting...
  converting...
  1 adda
  0 changea
  $ hg convert -r3 ordered ordered-hg2
  scanning source...
  sorting...
  converting...
  0 addb
  $ cat > splicemap <<EOF
  > `(hg -R ordered id -r 2 -i --debug)` \
  > `(hg -R ordered-hg2 id -r 1 -i --debug)`,\
  > `(hg -R ordered-hg2 id -r 2 -i --debug)`
  > deadbeef102a90ea7b4a3361e4082ed620918c26 deadbeef102a90ea7b4a3361e4082ed620918c27
  > EOF
  $ hg convert --splicemap splicemap ordered ordered-hg2
  scanning source...
  splice map revision deadbeef102a90ea7b4a3361e4082ed620918c26 is not being converted, ignoring
  sorting...
  converting...
  0 changeaagain
  spliced in ['717d54d67e6c31fd75ffef2ff3042bdd98418437', '102a90ea7b4a3361e4082ed620918c261189a36a'] as parents of 7c364e7fa7d70ae525610c016317ed717b519d97
  $ glog -R ordered-hg2
  o    3:4cb04b9afbf2 "changeaagain" files: a
  |\
  | o  2:102a90ea7b4a "addb" files: b
  | |
  o |  1:717d54d67e6c "changea" files: a
  |/
  o  0:07f494440405 "adda" files: a
  

Test empty conversion

  $ hg convert --splicemap splicemap ordered ordered-hg2
  scanning source...
  splice map revision deadbeef102a90ea7b4a3361e4082ed620918c26 is not being converted, ignoring
  sorting...
  converting...

Test clonebranches

  $ hg --config convert.hg.clonebranches=true convert \
  >   --splicemap splicemap ordered ordered-hg3
  initializing destination ordered-hg3 repository
  scanning source...
  abort: revision 717d54d67e6c31fd75ffef2ff3042bdd98418437 not found in destination repository (lookups with clonebranches=true are not implemented)
  [255]

Test invalid dependency

  $ cat > splicemap <<EOF
  > `(hg -R ordered id -r 2 -i --debug)` \
  > deadbeef102a90ea7b4a3361e4082ed620918c26,\
  > `(hg -R ordered-hg2 id -r 2 -i --debug)`
  > EOF
  $ hg convert --splicemap splicemap ordered ordered-hg4
  initializing destination ordered-hg4 repository
  scanning source...
  abort: unknown splice map parent: deadbeef102a90ea7b4a3361e4082ed620918c26
  [255]