view tests/test-convert-svn-encoding.t @ 23575:a2f139d25845

subrepo: drop the 'ui' parameter to archive()

The current state of subrepo methods is to pass a 'ui' object to some methods,
which has the effect of overriding the subrepo configuration since it is the
root repo's 'ui' that is passed along as deep as there are subrepos.  Other
subrepo method are *not* passed the root 'ui', and instead delegate to their
repo object's 'ui'.  Even in the former case where the root 'ui' is available,
some methods are inconsistent in their use of both the root 'ui' and the local
repo's 'ui'.  (Consider hg._incoming() uses the root 'ui' for path expansion
and some status messages, but also calls bundlerepo.getremotechanges(), which
eventually calls discovery.findcommonincoming(), which calls
setdiscovery.findcommonheads(), which calls status() on the local repo 'ui'.)

This inconsistency with respect to the configured output level is probably
always hidden, because --verbose, --debug and --quiet, along with their 'ui.xxx'
equivalents in the global and user level hgrc files are propagated from the
parent repo to the subrepo via 'baseui'.  The 'ui.xxx' settings in the parent
repo hgrc file are not propagated, but that seems like an unusual thing to set
on a per repo config file.  Any 'ui.xxx' options changed by --config are also
not propagated, because they are set on repo.ui by dispatch.py, not repo.baseui.

The goal here is to cleanup the subrepo methods by dropping the 'ui' parameter,
which in turn prevents mixing subtly different 'ui' instances on a given subrepo
level.  Some methods use more than just the output level settings in 'ui' (add
for example ends up calling scmutil.checkportabilityalert() with both the root
and local repo's 'ui' at different points).  This series just goes for the low
hanging fruit and switches methods that only use the output level.

If we really care about not letting a subrepo config override the root repo's
output level, we can propagate the verbose, debug and quiet settings to the
subrepo in the same way 'ui.commitsubrepos' is in hgsubrepo.__init__.

Archive only uses the 'ui' object to call its progress() method, and gitsubrepo
calls status().

#require svn svn-bindings

  $ cat >> $HGRCPATH <<EOF
  > [extensions]
  > convert =
  > EOF

  $ svnadmin create svn-repo
  $ svnadmin load -q svn-repo < "$TESTDIR/svn/encoding.svndump"

