view tests/test-absorb-filefixupstate.py @ 41247:a89b20a49c13

rust-cpython: using MissingAncestors from Python code

As precedently done with LazyAncestors on cpython.rs, we test for the
presence of the 'rustext' module.

incrementalmissingrevs() has two callers within the Mercurial core:
`setdiscovery.partialdiscovery` and the `only()` revset.

This move shows a significant discovery performance improvement
in cases where the baseline is slow: using perfdiscovery on the PyPy
repos, prepared with `contrib/discovery-helper <repo> 50 100`, we
get averaged medians of 403ms with the Rust version vs 742ms without
(about 45% better).

But there are still indications that performance can be worse in cases
the baseline is fast, possibly due to the conversion from Python to
Rust and back becoming the bottleneck. We could measure this on
mozilla-central in cases were the delta is just a few changesets.
This requires confirmation, but if that's the reason, then an
upcoming `partialdiscovery` fully in Rust should solve the problem.

Differential Revision: https://phab.mercurial-scm.org/D5551

from __future__ import absolute_import, print_function

import itertools
from mercurial import pycompat
from hgext import absorb

class simplefctx(object):
    def __init__(self, content):
        self.content = content

    def data(self):
        return self.content

def insertreturns(x):
    # insert "\n"s after each single char
    if isinstance(x, bytes):
        return b''.join(ch + b'\n' for ch in pycompat.bytestr(x))
    else:
        return pycompat.maplist(insertreturns, x)

def removereturns(x):
    # the revert of "insertreturns"
    if isinstance(x, bytes):
        return x.replace(b'\n', b'')
    else:
        return pycompat.maplist(removereturns, x)

def assertlistequal(lhs, rhs, decorator=lambda x: x):
    if lhs != rhs:
        raise RuntimeError('mismatch:\n actual:   %r\n expected: %r'
                           % tuple(map(decorator, [lhs, rhs])))

def testfilefixup(oldcontents, workingcopy, expectedcontents, fixups=None):
    """([str], str, [str], [(rev, a1, a2, b1, b2)]?) -> None

    workingcopy is a string, of which every character denotes a single line.

    oldcontents, expectedcontents are lists of strings, every character of
    every string denots a single line.

    if fixups is not None, it's the expected fixups list and will be checked.
    """
    expectedcontents = insertreturns(expectedcontents)
    oldcontents = insertreturns(oldcontents)
    workingcopy = insertreturns(workingcopy)
    state = absorb.filefixupstate(pycompat.maplist(simplefctx, oldcontents),
                                  'path')
    state.diffwith(simplefctx(workingcopy))
    if fixups is not None:
        assertlistequal(state.fixups, fixups)
    state.apply()
    assertlistequal(state.finalcontents, expectedcontents, removereturns)

def buildcontents(linesrevs):
    # linesrevs: [(linecontent : str, revs : [int])]
    revs = set(itertools.chain(*[revs for line, revs in linesrevs]))
    return [b''] + [
        b''.join([l for l, rs in linesrevs if r in rs])
        for r in sorted(revs)
    ]

# input case 0: one single commit
case0 = [b'', b'11']

# replace a single chunk
testfilefixup(case0, b'', [b'', b''])
testfilefixup(case0, b'2', [b'', b'2'])
testfilefixup(case0, b'22', [b'', b'22'])
testfilefixup(case0, b'222', [b'', b'222'])

# input case 1: 3 lines, each commit adds one line
case1 = buildcontents([
    (b'1', [1, 2, 3]),
    (b'2', [   2, 3]),
    (b'3', [      3]),
])

# 1:1 line mapping
testfilefixup(case1, b'123', case1)
testfilefixup(case1, b'12c', [b'', b'1', b'12', b'12c'])
testfilefixup(case1, b'1b3', [b'', b'1', b'1b', b'1b3'])
testfilefixup(case1, b'1bc', [b'', b'1', b'1b', b'1bc'])
testfilefixup(case1, b'a23', [b'', b'a', b'a2', b'a23'])
testfilefixup(case1, b'a2c', [b'', b'a', b'a2', b'a2c'])
testfilefixup(case1, b'ab3', [b'', b'a', b'ab', b'ab3'])
testfilefixup(case1, b'abc', [b'', b'a', b'ab', b'abc'])

# non 1:1 edits
testfilefixup(case1, b'abcd', case1)
testfilefixup(case1, b'ab', case1)

# deletion
testfilefixup(case1, b'',   [b'', b'', b'', b''])
testfilefixup(case1, b'1',  [b'', b'1', b'1', b'1'])
testfilefixup(case1, b'2',  [b'', b'', b'2', b'2'])
testfilefixup(case1, b'3',  [b'', b'', b'', b'3'])
testfilefixup(case1, b'13', [b'', b'1', b'1', b'13'])

