view tests/test-http-api-httpv2.t @ 41247:a89b20a49c13

rust-cpython: using MissingAncestors from Python code

As precedently done with LazyAncestors on cpython.rs, we test for the
presence of the 'rustext' module.

incrementalmissingrevs() has two callers within the Mercurial core:
`setdiscovery.partialdiscovery` and the `only()` revset.

This move shows a significant discovery performance improvement
in cases where the baseline is slow: using perfdiscovery on the PyPy
repos, prepared with `contrib/discovery-helper <repo> 50 100`, we
get averaged medians of 403ms with the Rust version vs 742ms without
(about 45% better).

But there are still indications that performance can be worse in cases
the baseline is fast, possibly due to the conversion from Python to
Rust and back becoming the bottleneck. We could measure this on
mozilla-central in cases were the delta is just a few changesets.
This requires confirmation, but if that's the reason, then an
upcoming `partialdiscovery` fully in Rust should solve the problem.

Differential Revision: https://phab.mercurial-scm.org/D5551

#require no-chg

  $ . $TESTDIR/wireprotohelpers.sh
  $ enabledummycommands

  $ hg init server
  $ cat > server/.hg/hgrc << EOF
  > [experimental]
  > web.apiserver = true
  > EOF
  $ hg -R server serve -p $HGPORT -d --pid-file hg.pid
  $ cat hg.pid > $DAEMON_PIDS

HTTP v2 protocol not enabled by default

  $ sendhttpraw << EOF
  > httprequest GET api/$HTTPV2
  >     user-agent: test
  > EOF
  using raw connection to peer
  s>     GET /api/exp-http-v2-0003 HTTP/1.1\r\n
  s>     Accept-Encoding: identity\r\n
  s>     user-agent: test\r\n
  s>     host: $LOCALIP:$HGPORT\r\n (glob)
  s>     \r\n
  s> makefile('rb', None)
  s>     HTTP/1.1 404 Not Found\r\n
  s>     Server: testing stub value\r\n
  s>     Date: $HTTP_DATE$\r\n
  s>     Content-Type: text/plain\r\n
  s>     Content-Length: 33\r\n
  s>     \r\n
  s>     API exp-http-v2-0003 not enabled\n

Restart server with support for HTTP v2 API

  $ killdaemons.py
  $ enablehttpv2 server
  $ hg -R server serve -p $HGPORT -d --pid-file hg.pid
  $ cat hg.pid > $DAEMON_PIDS

Request to unknown command yields 404

  $ sendhttpraw << EOF
  > httprequest POST api/$HTTPV2/ro/badcommand
  >     user-agent: test
  > EOF
  using raw connection to peer
  s>     POST /api/exp-http-v2-0003/ro/badcommand HTTP/1.1\r\n
  s>     Accept-Encoding: identity\r\n
  s>     user-agent: test\r\n
  s>     host: $LOCALIP:$HGPORT\r\n (glob)
  s>     \r\n
  s> makefile('rb', None)
  s>     HTTP/1.1 404 Not Found\r\n
  s>     Server: testing stub value\r\n
  s>     Date: $HTTP_DATE$\r\n
  s>     Content-Type: text/plain\r\n
  s>     Content-Length: 42\r\n
  s>     \r\n
  s>     unknown wire protocol command: badcommand\n

GET to read-only command yields a 405

  $ sendhttpraw << EOF
  > httprequest GET api/$HTTPV2/ro/customreadonly
  >     user-agent: test
  > EOF
  using raw connection to peer
  s>     GET /api/exp-http-v2-0003/ro/customreadonly HTTP/1.1\r\n
  s>     Accept-Encoding: identity\r\n
  s>     user-agent: test\r\n
  s>     host: $LOCALIP:$HGPORT\r\n (glob)
  s>     \r\n
  s> makefile('rb', None)
  s>     HTTP/1.1 405 Method Not Allowed\r\n
  s>     Server: testing stub value\r\n
  s>     Date: $HTTP_DATE$\r\n
  s>     Allow: POST\r\n
  s>     Content-Length: 30\r\n
  s>     \r\n
  s>     commands require POST requests