Convert while testing all possible outputs

  $ hg --debug convert svn-repo A-hg
  initializing destination A-hg repository
  reparent to file://*/svn-repo (glob)
  run hg sink pre-conversion action
  scanning source...
  found trunk at 'trunk'
  found tags at 'tags'
  found branches at 'branches'
  found branch branch\xc3\xa9 at 5 (esc)
  found branch branch\xc3\xa9e at 6 (esc)
  scanning: 1/4 revisions (25.00%)
  reparent to file://*/svn-repo/trunk (glob)
  fetching revision log for "/trunk" from 4 to 0
  parsing revision 4 (2 changes)
  parsing revision 3 (4 changes)
  parsing revision 2 (3 changes)
  parsing revision 1 (3 changes)
  no copyfrom path, don't know what to do.
  '/branches' is not under '/trunk', ignoring
  '/tags' is not under '/trunk', ignoring
  scanning: 2/4 revisions (50.00%)
  reparent to file://*/svn-repo/branches/branch%C3%A9 (glob)
  fetching revision log for "/branches/branch\xc3\xa9" from 5 to 0 (esc)
  parsing revision 5 (1 changes)
  reparent to file://*/svn-repo (glob)
  reparent to file://*/svn-repo/branches/branch%C3%A9 (glob)
  found parent of branch /branches/branch\xc3\xa9 at 4: /trunk (esc)
  scanning: 3/4 revisions (75.00%)
  reparent to file://*/svn-repo/branches/branch%C3%A9e (glob)
  fetching revision log for "/branches/branch\xc3\xa9e" from 6 to 0 (esc)
  parsing revision 6 (1 changes)
  reparent to file://*/svn-repo (glob)
  reparent to file://*/svn-repo/branches/branch%C3%A9e (glob)
  found parent of branch /branches/branch\xc3\xa9e at 5: /branches/branch\xc3\xa9 (esc)
  scanning: 4/4 revisions (100.00%)
  scanning: 5/4 revisions (125.00%)
  scanning: 6/4 revisions (150.00%)
  sorting...
  converting...
  5 init projA
  source: svn:afeb9c47-92ff-4c0c-9f72-e1f6eb8ac9af/trunk@1
  converting: 0/6 revisions (0.00%)
  4 hello
  source: svn:afeb9c47-92ff-4c0c-9f72-e1f6eb8ac9af/trunk@2
  converting: 1/6 revisions (16.67%)
  reparent to file://*/svn-repo/trunk (glob)
  scanning paths: /trunk/\xc3\xa0 0/3 (0.00%) (esc)
  scanning paths: /trunk/\xc3\xa0/e\xcc\x81 1/3 (33.33%) (esc)
  scanning paths: /trunk/\xc3\xa9 2/3 (66.67%) (esc)
  \xc3\xa0/e\xcc\x81 (esc)
  getting files: \xc3\xa0/e\xcc\x81 1/2 (50.00%) (esc)
  \xc3\xa9 (esc)
  getting files: \xc3\xa9 2/2 (100.00%) (esc)
  3 copy files
  source: svn:afeb9c47-92ff-4c0c-9f72-e1f6eb8ac9af/trunk@3
  converting: 2/6 revisions (33.33%)
  scanning paths: /trunk/\xc3\xa0 0/4 (0.00%) (esc)
  gone from -1
  reparent to file://*/svn-repo (glob)
  reparent to file://*/svn-repo/trunk (glob)
  scanning paths: /trunk/\xc3\xa8 1/4 (25.00%) (esc)
  copied to \xc3\xa8 from \xc3\xa9@2 (esc)
  scanning paths: /trunk/\xc3\xa9 2/4 (50.00%) (esc)
  gone from -1
  reparent to file://*/svn-repo (glob)
  reparent to file://*/svn-repo/trunk (glob)
  scanning paths: /trunk/\xc3\xb9 3/4 (75.00%) (esc)
  mark /trunk/\xc3\xb9 came from \xc3\xa0:2 (esc)
  \xc3\xa0/e\xcc\x81 (esc)
  getting files: \xc3\xa0/e\xcc\x81 1/4 (25.00%) (esc)
  \xc3\xa8 (esc)
  getting files: \xc3\xa8 2/4 (50.00%) (esc)
   \xc3\xa8: copy \xc3\xa9:6b67ccefd5ce6de77e7ead4f5292843a0255329f (esc)
  \xc3\xa9 (esc)
  getting files: \xc3\xa9 3/4 (75.00%) (esc)
  \xc3\xb9/e\xcc\x81 (esc)
  getting files: \xc3\xb9/e\xcc\x81 4/4 (100.00%) (esc)
   \xc3\xb9/e\xcc\x81: copy \xc3\xa0/e\xcc\x81:a9092a3d84a37b9993b5c73576f6de29b7ea50f6 (esc)
  2 remove files
  source: svn:afeb9c47-92ff-4c0c-9f72-e1f6eb8ac9af/trunk@4
  converting: 3/6 revisions (50.00%)
  scanning paths: /trunk/\xc3\xa8 0/2 (0.00%) (esc)
  gone from -1
  reparent to file://*/svn-repo (glob)
  reparent to file://*/svn-repo/trunk (glob)
  scanning paths: /trunk/\xc3\xb9 1/2 (50.00%) (esc)
  gone from -1
  reparent to file://*/svn-repo (glob)
  reparent to file://*/svn-repo/trunk (glob)
  \xc3\xa8 (esc)
  getting files: \xc3\xa8 1/2 (50.00%) (esc)
  \xc3\xb9/e\xcc\x81 (esc)
  getting files: \xc3\xb9/e\xcc\x81 2/2 (100.00%) (esc)
  1 branch to branch?
  source: svn:afeb9c47-92ff-4c0c-9f72-e1f6eb8ac9af/branches/branch?@5
  converting: 4/6 revisions (66.67%)
  reparent to file://*/svn-repo/branches/branch%C3%A9 (glob)
  scanning paths: /branches/branch\xc3\xa9 0/1 (0.00%) (esc)
  0 branch to branch?e
  source: svn:afeb9c47-92ff-4c0c-9f72-e1f6eb8ac9af/branches/branch?e@6
  converting: 5/6 revisions (83.33%)
  reparent to file://*/svn-repo/branches/branch%C3%A9e (glob)
  scanning paths: /branches/branch\xc3\xa9e 0/1 (0.00%) (esc)
  reparent to file://*/svn-repo (glob)
  reparent to file://*/svn-repo/branches/branch%C3%A9e (glob)
  reparent to file://*/svn-repo (glob)
  reparent to file://*/svn-repo/branches/branch%C3%A9e (glob)
  updating tags
  .hgtags
  run hg sink post-conversion action
  $ cd A-hg
  $ hg up
  1 files updated, 0 files merged, 0 files removed, 0 files unresolved

Check tags are in UTF-8

  $ cat .hgtags
  e94e4422020e715add80525e8f0f46c9968689f1 branch\xc3\xa9e (esc)
  f7e66f98380ed1e53a797c5c7a7a2616a7ab377d branch\xc3\xa9 (esc)

  $ cd ..