view tests/test-convert-bzr.t @ 48598:a6f16ec07ed7

stream-clone: add a explicit test for format change during stream clone

They are different kind of requirements, the one which impact the data storage
and are relevant to the files being streamed and the one which does not. For
example some requirements are only relevant to the working copy, like sparse, or
dirstate-v2.

Since they are irrelevant to the content being streamed, they do not prevent the
receiving side to use streaming clone and mercurial skip adverting them over
the wire and, ideally, within the bundle.

In addition, this let the client decide to use whichever format it desire for
the part that does not affect the store itself. So the configuration related to
these format are used as normal when doing a streaming clone.

In practice, the feature was not really tested and is badly broken with bundle-2,
since the requirements are not filtered out from the stream bundle.

So we start with adding simple tests as a good base before the fix and adjust
the feature.

Differential Revision: https://phab.mercurial-scm.org/D12029

#require bzr

  $ . "$TESTDIR/bzr-definitions"

create and rename on the same file in the same step

  $ mkdir test-createandrename
  $ cd test-createandrename
  $ brz init -q source

test empty repo conversion (issue3233)

  $ hg convert source source-hg
  initializing destination source-hg repository
  scanning source...
  sorting...
  converting...

back to the rename stuff

  $ cd source
  $ echo a > a
  $ echo c > c
  $ echo e > e
  $ brz add -q a c e
  $ brz commit -q -m 'Initial add: a, c, e'
  $ brz mv a b
  a => b
  $ brz mv c d
  c => d
  $ brz mv e f
  e => f
  $ echo a2 >> a
  $ mkdir e
  $ brz add -q a e
  $ brz commit -q -m 'rename a into b, create a, rename c into d'
  $ cd ..
  $ hg convert source source-hg
  scanning source...
  sorting...
  converting...
  1 Initial add: a, c, e
  0 rename a into b, create a, rename c into d
  $ glog -R source-hg
  o  1@source "rename a into b, create a, rename c into d" files+: [b d f], files-: [c e], files: [a]
  |
  o  0@source "Initial add: a, c, e" files+: [a c e], files-: [], files: []
  

manifest

  $ hg manifest -R source-hg -r tip
  a
  b
  d
  f

test --rev option

  $ hg convert -r 1 source source-1-hg
  initializing destination source-1-hg repository
  scanning source...
  sorting...
  converting...
  0 Initial add: a, c, e
  $ glog -R source-1-hg
  o  0@source "Initial add: a, c, e" files+: [a c e], files-: [], files: []
  

test with filemap

  $ cat > filemap <<EOF
  > exclude a
  > EOF
  $ hg convert --filemap filemap source source-filemap-hg
  initializing destination source-filemap-hg repository
  scanning source...
  sorting...
  converting...
  1 Initial add: a, c, e
  0 rename a into b, create a, rename c into d
  $ hg -R source-filemap-hg manifest -r tip
  b
  d
  f

convert from lightweight checkout

  $ brz checkout --lightweight source source-light
  $ hg convert -s bzr source-light source-light-hg
  initializing destination source-light-hg repository
  warning: lightweight checkouts may cause conversion failures, try with a regular branch instead.
  $TESTTMP/test-createandrename/source-light does not look like a Bazaar repository
  abort: source-light: missing or unsupported repository
  [255]

extract timestamps that look just like hg's {date|isodate}:
yyyy-mm-dd HH:MM zzzz (no seconds!)
compare timestamps

  $ cd source
  $ brz log | \
  >   sed '/timestamp/!d;s/.\{15\}\([0-9: -]\{16\}\):.. \(.[0-9]\{4\}\)/\1 \2/' \
  >   > ../bzr-timestamps
  $ cd ..
  $ hg -R source-hg log --template "{date|isodate}\n" > hg-timestamps
  $ cmp bzr-timestamps hg-timestamps || diff -u bzr-timestamps hg-timestamps
  $ cd ..

