view tests/test-diffstat.t @ 48598:a6f16ec07ed7

stream-clone: add a explicit test for format change during stream clone

They are different kind of requirements, the one which impact the data storage
and are relevant to the files being streamed and the one which does not. For
example some requirements are only relevant to the working copy, like sparse, or
dirstate-v2.

Since they are irrelevant to the content being streamed, they do not prevent the
receiving side to use streaming clone and mercurial skip adverting them over
the wire and, ideally, within the bundle.

In addition, this let the client decide to use whichever format it desire for
the part that does not affect the store itself. So the configuration related to
these format are used as normal when doing a streaming clone.

In practice, the feature was not really tested and is badly broken with bundle-2,
since the requirements are not filtered out from the stream bundle.

So we start with adding simple tests as a good base before the fix and adjust
the feature.

Differential Revision: https://phab.mercurial-scm.org/D12029

  $ hg init repo
  $ cd repo
  $ i=0; while [ "$i" -lt 213 ]; do echo a >> a; i=`expr $i + 1`; done
  $ hg add a
  $ cp a b
  $ hg add b

Wide diffstat:

  $ hg diff --stat
   a |  213 ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
   b |  213 ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
   2 files changed, 426 insertions(+), 0 deletions(-)

diffstat width:

  $ COLUMNS=24 hg diff --config ui.interactive=true --stat
   a |  213 ++++++++++++++
   b |  213 ++++++++++++++
   2 files changed, 426 insertions(+), 0 deletions(-)

  $ hg ci -m adda

  $ cat >> a <<EOF
  > a
  > a
  > a
  > EOF

Narrow diffstat:

  $ hg diff --stat
   a |  3 +++
   1 files changed, 3 insertions(+), 0 deletions(-)

  $ hg ci -m appenda

  >>> open("c", "wb").write(b"\0") and None
  $ touch d
  $ hg add c d

Binary diffstat:

  $ hg diff --stat
   c |  Bin 
   1 files changed, 0 insertions(+), 0 deletions(-)

Binary git diffstat:

  $ hg diff --stat --git
   c |  Bin 
   d |    0 
   2 files changed, 0 insertions(+), 0 deletions(-)

  $ hg ci -m createb

  >>> open("file with spaces", "wb").write(b"\0") and None
  $ hg add "file with spaces"

Filename with spaces diffstat:

  $ hg diff --stat
   file with spaces |  Bin 
   1 files changed, 0 insertions(+), 0 deletions(-)

Filename with spaces git diffstat:

  $ hg diff --stat --git
   file with spaces |  Bin 
   1 files changed, 0 insertions(+), 0 deletions(-)

Filename without "a/" or "b/" (issue5759):

  $ hg diff --config 'diff.noprefix=1' -c1 --stat --git
   a |  3 +++
   1 files changed, 3 insertions(+), 0 deletions(-)
  $ hg diff --config 'diff.noprefix=1' -c2 --stat --git
   c |  Bin 
   d |    0 
   2 files changed, 0 insertions(+), 0 deletions(-)

  $ hg log --config 'diff.noprefix=1' -r '1:' -p --stat --git
  changeset:   1:3a95b07bb77f
  user:        test
  date:        Thu Jan 01 00:00:00 1970 +0000
  summary:     appenda
  
   a |  3 +++
   1 files changed, 3 insertions(+), 0 deletions(-)
  
  diff --git a a
  --- a
  +++ a
  @@ -211,3 +211,6 @@
   a
   a
   a
  +a
  +a
  +a
  
  changeset:   2:c60a6c753773
  tag:         tip
  user:        test
  date:        Thu Jan 01 00:00:00 1970 +0000
  summary:     createb
  
   c |  Bin 
   d |    0 
   2 files changed, 0 insertions(+), 0 deletions(-)
  
  diff --git c c
  new file mode 100644
  index 0000000000000000000000000000000000000000..f76dd238ade08917e6712764a16a22005a50573d
  GIT binary patch
  literal 1
  Ic${MZ000310RR91
  
  diff --git d d
  new file mode 100644
  

diffstat within directories:

  $ hg rm -f 'file with spaces'

  $ mkdir dir1 dir2
  $ echo new1 > dir1/new
  $ echo new2 > dir2/new
  $ hg add dir1/new dir2/new
  $ hg diff --stat
   dir1/new |  1 +
   dir2/new |  1 +
   2 files changed, 2 insertions(+), 0 deletions(-)

  $ hg diff --stat --root dir1
   new |  1 +
   1 files changed, 1 insertions(+), 0 deletions(-)

