copies-rust: use simpler overwrite when value on both side are identical
If the value are the same, their "overwritten" set is the same and we don't need
to combine them.
It helps our slower cases
Repo Case Source-Rev Dest-Rev # of revisions old time new time Difference Factor time per rev
---------------------------------------------------------------------------------------------------------------------------------------------------------------
mozilla-try x00000_revs_x00000_added_x0000_copies
1b661134e2ca 1ae03d022d6d : 228985 revs, 86.722016 s, 80.828689 s, -5.893327 s, × 0.9320, 352 µs/rev
mozilla-try x00000_revs_x00000_added_x000_copies
9b2a99adc05e 8e29777b48e6 : 382065 revs, 35.113727 s, 34.094064 s, -1.019663 s, × 0.9710, 89 µs/rev
Full comparison with the previous revision below:
Repo Case Source-Rev Dest-Rev # of revisions old time new time Difference Factor time per rev
---------------------------------------------------------------------------------------------------------------------------------------------------------------
mercurial x_revs_x_added_0_copies
ad6b123de1c7 39cfcef4f463 : 1 revs, 0.000043 s, 0.000043 s, +0.000000 s, × 1.0000, 43 µs/rev
mercurial x_revs_x_added_x_copies
2b1c78674230 0c1d10351869 : 6 revs, 0.000114 s, 0.000114 s, +0.000000 s, × 1.0000, 19 µs/rev
mercurial x000_revs_x000_added_x_copies
81f8ff2a9bf2 dd3267698d84 : 1032 revs, 0.004899 s, 0.004899 s, +0.000000 s, × 1.0000, 4 µs/rev
pypy x_revs_x_added_0_copies
aed021ee8ae8 099ed31b181b : 9 revs, 0.000196 s, 0.000196 s, +0.000000 s, × 1.0000, 21 µs/rev
pypy x_revs_x000_added_0_copies
4aa4e1f8e19a 359343b9ac0e : 1 revs, 0.000050 s, 0.000049 s, -0.000001 s, × 0.9800, 49 µs/rev
pypy x_revs_x_added_x_copies
ac52eb7bbbb0 72e022663155 : 7 revs, 0.000125 s, 0.000117 s, -0.000008 s, × 0.9360, 16 µs/rev
pypy x_revs_x00_added_x_copies
c3b14617fbd7 ace7255d9a26 : 1 revs, 0.000321 s, 0.6f1f4a s, +0.000001 s, × 1.0031, 322 µs/rev
pypy x_revs_x000_added_x000_copies
df6f7a526b60 a83dc6a2d56f : 6 revs, 0.011948 s, 0.011856 s, -0.000092 s, × 0.9923, 1976 µs/rev
pypy x000_revs_xx00_added_0_copies
89a76aede314 2f22446ff07e : 4785 revs, 0.051267 s, 0.050992 s, -0.000275 s, × 0.9946, 10 µs/rev
pypy x000_revs_x000_added_x_copies
8a3b5bfd266e 2c68e87c3efe : 6780 revs, 0.087755 s, 0.087444 s, -0.000311 s, × 0.9965, 12 µs/rev
pypy x000_revs_x000_added_x000_copies
89a76aede314 7b3dda341c84 : 5441 revs, 0.061818 s, 0.062487 s, +0.000669 s, × 1.0108, 11 µs/rev
pypy x0000_revs_x_added_0_copies
d1defd0dc478 c9cb1334cc78 : 43645 revs, 0.634253 s, 0.634909 s, +0.000656 s, × 1.0010, 14 µs/rev
pypy x0000_revs_xx000_added_0_copies
bf2c629d0071 4ffed77c095c : 2 revs, 0.013179 s, 0.013360 s, +0.000181 s, × 1.0137, 6680 µs/rev
pypy x0000_revs_xx000_added_x000_copies
08ea3258278e d9fa043f30c0 : 11316 revs, 0.119643 s, 0.120775 s, +0.001132 s, × 1.0095, 10 µs/rev
netbeans x_revs_x_added_0_copies
fb0955ffcbcd a01e9239f9e7 : 2 revs, 0.000085 s, 0.000085 s, +0.000000 s, × 1.0000, 42 µs/rev
netbeans x_revs_x000_added_0_copies
6f360122949f 20eb231cc7d0 : 2 revs, 0.000107 s, 0.000108 s, +0.000001 s, × 1.0093, 54 µs/rev
netbeans x_revs_x_added_x_copies
1ada3faf6fb6 5a39d12eecf4 : 3 revs, 0.000176 s, 0.000176 s, +0.000000 s, × 1.0000, 58 µs/rev
netbeans x_revs_x00_added_x_copies
35be93ba1e2c 9eec5e90c05f : 9 revs, 0.000743 s, 0.000747 s, +0.000004 s, × 1.0054, 83 µs/rev
netbeans x000_revs_xx00_added_0_copies
eac3045b4fdd 51d4ae7f1290 : 1421 revs, 0.010246 s, 0.010128 s, -0.000118 s, × 0.9885, 7 µs/rev
netbeans x000_revs_x000_added_x_copies
e2063d266acd 6081d72689dc : 1533 revs, 0.015853 s, 0.015899 s, +0.000046 s, × 1.0029, 10 µs/rev
netbeans x000_revs_x000_added_x000_copies
ff453e9fee32 411350406ec2 : 5750 revs, 0.062971 s, 0.062215 s, -0.000756 s, × 0.9880, 10 µs/rev
netbeans x0000_revs_xx000_added_x000_copies
588c2d1ced70 1aad62e59ddd : 66949 revs, 0.518337 s, 0.521004 s, +0.002667 s, × 1.0051, 7 µs/rev
mozilla-central x_revs_x_added_0_copies
3697f962bb7b 7015fcdd43a2 : 2 revs, 0.000090 s, 0.000090 s, +0.000000 s, × 1.0000, 45 µs/rev
mozilla-central x_revs_x000_added_0_copies
dd390860c6c9 40d0c5bed75d : 8 revs, 0.000268 s, 0.000264 s, -0.000004 s, × 0.9851, 33 µs/rev
mozilla-central x_revs_x_added_x_copies
8d198483ae3b 14207ffc2b2f : 9 revs, 0.000187 s, 0.000186 s, -0.000001 s, × 0.9947, 20 µs/rev
mozilla-central x_revs_x00_added_x_copies
98cbc58cc6bc 446a150332c3 : 7 revs, 0.000661 s, 0.000660 s, -0.000001 s, × 0.9985, 94 µs/rev
mozilla-central x_revs_x000_added_x000_copies
3c684b4b8f68 0a5e72d1b479 : 3 revs, 0.003494 s, 0.003542 s, +0.000048 s, × 1.0137, 1180 µs/rev