Missing Accept header results in 406

  $ sendhttpraw << EOF
  > httprequest POST api/$HTTPV2/ro/customreadonly
  >     user-agent: test
  > EOF
  using raw connection to peer
  s>     POST /api/exp-http-v2-0003/ro/customreadonly HTTP/1.1\r\n
  s>     Accept-Encoding: identity\r\n
  s>     user-agent: test\r\n
  s>     host: $LOCALIP:$HGPORT\r\n (glob)
  s>     \r\n
  s> makefile('rb', None)
  s>     HTTP/1.1 406 Not Acceptable\r\n
  s>     Server: testing stub value\r\n
  s>     Date: $HTTP_DATE$\r\n
  s>     Content-Type: text/plain\r\n
  s>     Content-Length: 85\r\n
  s>     \r\n
  s>     client MUST specify Accept header with value: application/mercurial-exp-framing-0006\n

Bad Accept header results in 406

  $ sendhttpraw << EOF
  > httprequest POST api/$HTTPV2/ro/customreadonly
  >     accept: invalid
  >     user-agent: test
  > EOF
  using raw connection to peer
  s>     POST /api/exp-http-v2-0003/ro/customreadonly HTTP/1.1\r\n
  s>     Accept-Encoding: identity\r\n
  s>     accept: invalid\r\n
  s>     user-agent: test\r\n
  s>     host: $LOCALIP:$HGPORT\r\n (glob)
  s>     \r\n
  s> makefile('rb', None)
  s>     HTTP/1.1 406 Not Acceptable\r\n
  s>     Server: testing stub value\r\n
  s>     Date: $HTTP_DATE$\r\n
  s>     Content-Type: text/plain\r\n
  s>     Content-Length: 85\r\n
  s>     \r\n
  s>     client MUST specify Accept header with value: application/mercurial-exp-framing-0006\n

Bad Content-Type header results in 415

  $ sendhttpraw << EOF
  > httprequest POST api/$HTTPV2/ro/customreadonly
  >     accept: $MEDIATYPE
  >     user-agent: test
  >     content-type: badmedia
  > EOF
  using raw connection to peer
  s>     POST /api/exp-http-v2-0003/ro/customreadonly HTTP/1.1\r\n
  s>     Accept-Encoding: identity\r\n
  s>     accept: application/mercurial-exp-framing-0006\r\n
  s>     content-type: badmedia\r\n
  s>     user-agent: test\r\n
  s>     host: $LOCALIP:$HGPORT\r\n (glob)
  s>     \r\n
  s> makefile('rb', None)
  s>     HTTP/1.1 415 Unsupported Media Type\r\n
  s>     Server: testing stub value\r\n
  s>     Date: $HTTP_DATE$\r\n
  s>     Content-Type: text/plain\r\n
  s>     Content-Length: 88\r\n
  s>     \r\n
  s>     client MUST send Content-Type header with value: application/mercurial-exp-framing-0006\n

Request to read-only command works out of the box

  $ sendhttpraw << EOF
  > httprequest POST api/$HTTPV2/ro/customreadonly
  >     accept: $MEDIATYPE
  >     content-type: $MEDIATYPE
  >     user-agent: test
  >     frame 1 1 stream-begin command-request new cbor:{b'name': b'customreadonly'}
  > EOF
  using raw connection to peer
  s>     POST /api/exp-http-v2-0003/ro/customreadonly HTTP/1.1\r\n
  s>     Accept-Encoding: identity\r\n
  s>     *\r\n (glob)
  s>     content-type: application/mercurial-exp-framing-0006\r\n
  s>     user-agent: test\r\n
  s>     content-length: 29\r\n
  s>     host: $LOCALIP:$HGPORT\r\n (glob)
  s>     \r\n
  s>     \x15\x00\x00\x01\x00\x01\x01\x11\xa1DnameNcustomreadonly
  s> makefile('rb', None)
  s>     HTTP/1.1 200 OK\r\n
  s>     Server: testing stub value\r\n
  s>     Date: $HTTP_DATE$\r\n
  s>     Content-Type: application/mercurial-exp-framing-0006\r\n
  s>     Transfer-Encoding: chunked\r\n
  s>     \r\n
  s>     11\r\n
  s>     \t\x00\x00\x01\x00\x02\x01\x92Hidentity
  s>     \r\n
  s>     13\r\n
  s>     \x0b\x00\x00\x01\x00\x02\x041\xa1FstatusBok
  s>     \r\n
  s>     27\r\n
  s>     \x1f\x00\x00\x01\x00\x02\x041X\x1dcustomreadonly bytes response
  s>     \r\n
  s>     8\r\n
  s>     \x00\x00\x00\x01\x00\x02\x002
  s>     \r\n
  s>     0\r\n
  s>     \r\n

