view tests/test-mq-guards.t @ 41247:a89b20a49c13

rust-cpython: using MissingAncestors from Python code

As precedently done with LazyAncestors on cpython.rs, we test for the
presence of the 'rustext' module.

incrementalmissingrevs() has two callers within the Mercurial core:
`setdiscovery.partialdiscovery` and the `only()` revset.

This move shows a significant discovery performance improvement
in cases where the baseline is slow: using perfdiscovery on the PyPy
repos, prepared with `contrib/discovery-helper <repo> 50 100`, we
get averaged medians of 403ms with the Rust version vs 742ms without
(about 45% better).

But there are still indications that performance can be worse in cases
the baseline is fast, possibly due to the conversion from Python to
Rust and back becoming the bottleneck. We could measure this on
mozilla-central in cases were the delta is just a few changesets.
This requires confirmation, but if that's the reason, then an
upcoming `partialdiscovery` fully in Rust should solve the problem.

Differential Revision: https://phab.mercurial-scm.org/D5551

  $ echo "[extensions]" >> $HGRCPATH
  $ echo "mq=" >> $HGRCPATH

  $ hg init
  $ hg qinit

  $ echo x > x
  $ hg ci -Ama
  adding x

  $ hg qnew a.patch
  $ echo a > a
  $ hg add a
  $ hg qrefresh

  $ hg qnew b.patch
  $ echo b > b
  $ hg add b
  $ hg qrefresh

  $ hg qnew c.patch
  $ echo c > c
  $ hg add c
  $ hg qrefresh

  $ hg qpop -a
  popping c.patch
  popping b.patch
  popping a.patch
  patch queue now empty


should fail

  $ hg qguard does-not-exist.patch +bleh
  abort: no patch named does-not-exist.patch
  [255]


should fail

  $ hg qguard +fail
  abort: no patches applied
  [255]

  $ hg qpush
  applying a.patch
  now at: a.patch

should guard a.patch

  $ hg qguard +a

should print +a

  $ hg qguard
  a.patch: +a
  $ hg qpop
  popping a.patch
  patch queue now empty


should fail

  $ hg qpush a.patch
  cannot push 'a.patch' - guarded by '+a'
  [1]

  $ hg qguard a.patch
  a.patch: +a

should push b.patch

  $ hg qpush
  applying b.patch
  now at: b.patch

  $ hg qpop
  popping b.patch
  patch queue now empty

test selection of an empty guard

  $ hg qselect ""
  abort: guard cannot be an empty string
  [255]
  $ hg qselect a
  number of unguarded, unapplied patches has changed from 2 to 3

should push a.patch

  $ hg qpush
  applying a.patch
  now at: a.patch

  $ hg qguard -- c.patch -a

should print -a

  $ hg qguard c.patch
  c.patch: -a


should skip c.patch

  $ hg qpush -a
  applying b.patch
  skipping c.patch - guarded by '-a'
  now at: b.patch
  $ hg qnext
  all patches applied
  [1]

should display b.patch

  $ hg qtop
  b.patch

  $ hg qguard -n c.patch

should push c.patch

  $ hg qpush -a
  applying c.patch
  now at: c.patch

  $ hg qpop -a
  popping c.patch
  popping b.patch
  popping a.patch
  patch queue now empty
  $ hg qselect -n
  guards deactivated
  number of unguarded, unapplied patches has changed from 3 to 2

should push all

  $ hg qpush -a
  applying b.patch
  applying c.patch
  now at: c.patch

  $ hg qpop -a
  popping c.patch
  popping b.patch
  patch queue now empty
  $ hg qguard a.patch +1
  $ hg qguard b.patch +2
  $ hg qselect 1
  number of unguarded, unapplied patches has changed from 1 to 2

should push a.patch, not b.patch

  $ hg qpush
  applying a.patch
  now at: a.patch
  $ hg qpush
  applying c.patch
  now at: c.patch
  $ hg qpop -a
  popping c.patch
  popping a.patch
  patch queue now empty

  $ hg qselect 2

should push b.patch

  $ hg qpush
  applying b.patch
  now at: b.patch
  $ hg qpush -a
  applying c.patch
  now at: c.patch
  $ hg qprev
  b.patch

Used to be an issue with holes in the patch sequence
So, put one hole on the base and ask for topmost patch.