mozilla-central x_revs_x0000_added_x0000_copies
effb563bb7e5 c07a39dc4e80 : 6 revs, 0.070509 s, 0.071574 s, +0.001065 s, × 1.0151, 11929 µs/rev
mozilla-central x000_revs_xx00_added_0_copies
6100d773079a 04a55431795e : 1593 revs, 0.006489 s, 0.006498 s, +0.000009 s, × 1.0014, 4 µs/rev
mozilla-central x000_revs_x000_added_x_copies
9f17a6fc04f9 2d37b966abed : 41 revs, 0.005070 s, 0.005206 s, +0.000136 s, × 1.0268, 126 µs/rev
mozilla-central x000_revs_x000_added_x000_copies
7c97034feb78 4407bd0c6330 : 7839 revs, 0.065241 s, 0.065535 s, +0.000294 s, × 1.0045, 8 µs/rev
mozilla-central x0000_revs_xx000_added_0_copies
9eec5917337d 67118cc6dcad : 615 revs, 0.027284 s, 0.027139 s, -0.000145 s, × 0.9947, 44 µs/rev
mozilla-central x0000_revs_xx000_added_x000_copies
f78c615a656c 96a38b690156 : 30263 revs, 0.203671 s, 0.201924 s, -0.001747 s, × 0.9914, 6 µs/rev
mozilla-central x00000_revs_x0000_added_x0000_copies
6832ae71433c 4c222a1d9a00 : 153721 revs, 1.239373 s, 1.257201 s, +0.017828 s, × 1.0144, 8 µs/rev
mozilla-central x00000_revs_x00000_added_x000_copies
76caed42cf7c 1daa622bbe42 : 204976 revs, 1.649803 s, 1.663045 s, +0.013242 s, × 1.0080, 8 µs/rev
mozilla-try x_revs_x_added_0_copies
aaf6dde0deb8 9790f499805a : 2 revs, 0.000868 s, 0.000866 s, -0.000002 s, × 0.9977, 433 µs/rev
mozilla-try x_revs_x000_added_0_copies
d8d0222927b4 5bb8ce8c7450 : 2 revs, 0.000885 s, 0.000883 s, -0.000002 s, × 0.9977, 441 µs/rev
mozilla-try x_revs_x_added_x_copies
092fcca11bdb 936255a0384a : 4 revs, 0.000165 s, 0.000163 s, -0.000002 s, × 0.9879, 40 µs/rev
mozilla-try x_revs_x00_added_x_copies
b53d2fadbdb5 017afae788ec : 2 revs, 0.001147 s, 0.001139 s, -0.000008 s, × 0.9930, 569 µs/rev
mozilla-try x_revs_x000_added_x000_copies
20408ad61ce5 6f0ee96e21ad : 1 revs, 0.032885 s, 0.032753 s, -0.000132 s, × 0.9960, 32752 µs/rev
mozilla-try x_revs_x0000_added_x0000_copies
effb563bb7e5 c07a39dc4e80 : 6 revs, 0.071304 s, 0.073266 s, +0.001962 s, × 1.0275, 12211 µs/rev
mozilla-try x000_revs_xx00_added_0_copies
6100d773079a 04a55431795e : 1593 revs, 0.006506 s, 0.006567 s, +0.000061 s, × 1.0094, 4 µs/rev
mozilla-try x000_revs_x000_added_x_copies
9f17a6fc04f9 2d37b966abed : 41 revs, 0.005486 s, 0.005427 s, -0.000059 s, × 0.9892, 132 µs/rev
mozilla-try x000_revs_x000_added_x000_copies
1346fd0130e4 4c65cbdabc1f : 6657 revs, 0.064677 s, 0.064058 s, -0.000619 s, × 0.9904, 9 µs/rev
mozilla-try x0000_revs_x_added_0_copies
63519bfd42ee a36a2a865d92 : 40314 revs, 0.306000 s, 0.303320 s, -0.002680 s, × 0.9912, 7 µs/rev
mozilla-try x0000_revs_x_added_x_copies
9fe69ff0762d bcabf2a78927 : 38690 revs, 0.288217 s, 0.288456 s, +0.000239 s, × 1.0008, 7 µs/rev
mozilla-try x0000_revs_xx000_added_x_copies
156f6e2674f2 4d0f2c178e66 : 8598 revs, 0.086117 s, 0.085925 s, -0.000192 s, × 0.9978, 9 µs/rev
mozilla-try x0000_revs_xx000_added_0_copies
9eec5917337d 67118cc6dcad : 615 revs, 0.027512 s, 0.027302 s, -0.000210 s, × 0.9924, 44 µs/rev
mozilla-try x0000_revs_xx000_added_x000_copies
89294cd501d9 7ccb2fc7ccb5 : 97052 revs, 1.998239 s, 2.034596 s, +0.036357 s, × 1.0182, 20 µs/rev
mozilla-try x0000_revs_x0000_added_x0000_copies
e928c65095ed e951f4ad123a : 52031 revs, 0.688201 s, 0.694030 s, +0.005829 s, × 1.0085, 13 µs/rev
mozilla-try x00000_revs_x_added_0_copies
6a320851d377 1ebb79acd503 : 363753 revs, 4.389428 s, 4.407723 s, +0.018295 s, × 1.0042, 12 µs/rev
mozilla-try x00000_revs_x00000_added_0_copies
dc8a3ca7010e d16fde900c9c : 34414 revs, 0.578736 s, 0.574355 s, -0.004381 s, × 0.9924, 16 µs/rev
mozilla-try x00000_revs_x_added_x_copies
5173c4b6f97c 95d83ee7242d : 362229 revs, 4.363599 s, 4.457827 s, +0.094228 s, × 1.0216, 12 µs/rev
mozilla-try x00000_revs_x000_added_x_copies
9126823d0e9c ca82787bb23c : 359344 revs, 4.324129 s, 4.351696 s, +0.027567 s, × 1.0064, 12 µs/rev
mozilla-try x00000_revs_x0000_added_x0000_copies
8d3fafa80d4b eb884023b810 : 192665 revs, 1.565727 s, 1.570065 s, +0.004338 s, × 1.0028, 8 µs/rev
mozilla-try x00000_revs_x00000_added_x0000_copies
1b661134e2ca 1ae03d022d6d : 228985 revs, 86.722016 s, 80.828689 s, -5.893327 s, × 0.9320, 352 µs/rev
mozilla-try x00000_revs_x00000_added_x000_copies
9b2a99adc05e 8e29777b48e6 : 382065 revs, 35.113727 s, 34.094064 s, -1.019663 s, × 0.9710, 89 µs/rev
private : 459513 revs, 27.397070 s, 27.435529 s, +0.038459 s, × 1.0014, 59 µs/rev
Differential Revision: https://phab.mercurial-scm.org/D9655
#require no-chg
$ cat > hgrc-sshv2 << EOF
> %include $HGRCPATH
> [experimental]
> sshpeer.advertise-v2 = true
> sshserver.support-v2 = true
> EOF
Helper function to run protocol tests against multiple protocol versions.
