Mercurial > hg
view tests/test-exchange-obsmarkers-case-A3.t @ 48598:a6f16ec07ed7
stream-clone: add a explicit test for format change during stream clone
They are different kind of requirements, the one which impact the data storage
and are relevant to the files being streamed and the one which does not. For
example some requirements are only relevant to the working copy, like sparse, or
dirstate-v2.
Since they are irrelevant to the content being streamed, they do not prevent the
receiving side to use streaming clone and mercurial skip adverting them over
the wire and, ideally, within the bundle.
In addition, this let the client decide to use whichever format it desire for
the part that does not affect the store itself. So the configuration related to
these format are used as normal when doing a streaming clone.
In practice, the feature was not really tested and is badly broken with bundle-2,
since the requirements are not filtered out from the stream bundle.
So we start with adding simple tests as a good base before the fix and adjust
the feature.
Differential Revision: https://phab.mercurial-scm.org/D12029
author | Pierre-Yves David <pierre-yves.david@octobus.net> |
---|---|
date | Mon, 17 Jan 2022 18:51:47 +0100 |
parents | 9261f6c1d39b |
children |
line wrap: on
line source
============================================ Testing obsolescence markers push: Cases A.3 ============================================ Mercurial pushes obsolescences markers relevant to the "pushed-set", the set of all changesets that requested to be "in sync" after the push (even if they are already on both side). This test belongs to a series of tests checking such set is properly computed and applied. This does not tests "obsmarkers" discovery capabilities. Category A: simple cases TestCase 3: old branch split in two, only one of the new one pushed Variants: # a: changesets are known on remote # b: changesets are known on remote (push needs -f) A.3 new branchs created, one pushed. ==================================== .. {{{ .. B' ○⇢ø B .. | | .. \Aø⇠◔ A' .. \|/ .. ● O .. }}} .. .. Markers exist from: .. .. * `A ø⇠○ A'` .. * `B ø⇠○ B'` .. .. Command runs: .. .. * hg push -r A .. .. Expected exchange: .. .. * chain from A .. .. Expected exclude: .. .. * chain from B .. .. Extra note: .. .. If A and B are remontly known, we should expect: .. .. * `hg push` will complain about the new head .. * `hg push` should complain about unstable history creation Setup ----- $ . $TESTDIR/testlib/exchange-obsmarker-util.sh initial $ setuprepos A.3.a creating test repo for test case A.3.a - pulldest - main - pushdest cd into `main` and proceed with env setup $ cd main $ mkcommit A0 $ mkcommit B0 $ hg update -q 0 $ mkcommit A1 created new head $ hg update -q 0 $ mkcommit B1 created new head $ hg debugobsolete `getid 'desc(A0)'` `getid 'desc(A1)'` 1 new obsolescence markers obsoleted 1 changesets 1 new orphan changesets $ hg debugobsolete `getid 'desc(B0)'` `getid 'desc(B1)'` 1 new obsolescence markers obsoleted 1 changesets $ hg log -G --hidden @ f6298a8ac3a4 (draft): B1 | | o e5ea8f9c7314 (draft): A1 |/ | x 6e72f0a95b5e (draft): B0 | | | x 