merge

  $ mkdir test-merge
  $ cd test-merge
  $ cat > helper.py <<EOF
  > import sys
  > from breezy import workingtree
  > import breezy.bzr.bzrdir
  > wt = workingtree.WorkingTree.open('.')
  > 
  > message, stamp = sys.argv[1:]
  > wt.commit(message, timestamp=int(stamp))
  > EOF
  $ brz init -q source
  $ cd source
  $ echo content > a
  $ echo content2 > b
  $ brz add -q a b
  $ brz commit -q -m 'Initial add'
  $ cd ..
  $ brz branch -q source source-improve
  $ cd source
  $ echo more >> a
  $ "$PYTHON" ../helper.py 'Editing a' 100
  $ cd ../source-improve
  $ echo content3 >> b
  $ "$PYTHON" ../helper.py 'Editing b' 200
  $ cd ../source
  $ brz merge -q ../source-improve
  $ brz commit -q -m 'Merged improve branch'
  $ cd ..
  $ hg convert --datesort source source-hg
  initializing destination source-hg repository
  scanning source...
  sorting...
  converting...
  3 Initial add
  2 Editing a
  1 Editing b
  0 Merged improve branch
  $ glog -R source-hg
  o    3@source "Merged improve branch" files+: [], files-: [], files: []
  |\
  | o  2@source-improve "Editing b" files+: [], files-: [], files: [b]
  | |
  o |  1@source "Editing a" files+: [], files-: [], files: [a]
  |/
  o  0@source "Initial add" files+: [a b], files-: [], files: []
  
  $ cd ..

#if symlink execbit

symlinks and executable files

  $ mkdir test-symlinks
  $ cd test-symlinks
  $ brz init -q source
  $ cd source
  $ touch program
  $ chmod +x program
  $ ln -s program altname
  $ mkdir d
  $ echo a > d/a
  $ ln -s a syma
  $ brz add -q altname program syma d/a
  $ brz commit -q -m 'Initial setup'
  $ touch newprog
  $ chmod +x newprog
  $ rm altname
  $ ln -s newprog altname
  $ chmod -x program
  $ brz add -q newprog
  $ brz commit -q -m 'Symlink changed, x bits changed'
  $ cd ..
  $ hg convert source source-hg
  initializing destination source-hg repository
  scanning source...
  sorting...
  converting...
  1 Initial setup
  0 Symlink changed, x bits changed
  $ manifest source-hg 0
  % manifest of 0
  644 @ altname
  644   d/a
  755 * program
  644 @ syma
  $ manifest source-hg tip
  % manifest of tip
  644 @ altname
  644   d/a
  755 * newprog
  644   program
  644 @ syma

test the symlinks can be recreated

  $ cd source-hg
  $ hg up
  5 files updated, 0 files merged, 0 files removed, 0 files unresolved
  $ hg cat syma; echo
  a
  $ cd ../..

#endif

Multiple branches

  $ brz init-repo -q --no-trees repo
  $ brz init -q repo/trunk
  $ brz co repo/trunk repo-trunk
  $ cd repo-trunk
  $ echo a > a
  $ brz add -q a
  $ brz ci -qm adda
  $ brz tag trunk-tag
  Created tag trunk-tag.
  $ brz switch -b branch
  Tree is up to date at revision 1.
  Switched to branch*repo/branch/ (glob)
  $ echo b > b
  $ brz add -q b
  $ brz ci -qm addb
  $ brz tag branch-tag
  Created tag branch-tag.
  $ brz switch --force ../repo/trunk
  Updated to revision 1.
  Switched to branch*/repo/trunk/ (glob)
  $ echo a >> a
  $ brz ci -qm changea
  $ cd ..
  $ hg convert --datesort repo repo-bzr
  initializing destination repo-bzr repository
  scanning source...
  sorting...
  converting...
  2 adda
  1 addb
  0 changea
  updating tags
  $ (cd repo-bzr; glog)
  o  3@default "update tags" files+: [.hgtags], files-: [], files: []
  |
  o  2@default "changea" files+: [], files-: [], files: [a]
  |
  | o  1@branch "addb" files+: [b], files-: [], files: []
  |/
  o  0@default "adda" files+: [a], files-: [], files: []
  

Test tags (converted identifiers are not stable because bzr ones are
not and get incorporated in extra fields).

  $ hg -R repo-bzr tags
  tip                                3:* (glob)
  branch-tag                         1:* (glob)
  trunk-tag                          0:* (glob)

Nested repositories (issue3254)

  $ brz init-repo -q --no-trees repo/inner
  $ brz init -q repo/inner/trunk
  $ brz co repo/inner/trunk inner-trunk
  $ cd inner-trunk
  $ echo b > b
  $ brz add -q b
  $ brz ci -qm addb
  $ cd ..
  $ hg convert --datesort repo noinner-bzr
  initializing destination noinner-bzr repository
  scanning source...
  sorting...
  converting...
  2 adda
  1 addb
  0 changea
  updating tags