view tests/test-treediscovery-legacy.t @ 48598:a6f16ec07ed7

stream-clone: add a explicit test for format change during stream clone

They are different kind of requirements, the one which impact the data storage
and are relevant to the files being streamed and the one which does not. For
example some requirements are only relevant to the working copy, like sparse, or
dirstate-v2.

Since they are irrelevant to the content being streamed, they do not prevent the
receiving side to use streaming clone and mercurial skip adverting them over
the wire and, ideally, within the bundle.

In addition, this let the client decide to use whichever format it desire for
the part that does not affect the store itself. So the configuration related to
these format are used as normal when doing a streaming clone.

In practice, the feature was not really tested and is badly broken with bundle-2,
since the requirements are not filtered out from the stream bundle.

So we start with adding simple tests as a good base before the fix and adjust
the feature.

Differential Revision: https://phab.mercurial-scm.org/D12029

Tests discovery against servers without getbundle support:

  $ cat >> $HGRCPATH <<EOF
  > [ui]
  > logtemplate="{rev} {node|short}: {desc} {branches}\n"
  > EOF
  $ cp $HGRCPATH $HGRCPATH-withcap

  $ CAP="getbundle known changegroupsubset bundle2"
  $ . "$TESTDIR/notcapable"
  $ cp $HGRCPATH $HGRCPATH-nocap
  $ cp $HGRCPATH-withcap $HGRCPATH

Prep for test server without branchmap support

  $ CAP="branchmap"
  $ . "$TESTDIR/notcapable"
  $ cp $HGRCPATH $HGRCPATH-nocap-branchmap
  $ cp $HGRCPATH-withcap $HGRCPATH

Setup HTTP server control:

  $ remote=http://localhost:$HGPORT/
  $ export remote
  $ tstart() {
  >   echo '[web]' > $1/.hg/hgrc
  >   echo 'push_ssl = false' >> $1/.hg/hgrc
  >   echo 'allow_push = *' >> $1/.hg/hgrc
  >   cp $HGRCPATH-nocap $HGRCPATH
  >   hg serve -R $1 -p $HGPORT -d --pid-file=hg.pid -E errors.log
  >   cat hg.pid >> $DAEMON_PIDS
  > }
  $ tstop() {
  >   killdaemons.py
  >   cp $HGRCPATH-withcap $HGRCPATH
  > }

Both are empty:

  $ hg init empty1
  $ hg init empty2
  $ tstart empty2
  $ hg incoming -R empty1 $remote
  comparing with http://localhost:$HGPORT/
  no changes found
  [1]
  $ hg outgoing -R empty1 $remote
  comparing with http://localhost:$HGPORT/
  no changes found
  [1]
  $ hg pull -R empty1 $remote
  pulling from http://localhost:$HGPORT/
  no changes found
  $ hg push -R empty1 $remote
  pushing to http://localhost:$HGPORT/
  no changes found
  [1]
  $ tstop

Base repo:

  $ hg init main
  $ cd main
  $ hg debugbuilddag -mo '+2:tbase @name1 +3:thead1 <tbase @name2 +4:thead2 @both /thead1 +2:tmaintip'
  $ hg log -G
  o  11 a19bfa7e7328: r11 both
  |
  o  10 8b6bad1512e1: r10 both
  |
  o    9 025829e08038: r9 both
  |\
  | o  8 d8f638ac69e9: r8 name2
  | |
  | o  7 b6b4d315a2ac: r7 name2
  | |
  | o  6 6c6f5d5f3c11: r6 name2
  | |
  | o  5 70314b29987d: r5 name2
  | |
  o |  4 e71dbbc70e03: r4 name1
  | |
  o |  3 2c8d5d5ec612: r3 name1
  | |
  o |  2 a7892891da29: r2 name1
  |/
  o  1 0019a3b924fd: r1
  |
  o  0 d57206cc072a: r0
  
  $ cd ..
  $ tstart main

Full clone:

  $ hg clone main full
  updating to branch default
  2 files updated, 0 files merged, 0 files removed, 0 files unresolved
  $ cd full
  $ hg incoming $remote
  comparing with http://localhost:$HGPORT/
  searching for changes
  no changes found
  [1]
  $ hg outgoing $remote
  comparing with http://localhost:$HGPORT/
  searching for changes
  no changes found
  [1]
  $ hg pull $remote
  pulling from http://localhost:$HGPORT/
  searching for changes
  no changes found
  $ hg push $remote
  pushing to http://localhost:$HGPORT/
  searching for changes
  no changes found
  [1]
  $ cd ..