  $ sendhttpv2peerverbose << EOF
  > command customreadonly
  > EOF
  creating http peer for wire protocol version 2
  sending customreadonly command
  s>     POST /api/exp-http-v2-0003/ro/customreadonly HTTP/1.1\r\n
  s>     Accept-Encoding: identity\r\n
  s>     accept: application/mercurial-exp-framing-0006\r\n
  s>     content-type: application/mercurial-exp-framing-0006\r\n
  s>     content-length: 65\r\n
  s>     host: $LOCALIP:$HGPORT\r\n (glob)
  s>     user-agent: Mercurial debugwireproto\r\n
  s>     \r\n
  s>     \x1c\x00\x00\x01\x00\x01\x01\x82\xa1Pcontentencodings\x81Hidentity\x15\x00\x00\x01\x00\x01\x00\x11\xa1DnameNcustomreadonly
  s> makefile('rb', None)
  s>     HTTP/1.1 200 OK\r\n
  s>     Server: testing stub value\r\n
  s>     Date: $HTTP_DATE$\r\n
  s>     Content-Type: application/mercurial-exp-framing-0006\r\n
  s>     Transfer-Encoding: chunked\r\n
  s>     \r\n
  s>     11\r\n
  s>     \t\x00\x00\x01\x00\x02\x01\x92
  s>     Hidentity
  s>     \r\n
  received frame(size=9; request=1; stream=2; streamflags=stream-begin; type=stream-settings; flags=eos)
  s>     13\r\n
  s>     \x0b\x00\x00\x01\x00\x02\x041
  s>     \xa1FstatusBok
  s>     \r\n
  received frame(size=11; request=1; stream=2; streamflags=encoded; type=command-response; flags=continuation)
  s>     27\r\n
  s>     \x1f\x00\x00\x01\x00\x02\x041
  s>     X\x1dcustomreadonly bytes response
  s>     \r\n
  received frame(size=31; request=1; stream=2; streamflags=encoded; type=command-response; flags=continuation)
  s>     8\r\n
  s>     \x00\x00\x00\x01\x00\x02\x002
  s>     \r\n
  s>     0\r\n
  s>     \r\n
  received frame(size=0; request=1; stream=2; streamflags=; type=command-response; flags=eos)
  response: gen[
    b'customreadonly bytes response'
  ]
  (sent 2 HTTP requests and * bytes; received * bytes in responses) (glob)

Request to read-write command fails because server is read-only by default

GET to read-write request yields 405

  $ sendhttpraw << EOF
  > httprequest GET api/$HTTPV2/rw/customreadonly
  >     user-agent: test
  > EOF
  using raw connection to peer
  s>     GET /api/exp-http-v2-0003/rw/customreadonly HTTP/1.1\r\n
  s>     Accept-Encoding: identity\r\n
  s>     user-agent: test\r\n
  s>     host: $LOCALIP:$HGPORT\r\n (glob)
  s>     \r\n
  s> makefile('rb', None)
  s>     HTTP/1.1 405 Method Not Allowed\r\n
  s>     Server: testing stub value\r\n
  s>     Date: $HTTP_DATE$\r\n
  s>     Allow: POST\r\n
  s>     Content-Length: 30\r\n
  s>     \r\n
  s>     commands require POST requests

Even for unknown commands

  $ sendhttpraw << EOF
  > httprequest GET api/$HTTPV2/rw/badcommand
  >     user-agent: test
  > EOF
  using raw connection to peer
  s>     GET /api/exp-http-v2-0003/rw/badcommand HTTP/1.1\r\n
  s>     Accept-Encoding: identity\r\n
  s>     user-agent: test\r\n
  s>     host: $LOCALIP:$HGPORT\r\n (glob)
  s>     \r\n
  s> makefile('rb', None)
  s>     HTTP/1.1 405 Method Not Allowed\r\n
  s>     Server: testing stub value\r\n
  s>     Date: $HTTP_DATE$\r\n
  s>     Allow: POST\r\n
  s>     Content-Length: 30\r\n
  s>     \r\n
  s>     commands require POST requests