This is easier than using #testcases because managing differences between
protocols with inline conditional output is hard to read.
$ debugwireproto() {
> commands=`cat -`
> echo 'testing ssh1'
> echo "${commands}" | hg --verbose debugwireproto --localssh
> echo ""
> echo 'testing ssh2'
> echo "${commands}" | HGRCPATH=$TESTTMP/hgrc-sshv2 hg --verbose debugwireproto --localssh
> }
$ cat >> $HGRCPATH << EOF
> [ui]
> ssh = "$PYTHON" "$TESTDIR/dummyssh"
> [devel]
> debug.peer-request = true
> [extensions]
> sshprotoext = $TESTDIR/sshprotoext.py
> EOF
$ hg init server
$ cd server
$ echo 0 > foo
$ hg -q add foo
$ hg commit -m initial
A no-op connection performs a handshake
$ hg debugwireproto --localssh << EOF
> EOF
creating ssh peer from handshake results
Raw peers don't perform any activity
$ hg debugwireproto --localssh --peer raw << EOF
> EOF
using raw connection to peer
$ hg debugwireproto --localssh --peer ssh1 << EOF
> EOF
creating ssh peer for wire protocol version 1
$ hg debugwireproto --localssh --peer ssh2 << EOF
> EOF
creating ssh peer for wire protocol version 2
Test a normal behaving server, for sanity
$ cd ..
$ hg --debug debugpeer ssh://user@dummy/server
running * "*/tests/dummyssh" 'user@dummy' 'hg -R server serve --stdio' (glob) (no-windows !)
running * "*\tests/dummyssh" "user@dummy" "hg -R server serve --stdio" (glob) (windows !)
devel-peer-request: hello+between
devel-peer-request: pairs: 81 bytes
sending hello command
sending between command
remote: 463
remote: capabilities: batch branchmap $USUAL_BUNDLE2_CAPS$ changegroupsubset getbundle known lookup protocaps pushkey streamreqs=generaldelta,revlogv1,sparserevlog unbundle=HG10GZ,HG10BZ,HG10UN unbundlehash
remote: 1
devel-peer-request: protocaps
devel-peer-request: caps: * bytes (glob)
sending protocaps command
url: ssh://user@dummy/server
local: no
pushable: yes
Server should answer the "hello" command in isolation
$ hg -R server debugwireproto --localssh --peer raw << EOF
> raw
> hello\n
> readline
> readline
> EOF
using raw connection to peer
i> write(6) -> 6:
i> hello\n
o> readline() -> 4:
o> 463\n
o> readline() -> 463:
o> capabilities: batch branchmap $USUAL_BUNDLE2_CAPS$ changegroupsubset getbundle known lookup protocaps pushkey streamreqs=generaldelta,revlogv1,sparserevlog unbundle=HG10GZ,HG10BZ,HG10UN unbundlehash\n
`hg debugserve --sshstdio` works
$ cd server
$ hg debugserve --sshstdio << EOF
> hello
> EOF
463
capabilities: batch branchmap $USUAL_BUNDLE2_CAPS$ changegroupsubset getbundle known lookup protocaps pushkey streamreqs=generaldelta,revlogv1,sparserevlog unbundle=HG10GZ,HG10BZ,HG10UN unbundlehash
I/O logging works
$ hg debugserve --sshstdio --logiofd 1 << EOF
> hello
> EOF
e> flush() -> None
o> write(4) -> 4:
o> 463\n
o> write(463) -> 463:
o> capabilities: batch branchmap $USUAL_BUNDLE2_CAPS$ changegroupsubset getbundle known lookup protocaps pushkey streamreqs=generaldelta,revlogv1,sparserevlog unbundle=HG10GZ,HG10BZ,HG10UN unbundlehash\n
463
capabilities: batch branchmap $USUAL_BUNDLE2_CAPS$ changegroupsubset getbundle known lookup protocaps pushkey streamreqs=generaldelta,revlogv1,sparserevlog unbundle=HG10GZ,HG10BZ,HG10UN unbundlehash
o> flush() -> None
$ hg debugserve --sshstdio --logiofile $TESTTMP/io << EOF
> hello
> EOF
463
capabilities: batch branchmap $USUAL_BUNDLE2_CAPS$ changegroupsubset getbundle known lookup protocaps pushkey streamreqs=generaldelta,revlogv1,sparserevlog unbundle=HG10GZ,HG10BZ,HG10UN unbundlehash
$ cat $TESTTMP/io
e> flush() -> None
o> write(4) -> 4:
o> 463\n
o> write(463) -> 463:
o> capabilities: batch branchmap $USUAL_BUNDLE2_CAPS$ changegroupsubset getbundle known lookup protocaps pushkey streamreqs=generaldelta,revlogv1,sparserevlog unbundle=HG10GZ,HG10BZ,HG10UN unbundlehash\n
o> flush() -> None
$ cd ..
>=0.9.1 clients send a "hello" + "between" for the null range as part of handshake.
Server should reply with capabilities and should send "1\n\n" as a successful
reply with empty response to the "between".
$ hg -R server debugwireproto --localssh --peer raw << EOF
> raw
> hello\n
> readline
> readline
> raw
> between\n
> pairs 81\n
> 0000000000000000000000000000000000000000-0000000000000000000000000000000000000000
> readline
> readline
> EOF
using raw connection to peer
i> write(6) -> 6:
i> hello\n
o> readline() -> 4:
o> 463\n
o> readline() -> 463:
o> capabilities: batch branchmap $USUAL_BUNDLE2_CAPS$ changegroupsubset getbundle known lookup protocaps pushkey streamreqs=generaldelta,revlogv1,sparserevlog unbundle=HG10GZ,HG10BZ,HG10UN unbundlehash\n
i> write(98) -> 98:
i> between\n
i> pairs 81\n
i> 0000000000000000000000000000000000000000-0000000000000000000000000000000000000000
o> readline() -> 2:
o> 1\n
o> readline() -> 1:
o> \n
SSH banner is not printed by default, ignored by clients
$ SSHSERVERMODE=banner hg debugpeer ssh://user@dummy/server
url: ssh://user@dummy/server
local: no
pushable: yes
--debug will print the banner
$ SSHSERVERMODE=banner hg --debug debugpeer ssh://user@dummy/server
running * "*/tests/dummyssh" 'user@dummy' 'hg -R server serve --stdio' (glob) (no-windows !)