  $ hg diff --stat --root dir1 dir2
  warning: dir2 not inside relative root dir1

  $ hg diff --stat --root dir1 -I dir1/old

  $ cd dir1
  $ hg diff --stat .
   dir1/new |  1 +
   1 files changed, 1 insertions(+), 0 deletions(-)
  $ hg diff --stat . --config ui.relative-paths=yes
   new |  1 +
   1 files changed, 1 insertions(+), 0 deletions(-)
  $ hg diff --stat --root .
   new |  1 +
   1 files changed, 1 insertions(+), 0 deletions(-)

  $ hg diff --stat --root . --config ui.relative-paths=yes
   new |  1 +
   1 files changed, 1 insertions(+), 0 deletions(-)
--root trumps ui.relative-paths
  $ hg diff --stat --root .. --config ui.relative-paths=yes
   new         |  1 +
   ../dir2/new |  1 +
   2 files changed, 2 insertions(+), 0 deletions(-)
  $ hg diff --stat --root ../dir1 ../dir2
  warning: ../dir2 not inside relative root .

  $ hg diff --stat --root . -I old

  $ cd ..

Files with lines beginning with '--' or '++' should be properly counted in diffstat

  $ hg up -Cr tip
  0 files updated, 0 files merged, 0 files removed, 0 files unresolved
  $ rm dir1/new
  $ rm dir2/new
  $ rm "file with spaces"
  $ cat > file << EOF
  > line 1
  > line 2
  > line 3
  > EOF
  $ hg commit -Am file
  adding file

Lines added starting with '--' should count as additions
  $ cat > file << EOF
  > line 1
  > -- line 2, with dashes
  > line 3
  > EOF

  $ hg diff --root .
  diff -r be1569354b24 file
  --- a/file	Thu Jan 01 00:00:00 1970 +0000
  +++ b/file	* (glob)
  @@ -1,3 +1,3 @@
   line 1
  -line 2
  +-- line 2, with dashes
   line 3

  $ hg diff --root . --stat
   file |  2 +-
   1 files changed, 1 insertions(+), 1 deletions(-)

Lines changed starting with '--' should count as deletions
  $ hg commit -m filev2
  $ cat > file << EOF
  > line 1
  > -- line 2, with dashes, changed again
  > line 3
  > EOF

  $ hg diff --root .
  diff -r 160f7c034df6 file
  --- a/file	Thu Jan 01 00:00:00 1970 +0000
  +++ b/file	* (glob)
  @@ -1,3 +1,3 @@
   line 1
  --- line 2, with dashes
  +-- line 2, with dashes, changed again
   line 3

  $ hg diff --root . --stat
   file |  2 +-
   1 files changed, 1 insertions(+), 1 deletions(-)

Lines changed starting with '--' should count as deletions
and starting with '++' should count as additions
  $ cat > file << EOF
  > line 1
  > ++ line 2, switched dashes to plusses
  > line 3
  > EOF

  $ hg diff --root .
  diff -r 160f7c034df6 file
  --- a/file	Thu Jan 01 00:00:00 1970 +0000
  +++ b/file	* (glob)
  @@ -1,3 +1,3 @@
   line 1
  --- line 2, with dashes
  +++ line 2, switched dashes to plusses
   line 3

  $ hg diff --root . --stat
   file |  2 +-
   1 files changed, 1 insertions(+), 1 deletions(-)

When a file is renamed, --git shouldn't loss the info about old file
  $ hg init issue6025
  $ cd issue6025
  $ echo > a
  $ hg ci -Am 'add a'
  adding a
  $ hg mv a b
  $ hg diff --git
  diff --git a/a b/b
  rename from a
  rename to b
  $ hg diff --stat
   a |  1 -
   b |  1 +
   2 files changed, 1 insertions(+), 1 deletions(-)
  $ hg diff --stat --git
   a => b |  0 
   1 files changed, 0 insertions(+), 0 deletions(-)
-- filename may contain whitespaces
  $ echo > c
  $ hg ci -Am 'add c'
  adding c
  $ hg mv c 'new c'
  $ hg diff --git
  diff --git a/c b/new c
  rename from c
  rename to new c
  $ hg diff --stat
   c     |  1 -
   new c |  1 +
   2 files changed, 1 insertions(+), 1 deletions(-)
  $ hg diff --stat --git
   c => new c |  0 
   1 files changed, 0 insertions(+), 0 deletions(-)

Make sure `diff --stat -q --config diff.git-0` shows stat (issue4037)

  $ hg status
  A new c
  R c
  $ hg diff --stat -q
   c     |  1 -
   new c |  1 +
   2 files changed, 1 insertions(+), 1 deletions(-)