SSL required by default

  $ sendhttpraw << EOF
  > httprequest POST api/$HTTPV2/rw/customreadonly
  >     user-agent: test
  > EOF
  using raw connection to peer
  s>     POST /api/exp-http-v2-0003/rw/customreadonly HTTP/1.1\r\n
  s>     Accept-Encoding: identity\r\n
  s>     user-agent: test\r\n
  s>     host: $LOCALIP:$HGPORT\r\n (glob)
  s>     \r\n
  s> makefile('rb', None)
  s>     HTTP/1.1 403 ssl required\r\n
  s>     Server: testing stub value\r\n
  s>     Date: $HTTP_DATE$\r\n
  s>     Content-Length: 17\r\n
  s>     \r\n
  s>     permission denied

Restart server to allow non-ssl read-write operations

  $ killdaemons.py
  $ cat > server/.hg/hgrc << EOF
  > [experimental]
  > web.apiserver = true
  > web.api.http-v2 = true
  > [web]
  > push_ssl = false
  > allow-push = *
  > EOF

  $ hg -R server serve -p $HGPORT -d --pid-file hg.pid -E error.log
  $ cat hg.pid > $DAEMON_PIDS

Authorized request for valid read-write command works

  $ sendhttpraw << EOF
  > httprequest POST api/$HTTPV2/rw/customreadonly
  >     user-agent: test
  >     accept: $MEDIATYPE
  >     content-type: $MEDIATYPE
  >     frame 1 1 stream-begin command-request new cbor:{b'name': b'customreadonly'}
  > EOF
  using raw connection to peer
  s>     POST /api/exp-http-v2-0003/rw/customreadonly HTTP/1.1\r\n
  s>     Accept-Encoding: identity\r\n
  s>     accept: application/mercurial-exp-framing-0006\r\n
  s>     content-type: application/mercurial-exp-framing-0006\r\n
  s>     user-agent: test\r\n
  s>     content-length: 29\r\n
  s>     host: $LOCALIP:$HGPORT\r\n (glob)
  s>     \r\n
  s>     \x15\x00\x00\x01\x00\x01\x01\x11\xa1DnameNcustomreadonly
  s> makefile('rb', None)
  s>     HTTP/1.1 200 OK\r\n
  s>     Server: testing stub value\r\n
  s>     Date: $HTTP_DATE$\r\n
  s>     Content-Type: application/mercurial-exp-framing-0006\r\n
  s>     Transfer-Encoding: chunked\r\n
  s>     \r\n
  s>     11\r\n
  s>     \t\x00\x00\x01\x00\x02\x01\x92Hidentity
  s>     \r\n
  s>     13\r\n
  s>     \x0b\x00\x00\x01\x00\x02\x041\xa1FstatusBok
  s>     \r\n
  s>     27\r\n
  s>     \x1f\x00\x00\x01\x00\x02\x041X\x1dcustomreadonly bytes response
  s>     \r\n
  s>     8\r\n
  s>     \x00\x00\x00\x01\x00\x02\x002
  s>     \r\n
  s>     0\r\n
  s>     \r\n

Authorized request for unknown command is rejected

  $ sendhttpraw << EOF
  > httprequest POST api/$HTTPV2/rw/badcommand
  >     user-agent: test
  >     accept: $MEDIATYPE
  > EOF
  using raw connection to peer
  s>     POST /api/exp-http-v2-0003/rw/badcommand HTTP/1.1\r\n
  s>     Accept-Encoding: identity\r\n
  s>     accept: application/mercurial-exp-framing-0006\r\n
  s>     user-agent: test\r\n
  s>     host: $LOCALIP:$HGPORT\r\n (glob)
  s>     \r\n
  s> makefile('rb', None)
  s>     HTTP/1.1 404 Not Found\r\n
  s>     Server: testing stub value\r\n
  s>     Date: $HTTP_DATE$\r\n
  s>     Content-Type: text/plain\r\n
  s>     Content-Length: 42\r\n
  s>     \r\n
  s>     unknown wire protocol command: badcommand\n