running * "*\tests/dummyssh" "user@dummy" "hg -R server serve --stdio" (glob) (windows !)
devel-peer-request: hello+between
devel-peer-request: pairs: 81 bytes
sending hello command
sending between command
remote: banner: line 0
remote: banner: line 1
remote: banner: line 2
remote: banner: line 3
remote: banner: line 4
remote: banner: line 5
remote: banner: line 6
remote: banner: line 7
remote: banner: line 8
remote: banner: line 9
remote: 463
remote: capabilities: batch branchmap $USUAL_BUNDLE2_CAPS$ changegroupsubset getbundle known lookup protocaps pushkey streamreqs=generaldelta,revlogv1,sparserevlog unbundle=HG10GZ,HG10BZ,HG10UN unbundlehash
remote: 1
devel-peer-request: protocaps
devel-peer-request: caps: * bytes (glob)
sending protocaps command
url: ssh://user@dummy/server
local: no
pushable: yes
And test the banner with the raw protocol
$ SSHSERVERMODE=banner hg -R server debugwireproto --localssh --peer raw << EOF
> raw
> hello\n
> readline
> readline
> readline
> readline
> readline
> readline
> readline
> readline
> readline
> readline
> readline
> readline
> raw
> between\n
> pairs 81\n
> 0000000000000000000000000000000000000000-0000000000000000000000000000000000000000
> readline
> readline
> EOF
using raw connection to peer
i> write(6) -> 6:
i> hello\n
o> readline() -> 15:
o> banner: line 0\n
o> readline() -> 15:
o> banner: line 1\n
o> readline() -> 15:
o> banner: line 2\n
o> readline() -> 15:
o> banner: line 3\n
o> readline() -> 15:
o> banner: line 4\n
o> readline() -> 15:
o> banner: line 5\n
o> readline() -> 15:
o> banner: line 6\n
o> readline() -> 15:
o> banner: line 7\n
o> readline() -> 15:
o> banner: line 8\n
o> readline() -> 15:
o> banner: line 9\n
o> readline() -> 4:
o> 463\n
o> readline() -> 463:
o> capabilities: batch branchmap $USUAL_BUNDLE2_CAPS$ changegroupsubset getbundle known lookup protocaps pushkey streamreqs=generaldelta,revlogv1,sparserevlog unbundle=HG10GZ,HG10BZ,HG10UN unbundlehash\n
i> write(98) -> 98:
i> between\n
i> pairs 81\n
i> 0000000000000000000000000000000000000000-0000000000000000000000000000000000000000
o> readline() -> 2:
o> 1\n
o> readline() -> 1:
o> \n
Connecting to a <0.9.1 server that doesn't support the hello command.
The client should refuse, as we dropped support for connecting to such
servers.
$ SSHSERVERMODE=no-hello hg --debug debugpeer ssh://user@dummy/server
running * "*/tests/dummyssh" 'user@dummy' 'hg -R server serve --stdio' (glob) (no-windows !)
running * "*\tests/dummyssh" "user@dummy" "hg -R server serve --stdio" (glob) (windows !)
devel-peer-request: hello+between
devel-peer-request: pairs: 81 bytes
sending hello command
sending between command
remote: 0
remote: 1
abort: no suitable response from remote hg
[255]
Sending an unknown command to the server results in an empty response to that command
$ hg -R server debugwireproto --localssh --peer raw << EOF
> raw
> pre-hello\n
> readline
> raw
> hello\n
> readline
> raw
> between\n
> pairs 81\n
> 0000000000000000000000000000000000000000-0000000000000000000000000000000000000000
> readline
> readline
> EOF
using raw connection to peer
i> write(10) -> 10:
i> pre-hello\n
o> readline() -> 2:
o> 0\n
i> write(6) -> 6:
i> hello\n
o> readline() -> 4:
o> 463\n
i> write(98) -> 98:
i> between\n
i> pairs 81\n
i> 0000000000000000000000000000000000000000-0000000000000000000000000000000000000000
o> readline() -> 463:
o> capabilities: batch branchmap $USUAL_BUNDLE2_CAPS$ changegroupsubset getbundle known lookup protocaps pushkey streamreqs=generaldelta,revlogv1,sparserevlog unbundle=HG10GZ,HG10BZ,HG10UN unbundlehash\n
o> readline() -> 2:
o> 1\n
$ hg --config sshpeer.mode=extra-handshake-commands --config sshpeer.handshake-mode=pre-no-args --debug debugpeer ssh://user@dummy/server
running * "*/tests/dummyssh" 'user@dummy' 'hg -R server serve --stdio' (glob) (no-windows !)
running * "*\tests/dummyssh" "user@dummy" "hg -R server serve --stdio" (glob) (windows !)
sending no-args command
devel-peer-request: hello+between
devel-peer-request: pairs: 81 bytes
sending hello command
sending between command
remote: 0
remote: 463
remote: capabilities: batch branchmap $USUAL_BUNDLE2_CAPS$ changegroupsubset getbundle known lookup protocaps pushkey streamreqs=generaldelta,revlogv1,sparserevlog unbundle=HG10GZ,HG10BZ,HG10UN unbundlehash
remote: 1
devel-peer-request: protocaps
devel-peer-request: caps: * bytes (glob)
sending protocaps command
url: ssh://user@dummy/server
local: no
pushable: yes
Send multiple unknown commands before hello
$ hg -R server debugwireproto --localssh --peer raw << EOF
> raw
> unknown1\n
> readline
> raw
> unknown2\n
> readline
> raw
> unknown3\n
> readline
> raw
> hello\n
> readline
> readline
> raw
> between\n
> pairs 81\n
> 0000000000000000000000000000000000000000-0000000000000000000000000000000000000000
> readline
> readline
> EOF
using raw connection to peer
i> write(9) -> 9:
i> unknown1\n
o> readline() -> 2:
o> 0\n
i> write(9) -> 9:
i> unknown2\n
o> readline() -> 2:
o> 0\n
i> write(9) -> 9:
i> unknown3\n
o> readline() -> 2:
o> 0\n
i> write(6) -> 6:
i> hello\n
o> readline() -> 4:
o> 463\n
o> readline() -> 463:
o> capabilities: batch branchmap $USUAL_BUNDLE2_CAPS$ changegroupsubset getbundle known lookup protocaps pushkey streamreqs=generaldelta,revlogv1,sparserevlog unbundle=HG10GZ,HG10BZ,HG10UN unbundlehash\n
i> write(98) -> 98:
i> between\n
i> pairs 81\n
i> 0000000000000000000000000000000000000000-0000000000000000000000000000000000000000
o> readline() -> 2:
o> 1\n
o> readline() -> 1:
o> \n
$ hg --config sshpeer.mode=extra-handshake-commands --config sshpeer.handshake-mode=pre-multiple-no-args --debug debugpeer ssh://user@dummy/server
running * "*/tests/dummyssh" 'user@dummy' 'hg -R server serve --stdio' (glob) (no-windows !)
