revlog: don't say "not found" on internal error
If index_node() returned NULL, then index_find_node() and and
nt_partialmatch() used to return -2 to signal that the node was not
found. However, we were passing in a revnum to index_node() that we
knew should exist, so the only reason it could return NULL was due to
some internal error or perhaps out of memory. Let's not use "not
found" for these cases. I suppose we never noticed this because these
error never happen in practice.
I think there are more places where we should error out instead of
reporting that the node was not found, but the cases mentioned above
were all I cared about right now (because using the same error code
for all failures simplified some future patches).
Differential Revision: https://phab.mercurial-scm.org/D3457
#require svn13
$ svnupanddisplay()
> {
> (
> cd $1;
> svn up -q;
> svn st -v | sed 's/ */ /g' | sort
> limit=''
> if [ $2 -gt 0 ]; then
> limit="--limit=$2"
> fi
> svn log --xml -v $limit | $PYTHON "$TESTDIR/svnxml.py"
> )
> }
$ cat >> $HGRCPATH <<EOF
> [extensions]
> convert =
> EOF
$ hg init a
Add
$ echo a > a/a
$ mkdir -p a/d1/d2
$ echo b > a/d1/d2/b
$ hg --cwd a ci -d '0 0' -A -m 'add a file'
adding a
adding d1/d2/b
Modify
$ svn-safe-append.py a a/a
$ hg --cwd a ci -d '1 0' -m 'modify a file'
$ hg --cwd a tip -q
1:e0e2b8a9156b
$ hg convert -d svn a
assuming destination a-hg
initializing svn repository 'a-hg'
initializing svn working copy 'a-hg-wc'
scanning source...
sorting...
converting...
1 add a file
0 modify a file
$ svnupanddisplay a-hg-wc 2
2 1 test d1
2 1 test d1/d2
2 1 test d1/d2/b
2 2 test .
2 2 test a
revision: 2
author: test
msg: modify a file
M /a
revision: 1
author: test
msg: add a file
A /a
A /d1
A /d1/d2
A /d1/d2/b
$ ls a a-hg-wc
a:
a
d1
a-hg-wc:
a
d1
$ cmp a/a a-hg-wc/a
Rename
$ hg --cwd a mv a b
$ hg --cwd a ci -d '2 0' -m 'rename a file'
$ hg --cwd a tip -q
2:eb5169441d43
$ hg convert -d svn a
assuming destination a-hg
initializing svn working copy 'a-hg-wc'
scanning source...
sorting...
converting...
0 rename a file
$ svnupanddisplay a-hg-wc 1
3 1 test d1
3 1 test d1/d2
3 1 test d1/d2/b
3 3 test .
3 3 test b
revision: 3
author: test
msg: rename a file
D /a
A /b (from /a@2)
$ ls a a-hg-wc
a:
b
d1
a-hg-wc:
b
d1
Copy
$ hg --cwd a cp b c
$ hg --cwd a ci -d '3 0' -m 'copy a file'
$ hg --cwd a tip -q
3:60effef6ab48
$ hg convert -d svn a
assuming destination a-hg
initializing svn working copy 'a-hg-wc'
scanning source...
sorting...
converting...
0 copy a file
$ svnupanddisplay a-hg-wc 1
4 1 test d1
4 1 test d1/d2
4 1 test d1/d2/b
4 3 test b
4 4 test .
4 4 test c
revision: 4
author: test
msg: copy a file
A /c (from /b@3)
$ ls a a-hg-wc
a:
b
c
d1
a-hg-wc:
b
c
d1
$ hg --cwd a rm b
Remove
$ hg --cwd a ci -d '4 0' -m 'remove a file'
$ hg --cwd a tip -q
4:87bbe3013fb6
$ hg convert -d svn a
assuming destination a-hg
initializing svn working copy 'a-hg-wc'
scanning source...
sorting...
converting...
0 remove a file
$ svnupanddisplay a-hg-wc 1
5 1 test d1
5 1 test d1/d2
5 1 test d1/d2/b
5 4 test c
5 5 test .
revision: 5
author: test
msg: remove a file
D /b
$ ls a a-hg-wc
a:
c
d1
a-hg-wc:
c
d1
Executable
#if execbit
$ chmod +x a/c
#else
$ echo fake >> a/c
#endif
$ hg --cwd a ci -d '5 0' -m 'make a file executable'
#if execbit
$ hg --cwd a tip -q
5:ff42e473c340
#else
$ hg --cwd a tip -q
5:817a700c8cf1
#endif
$ hg convert -d svn a
assuming destination a-hg
initializing svn working copy 'a-hg-wc'
scanning source...
sorting...
converting...
0 make a file executable
$ svnupanddisplay a-hg-wc 1
6 1 test d1
6 1 test d1/d2
6 1 test d1/d2/b
6 6 test .
6 6 test c
revision: 6
author: test
msg: make a file executable
M /c
#if execbit
$ test -x a-hg-wc/c
#endif
#if symlink
Symlinks
$ ln -s a/missing a/link
$ hg --cwd a commit -Am 'add symlink'
adding link
$ hg --cwd a mv link newlink
$ hg --cwd a commit -m 'move symlink'
$ hg convert -d svn a a-svnlink
initializing svn repository 'a-svnlink'
initializing svn working copy 'a-svnlink-wc'
scanning source...
sorting...
converting...
7 add a file
6 modify a file
5 rename a file
4 copy a file
3 remove a file
2 make a file executable
1 add symlink
0 move symlink
$ svnupanddisplay a-svnlink-wc 1
8 1 test d1
8 1 test d1/d2
8 1 test d1/d2/b
8 6 test c
8 8 test .
