view mercurial/server.py @ 41247:a89b20a49c13

rust-cpython: using MissingAncestors from Python code

As precedently done with LazyAncestors on cpython.rs, we test for the
presence of the 'rustext' module.

incrementalmissingrevs() has two callers within the Mercurial core:
`setdiscovery.partialdiscovery` and the `only()` revset.

This move shows a significant discovery performance improvement
in cases where the baseline is slow: using perfdiscovery on the PyPy
repos, prepared with `contrib/discovery-helper <repo> 50 100`, we
get averaged medians of 403ms with the Rust version vs 742ms without
(about 45% better).

But there are still indications that performance can be worse in cases
the baseline is fast, possibly due to the conversion from Python to
Rust and back becoming the bottleneck. We could measure this on
mozilla-central in cases were the delta is just a few changesets.
This requires confirmation, but if that's the reason, then an
upcoming `partialdiscovery` fully in Rust should solve the problem.

Differential Revision: https://phab.mercurial-scm.org/D5551

# server.py - utility and factory of server
#
# Copyright 2005-2007 Matt Mackall <[e-mail]>
#
# This software may be used and distributed according to the terms of the
# GNU General Public License version 2 or any later version.

from __future__ import absolute_import

import os

from .i18n import _

from . import (
    chgserver,
    cmdutil,
    commandserver,
    error,
    hgweb,
    pycompat,
    util,
)

from .utils import (
    procutil,
)

def runservice(opts, parentfn=None, initfn=None, runfn=None, logfile=None,
               runargs=None, appendpid=False):
    '''Run a command as a service.'''

    postexecargs = {}

    if opts['daemon_postexec']:
        for inst in opts['daemon_postexec']:
            if inst.startswith('unlink:'):
                postexecargs['unlink'] = inst[7:]
            elif inst.startswith('chdir:'):
                postexecargs['chdir'] = inst[6:]
            elif inst != 'none':
                raise error.Abort(_('invalid value for --daemon-postexec: %s')
                                  % inst)

    # When daemonized on Windows, redirect stdout/stderr to the lockfile (which
    # gets cleaned up after the child is up and running), so that the parent can
    # read and print the error if this child dies early.  See 594dd384803c.  On
    # other platforms, the child can write to the parent's stdio directly, until
    # it is redirected prior to runfn().
    if pycompat.iswindows and opts['daemon_postexec']:
        if 'unlink' in postexecargs and os.path.exists(postexecargs['unlink']):
            procutil.stdout.flush()
            procutil.stderr.flush()

            fd = os.open(postexecargs['unlink'],
                         os.O_WRONLY | os.O_APPEND | os.O_BINARY)
            try:
                os.dup2(fd, procutil.stdout.fileno())
                os.dup2(fd, procutil.stderr.fileno())
            finally:
                os.close(fd)

    def writepid(pid):
        if opts['pid_file']:
            if appendpid:
                mode = 'ab'
            else:
                mode = 'wb'
            fp = open(opts['pid_file'], mode)
            fp.write('%d\n' % pid)
            fp.close()

    if opts['daemon'] and not opts['daemon_postexec']:
        # Signal child process startup with file removal
        lockfd, lockpath = pycompat.mkstemp(prefix='hg-service-')
        os.close(lockfd)
        try:
            if not runargs:
                runargs = procutil.hgcmd() + pycompat.sysargv[1:]
            runargs.append('--daemon-postexec=unlink:%s' % lockpath)
            # Don't pass --cwd to the child process, because we've already
            # changed directory.
            for i in pycompat.xrange(1, len(runargs)):
                if runargs[i].startswith('--cwd='):
                    del runargs[i]
                    break
                elif runargs[i].startswith('--cwd'):
                    del runargs[i:i + 2]
                    break
            def condfn():
                return not os.path.exists(lockpath)
            pid = procutil.rundetached(runargs, condfn)
            if pid < 0:
                # If the daemonized process managed to write out an error msg,
                # report it.
                if pycompat.iswindows and os.path.exists(lockpath):
                    with open(lockpath, 'rb') as log:
                        for line in log:
                            procutil.stderr.write(line)
                raise error.Abort(_('child process failed to start'))
            writepid(pid)
        finally:
            util.tryunlink(lockpath)
        if parentfn:
            return parentfn(pid)
        else:
            return

    if initfn:
        initfn()

    if not opts['daemon']:
        writepid(procutil.getpid())

    if opts['daemon_postexec']:
        try:
            os.setsid()
        except AttributeError:
            pass

        if 'chdir' in postexecargs:
            os.chdir(postexecargs['chdir'])
        procutil.hidewindow()
        procutil.stdout.flush()
        procutil.stderr.flush()

        nullfd = os.open(os.devnull, os.O_RDWR)
        logfilefd = nullfd
        if logfile:
            logfilefd = os.open(logfile, os.O_RDWR | os.O_CREAT | os.O_APPEND,
                                0o666)
        os.dup2(nullfd, procutil.stdin.fileno())
        os.dup2(logfilefd, procutil.stdout.fileno())
        os.dup2(logfilefd, procutil.stderr.fileno())
        stdio = (procutil.stdin.fileno(), procutil.stdout.fileno(),
                 procutil.stderr.fileno())
        if nullfd not in stdio:
            os.close(nullfd)
        if logfile and logfilefd not in stdio:
            os.close(logfilefd)

        # Only unlink after redirecting stdout/stderr, so Windows doesn't
        # complain about a sharing violation.
        if 'unlink' in postexecargs:
            os.unlink(postexecargs['unlink'])

    if runfn:
        return runfn()

_cmdservicemap = {
    'chgunix': chgserver.chgunixservice,
    'pipe': commandserver.pipeservice,
    'unix': commandserver.unixforkingservice,
}

def _createcmdservice(ui, repo, opts):
    mode = opts['cmdserver']
    try:
        servicefn = _cmdservicemap[mode]
    except KeyError:
        raise error.Abort(_('unknown mode %s') % mode)
    commandserver.setuplogging(ui, repo)
    return servicefn(ui, repo, opts)

def _createhgwebservice(ui, repo, opts):
    # this way we can check if something was given in the command-line
    if opts.get('port'):
        opts['port'] = util.getport(opts.get('port'))

    alluis = {ui}
    if repo:
        baseui = repo.baseui
        alluis.update([repo.baseui, repo.ui])
    else:
        baseui = ui
    webconf = opts.get('web_conf') or opts.get('webdir_conf')
    if webconf:
        if opts.get('subrepos'):
            raise error.Abort(_('--web-conf cannot be used with --subrepos'))

        # load server settings (e.g. web.port) to "copied" ui, which allows
        # hgwebdir to reload webconf cleanly
        servui = ui.copy()
        servui.readconfig(webconf, sections=['web'])
        alluis.add(servui)
    elif opts.get('subrepos'):
        servui = ui

        # If repo is None, hgweb.createapp() already raises a proper abort
        # message as long as webconf is None.
        if repo:
            webconf = dict()
            cmdutil.addwebdirpath(repo, "", webconf)
    else:
        servui = ui

    optlist = ("name templates style address port prefix ipv6"
               " accesslog errorlog certificate encoding")
    for o in optlist.split():
        val = opts.get(o, '')
        if val in (None, ''): # should check against default options instead
            continue
        for u in alluis:
            u.setconfig("web", o, val, 'serve')

    app = hgweb.createapp(baseui, repo, webconf)
    return hgweb.httpservice(servui, app, opts)

def createservice(ui, repo, opts):
    if opts["cmdserver"]:
        return _createcmdservice(ui, repo, opts)
    else:
        return _createhgwebservice(ui, repo, opts)