view tests/test-state-extension.t @ 48598:a6f16ec07ed7

stream-clone: add a explicit test for format change during stream clone

They are different kind of requirements, the one which impact the data storage
and are relevant to the files being streamed and the one which does not. For
example some requirements are only relevant to the working copy, like sparse, or
dirstate-v2.

Since they are irrelevant to the content being streamed, they do not prevent the
receiving side to use streaming clone and mercurial skip adverting them over
the wire and, ideally, within the bundle.

In addition, this let the client decide to use whichever format it desire for
the part that does not affect the store itself. So the configuration related to
these format are used as normal when doing a streaming clone.

In practice, the feature was not really tested and is badly broken with bundle-2,
since the requirements are not filtered out from the stream bundle.

So we start with adding simple tests as a good base before the fix and adjust
the feature.

Differential Revision: https://phab.mercurial-scm.org/D12029

Test extension of unfinished states support.
  $ mkdir chainify
  $ cd chainify
  $ cat >> chainify.py <<EOF
  > from mercurial import cmdutil, error, extensions, exthelper, node, scmutil, state
  > from hgext import rebase
  > 
  > eh = exthelper.exthelper()
  > 
  > extsetup = eh.finalextsetup
  > cmdtable = eh.cmdtable
  > 
  > # Rebase calls addunfinished in uisetup, so we have to call it in extsetup.
  > # Ideally there'd by an 'extensions.afteruisetup()' just like
  > # 'extensions.afterloaded()' to allow nesting multiple commands.
  > @eh.extsetup
  > def _extsetup(ui):
  >     state.addunfinished(
  >         b'chainify',
  >         b'chainify.state',
  >         continueflag=True,
  >         childopnames=[b'rebase'])
  > 
  > def _node(repo, arg):
  >     return node.hex(scmutil.revsingle(repo, arg).node())
  > 
  > @eh.command(
  >     b'chainify',
  >     [(b'r', b'revs', [], b'revs to chain', b'REV'),
  >      (b'', b'continue', False, b'continue op')],
  >     b'chainify [-r REV] +',
  >     inferrepo=True)
  > def chainify(ui, repo, **opts):
  >     """Rebases r1, r2, r3, etc. into a chain."""
  >     with repo.wlock(), repo.lock():
  >         cmdstate = state.cmdstate(repo, b'chainify.state')
  >         if opts['continue']:
  >             if not cmdstate.exists():
  >                 raise error.Abort(b'no chainify in progress')
  >         else:
  >             cmdutil.checkunfinished(repo)
  >             data = {
  >                 b'tip': _node(repo, opts['revs'][0]),
  >                 b'revs': b','.join(_node(repo, r) for r in opts['revs'][1:]),
  >             }
  >             cmdstate.save(1, data)
  > 
  >         data = cmdstate.read()
  >         while data[b'revs']:
  >             tip = data[b'tip']
  >             revs = data[b'revs'].split(b',')
  >             with state.delegating(repo, b'chainify', b'rebase'):
  >                 ui.status(b'rebasing %s onto %s\n' % (revs[0][:12], tip[:12]))
  >                 if state.ischildunfinished(repo, b'chainify', b'rebase'):
  >                     rc = state.continuechild(ui, repo, b'chainify', b'rebase')
  >                 else:
  >                     rc = rebase.rebase(ui, repo, rev=[revs[0]], dest=tip)
  >                 if rc and rc != 0:
  >                     raise error.Abort(b'rebase failed (rc: %d)' % rc)
  >             data[b'tip'] = _node(repo, b'tip')
  >             data[b'revs'] = b','.join(revs[1:])
  >             cmdstate.save(1, data)
  >         cmdstate.delete()
  >         ui.status(b'done chainifying\n')
  > EOF

  $ chainifypath=`pwd`/chainify.py
  $ echo '[extensions]' >> $HGRCPATH
  $ echo "chainify = $chainifypath" >> $HGRCPATH
  $ echo "rebase =" >> $HGRCPATH

  $ cd $TESTTMP
  $ hg init a
  $ cd a
  $ echo base > base.txt
  $ hg commit -Aqm 'base commit'
  $ echo foo > file1
  $ hg commit -Aqm 'add file'
  $ hg co -q ".^"
  $ echo bar > file2
  $ hg commit -Aqm 'add other file'
  $ hg co -q ".^"
  $ echo foo2 > file1
  $ hg commit -Aqm 'add conflicting file'
  $ hg co -q ".^"
  $ hg log --graph --template '{rev} {files}'
  o  3 file1
  |
  | o  2 file2
  |/
  | o  1 file1
  |/
  @  0 base.txt
  
  $ hg chainify -r 8430cfdf77c2 -r f8596309dff8 -r a858b338b3e9
  rebasing f8596309dff8 onto 8430cfdf77c2
  rebasing 2:f8596309dff8 "add other file"
  saved backup bundle to $TESTTMP/* (glob)
  rebasing a858b338b3e9 onto 83c722183a8e
  rebasing 2:a858b338b3e9 "add conflicting file"
  merging file1
  warning: conflicts while merging file1! (edit, then use 'hg resolve --mark')
  unresolved conflicts (see 'hg resolve', then 'hg chainify --continue')
  [240]
  $ hg status --config commands.status.verbose=True
  M file1
  ? file1.orig
  # The repository is in an unfinished *chainify* state.
  
  # Unresolved merge conflicts:
  # 
  #     file1
  # 
  # To mark files as resolved:  hg resolve --mark FILE
  
  # To continue:    hg chainify --continue
  # To abort:       hg chainify --abort
  
  $ echo foo3 > file1
  $ hg resolve --mark file1
  (no more unresolved files)
  continue: hg chainify --continue
  $ hg chainify --continue
  rebasing a858b338b3e9 onto 83c722183a8e
  rebasing 2:a858b338b3e9 "add conflicting file"
  saved backup bundle to $TESTTMP/* (glob)
  done chainifying
  $ hg log --graph --template '{rev} {files}'
  o  3 file1
  |
  o  2 file2
  |
  o  1 file1
  |
  @  0 base.txt