view tests/test-contrib.t @ 14365:a8e3931e3fb5

revlog: linearize created changegroups in generaldelta revlogs

This greatly improves the speed of the bundling process, and often reduces the
bundle size considerably. (Although if the repository is already ordered, this
has little effect on both time and bundle size.)

For non-generaldelta clients, the reduced bundle size translates to a reduced
repository size, similar to shrinking the revlogs (which uses the exact same
algorithm). For generaldelta clients the difference is minor.

When the new bundle format comes, reordering will not be necessary since we
can then store the deltaparent relationsships directly. The eventual default
behavior for clients and servers is presented in the table below, where "new"
implies support for GD as well as the new bundle format:

                    old client                    new client
old server          old bundle, no reorder        old bundle, no reorder
new server, non-GD  old bundle, no reorder[1]     old bundle, no reorder[2]
new server, GD      old bundle, reorder[3]        new bundle, no reorder[4]

[1] reordering is expensive on the server in this case, skip it
[2] client can choose to do its own redelta here
[3] reordering is needed because otherwise the pull does a lot of extra
    work on the server
[4] reordering isn't needed because client can get deltabase in bundle
    format

Currently, the default is to reorder on GD-servers, and not otherwise. A new
setting, bundle.reorder, has been added to override the default reordering
behavior. It can be set to either 'auto' (the default), or any true or false
value as a standard boolean setting, to either force the reordering on or off
regardless of generaldelta.


Some timing data from a relatively branch test repository follows. All
bundling is done with --all --type none options.

Non-generaldelta, non-shrunk repo:
-----------------------------------
Size: 276M

Without reorder (default):
Bundle time: 14.4 seconds
Bundle size: 939M

With reorder:
Bundle time: 1 minute, 29.3 seconds
Bundle size: 381M

Generaldelta, non-shrunk repo:
-----------------------------------
Size: 87M

Without reorder:
Bundle time: 2 minutes, 1.4 seconds
Bundle size: 939M

With reorder (default):
Bundle time: 25.5 seconds
Bundle size: 381M

Set vars:

  $ CONTRIBDIR=$TESTDIR/../contrib

Prepare repo-a:

  $ hg init repo-a
  $ cd repo-a

  $ echo this is file a > a
  $ hg add a
  $ hg commit -m first

  $ echo adding to file a >> a
  $ hg commit -m second

  $ echo adding more to file a >> a
  $ hg commit -m third

  $ hg verify
  checking changesets
  checking manifests
  crosschecking files in changesets and manifests
  checking files
  1 files, 3 changesets, 3 total revisions

Dumping revlog of file a to stdout:

  $ python $CONTRIBDIR/dumprevlog .hg/store/data/a.i
  file: .hg/store/data/a.i
  node: 183d2312b35066fb6b3b449b84efc370d50993d0
  linkrev: 0
  parents: 0000000000000000000000000000000000000000 0000000000000000000000000000000000000000
  length: 15
  -start-
  this is file a
  
  -end-
  node: b1047953b6e6b633c0d8197eaa5116fbdfd3095b
  linkrev: 1
  parents: 183d2312b35066fb6b3b449b84efc370d50993d0 0000000000000000000000000000000000000000
  length: 32
  -start-
  this is file a
  adding to file a
  
  -end-
  node: 8c4fd1f7129b8cdec6c7f58bf48fb5237a4030c1
  linkrev: 2
  parents: b1047953b6e6b633c0d8197eaa5116fbdfd3095b 0000000000000000000000000000000000000000
  length: 54
  -start-
  this is file a
  adding to file a
  adding more to file a
  
  -end-

Dump all revlogs to file repo.dump:

  $ find .hg/store -name "*.i" | sort | xargs python $CONTRIBDIR/dumprevlog > ../repo.dump
  $ cd ..

Undumping into repo-b:

  $ hg init repo-b
  $ cd repo-b
  $ python $CONTRIBDIR/undumprevlog < ../repo.dump
  .hg/store/00changelog.i
  .hg/store/00manifest.i
  .hg/store/data/a.i
  $ cd ..

Rebuild fncache with clone --pull:

  $ hg clone --pull -U repo-b repo-c
  requesting all changes
  adding changesets
  adding manifests
  adding file changes
  added 3 changesets with 3 changes to 1 files

Verify:

  $ hg -R repo-c verify
  checking changesets
  checking manifests
  crosschecking files in changesets and manifests
  checking files
  1 files, 3 changesets, 3 total revisions

Compare repos:

  $ hg -R repo-c incoming repo-a
  comparing with repo-a
  searching for changes
  no changes found
  [1]

  $ hg -R repo-a incoming repo-c
  comparing with repo-c
  searching for changes
  no changes found
  [1]