  $ hg qtop
  c.patch
  $ hg qpop -a
  popping c.patch
  popping b.patch
  patch queue now empty

  $ hg qselect 1 2
  number of unguarded, unapplied patches has changed from 2 to 3

should push a.patch, b.patch

  $ hg qpush
  applying a.patch
  now at: a.patch
  $ hg qpush
  applying b.patch
  now at: b.patch
  $ hg qpop -a
  popping b.patch
  popping a.patch
  patch queue now empty

  $ hg qguard -- a.patch +1 +2 -3
  $ hg qselect 1 2 3
  number of unguarded, unapplied patches has changed from 3 to 2


list patches and guards

  $ hg qguard -l
  a.patch: +1 +2 -3
  b.patch: +2
  c.patch: unguarded

have at least one patch applied to test coloring

  $ hg qpush
  applying b.patch
  now at: b.patch

list patches and guards with color

  $ hg --config extensions.color= qguard --config color.mode=ansi \
  >     -l --color=always
  \x1b[0;30;1ma.patch\x1b[0m: \x1b[0;33m+1\x1b[0m \x1b[0;33m+2\x1b[0m \x1b[0;31m-3\x1b[0m (esc)
  \x1b[0;34;1;4mb.patch\x1b[0m: \x1b[0;33m+2\x1b[0m (esc)
  \x1b[0;30;1mc.patch\x1b[0m: \x1b[0;32munguarded\x1b[0m (esc)

should pop b.patch

  $ hg qpop
  popping b.patch
  patch queue now empty

list series

  $ hg qseries -v
  0 G a.patch
  1 U b.patch
  2 U c.patch

list guards

  $ hg qselect
  1
  2
  3

should push b.patch

  $ hg qpush
  applying b.patch
  now at: b.patch

  $ hg qpush -a
  applying c.patch
  now at: c.patch
  $ hg qselect -n --reapply -v
  guards deactivated
  popping guarded patches
  popping c.patch
  popping b.patch
  patch queue now empty
  reapplying unguarded patches
  skipping a.patch - guarded by '+1' '+2'
  skipping b.patch - guarded by '+2'
  skipping a.patch - guarded by '+1' '+2'
  skipping b.patch - guarded by '+2'
  applying c.patch
  patching file c
  adding c
  committing files:
  c
  committing manifest
  committing changelog
  now at: c.patch

guards in series file: +1 +2 -3

  $ hg qselect -s
  +1
  +2
  -3

should show c.patch

  $ hg qapplied
  c.patch

  $ hg qrename a.patch new.patch

should show :


new.patch: +1 +2 -3


b.patch: +2


c.patch: unguarded

  $ hg qguard -l
  new.patch: +1 +2 -3
  b.patch: +2
  c.patch: unguarded

  $ hg qnew d.patch
  $ hg qpop
  popping d.patch
  now at: c.patch

should show new.patch and b.patch as Guarded, c.patch as Applied


and d.patch as Unapplied

  $ hg qseries -v
  0 G new.patch
  1 G b.patch
  2 A c.patch
  3 U d.patch

qseries again, but with color

  $ hg --config extensions.color= --config color.mode=ansi qseries -v --color=always
  0 G \x1b[0;30;1mnew.patch\x1b[0m (esc)
  1 G \x1b[0;30;1mb.patch\x1b[0m (esc)
  2 A \x1b[0;34;1;4mc.patch\x1b[0m (esc)
  3 U \x1b[0;30;1md.patch\x1b[0m (esc)

  $ hg qguard d.patch +2

new.patch, b.patch: Guarded. c.patch: Applied. d.patch: Guarded.

  $ hg qseries -v
  0 G new.patch
  1 G b.patch
  2 A c.patch
  3 G d.patch

  $ qappunappv()
  > {
  >     for command in qapplied "qapplied -v" qunapplied "qunapplied -v"; do
  >         echo % hg $command
  >         hg $command
  >     done
  > }

  $ hg qpop -a
  popping c.patch
  patch queue now empty
  $ hg qguard -l
  new.patch: +1 +2 -3
  b.patch: +2
  c.patch: unguarded
  d.patch: +2
  $ qappunappv
  % hg qapplied
  % hg qapplied -v
  % hg qunapplied
  c.patch
  % hg qunapplied -v
  0 G new.patch
  1 G b.patch
  2 U c.patch
  3 G d.patch
  $ hg qselect 1
  number of unguarded, unapplied patches has changed from 1 to 2
  $ qappunappv
  % hg qapplied
  % hg qapplied -v
  % hg qunapplied
  new.patch
  c.patch
  % hg qunapplied -v
  0 U new.patch
  1 G b.patch
  2 U c.patch
  3 G d.patch
  $ hg qpush -a
  applying new.patch
  skipping b.patch - guarded by '+2'
  applying c.patch
  skipping d.patch - guarded by '+2'
  now at: c.patch
  $ qappunappv
  % hg qapplied
  new.patch
  c.patch
  % hg qapplied -v
  0 A new.patch
  1 G b.patch
  2 A c.patch
  % hg qunapplied
  % hg qunapplied -v
  3 G d.patch
  $ hg qselect 2
  number of unguarded, unapplied patches has changed from 0 to 1
  $ qappunappv
  % hg qapplied
  new.patch
  c.patch
  % hg qapplied -v
  0 A new.patch
  1 U b.patch
  2 A c.patch
  % hg qunapplied
  d.patch
  % hg qunapplied -v
  3 U d.patch

