view tests/test-pull-update.t @ 48598:a6f16ec07ed7

stream-clone: add a explicit test for format change during stream clone

They are different kind of requirements, the one which impact the data storage
and are relevant to the files being streamed and the one which does not. For
example some requirements are only relevant to the working copy, like sparse, or
dirstate-v2.

Since they are irrelevant to the content being streamed, they do not prevent the
receiving side to use streaming clone and mercurial skip adverting them over
the wire and, ideally, within the bundle.

In addition, this let the client decide to use whichever format it desire for
the part that does not affect the store itself. So the configuration related to
these format are used as normal when doing a streaming clone.

In practice, the feature was not really tested and is badly broken with bundle-2,
since the requirements are not filtered out from the stream bundle.

So we start with adding simple tests as a good base before the fix and adjust
the feature.

Differential Revision: https://phab.mercurial-scm.org/D12029

  $ hg init t
  $ cd t
  $ echo 1 > foo
  $ hg ci -Am m
  adding foo

  $ cd ..
  $ hg clone t tt
  updating to branch default
  1 files updated, 0 files merged, 0 files removed, 0 files unresolved
  $ cd tt
  $ echo 1.1 > foo
  $ hg ci -Am m

  $ cd ../t
  $ echo 1.2 > foo
  $ hg ci -Am m

Should respect config to disable dirty update
  $ hg co -qC 0
  $ echo 2 > foo
  $ hg --config commands.update.check=abort pull -u ../tt
  pulling from ../tt
  searching for changes
  adding changesets
  adding manifests
  adding file changes
  added 1 changesets with 1 changes to 1 files (+1 heads)
  new changesets 107cefe13e42
  1 local changesets published
  abort: uncommitted changes
  [20]
  $ hg --config extensions.strip= strip --no-backup tip
  $ hg co -qC tip

Should not update to the other topological branch:

  $ hg pull -u ../tt
  pulling from ../tt
  searching for changes
  adding changesets
  adding manifests
  adding file changes
  added 1 changesets with 1 changes to 1 files (+1 heads)
  new changesets 107cefe13e42
  0 files updated, 0 files merged, 0 files removed, 0 files unresolved
  updated to "800c91d5bfc1: m"
  1 other heads for branch "default"

  $ cd ../tt

Should not update to the other branch:

  $ hg pull -u ../t
  pulling from ../t
  searching for changes
  adding changesets
  adding manifests
  adding file changes
  added 1 changesets with 1 changes to 1 files (+1 heads)
  new changesets 800c91d5bfc1
  1 local changesets published
  0 files updated, 0 files merged, 0 files removed, 0 files unresolved
  updated to "107cefe13e42: m"
  1 other heads for branch "default"

  $ HGMERGE=true hg merge
  merging foo
  0 files updated, 1 files merged, 0 files removed, 0 files unresolved
  (branch merge, don't forget to commit)
  $ hg ci -mm

  $ cd ../t

Should work:

  $ hg pull -u ../tt
  pulling from ../tt
  searching for changes
  adding changesets
  adding manifests
  adding file changes
  added 1 changesets with 1 changes to 1 files (-1 heads)
  new changesets 483b76ad4309
  1 local changesets published
  1 files updated, 0 files merged, 0 files removed, 0 files unresolved

Similarity between "hg update" and "hg pull -u" in handling bookmark
====================================================================

Test that updating activates the bookmark, which matches with the
explicit destination of the update.

  $ echo 4 >> foo
  $ hg commit -m "#4"
  $ hg bookmark active-after-pull
  $ cd ../tt

(1) activating by --rev BOOKMARK

  $ hg bookmark -f active-before-pull
  $ hg bookmarks
   * active-before-pull        3:483b76ad4309

  $ hg pull -u -r active-after-pull
  pulling from $TESTTMP/t
  searching for changes
  adding changesets
  adding manifests
  adding file changes
  adding remote bookmark active-after-pull
  added 1 changesets with 1 changes to 1 files
  new changesets f815b3da6163
  1 local changesets published
  1 files updated, 0 files merged, 0 files removed, 0 files unresolved
  (activating bookmark active-after-pull)

  $ hg parents -q
  4:f815b3da6163
  $ hg bookmarks
   * active-after-pull         4:f815b3da6163
     active-before-pull        3:483b76ad4309

