completion: selectively use debugpathcomplete in bash_completion
The current bash_completion code can be very slow in a large working
directory. It always uses "hg status" to generate possibly matching
files, which checks the status of every file. We often don't care
about status when completing, so that cost is very high.
As the new debugpathcomplete command does not check the status of
files, it offers much better performance for commands that only
care about completing names.
test for old histedit issue #6:
editing a changeset without any actual change would corrupt the repository
$ . "$TESTDIR/histedit-helpers.sh"
$ cat >> $HGRCPATH <<EOF
> [extensions]
> graphlog=
> histedit=
> EOF
$ initrepo ()
> {
> dir="$1"
> comment="$2"
> if [ -n "${comment}" ]; then
> echo % ${comment}
> echo % ${comment} | sed 's:.:-:g'
> fi
> hg init ${dir}
> cd ${dir}
> for x in a b c d e f ; do
> echo $x > $x
> hg add $x
> hg ci -m $x
> done
> cd ..
> }
$ geneditor ()
> {
> # generate an editor script for selecting changesets to be edited
> choice=$1 # changesets that should be edited (using sed line ranges)
> cat <<EOF | sed 's:^....::'
> # editing the rules, replacing 'pick' with 'edit' for the chosen lines
> sed '${choice}s:^pick:edit:' "\$1" > "\${1}.tmp"
> mv "\${1}.tmp" "\$1"
> # displaying the resulting rules, minus comments and empty lines
> sed '/^#/d;/^$/d;s:^:| :' "\$1" >&2
> EOF
> }
$ startediting ()
> {
> # begin an editing session
> choice="$1" # changesets that should be edited
> number="$2" # number of changesets considered (from tip)
> comment="$3"
> geneditor "${choice}" > edit.sh
> echo % start editing the history ${comment}
> HGEDITOR="sh ./edit.sh" hg histedit -- -${number} 2>&1 | fixbundle
> }
$ continueediting ()
> {
> # continue an edit already in progress
> editor="$1" # message editor when finalizing editing
> comment="$2"
> echo % finalize changeset editing ${comment}
> HGEDITOR=${editor} hg histedit --continue 2>&1 | fixbundle
> }
$ graphlog ()
> {
> comment="${1:-log}"
> echo % "${comment}"
> hg glog --template '{rev} {node} \"{desc|firstline}\"\n'
> }
$ initrepo r1 "test editing with no change"
% test editing with no change
-----------------------------
$ cd r1
$ graphlog "log before editing"
% log before editing
@ 5 652413bf663ef2a641cab26574e46d5f5a64a55a "f"
|
o 4 e860deea161a2f77de56603b340ebbb4536308ae "e"
|
o 3 055a42cdd88768532f9cf79daa407fc8d138de9b "d"
|
o 2 177f92b773850b59254aa5e923436f921b55483b "c"
|
o 1 d2ae7f538514cd87c17547b0de4cea71fe1af9fb "b"
|
o 0 cb9a9f314b8b07ba71012fcdbc544b5a4d82ff5b "a"
$ startediting 2 3 "(not changing anything)" # edit the 2nd of 3 changesets
% start editing the history (not changing anything)
| pick 055a42cdd887 3 d
| edit e860deea161a 4 e
| pick 652413bf663e 5 f
0 files updated, 0 files merged, 2 files removed, 0 files unresolved
abort: Make changes as needed, you may commit or record as needed now.
When you are finished, run hg histedit --continue to resume.
$ continueediting true "(leaving commit message unaltered)"
% finalize changeset editing (leaving commit message unaltered)
0 files updated, 0 files merged, 0 files removed, 0 files unresolved
0 files updated, 0 files merged, 0 files removed, 0 files unresolved
check state of working copy
$ hg id
794fe033d0a0 tip
$ graphlog "log after history editing"
% log after history editing
@ 5 794fe033d0a030f8df77c5de945fca35c9181c30 "f"
|
o 4 04d2fab980779f332dec458cc944f28de8b43435 "e"
|
o 3 055a42cdd88768532f9cf79daa407fc8d138de9b "d"
|
o 2 177f92b773850b59254aa5e923436f921b55483b "c"
|
o 1 d2ae7f538514cd87c17547b0de4cea71fe1af9fb "b"
|
o 0 cb9a9f314b8b07ba71012fcdbc544b5a4d82ff5b "a"
$ cd ..
$ initrepo r2 "test editing with no change, then abort"
% test editing with no change, then abort
-----------------------------------------
$ cd r2
$ graphlog "log before editing"
% log before editing
@ 5 652413bf663ef2a641cab26574e46d5f5a64a55a "f"
|
o 4 e860deea161a2f77de56603b340ebbb4536308ae "e"
|
o 3 055a42cdd88768532f9cf79daa407fc8d138de9b "d"
|
o 2 177f92b773850b59254aa5e923436f921b55483b "c"
|
o 1 d2ae7f538514cd87c17547b0de4cea71fe1af9fb "b"
|
o 0 cb9a9f314b8b07ba71012fcdbc544b5a4d82ff5b "a"
$ startediting 1,2 3 "(not changing anything)" # edit the 1st two of 3 changesets
% start editing the history (not changing anything)
| edit 055a42cdd887 3 d
| edit e860deea161a 4 e
| pick 652413bf663e 5 f
0 files updated, 0 files merged, 3 files removed, 0 files unresolved
abort: Make changes as needed, you may commit or record as needed now.
When you are finished, run hg histedit --continue to resume.
$ continueediting true "(leaving commit message unaltered)"
% finalize changeset editing (leaving commit message unaltered)
0 files updated, 0 files merged, 0 files removed, 0 files unresolved
abort: Make changes as needed, you may commit or record as needed now.
When you are finished, run hg histedit --continue to resume.
$ graphlog "log after first edit"
% log after first edit
@ 6 e5ae3ca2f1ffdbd89ec41ebc273a231f7c3022f2 "d"
|
| o 5 652413bf663ef2a641cab26574e46d5f5a64a55a "f"
| |
| o 4 e860deea161a2f77de56603b340ebbb4536308ae "e"
| |
| o 3 055a42cdd88768532f9cf79daa407fc8d138de9b "d"
|/
o 2 177f92b773850b59254aa5e923436f921b55483b "c"
|
o 1 d2ae7f538514cd87c17547b0de4cea71fe1af9fb "b"
|
o 0 cb9a9f314b8b07ba71012fcdbc544b5a4d82ff5b "a"
abort editing session
$ hg histedit --abort 2>&1 | fixbundle
2 files updated, 0 files merged, 0 files removed, 0 files unresolved
$ graphlog "log after abort"
% log after abort
@ 5 652413bf663ef2a641cab26574e46d5f5a64a55a "f"
|
o 4 e860deea161a2f77de56603b340ebbb4536308ae "e"
|
o 3 055a42cdd88768532f9cf79daa407fc8d138de9b "d"
|
o 2 177f92b773850b59254aa5e923436f921b55483b "c"
|
o 1 d2ae7f538514cd87c17547b0de4cea71fe1af9fb "b"
|
o 0 cb9a9f314b8b07ba71012fcdbc544b5a4d82ff5b "a"
$ cd ..