Mercurial > hg
view hgext/purge.py @ 38956:a3cabe9415e1
dirstate: use visitchildrenset in traverse
This speeds up `hg status` a fair amount when there is a very large directory
and narrow is in use.
Timing numbers according to command:
hyperfine --warmup 1 'hg status'
HGRCPATH points to a file with the following contents:
[extensions]
narrow =
mozilla-unified (called m-u below) was at revision #468856.
regular hash: eb39298e432d
treemanifests hash: 0553b7f29eaf
large-dir-repo (called l-d-r below) was generated with the following script:
#!/bin/bash
hg init large-dir-repo
mkdir -p large-dir-repo/third_party/rust/log
touch large-dir-repo/third_party/rust/log/foo.txt
for i in $(seq 1 30000); do
d=$(mktemp -d large-dir-repo/third_party/XXXXXXXXX)
touch $d/file.txt
done
hg -R large-dir-repo ci -Am 'rev0' --user test --date '0 0'
for repos that use narrow, the narrowspec was this:
[includes]
rootfilesin:third_party/rust/log
[excludes]
This narrowspec was chosen due to the size of the third_party/rust directory;
this directory was *not* modified in revision #468856 in mozilla-unified.
Importantly, when using narrow, these repos had everything checked out (in the
case of large-dir-repo, that means all 30,001 directories), *before* adding the
narrowspec. This is to simulate the behavior when using a virtual filesystem
that shows everything for the user even if they haven't added it to the
narrowspec yet. This is not a supported configuration, and `hg update` will not
really do the "correct" thing, but non-mutating commands should behave
correctly.
There are two repos below that do not follow the setup above, 'citc1' and
'citc2', which are using a virtual filesystem and can not be reproduced
upstream; these numbers are here mostly to indicate that these performance
improvements are not hypothetical, and show the benefits we're hoping to achieve
on our real workloads. 'citc1' is closest to large-dir-repo with one of our
pathological cases, 'citc2' is an arbitrary repo and closer to "average".
I'm not claiming anything less than a 5% speed win as improvements due to this
change; these are probably eiter measurement artifacts or constant time
improvements. The numbers that aren't changing are shown primarily to prove that
this doesn't make anything worse in any case I plan on testing during this
series.
'before' is hg from commit c83ad576. 'N' indicates narrow in use, 'T' indicates
treemanifest in use.
hg status:
repo | N | T | before (mean +- stdev) | after (mean +- stdev) | % of before
------+---+---+------------------------+-----------------------+------------
m-u | | | 2.284 s +- 0.022 s | 2.274 s +- 0.021 s | 99.6%
m-u | | x | 2.289 s +- 0.008 s | 2.284 s +- 0.028 s | 99.8%
m-u | x | | 430.8 ms +- 3.1 ms | 424.5 ms +- 3.2 ms | 98.5%
m-u | x | x | 429.8 ms +- 2.5 ms | 425.8 ms +- 3.7 ms | 99.1%
l-d-r | | | 681.3 ms +- 5.5 ms | 689.6 ms +- 8.0 ms | 101.2%
l-d-r | | x | 666.8 ms +- 21.8 ms | 672.5 ms +- 14.9 ms | 100.9%
l-d-r | x | | 282.6 ms +- 1.8 ms | 203.0 ms +- 1.2 ms | 71.8% <--
l-d-r | x | x | 275.2 ms +- 3.9 ms | 199.3 ms +- 3.5 ms | 72.4% <--
citc1 | x | x | 1.023 s +- 0.011 s | 398.6 ms +- 9.2 ms | 39.0% <--
citc2 | x | x | 297.9 ms +- 4.4 ms | 289.6 ms +- 4.2 ms | 97.2%
hg status --change .:
repo | N | T | before (mean +- stdev) | after (mean +- stdev) | % of before
------+---+---+------------------------+-----------------------+------------
m-u | | | 478.2 ms +- 2.0 ms | 476.9 ms +- 3.7 ms | 99.7%
m-u | | x | 169.5 ms +- 2.7 ms | 169.5 ms +- 2.5 ms | 100.0%
m-u | x | | 477.0 ms +- 2.4 ms | 476.1 ms +- 1.4 ms | 99.8%