running * "*\tests/dummyssh" "user@dummy" "hg -R server serve --stdio" (glob) (windows !)
sending unknown1 command
sending unknown2 command
sending unknown3 command
devel-peer-request: hello+between
devel-peer-request: pairs: 81 bytes
sending hello command
sending between command
remote: 0
remote: 0
remote: 0
remote: 463
remote: capabilities: batch branchmap $USUAL_BUNDLE2_CAPS$ changegroupsubset getbundle known lookup protocaps pushkey streamreqs=generaldelta,revlogv1,sparserevlog unbundle=HG10GZ,HG10BZ,HG10UN unbundlehash
remote: 1
devel-peer-request: protocaps
devel-peer-request: caps: * bytes (glob)
sending protocaps command
url: ssh://user@dummy/server
local: no
pushable: yes
Send an unknown command before hello that has arguments
$ cd server
$ hg debugwireproto --localssh --peer raw << EOF
> raw
> with-args\n
> foo 13\n
> value for foo\n
> bar 13\n
> value for bar\n
> readline
> readline
> readline
> readline
> readline
> raw
> hello\n
> readline
> readline
> raw
> between\n
> pairs 81\n
> 0000000000000000000000000000000000000000-0000000000000000000000000000000000000000
> readline
> readline
> EOF
using raw connection to peer
i> write(52) -> 52:
i> with-args\n
i> foo 13\n
i> value for foo\n
i> bar 13\n
i> value for bar\n
o> readline() -> 2:
o> 0\n
o> readline() -> 2:
o> 0\n
o> readline() -> 2:
o> 0\n
o> readline() -> 2:
o> 0\n
o> readline() -> 2:
o> 0\n
i> write(6) -> 6:
i> hello\n
o> readline() -> 4:
o> 463\n
o> readline() -> 463:
o> capabilities: batch branchmap $USUAL_BUNDLE2_CAPS$ changegroupsubset getbundle known lookup protocaps pushkey streamreqs=generaldelta,revlogv1,sparserevlog unbundle=HG10GZ,HG10BZ,HG10UN unbundlehash\n
i> write(98) -> 98:
i> between\n
i> pairs 81\n
i> 0000000000000000000000000000000000000000-0000000000000000000000000000000000000000
o> readline() -> 2:
o> 1\n
o> readline() -> 1:
o> \n
Send an unknown command having an argument that looks numeric
$ hg debugwireproto --localssh --peer raw << EOF
> raw
> unknown\n
> foo 1\n
> 0\n
> readline
> readline
> readline
> raw
> hello\n
> readline
> readline
> raw
> between\n
> pairs 81\n
> 0000000000000000000000000000000000000000-0000000000000000000000000000000000000000
> readline
> readline
> EOF
using raw connection to peer
i> write(16) -> 16:
i> unknown\n
i> foo 1\n
i> 0\n
o> readline() -> 2:
o> 0\n
o> readline() -> 2:
o> 0\n
o> readline() -> 2:
o> 0\n
i> write(6) -> 6:
i> hello\n
o> readline() -> 4:
o> 463\n
o> readline() -> 463:
o> capabilities: batch branchmap $USUAL_BUNDLE2_CAPS$ changegroupsubset getbundle known lookup protocaps pushkey streamreqs=generaldelta,revlogv1,sparserevlog unbundle=HG10GZ,HG10BZ,HG10UN unbundlehash\n
i> write(98) -> 98:
i> between\n
i> pairs 81\n
i> 0000000000000000000000000000000000000000-0000000000000000000000000000000000000000
o> readline() -> 2:
o> 1\n
o> readline() -> 1:
o> \n
$ hg debugwireproto --localssh --peer raw << EOF
> raw
> unknown\n
> foo 1\n
> 1\n
> readline
> readline
> readline
> raw
> hello\n
> readline
> readline
> raw
> between\n
> pairs 81\n
> 0000000000000000000000000000000000000000-0000000000000000000000000000000000000000
> readline
> readline
> EOF
using raw connection to peer
i> write(16) -> 16:
i> unknown\n
i> foo 1\n
i> 1\n
o> readline() -> 2:
o> 0\n
o> readline() -> 2:
o> 0\n
o> readline() -> 2:
o> 0\n
i> write(6) -> 6:
i> hello\n
o> readline() -> 4:
o> 463\n
o> readline() -> 463:
o> capabilities: batch branchmap $USUAL_BUNDLE2_CAPS$ changegroupsubset getbundle known lookup protocaps pushkey streamreqs=generaldelta,revlogv1,sparserevlog unbundle=HG10GZ,HG10BZ,HG10UN unbundlehash\n
i> write(98) -> 98:
i> between\n
i> pairs 81\n
i> 0000000000000000000000000000000000000000-0000000000000000000000000000000000000000
o> readline() -> 2:
o> 1\n
o> readline() -> 1:
o> \n
When sending a dict argument value, it is serialized to
"<arg> <item count>" followed by "<key> <len>\n<value>" for each item
in the dict.