debugreflect isn't enabled by default

  $ sendhttpraw << EOF
  > httprequest POST api/$HTTPV2/ro/debugreflect
  >     user-agent: test
  > EOF
  using raw connection to peer
  s>     POST /api/exp-http-v2-0003/ro/debugreflect HTTP/1.1\r\n
  s>     Accept-Encoding: identity\r\n
  s>     user-agent: test\r\n
  s>     host: $LOCALIP:$HGPORT\r\n (glob)
  s>     \r\n
  s> makefile('rb', None)
  s>     HTTP/1.1 404 Not Found\r\n
  s>     Server: testing stub value\r\n
  s>     Date: $HTTP_DATE$\r\n
  s>     Content-Type: text/plain\r\n
  s>     Content-Length: 34\r\n
  s>     \r\n
  s>     debugreflect service not available

Restart server to get debugreflect endpoint

  $ killdaemons.py
  $ cat > server/.hg/hgrc << EOF
  > [experimental]
  > web.apiserver = true
  > web.api.debugreflect = true
  > web.api.http-v2 = true
  > [web]
  > push_ssl = false
  > allow-push = *
  > EOF

  $ hg -R server serve -p $HGPORT -d --pid-file hg.pid -E error.log
  $ cat hg.pid > $DAEMON_PIDS

Command frames can be reflected via debugreflect

  $ sendhttpraw << EOF
  > httprequest POST api/$HTTPV2/ro/debugreflect
  >     accept: $MEDIATYPE
  >     content-type: $MEDIATYPE
  >     user-agent: test
  >     frame 1 1 stream-begin command-request new cbor:{b'name': b'command1', b'args': {b'foo': b'val1', b'bar1': b'val'}}
  > EOF
  using raw connection to peer
  s>     POST /api/exp-http-v2-0003/ro/debugreflect HTTP/1.1\r\n
  s>     Accept-Encoding: identity\r\n
  s>     accept: application/mercurial-exp-framing-0006\r\n
  s>     content-type: application/mercurial-exp-framing-0006\r\n
  s>     user-agent: test\r\n
  s>     content-length: 47\r\n
  s>     host: $LOCALIP:$HGPORT\r\n (glob)
  s>     \r\n
  s>     \'\x00\x00\x01\x00\x01\x01\x11\xa2Dargs\xa2Dbar1CvalCfooDval1DnameHcommand1
  s> makefile('rb', None)
  s>     HTTP/1.1 200 OK\r\n
  s>     Server: testing stub value\r\n
  s>     Date: $HTTP_DATE$\r\n
  s>     Content-Type: text/plain\r\n
  s>     Content-Length: 223\r\n
  s>     \r\n
  s>     received: 1 1 1 \xa2Dargs\xa2Dbar1CvalCfooDval1DnameHcommand1\n
  s>     ["runcommand", {"args": {"bar1": "val", "foo": "val1"}, "command": "command1", "data": null, "redirect": null, "requestid": 1}]\n
  s>     received: <no frame>\n
  s>     {"action": "noop"}

Multiple requests to regular command URL are not allowed

  $ sendhttpraw << EOF
  > httprequest POST api/$HTTPV2/ro/customreadonly
  >     accept: $MEDIATYPE
  >     content-type: $MEDIATYPE
  >     user-agent: test
  >     frame 1 1 stream-begin command-request new cbor:{b'name': b'customreadonly'}
  > EOF
  using raw connection to peer
  s>     POST /api/exp-http-v2-0003/ro/customreadonly HTTP/1.1\r\n
  s>     Accept-Encoding: identity\r\n
  s>     accept: application/mercurial-exp-framing-0006\r\n
  s>     content-type: application/mercurial-exp-framing-0006\r\n
  s>     user-agent: test\r\n
  s>     content-length: 29\r\n
  s>     host: $LOCALIP:$HGPORT\r\n (glob)
  s>     \r\n
  s>     \x15\x00\x00\x01\x00\x01\x01\x11\xa1DnameNcustomreadonly
  s> makefile('rb', None)
  s>     HTTP/1.1 200 OK\r\n
  s>     Server: testing stub value\r\n
  s>     Date: $HTTP_DATE$\r\n
  s>     Content-Type: application/mercurial-exp-framing-0006\r\n
  s>     Transfer-Encoding: chunked\r\n
  s>     \r\n
  s>     11\r\n
  s>     \t\x00\x00\x01\x00\x02\x01\x92Hidentity
  s>     \r\n
  s>     13\r\n
  s>     \x0b\x00\x00\x01\x00\x02\x041\xa1FstatusBok
  s>     \r\n
  s>     27\r\n
  s>     \x1f\x00\x00\x01\x00\x02\x041X\x1dcustomreadonly bytes response
  s>     \r\n
  s>     8\r\n
  s>     \x00\x00\x00\x01\x00\x02\x002
  s>     \r\n
  s>     0\r\n
  s>     \r\n