  $ for patch in `hg qseries`; do
  >     echo % hg qapplied $patch
  >     hg qapplied $patch
  >     echo % hg qunapplied $patch
  >     hg qunapplied $patch
  > done
  % hg qapplied new.patch
  new.patch
  % hg qunapplied new.patch
  b.patch
  d.patch
  % hg qapplied b.patch
  new.patch
  % hg qunapplied b.patch
  d.patch
  % hg qapplied c.patch
  new.patch
  c.patch
  % hg qunapplied c.patch
  d.patch
  % hg qapplied d.patch
  new.patch
  c.patch
  % hg qunapplied d.patch


hg qseries -m: only b.patch should be shown
the guards file was not ignored in the past

  $ hg qdelete -k b.patch
  $ hg qseries -m
  b.patch

hg qseries -m with color

  $ hg --config extensions.color= --config color.mode=ansi qseries -m --color=always
  \x1b[0;31;1mb.patch\x1b[0m (esc)


excercise corner cases in "qselect --reapply"

  $ hg qpop -a
  popping c.patch
  popping new.patch
  patch queue now empty
  $ hg qguard -- new.patch -not-new
  $ hg qguard -- c.patch -not-c
  $ hg qguard -- d.patch -not-d
  $ hg qpush -a
  applying new.patch
  applying c.patch
  applying d.patch
  patch d.patch is empty
  now at: d.patch
  $ hg qguard -l
  new.patch: -not-new
  c.patch: -not-c
  d.patch: -not-d
  $ hg qselect --reapply not-d
  popping guarded patches
  popping d.patch
  now at: c.patch
  reapplying unguarded patches
  cannot push 'd.patch' - guarded by '-not-d'
  $ hg qser -v
  0 A new.patch
  1 A c.patch
  2 G d.patch
  $ hg qselect --reapply -n
  guards deactivated
  $ hg qpush
  applying d.patch
  patch d.patch is empty
  now at: d.patch
  $ hg qser -v
  0 A new.patch
  1 A c.patch
  2 A d.patch
  $ hg qselect --reapply not-c
  popping guarded patches
  popping d.patch
  popping c.patch
  now at: new.patch
  reapplying unguarded patches
  applying d.patch
  patch d.patch is empty
  now at: d.patch
  $ hg qser -v
  0 A new.patch
  1 G c.patch
  2 A d.patch
  $ hg qselect --reapply not-new
  popping guarded patches
  popping d.patch
  popping new.patch
  patch queue now empty
  reapplying unguarded patches
  applying c.patch
  applying d.patch
  patch d.patch is empty
  now at: d.patch
  $ hg qser -v
  0 G new.patch
  1 A c.patch
  2 A d.patch

test that qselect shows "number of guarded, applied patches" correctly

  $ hg qimport -q -e b.patch
  adding b.patch to series file
  $ hg qguard -- b.patch -not-b
  $ hg qpop -a -q
  patch queue now empty
  $ hg qunapplied -v
  0 G new.patch
  1 U c.patch
  2 U d.patch
  3 U b.patch
  $ hg qselect not-new not-c
  number of unguarded, unapplied patches has changed from 3 to 2
  $ hg qpush -q -a
  patch d.patch is empty
  now at: b.patch

  $ hg qapplied -v
  0 G new.patch
  1 G c.patch
  2 A d.patch
  3 A b.patch
  $ hg qselect --none
  guards deactivated
  $ hg qselect not-new not-c not-d
  number of guarded, applied patches has changed from 0 to 1

test that "qselect --reapply" reapplies patches successfully when the
already applied patch becomes unguarded and it follows the already
guarded (= not yet applied) one.

  $ hg qpop -q -a
  patch queue now empty
  $ hg qselect not-new not-c
  number of unguarded, unapplied patches has changed from 1 to 2
  $ hg qpush -q -a
  patch d.patch is empty
  now at: b.patch
  $ hg qapplied -v
  0 G new.patch
  1 G c.patch
  2 A d.patch
  3 A b.patch
  $ hg qselect -q --reapply not-c not-b
  now at: d.patch
  cannot push 'b.patch' - guarded by '-not-b'
  $ hg qseries -v
  0 U new.patch
  1 G c.patch
  2 A d.patch
  3 G b.patch

test that "qselect --reapply" checks applied patches correctly when no
applied patches becomes guarded but some of unapplied ones become
unguarded.

  $ hg qpop -q -a
  patch queue now empty
  $ hg qselect not-new not-c not-d
  number of unguarded, unapplied patches has changed from 2 to 1
  $ hg qpush -q -a
  now at: b.patch
  $ hg qapplied -v
  0 G new.patch
  1 G c.patch
  2 G d.patch
  3 A b.patch
  $ hg qselect -q --reapply not-new not-c
  $ hg qseries -v
  0 G new.patch
  1 G c.patch
  2 U d.patch
  3 A b.patch