28b51eb45704 (draft): A0 |/ o a9bdc8b26820 (public): O $ inspect_obsmarkers obsstore content ================ 28b51eb45704506b5c603decd6bf7ac5e0f6a52f e5ea8f9c73143125d36658e90ef70c6d2027a5b7 0 (Thu Jan 01 00:00:00 1970 +0000) {'user': 'test'} 6e72f0a95b5e01a7504743aa941f69cb1fbef8b0 f6298a8ac3a4b78bbeae5f1d3dc5bc3c3812f0f3 0 (Thu Jan 01 00:00:00 1970 +0000) {'user': 'test'} $ cd .. $ cd .. Actual Test for first version (changeset unknown in remote) ----------------------------------------------------------- $ dotest A.3.a A1 ## Running testcase A.3.a # testing echange of "A1" (e5ea8f9c7314) ## initial state # obstore: main 28b51eb45704506b5c603decd6bf7ac5e0f6a52f e5ea8f9c73143125d36658e90ef70c6d2027a5b7 0 (Thu Jan 01 00:00:00 1970 +0000) {'user': 'test'} 6e72f0a95b5e01a7504743aa941f69cb1fbef8b0 f6298a8ac3a4b78bbeae5f1d3dc5bc3c3812f0f3 0 (Thu Jan 01 00:00:00 1970 +0000) {'user': 'test'} # obstore: pushdest # obstore: pulldest ## pushing "A1" from main to pushdest pushing to pushdest searching for changes remote: adding changesets remote: adding manifests remote: adding file changes remote: added 1 changesets with 1 changes to 1 files remote: 1 new obsolescence markers ## post push state # obstore: main 28b51eb45704506b5c603decd6bf7ac5e0f6a52f e5ea8f9c73143125d36658e90ef70c6d2027a5b7 0 (Thu Jan 01 00:00:00 1970 +0000) {'user': 'test'} 6e72f0a95b5e01a7504743aa941f69cb1fbef8b0 f6298a8ac3a4b78bbeae5f1d3dc5bc3c3812f0f3 0 (Thu Jan 01 00:00:00 1970 +0000) {'user': 'test'} # obstore: pushdest 28b51eb45704506b5c603decd6bf7ac5e0f6a52f e5ea8f9c73143125d36658e90ef70c6d2027a5b7 0 (Thu Jan 01 00:00:00 1970 +0000) {'user': 'test'} # obstore: pulldest ## pulling "e5ea8f9c7314" from main into pulldest pulling from main searching for changes adding changesets adding manifests adding file changes added 1 changesets with 1 changes to 1 files 1 new obsolescence markers new changesets e5ea8f9c7314 (1 drafts) (run 'hg update' to get a working copy) ## post pull state # obstore: main 28b51eb45704506b5c603decd6bf7ac5e0f6a52f e5ea8f9c73143125d36658e90ef70c6d2027a5b7 0 (Thu Jan 01 00:00:00 1970 +0000) {'user': 'test'} 6e72f0a95b5e01a7504743aa941f69cb1fbef8b0 f6298a8ac3a4b78bbeae5f1d3dc5bc3c3812f0f3 0 (Thu Jan 01 00:00:00 1970 +0000) {'user': 'test'} # obstore: pushdest 28b51eb45704506b5c603decd6bf7ac5e0f6a52f e5ea8f9c73143125d36658e90ef70c6d2027a5b7 0 (Thu Jan 01 00:00:00 1970 +0000) {'user': 'test'} # obstore: pulldest 28b51eb45704506b5c603decd6bf7ac5e0f6a52f e5ea8f9c73143125d36658e90ef70c6d2027a5b7 0 (Thu Jan 01 00:00:00 1970 +0000) {'user': 'test'} other variant: changeset known in remote ---------------------------------------- $ setuprepos A.3.b creating test repo for test case A.3.b - pulldest - main - pushdest cd into `main` and proceed with env setup $ cd main $ mkcommit A0 $ mkcommit B0 $ hg push -q ../pushdest $ hg push -q ../pulldest $ hg update -q 0 $ mkcommit A1 created new head $ hg update -q 0 $ mkcommit B1 created new head $ hg debugobsolete `getid 'desc(A0)'` `getid 'desc(A1)'` 1 new obsolescence markers obsoleted 1 changesets 1 new orphan changesets $ hg debugobsolete `getid 'desc(B0)'` `getid 'desc(B1)'` 1 new