Multiple requests to "multirequest" URL are allowed

  $ sendhttpraw << EOF
  > httprequest POST api/$HTTPV2/ro/multirequest
  >     accept: $MEDIATYPE
  >     content-type: $MEDIATYPE
  >     user-agent: test
  >     frame 1 1 stream-begin command-request new cbor:{b'name': b'customreadonly'}
  >     frame 3 1 0 command-request new cbor:{b'name': b'customreadonly'}
  > EOF
  using raw connection to peer
  s>     POST /api/exp-http-v2-0003/ro/multirequest HTTP/1.1\r\n
  s>     Accept-Encoding: identity\r\n
  s>     *\r\n (glob)
  s>     *\r\n (glob)
  s>     user-agent: test\r\n
  s>     content-length: 58\r\n
  s>     host: $LOCALIP:$HGPORT\r\n (glob)
  s>     \r\n
  s>     \x15\x00\x00\x01\x00\x01\x01\x11\xa1DnameNcustomreadonly\x15\x00\x00\x03\x00\x01\x00\x11\xa1DnameNcustomreadonly
  s> makefile('rb', None)
  s>     HTTP/1.1 200 OK\r\n
  s>     Server: testing stub value\r\n
  s>     Date: $HTTP_DATE$\r\n
  s>     Content-Type: application/mercurial-exp-framing-0006\r\n
  s>     Transfer-Encoding: chunked\r\n
  s>     \r\n
  s>     11\r\n
  s>     \t\x00\x00\x01\x00\x02\x01\x92Hidentity
  s>     \r\n
  s>     13\r\n
  s>     \x0b\x00\x00\x01\x00\x02\x041\xa1FstatusBok
  s>     \r\n
  s>     27\r\n
  s>     \x1f\x00\x00\x01\x00\x02\x041X\x1dcustomreadonly bytes response
  s>     \r\n
  s>     8\r\n
  s>     \x00\x00\x00\x01\x00\x02\x002
  s>     \r\n
  s>     13\r\n
  s>     \x0b\x00\x00\x03\x00\x02\x041\xa1FstatusBok
  s>     \r\n
  s>     27\r\n
  s>     \x1f\x00\x00\x03\x00\x02\x041X\x1dcustomreadonly bytes response
  s>     \r\n
  s>     8\r\n
  s>     \x00\x00\x00\x03\x00\x02\x002
  s>     \r\n
  s>     0\r\n
  s>     \r\n

