rebase: exclude descendants of obsoletes w/o a successor in dest (
issue5300)
.. feature::
Let 'hg rebase' avoid content-divergence by skipping obsolete
changesets (and their descendants) when they are present in the rebase
set along with one of their successors but none of their successors is
in destination.
In the following example, when trying to rebase 3:: onto 2, the rebase
will abort with "this rebase will cause divergence from: 4":
o 7 f
|
| o 6 e
| |
| o 5 d'
| |
x | 4 d (rewritten as 5)
|/
o 3 c
|
| o 2 x
| |
o | 1 b
|/
o 0 a
By excluding obsolete changesets without a successor in destination (4
in the example above) and their descendants, we make rebase work in this
case, thus giving:
o 11 e
|
o 10 d'
|
o 9 c
|
o 8 b
|
| o 7 f
| |
| | x 6 e (rewritten using rebase as 11)
| | |
| | x 5 d' (rewritten using rebase as 10)
| | |
| x | 4 d
| |/
| x 3 c (rewritten using rebase as 9)
| |
o | 2 x
| |
| x 1 b (rewritten using rebase as 8)
|/
o 0 a
where branch 4:: is left behind while branch 5:: is rebased as expected.
The rationale is that users may not be interested in rebasing orphan
changesets when specifying a rebase set that include them but would
still want "stable" ones to be rebased. Currently, the user is suggested
to allow divergence (but probably does not want it) or they must specify
a rebase set excluding problematic changesets (which might be a bit
cumbersome). The approach proposed here corresponds to "Option 2" in
https://www.mercurial-scm.org/wiki/CEDRebase.
We extend _computeobsoletenotrebased() so that it also return a set of
obsolete changesets in rebase set without a successor in destination but
with at least one successor in rebase set. This
'obsoletewithoutsuccessorindestination' is then stored as an attribute
of rebaseruntime and used in _performrebasesubset() to:
* filter out descendants of these changesets from the revisions to
rebase;
* issue a message about these revisions being skipped.
This only occurs if 'evolution.allowdivergence' option is off and
'rebaseskipobsolete' is on.
# profiling.py - profiling functions
#
# Copyright 2016 Gregory Szorc <gregory.szorc@gmail.com>
#
# This software may be used and distributed according to the terms of the
# GNU General Public License version 2 or any later version.
from __future__ import absolute_import, print_function
import contextlib
from .i18n import _
from . import (
encoding,
error,
extensions,
util,
)
def _loadprofiler(ui, profiler):
"""load profiler extension. return profile method, or None on failure"""
extname = profiler
extensions.loadall(ui, whitelist=[extname])
try:
mod = extensions.find(extname)
except KeyError:
return None
else:
return getattr(mod, 'profile', None)
@contextlib.contextmanager
def lsprofile(ui, fp):
format = ui.config('profiling', 'format')
field = ui.config('profiling', 'sort')
limit = ui.configint('profiling', 'limit')
climit = ui.configint('profiling', 'nested')
if format not in ['text', 'kcachegrind']:
ui.warn(_("unrecognized profiling format '%s'"
" - Ignored\n") % format)
format = 'text'
try:
from . import lsprof
except ImportError:
raise error.Abort(_(
'lsprof not available - install from '
'http://codespeak.net/svn/user/arigo/hack/misc/lsprof/'))
p = lsprof.Profiler()
p.enable(subcalls=True)
try:
yield
finally:
p.disable()
if format == 'kcachegrind':
from . import lsprofcalltree
calltree = lsprofcalltree.KCacheGrind(p)
calltree.output(fp)
else:
# format == 'text'
stats = lsprof.Stats(p.getstats())
stats.sort(field)
stats.pprint(limit=limit, file=fp, climit=climit)
@contextlib.contextmanager
def flameprofile(ui, fp):
try:
from flamegraph import flamegraph
except ImportError:
raise error.Abort(_(
'flamegraph not available - install from '
'https://github.com/evanhempel/python-flamegraph'))
# developer config: profiling.freq
freq = ui.configint('profiling', 'freq')
filter_ = None
collapse_recursion = True
thread = flamegraph.ProfileThread(fp, 1.0 / freq,
filter_, collapse_recursion)
start_time = util.timer()
try:
thread.start()
yield
finally:
thread.stop()
thread.join()
print('Collected %d stack frames (%d unique) in %2.2f seconds.' % (
util.timer() - start_time, thread.num_frames(),
thread.num_frames(unique=True)))
@contextlib.contextmanager
def statprofile(ui, fp):
from . import statprof
freq = ui.configint('profiling', 'freq')
if freq > 0:
# Cannot reset when profiler is already active. So silently no-op.
if statprof.state.profile_level == 0:
statprof.reset(freq)
else:
ui.warn(_("invalid sampling frequency '%s' - ignoring\n") % freq)
statprof.start(mechanism='thread')
try:
yield
finally:
data = statprof.stop()
profformat = ui.config('profiling', 'statformat')
formats = {
'byline': statprof.DisplayFormats.ByLine,
'bymethod': statprof.DisplayFormats.ByMethod,
'hotpath': statprof.DisplayFormats.Hotpath,
'json': statprof.DisplayFormats.Json,
'chrome': statprof.DisplayFormats.Chrome,
}
if profformat in formats:
displayformat = formats[profformat]
else:
ui.warn(_('unknown profiler output format: %s\n') % profformat)
displayformat = statprof.DisplayFormats.Hotpath
kwargs = {}
def fraction(s):
if isinstance(s, (float, int)):
return float(s)
if s.endswith('%'):
v = float(s[:-1]) / 100
else:
v = float(s)
if 0 <= v <= 1:
return v
raise ValueError(s)
if profformat == 'chrome':
showmin = ui.configwith(fraction, 'profiling', 'showmin', 0.005)
showmax = ui.configwith(fraction, 'profiling', 'showmax')
kwargs.update(minthreshold=showmin, maxthreshold=showmax)
elif profformat == 'hotpath':
# inconsistent config: profiling.showmin
limit = ui.configwith(fraction, 'profiling', 'showmin', 0.05)
kwargs['limit'] = limit
statprof.display(fp, data=data, format=displayformat, **kwargs)
class profile(object):
"""Start profiling.
Profiling is active when the context manager is active. When the context
manager exits, profiling results will be written to the configured output.
"""
def __init__(self, ui, enabled=True):
self._ui = ui
self._output = None
self._fp = None
self._fpdoclose = True
self._profiler = None
self._enabled = enabled
self._entered = False
self._started = False
def __enter__(self):
self._entered = True
if self._enabled:
self.start()
return self
def start(self):
"""Start profiling.
The profiling will stop at the context exit.
If the profiler was already started, this has no effect."""
if not self._entered:
raise error.ProgrammingError()
if self._started:
return
self._started = True
profiler = encoding.environ.get('HGPROF')
proffn = None
if profiler is None:
profiler = self._ui.config('profiling', 'type')
if profiler not in ('ls', 'stat', 'flame'):
# try load profiler from extension with the same name
proffn = _loadprofiler(self._ui, profiler)
if proffn is None:
self._ui.warn(_("unrecognized profiler '%s' - ignored\n")
% profiler)
profiler = 'stat'
self._output = self._ui.config('profiling', 'output')
try:
if self._output == 'blackbox':
self._fp = util.stringio()
elif self._output:
path = self._ui.expandpath(self._output)
self._fp = open(path, 'wb')
else:
self._fpdoclose = False
self._fp = self._ui.ferr
if proffn is not None:
pass
elif profiler == 'ls':
proffn = lsprofile
elif profiler == 'flame':
proffn = flameprofile
else:
proffn = statprofile
self._profiler = proffn(self._ui, self._fp)
self._profiler.__enter__()
except: # re-raises
self._closefp()
raise
def __exit__(self, exception_type, exception_value, traceback):
propagate = None
if self._profiler is not None:
propagate = self._profiler.__exit__(exception_type, exception_value,
traceback)
if self._output == 'blackbox':
val = 'Profile:\n%s' % self._fp.getvalue()
# ui.log treats the input as a format string,
# so we need to escape any % signs.
val = val.replace('%', '%%')
self._ui.log('profile', val)
self._closefp()
return propagate
def _closefp(self):
if self._fpdoclose and self._fp is not None:
self._fp.close()