(discard pulled changes)

  $ hg update -q 483b76ad4309
  $ hg rollback -q

(2) activating by URL#BOOKMARK

  $ hg bookmark -f active-before-pull
  $ hg bookmarks
   * active-before-pull        3:483b76ad4309

  $ hg pull -u $TESTTMP/t#active-after-pull
  pulling from $TESTTMP/t
  searching for changes
  adding changesets
  adding manifests
  adding file changes
  adding remote bookmark active-after-pull
  added 1 changesets with 1 changes to 1 files
  new changesets f815b3da6163
  1 local changesets published
  1 files updated, 0 files merged, 0 files removed, 0 files unresolved
  (activating bookmark active-after-pull)

  $ hg parents -q
  4:f815b3da6163
  $ hg bookmarks
   * active-after-pull         4:f815b3da6163
     active-before-pull        3:483b76ad4309

(discard pulled changes)

  $ hg update -q 483b76ad4309
  $ hg rollback -q

Test that updating deactivates current active bookmark, if the
destination of the update is explicitly specified, and it doesn't
match with the name of any existing bookmarks.

  $ cd ../t
  $ hg bookmark -d active-after-pull
  $ hg branch bar -q
  $ hg commit -m "#5 (bar #1)"
  $ cd ../tt

(1) deactivating by --rev REV

  $ hg bookmark -f active-before-pull
  $ hg bookmarks
   * active-before-pull        3:483b76ad4309

  $ hg pull -u -r b5e4babfaaa7
  pulling from $TESTTMP/t
  searching for changes
  adding changesets
  adding manifests
  adding file changes
  added 2 changesets with 1 changes to 1 files
  new changesets f815b3da6163:b5e4babfaaa7
  1 local changesets published
  1 files updated, 0 files merged, 0 files removed, 0 files unresolved
  (leaving bookmark active-before-pull)

  $ hg parents -q
  5:b5e4babfaaa7
  $ hg bookmarks
     active-before-pull        3:483b76ad4309

(discard pulled changes)

  $ hg update -q 483b76ad4309
  $ hg rollback -q

(2) deactivating by --branch BRANCH

  $ hg bookmark -f active-before-pull
  $ hg bookmarks
   * active-before-pull        3:483b76ad4309

  $ hg pull -u -b bar
  pulling from $TESTTMP/t
  searching for changes
  adding changesets
  adding manifests
  adding file changes
  added 2 changesets with 1 changes to 1 files
  new changesets f815b3da6163:b5e4babfaaa7
  1 local changesets published
  1 files updated, 0 files merged, 0 files removed, 0 files unresolved
  (leaving bookmark active-before-pull)

  $ hg parents -q
  5:b5e4babfaaa7
  $ hg bookmarks
     active-before-pull        3:483b76ad4309

(discard pulled changes)

  $ hg update -q 483b76ad4309
  $ hg rollback -q

(3) deactivating by URL#ANOTHER-BRANCH

  $ hg bookmark -f active-before-pull
  $ hg bookmarks
   * active-before-pull        3:483b76ad4309

  $ hg pull -u $TESTTMP/t#bar
  pulling from $TESTTMP/t
  searching for changes
  adding changesets
  adding manifests
  adding file changes
  added 2 changesets with 1 changes to 1 files
  new changesets f815b3da6163:b5e4babfaaa7
  1 local changesets published
  1 files updated, 0 files merged, 0 files removed, 0 files unresolved
  (leaving bookmark active-before-pull)

  $ hg parents -q
  5:b5e4babfaaa7
  $ hg bookmarks
     active-before-pull        3:483b76ad4309

  $ cd ..

Issue622: hg init && hg pull -u URL doesn't checkout default branch

  $ hg init test
  $ cd test
  $ echo foo>foo
  $ hg addremove
  adding foo
  $ hg commit -m 1
  $ cd ..

  $ hg init empty
  $ cd empty
  $ hg pull -u ../test
  pulling from ../test
  requesting all changes
  adding changesets
  adding manifests
  adding file changes
  added 1 changesets with 1 changes to 1 files
  new changesets 340e38bdcde4
  1 files updated, 0 files merged, 0 files removed, 0 files unresolved