m-u | x | x | 124.7 ms +- 1.9 ms | 124.2 ms +- 3.3 ms | 99.6%
l-d-r | | | 97.4 ms +- 1.2 ms | 96.5 ms +- 1.2 ms | 99.1%
l-d-r | | x | 4.778 s +- 0.018 s | 4.774 s +- 0.011 s | 99.9%
l-d-r | x | | 99.9 ms +- 1.1 ms | 98.8 ms +- 1.3 ms | 98.9%
l-d-r | x | x | 848.7 ms +- 7.1 ms | 849.4 ms +- 6.5 ms | 100.1%
citc1 | x | x | 4.250 s +- 0.051 s | 4.283 s +- 0.042 s | 100.8%
citc2 | x | x | 341.5 ms +- 4.7 ms | 341.5 ms +- 4.1 ms | 100.0%
hg update $rev^; hg update $rev:
repo | N | T | before (mean +- stdev) | after (mean +- stdev) | % of before
------+---+---+------------------------+-----------------------+------------
m-u | | | 4.357 s +- 0.032 s | 4.312 s +- 0.093 s | 99.0%
m-u | | x | 3.599 s +- 0.061 s | 3.592 s +- 0.071 s | 99.8%
m-u | x | | 1.815 s +- 0.012 s | 1.816 s +- 0.013 s | 100.1%
m-u | x | x | 1.110 s +- 0.009 s | 1.106 s +- 0.005 s | 99.6%
l-d-r | | | 527.1 ms +- 7.8 ms | 523.3 ms +- 6.5 ms | 99.3%
l-d-r | | x | 8.835 s +- 0.067 s | 8.825 s +- 0.064 s | 99.9%
l-d-r | x | | 313.0 ms +- 2.2 ms | 312.1 ms +- 1.2 ms | 99.7%
l-d-r | x | x | 1.780 s +- 0.011 s | 1.799 s +- 0.013 s | 101.1%
citc1 | x | x | 6.825 s +- 0.262 s | 6.707 s +- 0.353 s | 98.3%
citc2 | x | x | 776.4 ms +- 4.5 ms | 781.3 ms +- 6.3 ms | 100.6%
hg diff:
repo | N | T | before (mean +- stdev) | after (mean +- stdev) | % of before
------+---+---+------------------------+-----------------------+------------
m-u | | | 1.519 s +- 0.015 s | 1.525 s +- 0.017 s | 100.4%
m-u | | x | 1.512 s +- 0.010 s | 1.517 s +- 0.027 s | 100.3%
m-u | x | | 420.0 ms +- 3.2 ms | 417.1 ms +- 1.9 ms | 99.3%
m-u | x | x | 415.0 ms +- 3.8 ms | 415.7 ms +- 2.7 ms | 100.2%
l-d-r | | | 220.8 ms +- 4.0 ms | 220.8 ms +- 3.7 ms | 100.0%
l-d-r | | x | 216.6 ms +- 7.5 ms | 211.4 ms +- 2.1 ms | 97.6%
l-d-r | x | | 111.9 ms +- 1.8 ms | 112.0 ms +- 1.5 ms | 100.1%
l-d-r | x | x | 111.4 ms +- 1.4 ms | 110.2 ms +- 1.0 ms | 98.9%
citc1 | x | x | 268.7 ms +- 2.3 ms | 269.6 ms +- 2.8 ms | 100.3%
citc2 | x | x | 273.5 ms +- 5.5 ms | 273.9 ms +- 3.7 ms | 100.1%
hg diff -c .:
repo | N | T | before (mean +- stdev) | after (mean +- stdev) | % of before
------+---+---+--------------------------+-----------------------+----------
m-u | | | 497.1 ms +- 1.4 ms | 500.1 ms +- 2.4 ms | 100.6%
m-u | | x | 195.3 ms +- 13.2 ms | 191.6 ms +- 3.0 ms | 98.1%
m-u | x | | 476.8 ms +- 1.9 ms | 476.7 ms +- 2.3 ms | 100.0%
m-u | x | x | 122.8 ms +- 2.1 ms | 122.9 ms +- 2.0 ms | 100.1%
l-d-r | | | 99.3 ms +- 2.3 ms | 98.8 ms +- 1.7 ms | 99.5%
l-d-r | | x | 4.875 s +- 0.041 s | 4.847 s +- 0.038 s | 99.4%
l-d-r | x | | 98.5 ms +- 1.2 ms | 98.9 ms +- 1.3 ms | 100.4%
l-d-r | x | x | 864.6 ms +- 7.4 ms | 855.4 ms +- 6.6 ms | 98.9%
citc1 | x | x | 4.505 s +- 0.060 s | 4.466 s +- 0.036 s | 99.1%
citc2 | x | x | 368.0 ms +- 4.0 ms | 365.5 ms +- 6.3 ms | 99.3%
Differential Revision: https://phab.mercurial-scm.org/D4131
author | Kyle Lippincott <spectral@google.com> |
---|---|
date | Tue, 31 Jul 2018 16:47:43 -0700 |
parents | 5a3f8da663e5 |
children | 7fea205fd5dc |
line wrap: on
line source