# replaces
testfilefixup(case1, b'1bb3', [b'', b'1', b'1bb', b'1bb3'])

# (confusing) replaces
testfilefixup(case1, b'1bbb', case1)
testfilefixup(case1, b'bbbb', case1)
testfilefixup(case1, b'bbb3', case1)
testfilefixup(case1, b'1b', case1)
testfilefixup(case1, b'bb', case1)
testfilefixup(case1, b'b3', case1)

# insertions at the beginning and the end
testfilefixup(case1, b'123c', [b'', b'1', b'12', b'123c'])
testfilefixup(case1, b'a123', [b'', b'a1', b'a12', b'a123'])

# (confusing) insertions
testfilefixup(case1, b'1a23', case1)
testfilefixup(case1, b'12b3', case1)

# input case 2: delete in the middle
case2 = buildcontents([
    (b'11', [1, 2]),
    (b'22', [1   ]),
    (b'33', [1, 2]),
])

# deletion (optimize code should make it 2 chunks)
testfilefixup(case2, b'', [b'', b'22', b''],
              fixups=[(4, 0, 2, 0, 0), (4, 2, 4, 0, 0)])

# 1:1 line mapping
testfilefixup(case2, b'aaaa', [b'', b'aa22aa', b'aaaa'])

# non 1:1 edits
# note: unlike case0, the chunk is not "continuous" and no edit allowed
testfilefixup(case2, b'aaa', case2)

# input case 3: rev 3 reverts rev 2
case3 = buildcontents([
    (b'1', [1, 2, 3]),
    (b'2', [   2   ]),
    (b'3', [1, 2, 3]),
])

# 1:1 line mapping
testfilefixup(case3, b'13', case3)
testfilefixup(case3, b'1b', [b'', b'1b', b'12b', b'1b'])
testfilefixup(case3, b'a3', [b'', b'a3', b'a23', b'a3'])
testfilefixup(case3, b'ab', [b'', b'ab', b'a2b', b'ab'])

# non 1:1 edits
testfilefixup(case3, b'a', case3)
testfilefixup(case3, b'abc', case3)

# deletion
testfilefixup(case3, b'', [b'', b'', b'2', b''])

# insertion
testfilefixup(case3, b'a13c', [b'', b'a13c', b'a123c', b'a13c'])

# input case 4: a slightly complex case
case4 = buildcontents([
    (b'1', [1, 2, 3]),
    (b'2', [   2, 3]),
    (b'3', [1, 2,  ]),
    (b'4', [1,    3]),
    (b'5', [      3]),
    (b'6', [   2, 3]),
    (b'7', [   2   ]),
    (b'8', [   2, 3]),
    (b'9', [      3]),
])

testfilefixup(case4, b'1245689', case4)
testfilefixup(case4, b'1a2456bbb', case4)
testfilefixup(case4, b'1abc5689', case4)
testfilefixup(case4, b'1ab5689', [b'', b'134', b'1a3678', b'1ab5689'])
testfilefixup(case4, b'aa2bcd8ee', [b'', b'aa34', b'aa23d78', b'aa2bcd8ee'])
testfilefixup(case4, b'aa2bcdd8ee',[b'', b'aa34', b'aa23678', b'aa24568ee'])
testfilefixup(case4, b'aaaaaa', case4)
testfilefixup(case4, b'aa258b', [b'', b'aa34', b'aa2378', b'aa258b'])
testfilefixup(case4, b'25bb', [b'', b'34', b'23678', b'25689'])
testfilefixup(case4, b'27', [b'', b'34', b'23678', b'245689'])
testfilefixup(case4, b'28', [b'', b'34', b'2378', b'28'])
testfilefixup(case4, b'', [b'', b'34', b'37', b''])

# input case 5: replace a small chunk which is near a deleted line
case5 = buildcontents([
    (b'12', [1, 2]),
    (b'3',  [1]),
    (b'4',  [1, 2]),
])

testfilefixup(case5, b'1cd4', [b'', b'1cd34', b'1cd4'])

# input case 6: base "changeset" is immutable
case6 = [b'1357', b'0125678']

testfilefixup(case6, b'0125678', case6)
testfilefixup(case6, b'0a25678', case6)
testfilefixup(case6, b'0a256b8', case6)
testfilefixup(case6, b'abcdefg', [b'1357', b'a1c5e7g'])
testfilefixup(case6, b'abcdef', case6)
testfilefixup(case6, b'', [b'1357', b'157'])
testfilefixup(case6, b'0123456789', [b'1357', b'0123456789'])

# input case 7: change an empty file
case7 = [b'']

testfilefixup(case7, b'1', case7)