Mercurial > hg
view tests/test-treediscovery-legacy.t @ 41247:a89b20a49c13
rust-cpython: using MissingAncestors from Python code
As precedently done with LazyAncestors on cpython.rs, we test for the
presence of the 'rustext' module.
incrementalmissingrevs() has two callers within the Mercurial core:
`setdiscovery.partialdiscovery` and the `only()` revset.
This move shows a significant discovery performance improvement
in cases where the baseline is slow: using perfdiscovery on the PyPy
repos, prepared with `contrib/discovery-helper <repo> 50 100`, we
get averaged medians of 403ms with the Rust version vs 742ms without
(about 45% better).
But there are still indications that performance can be worse in cases
the baseline is fast, possibly due to the conversion from Python to
Rust and back becoming the bottleneck. We could measure this on
mozilla-central in cases were the delta is just a few changesets.
This requires confirmation, but if that's the reason, then an
upcoming `partialdiscovery` fully in Rust should solve the problem.
Differential Revision: https://phab.mercurial-scm.org/D5551
author | Georges Racinet <georges.racinet@octobus.net> |
---|---|
date | Fri, 30 Nov 2018 14:35:57 +0100 |
parents | d0abd7949ea3 |
children | 95c4cca641f6 |
line wrap: on
line source
Tests discovery against servers without getbundle support: $ cat >> $HGRCPATH <<EOF > [ui] > logtemplate="{rev} {node|short}: {desc} {branches}\n" > EOF $ cp $HGRCPATH $HGRCPATH-withcap $ CAP="getbundle known changegroupsubset bundle2" $ . "$TESTDIR/notcapable" $ cp $HGRCPATH $HGRCPATH-nocap $ cp $HGRCPATH-withcap $HGRCPATH Prep for test server without branchmap support $ CAP="branchmap" $ . "$TESTDIR/notcapable" $ cp $HGRCPATH $HGRCPATH-nocap-branchmap $ cp $HGRCPATH-withcap $HGRCPATH Setup HTTP server control: $ remote=http://localhost:$HGPORT/ $ export remote $ tstart() { > echo '[web]' > $1/.hg/hgrc > echo 'push_ssl = false' >> $1/.hg/hgrc > echo 'allow_push = *' >> $1/.hg/hgrc > cp $HGRCPATH-nocap $HGRCPATH > hg serve -R $1 -p $HGPORT -d --pid-file=hg.pid -E errors.log > cat hg.pid >> $DAEMON_PIDS > } $ tstop() { > killdaemons.py > cp $HGRCPATH-withcap $HGRCPATH > } Both are empty: $ hg init empty1 $ hg init empty2 $ tstart empty2 $ hg incoming -R empty1 $remote comparing with http://localhost:$HGPORT/ no changes found [1] $ hg outgoing -R empty1 $remote comparing with http://localhost:$HGPORT/ no changes found [1] $ hg pull -R empty1 $remote pulling from http://localhost:$HGPORT/ no changes found $ hg push -R empty1 $remote pushing to http://localhost:$HGPORT/ no changes found [1] $ tstop Base repo: $ hg init main $ cd main $ hg debugbuilddag -mo '+2:tbase @name1 +3:thead1 <tbase @name2 +4:thead2 @both /thead1 +2:tmaintip' $ hg log -G o 11 a19bfa7e7328: r11 both | o 10 8b6bad1512e1: r10 both | o 9 025829e08038: r9 both |\ | o 8 d8f638ac69e9: r8 name2 | | | o 7 b6b4d315a2ac: r7 name2 | | | o 6 6c6f5d5f3c11: r6 name2 | | | o 5 70314b29987d: r5 name2 | | o | 4 e71dbbc70e03: r4 name1 | | o | 3 2c8d5d5ec612: r3 name1 | | o | 2 a7892891da29: r2 name1 |/ o 1 0019a3b924fd: r1 | o 0 d57206cc072a: r0 $ cd .. $ tstart main Full clone: $ hg clone main full updating to branch default 2 files updated, 0 files merged, 0 files removed, 0 files unresolved $ cd full $ hg incoming $remote comparing with http://localhost:$HGPORT/ searching for changes no changes found [1] $ hg outgoing $remote comparing with http://localhost:$HGPORT/ searching for changes no changes found [1] $ hg pull $remote pulling from http://localhost:$HGPORT/ searching for changes no changes found $ hg push $remote pushing to http://localhost:$HGPORT/ searching for changes no changes found [1] $ cd .. Local is empty: $ cd empty1 $ hg incoming $remote --rev name1 comparing with http://localhost:$HGPORT/ abort: cannot look up remote changes; remote repository does not support the 'changegroupsubset' capability! [255] $ hg incoming $remote comparing with http://localhost:$HGPORT/ 0 d57206cc072a: r0 1 0019a3b924fd: r1 2 a7892891da29: r2 name1 3 2c8d5d5ec612: r3 name1 4 e71dbbc70e03: r4 name1 5 70314b29987d: r5 name2 6 6c6f5d5f3c11: r6 name2 7 b6b4d315a2ac: r7 name2 8 d8f638ac69e9: r8 name2 9 025829e08038: r9 both 10 8b6bad1512e1: r10 both 11 a19bfa7e7328: r11 both $ hg outgoing $remote comparing with http://localhost:$HGPORT/ no changes found [1] $ hg push $remote pushing to http://localhost:$HGPORT/ no changes found [1] $ hg pull $remote pulling from http://localhost:$HGPORT/ requesting all changes adding changesets adding manifests adding file changes added 12 changesets with 24 changes to 2 files new changesets d57206cc072a:a19bfa7e7328 (run 'hg update' to get a working copy) $ hg incoming $remote comparing with http://localhost:$HGPORT/ searching for changes no changes found [1] $ cd .. Local is subset: $ cp $HGRCPATH-withcap $HGRCPATH $ hg clone main subset --rev name2 ; cd subset adding changesets adding manifests