Local is empty:

  $ cd empty1
  $ hg incoming $remote --rev name1
  comparing with http://localhost:$HGPORT/
  abort: cannot look up remote changes; remote repository does not support the 'changegroupsubset' capability
  [255]
  $ hg incoming $remote
  comparing with http://localhost:$HGPORT/
  0 d57206cc072a: r0 
  1 0019a3b924fd: r1 
  2 a7892891da29: r2 name1
  3 2c8d5d5ec612: r3 name1
  4 e71dbbc70e03: r4 name1
  5 70314b29987d: r5 name2
  6 6c6f5d5f3c11: r6 name2
  7 b6b4d315a2ac: r7 name2
  8 d8f638ac69e9: r8 name2
  9 025829e08038: r9 both
  10 8b6bad1512e1: r10 both
  11 a19bfa7e7328: r11 both
  $ hg outgoing $remote
  comparing with http://localhost:$HGPORT/
  no changes found
  [1]
  $ hg push $remote
  pushing to http://localhost:$HGPORT/
  no changes found
  [1]
  $ hg pull $remote
  pulling from http://localhost:$HGPORT/
  requesting all changes
  adding changesets
  adding manifests
  adding file changes
  added 12 changesets with 24 changes to 2 files
  new changesets d57206cc072a:a19bfa7e7328
  (run 'hg update' to get a working copy)
  $ hg incoming $remote
  comparing with http://localhost:$HGPORT/
  searching for changes
  no changes found
  [1]
  $ cd ..

Local is subset:

  $ cp $HGRCPATH-withcap $HGRCPATH
  $ hg clone main subset --rev name2 ; cd subset
  adding changesets
  adding manifests
  adding file changes
  added 6 changesets with 12 changes to 2 files
  new changesets d57206cc072a:d8f638ac69e9
  updating to branch name2
  2 files updated, 0 files merged, 0 files removed, 0 files unresolved
  $ cp $HGRCPATH-nocap $HGRCPATH
  $ hg incoming $remote
  comparing with http://localhost:$HGPORT/
  searching for changes
  6 a7892891da29: r2 name1
  7 2c8d5d5ec612: r3 name1
  8 e71dbbc70e03: r4 name1
  9 025829e08038: r9 both
  10 8b6bad1512e1: r10 both
  11 a19bfa7e7328: r11 both
  $ hg outgoing $remote
  comparing with http://localhost:$HGPORT/
  searching for changes
  no changes found
  [1]
  $ hg push $remote
  pushing to http://localhost:$HGPORT/
  searching for changes
  no changes found
  [1]
  $ hg pull $remote
  pulling from http://localhost:$HGPORT/
  searching for changes
  adding changesets
  adding manifests
  adding file changes
  added 6 changesets with 12 changes to 2 files
  new changesets a7892891da29:a19bfa7e7328
  (run 'hg update' to get a working copy)
  $ hg incoming $remote
  comparing with http://localhost:$HGPORT/
  searching for changes
  no changes found
  [1]
  $ cd ..

Remote is empty:

  $ tstop ; tstart empty2
  $ cd main
  $ hg incoming $remote
  comparing with http://localhost:$HGPORT/
  searching for changes
  no changes found
  [1]
  $ hg outgoing $remote
  comparing with http://localhost:$HGPORT/
  searching for changes
  0 d57206cc072a: r0 
  1 0019a3b924fd: r1 
  2 a7892891da29: r2 name1
  3 2c8d5d5ec612: r3 name1
  4 e71dbbc70e03: r4 name1
  5 70314b29987d: r5 name2
  6 6c6f5d5f3c11: r6 name2
  7 b6b4d315a2ac: r7 name2
  8 d8f638ac69e9: r8 name2
  9 025829e08038: r9 both
  10 8b6bad1512e1: r10 both
  11 a19bfa7e7328: r11 both
  $ hg pull $remote
  pulling from http://localhost:$HGPORT/
  searching for changes
  no changes found
  $ hg push $remote
  pushing to http://localhost:$HGPORT/
  searching for changes
  remote: adding changesets
  remote: adding manifests
  remote: adding file changes
  remote: added 12 changesets with 24 changes to 2 files
  $ hg outgoing $remote
  comparing with http://localhost:$HGPORT/
  searching for changes
  no changes found
  [1]
  $ cd ..

