view tests/test-mq-eol.t @ 41247:a89b20a49c13

rust-cpython: using MissingAncestors from Python code

As precedently done with LazyAncestors on cpython.rs, we test for the
presence of the 'rustext' module.

incrementalmissingrevs() has two callers within the Mercurial core:
`setdiscovery.partialdiscovery` and the `only()` revset.

This move shows a significant discovery performance improvement
in cases where the baseline is slow: using perfdiscovery on the PyPy
repos, prepared with `contrib/discovery-helper <repo> 50 100`, we
get averaged medians of 403ms with the Rust version vs 742ms without
(about 45% better).

But there are still indications that performance can be worse in cases
the baseline is fast, possibly due to the conversion from Python to
Rust and back becoming the bottleneck. We could measure this on
mozilla-central in cases were the delta is just a few changesets.
This requires confirmation, but if that's the reason, then an
upcoming `partialdiscovery` fully in Rust should solve the problem.

Differential Revision: https://phab.mercurial-scm.org/D5551

Test interactions between mq and patch.eol


  $ cat <<EOF >> $HGRCPATH
  > [extensions]
  > mq =
  > [diff]
  > nodates = 1
  > EOF

  $ cat > makepatch.py <<EOF
  > f = open('eol.diff', 'wb')
  > w = f.write
  > w(b'test message\n')
  > w(b'diff --git a/a b/a\n')
  > w(b'--- a/a\n')
  > w(b'+++ b/a\n')
  > w(b'@@ -1,5 +1,5 @@\n')
  > w(b' a\n')
  > w(b'-b\r\n')
  > w(b'+y\r\n')
  > w(b' c\r\n')
  > w(b' d\n')
  > w(b'-e\n')
  > w(b'\ No newline at end of file\n')
  > w(b'+z\r\n')
  > w(b'\ No newline at end of file\r\n')
  > EOF

  $ cat > cateol.py <<EOF
  > import sys
  > for line in open(sys.argv[1], 'rb'):
  >     line = line.replace(b'\r', b'<CR>')
  >     line = line.replace(b'\n', b'<LF>')
  >     print(line)
  > EOF

  $ hg init repo
  $ cd repo
  $ echo '\.diff' > .hgignore
  $ echo '\.rej' >> .hgignore


Test different --eol values

  $ "$PYTHON" -c 'open("a", "wb").write(b"a\nb\nc\nd\ne")'
  $ hg ci -Am adda
  adding .hgignore
  adding a
  $ "$PYTHON" ../makepatch.py
  $ hg qimport eol.diff
  adding eol.diff to series file

should fail in strict mode

  $ hg qpush
  applying eol.diff
  patching file a
  Hunk #1 FAILED at 0
  1 out of 1 hunks FAILED -- saving rejects to file a.rej
  patch failed, unable to continue (try -v)
  patch failed, rejects left in working directory
  errors during apply, please fix and qrefresh eol.diff
  [2]
  $ hg qpop
  popping eol.diff
  patch queue now empty

invalid eol

  $ hg --config patch.eol='LFCR' qpush
  applying eol.diff
  patch failed, unable to continue (try -v)
  patch failed, rejects left in working directory
  errors during apply, please fix and qrefresh eol.diff
  [2]
  $ hg qpop
  popping eol.diff
  patch queue now empty

force LF

  $ hg --config patch.eol='CRLF' qpush
  applying eol.diff
  now at: eol.diff
  $ hg qrefresh
  $ "$PYTHON" ../cateol.py .hg/patches/eol.diff
  # HG changeset patch<LF>
  # Parent  0d0bf99a8b7a3842c6f8ef09e34f69156c4bd9d0<LF>
  test message<LF>
  <LF>
  diff -r 0d0bf99a8b7a a<LF>
  --- a/a<LF>
  +++ b/a<LF>
  @@ -1,5 +1,5 @@<LF>
  -a<LF>
  -b<LF>
  -c<LF>
  -d<LF>
  -e<LF>
  \ No newline at end of file<LF>
  +a<CR><LF>
  +y<CR><LF>
  +c<CR><LF>
  +d<CR><LF>
  +z<LF>
  \ No newline at end of file<LF>
  $ "$PYTHON" ../cateol.py a
  a<CR><LF>
  y<CR><LF>
  c<CR><LF>
  d<CR><LF>
  z
  $ hg qpop
  popping eol.diff
  patch queue now empty

push again forcing LF and compare revisions

  $ hg --config patch.eol='CRLF' qpush
  applying eol.diff
  now at: eol.diff
  $ "$PYTHON" ../cateol.py a
  a<CR><LF>
  y<CR><LF>
  c<CR><LF>
  d<CR><LF>
  z
  $ hg qpop
  popping eol.diff
  patch queue now empty

push again without LF and compare revisions

  $ hg qpush
  applying eol.diff
  now at: eol.diff
  $ "$PYTHON" ../cateol.py a
  a<CR><LF>
  y<CR><LF>
  c<CR><LF>
  d<CR><LF>
  z
  $ hg qpop
  popping eol.diff
  patch queue now empty
  $ cd ..


Test .rej file EOL are left unchanged

  $ hg init testeol
  $ cd testeol
  $ "$PYTHON" -c "open('a', 'wb').write(b'1\r\n2\r\n3\r\n4')"
  $ hg ci -Am adda
  adding a
  $ "$PYTHON" -c "open('a', 'wb').write(b'1\r\n2\r\n33\r\n4')"
  $ hg qnew patch1
  $ hg qpop
  popping patch1
  patch queue now empty
  $ "$PYTHON" -c "open('a', 'wb').write(b'1\r\n22\r\n33\r\n4')"
  $ hg ci -m changea

  $ hg --config 'patch.eol=LF' qpush
  applying patch1
  patching file a
  Hunk #1 FAILED at 0
  1 out of 1 hunks FAILED -- saving rejects to file a.rej
  patch failed, unable to continue (try -v)
  patch failed, rejects left in working directory
  errors during apply, please fix and qrefresh patch1
  [2]
  $ hg qpop
  popping patch1
  patch queue now empty
  $ cat a.rej
  --- a
  +++ a
  @@ -1,4 +1,4 @@
   1\r (esc)
   2\r (esc)
  -3\r (esc)
  +33\r (esc)
   4
  \ No newline at end of file

  $ hg --config 'patch.eol=auto' qpush
  applying patch1
  patching file a
  Hunk #1 FAILED at 0
  1 out of 1 hunks FAILED -- saving rejects to file a.rej
  patch failed, unable to continue (try -v)
  patch failed, rejects left in working directory
  errors during apply, please fix and qrefresh patch1
  [2]
  $ hg qpop
  popping patch1
  patch queue now empty
  $ cat a.rej
  --- a
  +++ a
  @@ -1,4 +1,4 @@
   1\r (esc)
   2\r (esc)
  -3\r (esc)
  +33\r (esc)
   4
  \ No newline at end of file
  $ cd ..