obsolescence markers obsoleted 1 changesets $ hg log -G --hidden @ f6298a8ac3a4 (draft): B1 | | o e5ea8f9c7314 (draft): A1 |/ | x 6e72f0a95b5e (draft): B0 | | | x 28b51eb45704 (draft): A0 |/ o a9bdc8b26820 (public): O $ inspect_obsmarkers obsstore content ================ 28b51eb45704506b5c603decd6bf7ac5e0f6a52f e5ea8f9c73143125d36658e90ef70c6d2027a5b7 0 (Thu Jan 01 00:00:00 1970 +0000) {'user': 'test'} 6e72f0a95b5e01a7504743aa941f69cb1fbef8b0 f6298a8ac3a4b78bbeae5f1d3dc5bc3c3812f0f3 0 (Thu Jan 01 00:00:00 1970 +0000) {'user': 'test'} $ cd .. $ cd .. Actual Test for first version (changeset known in remote) ----------------------------------------------------------- check it complains about multiple heads $ cd A.3.b $ hg push -R main -r 'desc(A1)' pushdest pushing to pushdest searching for changes abort: push creates new remote head e5ea8f9c7314 (merge or see 'hg help push' for details about pushing new heads) [20] $ cd .. test obsmarkers exchange. $ dotest A.3.b A1 -f ## Running testcase A.3.b # testing echange of "A1" (e5ea8f9c7314) ## initial state # obstore: main 28b51eb45704506b5c603decd6bf7ac5e0f6a52f e5ea8f9c73143125d36658e90ef70c6d2027a5b7 0 (Thu Jan 01 00:00:00 1970 +0000) {'user': 'test'} 6e72f0a95b5e01a7504743aa941f69cb1fbef8b0 f6298a8ac3a4b78bbeae5f1d3dc5bc3c3812f0f3 0 (Thu Jan 01 00:00:00 1970 +0000) {'user': 'test'} # obstore: pushdest # obstore: pulldest ## pushing "A1" from main to pushdest pushing to pushdest searching for changes remote: adding changesets remote: adding manifests remote: adding file changes remote: added 1 changesets with 1 changes to 1 files (+1 heads) remote: 1 new obsolescence markers remote: obsoleted 1 changesets remote: 1 new orphan changesets ## post push state # obstore: main 28b51eb45704506b5c603decd6bf7ac5e0f6a52f e5ea8f9c73143125d36658e90ef70c6d2027a5b7 0 (Thu Jan 01 00:00:00 1970 +0000) {'user': 'test'} 6e72f0a95b5e01a7504743aa941f69cb1fbef8b0 f6298a8ac3a4b78bbeae5f1d3dc5bc3c3812f0f3 0 (Thu Jan 01 00:00:00 1970 +0000) {'user': 'test'} # obstore: pushdest 28b51eb45704506b5c603decd6bf7ac5e0f6a52f e5ea8f9c73143125d36658e90ef70c6d2027a5b7 0 (Thu Jan 01 00:00:00 1970 +0000) {'user': 'test'} # obstore: pulldest ## pulling "e5ea8f9c7314" from main into pulldest pulling from main searching for changes adding changesets adding manifests adding file changes added 1 changesets with 1 changes to 1 files (+1 heads) 1 new obsolescence markers obsoleted 1 changesets 1 new orphan changesets new changesets e5ea8f9c7314 (1 drafts) (run 'hg heads' to see heads, 'hg merge' to merge) ## post pull state # obstore: main 28b51eb45704506b5c603decd6bf7ac5e0f6a52f e5ea8f9c73143125d36658e90ef70c6d2027a5b7 0 (Thu Jan 01 00:00:00 1970 +0000) {'user': 'test'} 6e72f0a95b5e01a7504743aa941f69cb1fbef8b0 f6298a8ac3a4b78bbeae5f1d3dc5bc3c3812f0f3 0 (Thu Jan 01 00:00:00 1970 +0000) {'user': 'test'} # obstore: pushdest 28b51eb45704506b5c603decd6bf7ac5e0f6a52f e5ea8f9c73143125d36658e90ef70c6d2027a5b7 0 (Thu Jan 01 00:00:00 1970 +0000) {'user': 'test'} # obstore: pulldest 28b51eb45704506b5c603decd6bf7ac5e0f6a52f e5ea8f9c73143125d36658e90ef70c6d2027a5b7 0 (Thu Jan 01 00:00:00 1970 +0000) {'user': 'test'}