Local is superset:

  $ tstop
  $ hg clone main subset2 --rev name2
  adding changesets
  adding manifests
  adding file changes
  added 6 changesets with 12 changes to 2 files
  new changesets d57206cc072a:d8f638ac69e9
  updating to branch name2
  2 files updated, 0 files merged, 0 files removed, 0 files unresolved
  $ tstart subset2
  $ cd main
  $ hg incoming $remote
  comparing with http://localhost:$HGPORT/
  searching for changes
  no changes found
  [1]
  $ hg outgoing $remote
  comparing with http://localhost:$HGPORT/
  searching for changes
  2 a7892891da29: r2 name1
  3 2c8d5d5ec612: r3 name1
  4 e71dbbc70e03: r4 name1
  9 025829e08038: r9 both
  10 8b6bad1512e1: r10 both
  11 a19bfa7e7328: r11 both
  $ hg pull $remote
  pulling from http://localhost:$HGPORT/
  searching for changes
  no changes found
  $ hg push $remote
  pushing to http://localhost:$HGPORT/
  searching for changes
  abort: push creates new remote branches: both, name1
  (use 'hg push --new-branch' to create new remote branches)
  [20]
  $ hg push $remote --new-branch
  pushing to http://localhost:$HGPORT/
  searching for changes
  remote: adding changesets
  remote: adding manifests
  remote: adding file changes
  remote: added 6 changesets with 12 changes to 2 files
  $ hg outgoing $remote
  comparing with http://localhost:$HGPORT/
  searching for changes
  no changes found
  [1]
  $ cd ..

Partial pull:

  $ tstop ; tstart main
  $ hg clone $remote partial --rev name2
  abort: partial pull cannot be done because other repository doesn't support changegroupsubset.
  [255]
  $ hg init partial; cd partial
  $ hg incoming $remote --rev name2
  comparing with http://localhost:$HGPORT/
  abort: cannot look up remote changes; remote repository does not support the 'changegroupsubset' capability
  [255]
  $ hg pull $remote --rev name2
  pulling from http://localhost:$HGPORT/
  abort: partial pull cannot be done because other repository doesn't support changegroupsubset.
  [255]
  $ cd ..

  $ tstop

Exercise pushing to server without branchmap capability

  $ cp $HGRCPATH-nocap-branchmap $HGRCPATH-nocap
  $ hg init rlocal
  $ cd rlocal
  $ echo A > A
  $ hg ci -Am A
  adding A
  $ cd ..
  $ hg clone rlocal rremote
  updating to branch default
  1 files updated, 0 files merged, 0 files removed, 0 files unresolved
  $ cd rlocal
  $ echo B > B
  $ hg ci -Am B
  adding B
  $ cd ..
  $ tstart rremote

  $ cd rlocal
  $ hg incoming $remote
  comparing with http://localhost:$HGPORT/
  searching for changes
  no changes found
  [1]
  $ hg outgoing $remote
  comparing with http://localhost:$HGPORT/
  searching for changes
  1 27547f69f254: B 
  $ hg pull $remote
  pulling from http://localhost:$HGPORT/
  searching for changes
  no changes found
  1 local changesets published
  $ hg push $remote
  pushing to http://localhost:$HGPORT/
  searching for changes
  remote: adding changesets
  remote: adding manifests
  remote: adding file changes
  remote: added 1 changesets with 1 changes to 1 files
  $ hg outgoing $remote
  comparing with http://localhost:$HGPORT/
  searching for changes
  no changes found
  [1]
  $ cd ..

  $ tstop