Dictionary value for unknown command
$ hg debugwireproto --localssh --peer raw << EOF
> raw
> unknown\n
> dict 3\n
> key1 3\n
> foo\n
> key2 3\n
> bar\n
> key3 3\n
> baz\n
> readline
> readline
> readline
> readline
> readline
> readline
> readline
> readline
> raw
> hello\n
> readline
> readline
> EOF
using raw connection to peer
i> write(48) -> 48:
i> unknown\n
i> dict 3\n
i> key1 3\n
i> foo\n
i> key2 3\n
i> bar\n
i> key3 3\n
i> baz\n
o> readline() -> 2:
o> 0\n
o> readline() -> 2:
o> 0\n
o> readline() -> 2:
o> 0\n
o> readline() -> 2:
o> 0\n
o> readline() -> 2:
o> 0\n
o> readline() -> 2:
o> 0\n
o> readline() -> 2:
o> 0\n
o> readline() -> 2:
o> 0\n
i> write(6) -> 6:
i> hello\n
o> readline() -> 4:
o> 463\n
o> readline() -> 463:
o> capabilities: batch branchmap $USUAL_BUNDLE2_CAPS$ changegroupsubset getbundle known lookup protocaps pushkey streamreqs=generaldelta,revlogv1,sparserevlog unbundle=HG10GZ,HG10BZ,HG10UN unbundlehash\n
Incomplete dictionary send
$ hg debugwireproto --localssh --peer raw << EOF
> raw
> unknown\n
> dict 3\n
> key1 3\n
> foo\n
> readline
> readline
> readline
> readline
> EOF
using raw connection to peer
i> write(26) -> 26:
i> unknown\n
i> dict 3\n
i> key1 3\n
i> foo\n
o> readline() -> 2:
o> 0\n
o> readline() -> 2:
o> 0\n
o> readline() -> 2:
o> 0\n
o> readline() -> 2:
o> 0\n
Incomplete value send
$ hg debugwireproto --localssh --peer raw << EOF
> raw
> unknown\n
> dict 3\n
> key1 3\n
> fo
> readline
> readline
> readline
> EOF
using raw connection to peer
i> write(24) -> 24:
i> unknown\n
i> dict 3\n
i> key1 3\n
i> fo
o> readline() -> 2:
o> 0\n
o> readline() -> 2:
o> 0\n
o> readline() -> 2:
o> 0\n
Send a command line with spaces
$ hg debugwireproto --localssh --peer raw << EOF
> raw
> unknown withspace\n
> readline
> raw
> hello\n
> readline
> readline
> raw
> between\n
> pairs 81\n
> 0000000000000000000000000000000000000000-0000000000000000000000000000000000000000
> readline
> readline
> EOF
using raw connection to peer
i> write(18) -> 18:
i> unknown withspace\n
o> readline() -> 2:
o> 0\n
i> write(6) -> 6:
i> hello\n
o> readline() -> 4:
o> 463\n
o> readline() -> 463:
o> capabilities: batch branchmap $USUAL_BUNDLE2_CAPS$ changegroupsubset getbundle known lookup protocaps pushkey streamreqs=generaldelta,revlogv1,sparserevlog unbundle=HG10GZ,HG10BZ,HG10UN unbundlehash\n
i> write(98) -> 98:
i> between\n
i> pairs 81\n
i> 0000000000000000000000000000000000000000-0000000000000000000000000000000000000000
o> readline() -> 2:
o> 1\n
o> readline() -> 1:
o> \n
$ hg debugwireproto --localssh --peer raw << EOF
> raw
> unknown with multiple spaces\n
> readline
> raw
> hello\n
> readline
> readline
> raw
> between\n
> pairs 81\n
> 0000000000000000000000000000000000000000-0000000000000000000000000000000000000000
> readline
> EOF
using raw connection to peer
i> write(29) -> 29:
i> unknown with multiple spaces\n
o> readline() -> 2:
o> 0\n
i> write(6) -> 6:
i> hello\n
o> readline() -> 4:
o> 463\n
o> readline() -> 463:
o> capabilities: batch branchmap $USUAL_BUNDLE2_CAPS$ changegroupsubset getbundle known lookup protocaps pushkey streamreqs=generaldelta,revlogv1,sparserevlog unbundle=HG10GZ,HG10BZ,HG10UN unbundlehash\n
i> write(98) -> 98:
i> between\n
i> pairs 81\n
i> 0000000000000000000000000000000000000000-0000000000000000000000000000000000000000
o> readline() -> 2:
o> 1\n
$ hg debugwireproto --localssh --peer raw << EOF
> raw
> unknown with spaces\n
> key 10\n
> some value\n
> readline
> readline
> readline
> raw
> hello\n
> readline
> readline
> raw
> between\n
> pairs 81\n
> 0000000000000000000000000000000000000000-0000000000000000000000000000000000000000
> readline
> readline
> EOF
using raw connection to peer
i> write(38) -> 38:
i> unknown with spaces\n
i> key 10\n
i> some value\n
o> readline() -> 2:
o> 0\n
o> readline() -> 2:
o> 0\n
o> readline() -> 2:
o> 0\n
i> write(6) -> 6:
i> hello\n
o> readline() -> 4:
o> 463\n
o> readline() -> 463:
o> capabilities: batch branchmap $USUAL_BUNDLE2_CAPS$ changegroupsubset getbundle known lookup protocaps pushkey streamreqs=generaldelta,revlogv1,sparserevlog unbundle=HG10GZ,HG10BZ,HG10UN unbundlehash\n
i> write(98) -> 98:
i> between\n
i> pairs 81\n
i> 0000000000000000000000000000000000000000-0000000000000000000000000000000000000000
o> readline() -> 2:
o> 1\n
o> readline() -> 1:
o> \n
Send an unknown command after the "between"
$ hg debugwireproto --localssh --peer raw << EOF
> raw
> hello\n
> readline
> readline
> raw
> between\n
> pairs 81\n
> 0000000000000000000000000000000000000000-0000000000000000000000000000000000000000unknown
> readline
> readline
> EOF
using raw connection to peer
i> write(6) -> 6:
i> hello\n
o> readline() -> 4:
o> 463\n
o> readline() -> 463:
o> capabilities: batch branchmap $USUAL_BUNDLE2_CAPS$ changegroupsubset getbundle known lookup protocaps pushkey streamreqs=generaldelta,revlogv1,sparserevlog unbundle=HG10GZ,HG10BZ,HG10UN unbundlehash\n
i> write(105) -> 105:
i> between\n
i> pairs 81\n
i> 0000000000000000000000000000000000000000-0000000000000000000000000000000000000000unknown
o> readline() -> 2:
o> 1\n
o> readline() -> 1:
o> \n
And one with arguments
$ hg debugwireproto --localssh --peer raw << EOF
> raw
> hello\n
> between\n
> pairs 81\n
> 0000000000000000000000000000000000000000-0000000000000000000000000000000000000000
> readline
> readline
> readline
> readline
> raw
> unknown\n
> foo 5\n
> \nvalue\n
> bar 3\n
> baz\n
> readline
> readline
> readline
> EOF
using raw connection to peer
i> write(104) -> 104:
i> hello\n
i> between\n
i> pairs 81\n
i> 0000000000000000000000000000000000000000-0000000000000000000000000000000000000000
o> readline() -> 4:
o> 463\n
o> readline() -> 463:
o> capabilities: batch branchmap $USUAL_BUNDLE2_CAPS$ changegroupsubset getbundle known lookup protocaps pushkey streamreqs=generaldelta,revlogv1,sparserevlog unbundle=HG10GZ,HG10BZ,HG10UN unbundlehash\n
o> readline() -> 2:
o> 1\n
o> readline() -> 1:
o> \n
i> write(31) -> 31:
i> unknown\n
i> foo 5\n
i> \n
i> value\n
i> bar 3\n
i> baz\n
o> readline() -> 2:
o> 0\n
o> readline() -> 2:
o> 0\n
o> readline() -> 0:
Send a valid command before the handshake
$ hg debugwireproto --localssh --peer raw << EOF
> raw
> heads\n
> readline
> raw
> hello\n
> between\n
> pairs 81\n
> 0000000000000000000000000000000000000000-0000000000000000000000000000000000000000
> readline
> readline
> readline
> readline
> EOF
using raw connection to peer
i> write(6) -> 6:
i> heads\n
o> readline() -> 3:
o> 41\n
i> write(104) -> 104:
i> hello\n
i> between\n
i> pairs 81\n
i> 0000000000000000000000000000000000000000-0000000000000000000000000000000000000000
o> readline() -> 41:
o> 68986213bd4485ea51533535e3fc9e78007a711f\n
o> readline() -> 4:
o> 463\n
o> readline() -> 463:
o> capabilities: batch branchmap $USUAL_BUNDLE2_CAPS$ changegroupsubset getbundle known lookup protocaps pushkey streamreqs=generaldelta,revlogv1,sparserevlog unbundle=HG10GZ,HG10BZ,HG10UN unbundlehash\n
o> readline() -> 2:
o> 1\n
And a variation that doesn't send the between command
$ hg debugwireproto --localssh --peer raw << EOF
> raw
> heads\n
> readline
> raw
> hello\n
> readline
> readline
> EOF
using raw connection to peer
i> write(6) -> 6:
i> heads\n
o> readline() -> 3:
o> 41\n
i> write(6) -> 6:
i> hello\n
o> readline() -> 41:
o> 68986213bd4485ea51533535e3fc9e78007a711f\n
o> readline() -> 4:
o> 463\n
Send an upgrade request to a server that doesn't support that command
$ hg debugwireproto --localssh --peer raw << EOF
> raw
> upgrade 2e82ab3f-9ce3-4b4e-8f8c-6fd1c0e9e23a proto=irrelevant1%2Cirrelevant2\n
> readline
> raw
> hello\n
> between\n
> pairs 81\n
> 0000000000000000000000000000000000000000-0000000000000000000000000000000000000000
> readline
> readline
> readline
> readline
> EOF
using raw connection to peer
i> write(77) -> 77:
i> upgrade 2e82ab3f-9ce3-4b4e-8f8c-6fd1c0e9e23a proto=irrelevant1%2Cirrelevant2\n
o> readline() -> 2:
o> 0\n
i> write(104) -> 104:
i> hello\n
i> between\n
i> pairs 81\n
i> 0000000000000000000000000000000000000000-0000000000000000000000000000000000000000
o> readline() -> 4:
o> 463\n
o> readline() -> 463:
o> capabilities: batch branchmap $USUAL_BUNDLE2_CAPS$ changegroupsubset getbundle known lookup protocaps pushkey streamreqs=generaldelta,revlogv1,sparserevlog unbundle=HG10GZ,HG10BZ,HG10UN unbundlehash\n
o> readline() -> 2:
o> 1\n
o> readline() -> 1:
o> \n
$ cd ..
$ hg --config experimental.sshpeer.advertise-v2=true --debug debugpeer ssh://user@dummy/server
running * "*/tests/dummyssh" 'user@dummy' 'hg -R server serve --stdio' (glob) (no-windows !)
running * "*\tests/dummyssh" "user@dummy" "hg -R server serve --stdio" (glob) (windows !)
sending upgrade request: * proto=exp-ssh-v2-0003 (glob)
devel-peer-request: hello+between
devel-peer-request: pairs: 81 bytes
sending hello command
sending between command
remote: 0
remote: 463
remote: capabilities: batch branchmap $USUAL_BUNDLE2_CAPS$ changegroupsubset getbundle known lookup protocaps pushkey streamreqs=generaldelta,revlogv1,sparserevlog unbundle=HG10GZ,HG10BZ,HG10UN unbundlehash
remote: 1
devel-peer-request: protocaps
devel-peer-request: caps: * bytes (glob)
sending protocaps command
url: ssh://user@dummy/server
local: no
pushable: yes
Enable version 2 support on server. We need to do this in hgrc because we can't
use --config with `hg serve --stdio`.
$ cat >> server/.hg/hgrc << EOF
> [experimental]
> sshserver.support-v2 = true
> EOF
Send an upgrade request to a server that supports upgrade
$ cd server
$ hg debugwireproto --localssh --peer raw << EOF
> raw
> upgrade this-is-some-token proto=exp-ssh-v2-0003\n
> hello\n
> between\n
> pairs 81\n
> 0000000000000000000000000000000000000000-0000000000000000000000000000000000000000
> readline
> readline
> readline
> EOF
using raw connection to peer
i> write(153) -> 153:
i> upgrade this-is-some-token proto=exp-ssh-v2-0003\n
i> hello\n
i> between\n
i> pairs 81\n
i> 0000000000000000000000000000000000000000-0000000000000000000000000000000000000000
o> readline() -> 44:
o> upgraded this-is-some-token exp-ssh-v2-0003\n
o> readline() -> 4:
o> 462\n
o> readline() -> 463:
o> capabilities: batch branchmap $USUAL_BUNDLE2_CAPS$ changegroupsubset getbundle known lookup protocaps pushkey streamreqs=generaldelta,revlogv1,sparserevlog unbundle=HG10GZ,HG10BZ,HG10UN unbundlehash\n
$ cd ..
$ hg --config experimental.sshpeer.advertise-v2=true --debug debugpeer ssh://user@dummy/server
running * "*/tests/dummyssh" 'user@dummy' 'hg -R server serve --stdio' (glob) (no-windows !)
running * "*\tests/dummyssh" "user@dummy" "hg -R server serve --stdio" (glob) (windows !)
sending upgrade request: * proto=exp-ssh-v2-0003 (glob)
devel-peer-request: hello+between
devel-peer-request: pairs: 81 bytes
sending hello command
sending between command
protocol upgraded to exp-ssh-v2-0003
remote: capabilities: batch branchmap $USUAL_BUNDLE2_CAPS$ changegroupsubset getbundle known lookup protocaps pushkey streamreqs=generaldelta,revlogv1,sparserevlog unbundle=HG10GZ,HG10BZ,HG10UN unbundlehash
devel-peer-request: protocaps
devel-peer-request: caps: * bytes (glob)
sending protocaps command
url: ssh://user@dummy/server
local: no
pushable: yes
Verify the peer has capabilities
$ hg --config experimental.sshpeer.advertise-v2=true --debug debugcapabilities ssh://user@dummy/server
running * "*/tests/dummyssh" 'user@dummy' 'hg -R server serve --stdio' (glob) (no-windows !)
running * "*\tests/dummyssh" "user@dummy" "hg -R server serve --stdio" (glob) (windows !)