# Copyright (C) 2006 - Marco Barisione <marco@barisione.org> # # This is a small extension for Mercurial (https://mercurial-scm.org/) # that removes files not known to mercurial # # This program was inspired by the "cvspurge" script contained in CVS # utilities (http://www.red-bean.com/cvsutils/). # # For help on the usage of "hg purge" use: # hg help purge # # This program is free software; you can redistribute it and/or modify # it under the terms of the GNU General Public License as published by # the Free Software Foundation; either version 2 of the License, or # (at your option) any later version. # # This program is distributed in the hope that it will be useful, # but WITHOUT ANY WARRANTY; without even the implied warranty of # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the # GNU General Public License for more details. # # You should have received a copy of the GNU General Public License # along with this program; if not, see <http://www.gnu.org/licenses/>. '''command to delete untracked files from the working directory''' from __future__ import absolute_import import os from mercurial.i18n import _ from mercurial import ( cmdutil, error, pycompat, registrar, scmutil, util, ) cmdtable = {} command = registrar.command(cmdtable) # Note for extension authors: ONLY specify testedwith = 'ships-with-hg-core' for # extensions which SHIP WITH MERCURIAL. Non-mainline extensions should # be specifying the version(s) of Mercurial they are tested with, or # leave the attribute unspecified. testedwith = 'ships-with-hg-core' @command('purge|clean', [('a', 'abort-on-err', None, _('abort if an error occurs')), ('', 'all', None, _('purge ignored files too')), ('', 'dirs', None, _('purge empty directories')), ('', 'files', None, _('purge files')), ('p', 'print', None, _('print filenames instead of deleting them')), ('0', 'print0', None, _('end filenames with NUL, for use with xargs' ' (implies -p/--print)')), ] + cmdutil.walkopts, _('hg purge [OPTION]... [DIR]...')) def purge(ui, repo, *dirs, **opts): '''removes files not tracked by Mercurial Delete files not known to Mercurial. This is useful to test local and uncommitted changes in an otherwise-clean source tree. This means that purge will delete the following by default: - Unknown files: files marked with "?" by :hg:`status` - Empty directories: in fact Mercurial ignores directories unless they contain files under source control management But it will leave untouched: - Modified and unmodified tracked files - Ignored files (unless --all is specified) - New files added to the repository (with :hg:`add`) The --files and --dirs options can be used to direct purge to delete only files, only directories, or both. If neither option is given, both will be deleted. If directories are given on the command line, only files in these directories are considered. Be careful with purge, as you could irreversibly delete some files you forgot to add to the repository. If you only want to print the list of files that this program would delete, use the --print option. ''' opts = pycompat.byteskwargs(opts) act = not opts.get('print') eol = '\n' if opts.get('print0'): eol = '\0' act = False # --print0 implies --print removefiles = opts.get('files') removedirs = opts.get('dirs') if not removefiles and not removedirs: removefiles = True removedirs = True def remove(remove_func, name): if act: try: remove_func(repo.wjoin(name)) except OSError: m = _('%s cannot be removed') % name if opts.get('abort_on_err'): raise error.Abort(m) ui.warn(_('warning: %s\n') % m) else: ui.write('%s%s' % (name, eol)) match = scmutil.match(repo[None], dirs, opts) if removedirs: directories = [] match.explicitdir = match.traversedir = directories.append status = repo.status(match=match, ignored=opts.get('all'), unknown=True) if removefiles: for f in sorted(status.unknown + status.ignored): if act: ui.note(_('removing file %s\n') % f) remove(util.unlink, f) if removedirs: for f in sorted(directories, reverse=True): if match(f) and not os.listdir(repo.wjoin(f)): if act: ui.note(_('removing directory %s\n') % f) remove(os.rmdir, f)