view tests/test-mq-eol.t @ 20836:a8b4541bb961

grep: reuse the first "util.binary()" result for efficiency

Before this patch, to check whether the file in the specified revision
is binary or not, "util.binary()" is invoked via internal function
"binary()" of "hg grep" once per a line of "hg grep" output, even
though binary-ness is not changed in the same file.

This patch reuses the first "util.binary()" invocation result by
annotating internal function "binary()" with "@util.cachefunc".

Performance improvement measured by "hgperf grep -r 88d8e568add1 vfs
mercurial/scmutil.py":

  before this patch:
    ! wall 0.024000 comb 0.015600 user 0.015600 sys 0.000000 (best of 118)

  after this patch:
    ! wall 0.023000 comb 0.015600 user 0.015600 sys 0.000000 (best of 123)

Status of recent(88d8e568add1) "mercurial/scmutil.py":

  # of lines:     919 (may affect cost of search)
  # of bytes:   29633 (may affect cost of "util.binary()")
  # of matches:    22 (may affect frequency of "util.binary()")

Test interactions between mq and patch.eol


  $ echo "[extensions]" >> $HGRCPATH
  $ echo "mq=" >> $HGRCPATH
  $ echo "[diff]" >> $HGRCPATH
  $ echo "nodates=1" >> $HGRCPATH

  $ cat > makepatch.py <<EOF
  > f = file('eol.diff', 'wb')
  > w = f.write
  > w('test message\n')
  > w('diff --git a/a b/a\n')
  > w('--- a/a\n')
  > w('+++ b/a\n')
  > w('@@ -1,5 +1,5 @@\n')
  > w(' a\n')
  > w('-b\r\n')
  > w('+y\r\n')
  > w(' c\r\n')
  > w(' d\n')
  > w('-e\n')
  > w('\ No newline at end of file\n')
  > w('+z\r\n')
  > w('\ No newline at end of file\r\n')
  > EOF

  $ cat > cateol.py <<EOF
  > import sys
  > for line in file(sys.argv[1], 'rb'):
  >     line = line.replace('\r', '<CR>')
  >     line = line.replace('\n', '<LF>')
  >     print line
  > EOF

  $ hg init repo
  $ cd repo
  $ echo '\.diff' > .hgignore
  $ echo '\.rej' >> .hgignore


Test different --eol values

  $ python -c 'file("a", "wb").write("a\nb\nc\nd\ne")'
  $ hg ci -Am adda
  adding .hgignore
  adding a
  $ python ../makepatch.py
  $ hg qimport eol.diff
  adding eol.diff to series file

should fail in strict mode

  $ hg qpush
  applying eol.diff
  patching file a
  Hunk #1 FAILED at 0
  1 out of 1 hunks FAILED -- saving rejects to file a.rej
  patch failed, unable to continue (try -v)
  patch failed, rejects left in working dir
  errors during apply, please fix and refresh eol.diff
  [2]
  $ hg qpop
  popping eol.diff
  patch queue now empty

invalid eol

  $ hg --config patch.eol='LFCR' qpush
  applying eol.diff
  patch failed, unable to continue (try -v)
  patch failed, rejects left in working dir
  errors during apply, please fix and refresh eol.diff
  [2]
  $ hg qpop
  popping eol.diff
  patch queue now empty

force LF

  $ hg --config patch.eol='CRLF' qpush
  applying eol.diff
  now at: eol.diff
  $ hg qrefresh
  $ python ../cateol.py .hg/patches/eol.diff
  test message<LF>
  <LF>
  diff -r 0d0bf99a8b7a a<LF>
  --- a/a<LF>
  +++ b/a<LF>
  @@ -1,5 +1,5 @@<LF>
  -a<LF>
  -b<LF>
  -c<LF>
  -d<LF>
  -e<LF>
  \ No newline at end of file<LF>
  +a<CR><LF>
  +y<CR><LF>
  +c<CR><LF>
  +d<CR><LF>
  +z<LF>
  \ No newline at end of file<LF>
  $ python ../cateol.py a
  a<CR><LF>
  y<CR><LF>
  c<CR><LF>
  d<CR><LF>
  z
  $ hg qpop
  popping eol.diff
  patch queue now empty

push again forcing LF and compare revisions

  $ hg --config patch.eol='CRLF' qpush
  applying eol.diff
  now at: eol.diff
  $ python ../cateol.py a
  a<CR><LF>
  y<CR><LF>
  c<CR><LF>
  d<CR><LF>
  z
  $ hg qpop
  popping eol.diff
  patch queue now empty

push again without LF and compare revisions

  $ hg qpush
  applying eol.diff
  now at: eol.diff
  $ python ../cateol.py a
  a<CR><LF>
  y<CR><LF>
  c<CR><LF>
  d<CR><LF>
  z
  $ hg qpop
  popping eol.diff
  patch queue now empty
  $ cd ..


Test .rej file EOL are left unchanged

  $ hg init testeol
  $ cd testeol
  $ python -c "file('a', 'wb').write('1\r\n2\r\n3\r\n4')"
  $ hg ci -Am adda
  adding a
  $ python -c "file('a', 'wb').write('1\r\n2\r\n33\r\n4')"
  $ hg qnew patch1
  $ hg qpop
  popping patch1
  patch queue now empty
  $ python -c "file('a', 'wb').write('1\r\n22\r\n33\r\n4')"
  $ hg ci -m changea

  $ hg --config 'patch.eol=LF' qpush
  applying patch1
  patching file a
  Hunk #1 FAILED at 0
  1 out of 1 hunks FAILED -- saving rejects to file a.rej
  patch failed, unable to continue (try -v)
  patch failed, rejects left in working dir
  errors during apply, please fix and refresh patch1
  [2]
  $ hg qpop
  popping patch1
  patch queue now empty
  $ cat a.rej
  --- a
  +++ a
  @@ -1,4 +1,4 @@
   1\r (esc)
   2\r (esc)
  -3\r (esc)
  +33\r (esc)
   4
  \ No newline at end of file

  $ hg --config 'patch.eol=auto' qpush
  applying patch1
  patching file a
  Hunk #1 FAILED at 0
  1 out of 1 hunks FAILED -- saving rejects to file a.rej
  patch failed, unable to continue (try -v)
  patch failed, rejects left in working dir
  errors during apply, please fix and refresh patch1
  [2]
  $ hg qpop
  popping patch1
  patch queue now empty
  $ cat a.rej
  --- a
  +++ a
  @@ -1,4 +1,4 @@
   1\r (esc)
   2\r (esc)
  -3\r (esc)
  +33\r (esc)
   4
  \ No newline at end of file
  $ cd ..