Test shrink-revlog:
  $ cd repo-a
  $ hg --config extensions.shrink=$CONTRIBDIR/shrink-revlog.py shrink
  shrinking $TESTTMP/repo-a/.hg/store/00manifest.i
  reading revs
  sorting revs
  writing revs
  old file size:          324 bytes (   0.0 MiB)
  new file size:          324 bytes (   0.0 MiB)
  shrinkage: 0.0% (1.0x)
  note: old revlog saved in:
    $TESTTMP/repo-a/.hg/store/00manifest.i.old
    $TESTTMP/repo-a/.hg/store/00manifest.d.old
  (You can delete those files when you are satisfied that your
  repository is still sane.  Running 'hg verify' is strongly recommended.)
  $ hg verify
  checking changesets
  checking manifests
  crosschecking files in changesets and manifests
  checking files
  1 files, 3 changesets, 3 total revisions
  $ cd ..

Test simplemerge command:

  $ cp "$CONTRIBDIR/simplemerge" .
  $ echo base > base
  $ echo local > local
  $ cat base >> local
  $ cp local orig
  $ cat base > other
  $ echo other >> other

changing local directly

  $ python simplemerge local base other && echo "merge succeeded"
  merge succeeded
  $ cat local
  local
  base
  other
  $ cp orig local

printing to stdout

  $ python simplemerge -p local base other
  local
  base
  other

local:

  $ cat local
  local
  base

conflicts

  $ cp base conflict-local
  $ cp other conflict-other
  $ echo not other >> conflict-local
  $ echo end >> conflict-local
  $ echo end >> conflict-other
  $ python simplemerge -p conflict-local base conflict-other
  base
  <<<<<<< conflict-local
  not other
  =======
  other
  >>>>>>> conflict-other
  end
  warning: conflicts during merge.
  [1]

--no-minimal

  $ python simplemerge -p --no-minimal conflict-local base conflict-other
  base
  <<<<<<< conflict-local
  not other
  end
  =======
  other
  end
  >>>>>>> conflict-other
  warning: conflicts during merge.
  [1]

1 label

  $ python simplemerge -p -L foo conflict-local base conflict-other
  base
  <<<<<<< foo
  not other
  =======
  other
  >>>>>>> conflict-other
  end
  warning: conflicts during merge.
  [1]

2 labels

  $ python simplemerge -p -L foo -L bar conflict-local base conflict-other
  base
  <<<<<<< foo
  not other
  =======
  other
  >>>>>>> bar
  end
  warning: conflicts during merge.
  [1]

too many labels

  $ python simplemerge -p -L foo -L bar -L baz conflict-local base conflict-other
  abort: can only specify two labels.
  [255]

binary file

  $ python -c "f = file('binary-local', 'w'); f.write('\x00'); f.close()"
  $ cat orig >> binary-local
  $ python simplemerge -p binary-local base other
  warning: binary-local looks like a binary file.
  [1]

binary file --text

  $ python simplemerge -a -p binary-local base other 2>&1
  warning: binary-local looks like a binary file.
  \x00local (esc)
  base
  other

help

  $ python simplemerge --help
  simplemerge [OPTS] LOCAL BASE OTHER
  
      Simple three-way file merge utility with a minimal feature set.
  
      Apply to LOCAL the changes necessary to go from BASE to OTHER.
  
      By default, LOCAL is overwritten with the results of this operation.
  
  options:
   -L --label       labels to use on conflict markers
   -a --text        treat all files as text
   -p --print       print results instead of overwriting LOCAL
      --no-minimal  do not try to minimize conflict regions
   -h --help        display help and exit
   -q --quiet       suppress output

wrong number of arguments

  $ python simplemerge
  simplemerge: wrong number of arguments
  simplemerge [OPTS] LOCAL BASE OTHER
  
      Simple three-way file merge utility with a minimal feature set.
  
      Apply to LOCAL the changes necessary to go from BASE to OTHER.
  
      By default, LOCAL is overwritten with the results of this operation.
  
  options:
   -L --label       labels to use on conflict markers
   -a --text        treat all files as text
   -p --print       print results instead of overwriting LOCAL
      --no-minimal  do not try to minimize conflict regions
   -h --help        display help and exit
   -q --quiet       suppress output
  [1]

bad option

  $ python simplemerge --foo -p local base other
  simplemerge: option --foo not recognized
  simplemerge [OPTS] LOCAL BASE OTHER
  
      Simple three-way file merge utility with a minimal feature set.
  
      Apply to LOCAL the changes necessary to go from BASE to OTHER.
  
      By default, LOCAL is overwritten with the results of this operation.
  
  options:
   -L --label       labels to use on conflict markers
   -a --text        treat all files as text
   -p --print       print results instead of overwriting LOCAL
      --no-minimal  do not try to minimize conflict regions
   -h --help        display help and exit
   -q --quiet       suppress output
  [1]