adding file changes added 6 changesets with 12 changes to 2 files new changesets d57206cc072a:d8f638ac69e9 updating to branch name2 2 files updated, 0 files merged, 0 files removed, 0 files unresolved $ cp $HGRCPATH-nocap $HGRCPATH $ hg incoming $remote comparing with http://localhost:$HGPORT/ searching for changes 6 a7892891da29: r2 name1 7 2c8d5d5ec612: r3 name1 8 e71dbbc70e03: r4 name1 9 025829e08038: r9 both 10 8b6bad1512e1: r10 both 11 a19bfa7e7328: r11 both $ hg outgoing $remote comparing with http://localhost:$HGPORT/ searching for changes no changes found [1] $ hg push $remote pushing to http://localhost:$HGPORT/ searching for changes no changes found [1] $ hg pull $remote pulling from http://localhost:$HGPORT/ searching for changes adding changesets adding manifests adding file changes added 6 changesets with 12 changes to 2 files new changesets a7892891da29:a19bfa7e7328 (run 'hg update' to get a working copy) $ hg incoming $remote comparing with http://localhost:$HGPORT/ searching for changes no changes found [1] $ cd .. Remote is empty: $ tstop ; tstart empty2 $ cd main $ hg incoming $remote comparing with http://localhost:$HGPORT/ searching for changes no changes found [1] $ hg outgoing $remote comparing with http://localhost:$HGPORT/ searching for changes 0 d57206cc072a: r0 1 0019a3b924fd: r1 2 a7892891da29: r2 name1 3 2c8d5d5ec612: r3 name1 4 e71dbbc70e03: r4 name1 5 70314b29987d: r5 name2 6 6c6f5d5f3c11: r6 name2 7 b6b4d315a2ac: r7 name2 8 d8f638ac69e9: r8 name2 9 025829e08038: r9 both 10 8b6bad1512e1: r10 both 11 a19bfa7e7328: r11 both $ hg pull $remote pulling from http://localhost:$HGPORT/ searching for changes no changes found $ hg push $remote pushing to http://localhost:$HGPORT/ searching for changes remote: adding changesets remote: adding manifests remote: adding file changes remote: added 12 changesets with 24 changes to 2 files $ hg outgoing $remote comparing with http://localhost:$HGPORT/ searching for changes no changes found [1] $ cd .. Local is superset: $ tstop $ hg clone main subset2 --rev name2 adding changesets adding manifests adding file changes added 6 changesets with 12 changes to 2 files new changesets d57206cc072a:d8f638ac69e9 updating to branch name2 2 files updated, 0 files merged, 0 files removed, 0 files unresolved $ tstart subset2 $ cd main $ hg incoming $remote comparing with http://localhost:$HGPORT/ searching for changes no changes found [1] $ hg outgoing $remote comparing with http://localhost:$HGPORT/ searching for changes 2 a7892891da29: r2 name1 3 2c8d5d5ec612: r3 name1 4 e71dbbc70e03: r4 name1 9 025829e08038: r9 both 10 8b6bad1512e1: r10 both 11 a19bfa7e7328: r11 both $ hg pull $remote pulling from http://localhost:$HGPORT/ searching for changes no changes found $ hg push $remote pushing to http://localhost:$HGPORT/ searching for changes abort: push creates new remote branches: both, name1! (use 'hg push --new-branch' to create new remote branches) [255] $ hg push $remote --new-branch pushing to http://localhost:$HGPORT/ searching for changes remote: adding changesets remote: adding manifests remote: adding file changes remote: added 6 changesets with 12 changes to 2 files $ hg outgoing $remote comparing with http://localhost:$HGPORT/ searching for changes no changes found [1] $ cd .. Partial pull: $ tstop ; tstart main $ hg clone $remote partial --rev name2 abort: partial pull cannot be done because other repository doesn't support changegroupsubset. [255] $ hg init partial; cd partial $ hg incoming $remote --rev name2 comparing with http://localhost:$HGPORT/ abort: cannot look up remote changes; remote repository does not support the 'changegroupsubset' capability! [255] $ hg pull $remote --rev name2 pulling from http://localhost:$HGPORT/ abort: partial pull cannot be done because other repository doesn't support changegroupsubset. [255] $ cd .. $ tstop Exercise pushing to server without branchmap capability $ cp $HGRCPATH-nocap-branchmap $HGRCPATH-nocap $ hg init rlocal $ cd rlocal $ echo A > A $ hg ci -Am A adding A $ cd .. $ hg clone rlocal rremote updating to branch default 1 files updated, 0 files merged, 0 files removed, 0 files unresolved $ cd rlocal $ echo B > B $ hg ci -Am B adding B $ cd .. $ tstart rremote $ cd rlocal $ hg incoming $remote comparing with http://localhost:$HGPORT/ searching for changes no changes found [1] $ hg outgoing $remote comparing with http://localhost:$HGPORT/ searching for changes 1 27547f69f254: B $ hg pull $remote pulling from http://localhost:$HGPORT/ searching for changes no changes found 1 local changesets published $ hg push $remote pushing to http://localhost:$HGPORT/ searching for changes remote: adding changesets remote: adding manifests remote: adding file changes remote: added 1 changesets with 1 changes to 1 files $ hg outgoing $remote comparing with http://localhost:$HGPORT/ searching for changes no changes found [1] $ cd .. $ tstop