8 8 test newlink
revision: 8
author: test
msg: move symlink
D /link
A /newlink (from /link@7)
Make sure our changes don't affect the rest of the test cases
$ hg --cwd a up 5
0 files updated, 0 files merged, 1 files removed, 0 files unresolved
$ hg --cwd a --config extensions.strip= strip -r 6
saved backup bundle to $TESTTMP/a/.hg/strip-backup/bd4f7b7a7067-ed505e42-backup.hg
#endif
Convert with --full adds and removes files that didn't change
$ touch a/f
$ hg -R a ci -Aqmf
$ echo "rename c d" > filemap
$ hg convert -d svn a --filemap filemap --full
assuming destination a-hg
initializing svn working copy 'a-hg-wc'
scanning source...
sorting...
converting...
0 f
$ svnupanddisplay a-hg-wc 1
7 7 test .
7 7 test d
7 7 test f
revision: 7
author: test
msg: f
D /c
A /d
D /d1
A /f
$ rm -rf a a-hg a-hg-wc
Executable in new directory
$ hg init a
$ mkdir a/d1
$ echo a > a/d1/a
#if execbit
$ chmod +x a/d1/a
#else
$ echo fake >> a/d1/a
#endif
$ hg --cwd a ci -d '0 0' -A -m 'add executable file in new directory'
adding d1/a
$ hg convert -d svn a
assuming destination a-hg
initializing svn repository 'a-hg'
initializing svn working copy 'a-hg-wc'
scanning source...
sorting...
converting...
0 add executable file in new directory
$ svnupanddisplay a-hg-wc 1
1 1 test .
1 1 test d1
1 1 test d1/a
revision: 1
author: test
msg: add executable file in new directory
A /d1
A /d1/a
#if execbit
$ test -x a-hg-wc/d1/a
#endif
Copy to new directory
$ mkdir a/d2
$ hg --cwd a cp d1/a d2/a
$ hg --cwd a ci -d '1 0' -A -m 'copy file to new directory'
$ hg convert -d svn a
assuming destination a-hg
initializing svn working copy 'a-hg-wc'
scanning source...
sorting...
converting...
0 copy file to new directory
$ svnupanddisplay a-hg-wc 1
2 1 test d1
2 1 test d1/a
2 2 test .
2 2 test d2
2 2 test d2/a
revision: 2
author: test
msg: copy file to new directory
A /d2
A /d2/a (from /d1/a@1)
Branchy history
$ hg init b
$ echo base > b/b
$ hg --cwd b ci -d '0 0' -Ambase
adding b
$ svn-safe-append.py left-1 b/b
$ echo left-1 > b/left-1
$ hg --cwd b ci -d '1 0' -Amleft-1
adding left-1
$ svn-safe-append.py left-2 b/b
$ echo left-2 > b/left-2
$ hg --cwd b ci -d '2 0' -Amleft-2
adding left-2
$ hg --cwd b up 0
1 files updated, 0 files merged, 2 files removed, 0 files unresolved
$ svn-safe-append.py right-1 b/b
$ echo right-1 > b/right-1
$ hg --cwd b ci -d '3 0' -Amright-1
adding right-1
created new head
$ svn-safe-append.py right-2 b/b
$ echo right-2 > b/right-2
$ hg --cwd b ci -d '4 0' -Amright-2
adding right-2
$ hg --cwd b up -C 2
3 files updated, 0 files merged, 2 files removed, 0 files unresolved
$ hg --cwd b merge
merging b
warning: conflicts while merging b! (edit, then use 'hg resolve --mark')
2 files updated, 0 files merged, 0 files removed, 1 files unresolved
use 'hg resolve' to retry unresolved file merges or 'hg merge --abort' to abandon
[1]
$ hg --cwd b revert -r 2 b
$ hg --cwd b resolve -m b
(no more unresolved files)
$ hg --cwd b ci -d '5 0' -m 'merge'
Expect 4 changes
$ hg convert -d svn b
assuming destination b-hg
initializing svn repository 'b-hg'
initializing svn working copy 'b-hg-wc'
scanning source...
sorting...
converting...
5 base
4 left-1
3 left-2
2 right-1
1 right-2
0 merge
$ svnupanddisplay b-hg-wc 0
4 2 test left-1
4 3 test b
4 3 test left-2
4 4 test .
4 4 test right-1
4 4 test right-2
revision: 4
author: test
msg: merge
A /right-1
A /right-2
revision: 3
author: test
msg: left-2
M /b
A /left-2
revision: 2
author: test
msg: left-1
M /b
A /left-1
revision: 1
author: test
msg: base
A /b
Tags are not supported, but must not break conversion
$ rm -rf a a-hg a-hg-wc
$ hg init a
$ echo a > a/a
$ hg --cwd a ci -d '0 0' -A -m 'Add file a'
adding a
$ hg --cwd a tag -d '1 0' -m 'Tagged as v1.0' v1.0
$ hg convert -d svn a
assuming destination a-hg
initializing svn repository 'a-hg'
initializing svn working copy 'a-hg-wc'
scanning source...
sorting...
converting...
1 Add file a
0 Tagged as v1.0
writing Subversion tags is not yet implemented
$ svnupanddisplay a-hg-wc 2
2 1 test a
2 2 test .
2 2 test .hgtags
revision: 2
author: test
msg: Tagged as v1.0
A /.hgtags
revision: 1
author: test
msg: Add file a
A /a
$ rm -rf a a-hg a-hg-wc