Interleaved requests to "multirequest" are processed

  $ sendhttpraw << EOF
  > httprequest POST api/$HTTPV2/ro/multirequest
  >     accept: $MEDIATYPE
  >     content-type: $MEDIATYPE
  >     user-agent: test
  >     frame 1 1 stream-begin command-request new|more \xa2Dargs\xa1Inamespace
  >     frame 3 1 0 command-request new|more \xa2Dargs\xa1Inamespace
  >     frame 3 1 0 command-request continuation JnamespacesDnameHlistkeys
  >     frame 1 1 0 command-request continuation IbookmarksDnameHlistkeys
  > EOF
  using raw connection to peer
  s>     POST /api/exp-http-v2-0003/ro/multirequest HTTP/1.1\r\n
  s>     Accept-Encoding: identity\r\n
  s>     accept: application/mercurial-exp-framing-0006\r\n
  s>     content-type: application/mercurial-exp-framing-0006\r\n
  s>     user-agent: test\r\n
  s>     content-length: 115\r\n
  s>     host: $LOCALIP:$HGPORT\r\n (glob)
  s>     \r\n
  s>     \x11\x00\x00\x01\x00\x01\x01\x15\xa2Dargs\xa1Inamespace\x11\x00\x00\x03\x00\x01\x00\x15\xa2Dargs\xa1Inamespace\x19\x00\x00\x03\x00\x01\x00\x12JnamespacesDnameHlistkeys\x18\x00\x00\x01\x00\x01\x00\x12IbookmarksDnameHlistkeys
  s> makefile('rb', None)
  s>     HTTP/1.1 200 OK\r\n
  s>     Server: testing stub value\r\n
  s>     Date: $HTTP_DATE$\r\n
  s>     Content-Type: application/mercurial-exp-framing-0006\r\n
  s>     Transfer-Encoding: chunked\r\n
  s>     \r\n
  s>     11\r\n
  s>     \t\x00\x00\x03\x00\x02\x01\x92Hidentity
  s>     \r\n
  s>     13\r\n
  s>     \x0b\x00\x00\x03\x00\x02\x041\xa1FstatusBok
  s>     \r\n
  s>     28\r\n
  s>      \x00\x00\x03\x00\x02\x041\xa3Ibookmarks@Jnamespaces@Fphases@
  s>     \r\n
  s>     8\r\n
  s>     \x00\x00\x00\x03\x00\x02\x002
  s>     \r\n
  s>     13\r\n
  s>     \x0b\x00\x00\x01\x00\x02\x041\xa1FstatusBok
  s>     \r\n
  s>     9\r\n
  s>     \x01\x00\x00\x01\x00\x02\x041\xa0
  s>     \r\n
  s>     8\r\n
  s>     \x00\x00\x00\x01\x00\x02\x002
  s>     \r\n
  s>     0\r\n
  s>     \r\n

Restart server to disable read-write access

  $ killdaemons.py
  $ cat > server/.hg/hgrc << EOF
  > [experimental]
  > web.apiserver = true
  > web.api.debugreflect = true
  > web.api.http-v2 = true
  > [web]
  > push_ssl = false
  > EOF

  $ hg -R server serve -p $HGPORT -d --pid-file hg.pid -E error.log
  $ cat hg.pid > $DAEMON_PIDS

Attempting to run a read-write command via multirequest on read-only URL is not allowed

  $ sendhttpraw << EOF
  > httprequest POST api/$HTTPV2/ro/multirequest
  >     accept: $MEDIATYPE
  >     content-type: $MEDIATYPE
  >     user-agent: test
  >     frame 1 1 stream-begin command-request new cbor:{b'name': b'pushkey'}
  > EOF
  using raw connection to peer
  s>     POST /api/exp-http-v2-0003/ro/multirequest HTTP/1.1\r\n
  s>     Accept-Encoding: identity\r\n
  s>     accept: application/mercurial-exp-framing-0006\r\n
  s>     content-type: application/mercurial-exp-framing-0006\r\n
  s>     user-agent: test\r\n
  s>     content-length: 22\r\n
  s>     host: $LOCALIP:$HGPORT\r\n (glob)
  s>     \r\n
  s>     \x0e\x00\x00\x01\x00\x01\x01\x11\xa1DnameGpushkey
  s> makefile('rb', None)
  s>     HTTP/1.1 403 Forbidden\r\n
  s>     Server: testing stub value\r\n
  s>     Date: $HTTP_DATE$\r\n
  s>     Content-Type: text/plain\r\n
  s>     Content-Length: 52\r\n
  s>     \r\n
  s>     insufficient permissions to execute command: pushkey

Defining an invalid content encoding results in warning

  $ hg --config experimental.httppeer.v2-encoder-order=identity,badencoder --verbose debugwireproto --nologhandshake --peer http2 http://$LOCALIP:$HGPORT/ << EOF
  > command heads
  > EOF
  creating http peer for wire protocol version 2
  sending heads command
  wire protocol version 2 encoder referenced in config (badencoder) is not known; ignoring
  s>     POST /api/exp-http-v2-0003/ro/heads HTTP/1.1\r\n
  s>     Accept-Encoding: identity\r\n
  s>     accept: application/mercurial-exp-framing-0006\r\n
  s>     content-type: application/mercurial-exp-framing-0006\r\n
  s>     content-length: 56\r\n
  s>     host: $LOCALIP:$HGPORT\r\n (glob)
  s>     user-agent: Mercurial debugwireproto\r\n
  s>     \r\n
  s>     \x1c\x00\x00\x01\x00\x01\x01\x82\xa1Pcontentencodings\x81Hidentity\x0c\x00\x00\x01\x00\x01\x00\x11\xa1DnameEheads
  s> makefile('rb', None)
  s>     HTTP/1.1 200 OK\r\n
  s>     Server: testing stub value\r\n
  s>     Date: $HTTP_DATE$\r\n
  s>     Content-Type: application/mercurial-exp-framing-0006\r\n
  s>     Transfer-Encoding: chunked\r\n
  s>     \r\n
  s>     11\r\n
  s>     \t\x00\x00\x01\x00\x02\x01\x92
  s>     Hidentity
  s>     \r\n
  received frame(size=9; request=1; stream=2; streamflags=stream-begin; type=stream-settings; flags=eos)
  s>     13\r\n
  s>     \x0b\x00\x00\x01\x00\x02\x041
  s>     \xa1FstatusBok
  s>     \r\n
  received frame(size=11; request=1; stream=2; streamflags=encoded; type=command-response; flags=continuation)
  s>     1e\r\n
  s>     \x16\x00\x00\x01\x00\x02\x041
  s>     \x81T\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00
  s>     \r\n
  received frame(size=22; request=1; stream=2; streamflags=encoded; type=command-response; flags=continuation)
  s>     8\r\n
  s>     \x00\x00\x00\x01\x00\x02\x002
  s>     \r\n
  s>     0\r\n
  s>     \r\n
  received frame(size=0; request=1; stream=2; streamflags=; type=command-response; flags=eos)
  response: [
    b'\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00'
  ]
  (sent 2 HTTP requests and * bytes; received * bytes in responses) (glob)

#if zstd

  $ hg --verbose debugwireproto --nologhandshake --peer http2 http://$LOCALIP:$HGPORT/ << EOF
  > command heads
  > EOF
  creating http peer for wire protocol version 2
  sending heads command
  s>     POST /api/exp-http-v2-0003/ro/heads HTTP/1.1\r\n
  s>     Accept-Encoding: identity\r\n
  s>     accept: application/mercurial-exp-framing-0006\r\n
  s>     content-type: application/mercurial-exp-framing-0006\r\n
  s>     content-length: 70\r\n
  s>     host: $LOCALIP:$HGPORT\r\n (glob)
  s>     user-agent: Mercurial debugwireproto\r\n
  s>     \r\n
  s>     *\x00\x00\x01\x00\x01\x01\x82\xa1Pcontentencodings\x83Hzstd-8mbDzlibHidentity\x0c\x00\x00\x01\x00\x01\x00\x11\xa1DnameEheads
  s> makefile('rb', None)
  s>     HTTP/1.1 200 OK\r\n
  s>     Server: testing stub value\r\n
  s>     Date: $HTTP_DATE$\r\n
  s>     Content-Type: application/mercurial-exp-framing-0006\r\n
  s>     Transfer-Encoding: chunked\r\n
  s>     \r\n
  s>     11\r\n
  s>     \t\x00\x00\x01\x00\x02\x01\x92
  s>     Hzstd-8mb
  s>     \r\n
  received frame(size=9; request=1; stream=2; streamflags=stream-begin; type=stream-settings; flags=eos)
  s>     25\r\n
  s>     \x1d\x00\x00\x01\x00\x02\x042
  s>     (\xb5/\xfd\x00P\xa4\x00\x00p\xa1FstatusBok\x81T\x00\x01\x00\tP\x02
  s>     \r\n
  received frame(size=29; request=1; stream=2; streamflags=encoded; type=command-response; flags=eos)
  s>     0\r\n
  s>     \r\n
  response: [
    b'\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00'
  ]
  (sent 2 HTTP requests and * bytes; received * bytes in responses) (glob)

#endif

  $ cat error.log