sending upgrade request: * proto=exp-ssh-v2-0003 (glob)
devel-peer-request: hello+between
devel-peer-request: pairs: 81 bytes
sending hello command
sending between command
protocol upgraded to exp-ssh-v2-0003
remote: capabilities: batch branchmap $USUAL_BUNDLE2_CAPS$ changegroupsubset getbundle known lookup protocaps pushkey streamreqs=generaldelta,revlogv1,sparserevlog unbundle=HG10GZ,HG10BZ,HG10UN unbundlehash
devel-peer-request: protocaps
devel-peer-request: caps: * bytes (glob)
sending protocaps command
Main capabilities:
batch
branchmap
$USUAL_BUNDLE2_CAPS$
changegroupsubset
getbundle
known
lookup
protocaps
pushkey
streamreqs=generaldelta,revlogv1,sparserevlog
unbundle=HG10GZ,HG10BZ,HG10UN
unbundlehash
Bundle2 capabilities:
HG20
bookmarks
changegroup
01
02
checkheads
related
digests
md5
sha1
sha512
error
abort
unsupportedcontent
pushraced
pushkey
hgtagsfnodes
listkeys
phases
heads
pushkey
remote-changegroup
http
https
rev-branch-cache
stream
v2
Command after upgrade to version 2 is processed
$ cd server
$ hg debugwireproto --localssh --peer raw << EOF
> raw
> upgrade this-is-some-token proto=exp-ssh-v2-0003\n
> hello\n
> between\n
> pairs 81\n
> 0000000000000000000000000000000000000000-0000000000000000000000000000000000000000
> readline
> readline
> readline
> raw
> hello\n
> readline
> readline
> EOF
using raw connection to peer
i> write(153) -> 153:
i> upgrade this-is-some-token proto=exp-ssh-v2-0003\n
i> hello\n
i> between\n
i> pairs 81\n
i> 0000000000000000000000000000000000000000-0000000000000000000000000000000000000000
o> readline() -> 44:
o> upgraded this-is-some-token exp-ssh-v2-0003\n
o> readline() -> 4:
o> 462\n
o> readline() -> 463:
o> capabilities: batch branchmap $USUAL_BUNDLE2_CAPS$ changegroupsubset getbundle known lookup protocaps pushkey streamreqs=generaldelta,revlogv1,sparserevlog unbundle=HG10GZ,HG10BZ,HG10UN unbundlehash\n
i> write(6) -> 6:
i> hello\n
o> readline() -> 4:
o> 447\n
o> readline() -> 447:
o> capabilities: branchmap $USUAL_BUNDLE2_CAPS$ changegroupsubset getbundle known lookup pushkey streamreqs=generaldelta,revlogv1,sparserevlog unbundle=HG10GZ,HG10BZ,HG10UN unbundlehash\n
Multiple upgrades is not allowed
$ hg debugwireproto --localssh --peer raw << EOF
> raw
> upgrade this-is-some-token proto=exp-ssh-v2-0003\n
> hello\n
> between\n
> pairs 81\n
> 0000000000000000000000000000000000000000-0000000000000000000000000000000000000000
> readline
> readline
> readline
> raw
> upgrade another-token proto=irrelevant\n
> hello\n
> readline
> readavailable
> EOF
using raw connection to peer
i> write(153) -> 153:
i> upgrade this-is-some-token proto=exp-ssh-v2-0003\n
i> hello\n
i> between\n
i> pairs 81\n
i> 0000000000000000000000000000000000000000-0000000000000000000000000000000000000000
o> readline() -> 44:
o> upgraded this-is-some-token exp-ssh-v2-0003\n
o> readline() -> 4:
o> 462\n
o> readline() -> 463:
o> capabilities: batch branchmap $USUAL_BUNDLE2_CAPS$ changegroupsubset getbundle known lookup protocaps pushkey streamreqs=generaldelta,revlogv1,sparserevlog unbundle=HG10GZ,HG10BZ,HG10UN unbundlehash\n
i> write(45) -> 45:
i> upgrade another-token proto=irrelevant\n
i> hello\n
o> readline() -> 1:
o> \n
e> read(-1) -> 42:
e> cannot upgrade protocols multiple times\n
e> -\n
Malformed upgrade request line (not exactly 3 space delimited tokens)
$ hg debugwireproto --localssh --peer raw << EOF
> raw
> upgrade\n
> readline
> EOF
using raw connection to peer
i> write(8) -> 8:
i> upgrade\n
o> readline() -> 2:
o> 0\n
$ hg debugwireproto --localssh --peer raw << EOF
> raw
> upgrade token\n
> readline
> EOF
using raw connection to peer
i> write(14) -> 14:
i> upgrade token\n
o> readline() -> 2:
o> 0\n
$ hg debugwireproto --localssh --peer raw << EOF
> raw
> upgrade token foo=bar extra-token\n
> readline
> EOF
using raw connection to peer
i> write(34) -> 34:
i> upgrade token foo=bar extra-token\n
o> readline() -> 2:
o> 0\n
Upgrade request to unsupported protocol is ignored
$ hg debugwireproto --localssh --peer raw << EOF
> raw
> upgrade this-is-some-token proto=unknown1,unknown2\n
> readline
> raw
> hello\n
> readline
> readline
> raw
> between\n
> pairs 81\n
> 0000000000000000000000000000000000000000-0000000000000000000000000000000000000000
> readline
> readline
> EOF
using raw connection to peer
i> write(51) -> 51:
i> upgrade this-is-some-token proto=unknown1,unknown2\n
o> readline() -> 2:
o> 0\n
i> write(6) -> 6:
i> hello\n
o> readline() -> 4:
o> 463\n
o> readline() -> 463:
o> capabilities: batch branchmap $USUAL_BUNDLE2_CAPS$ changegroupsubset getbundle known lookup protocaps pushkey streamreqs=generaldelta,revlogv1,sparserevlog unbundle=HG10GZ,HG10BZ,HG10UN unbundlehash\n
i> write(98) -> 98:
i> between\n
i> pairs 81\n
i> 0000000000000000000000000000000000000000-0000000000000000000000000000000000000000
o> readline() -> 2:
o> 1\n
o> readline() -> 1:
o> \n
Upgrade request must be followed by hello + between
$ hg debugwireproto --localssh --peer raw << EOF
> raw
> upgrade token proto=exp-ssh-v2-0003\n
> invalid\n
> readline
> readavailable
> EOF
using raw connection to peer
i> write(44) -> 44:
i> upgrade token proto=exp-ssh-v2-0003\n
i> invalid\n
o> readline() -> 1:
o> \n
e> read(-1) -> 46:
e> malformed handshake protocol: missing hello\n
e> -\n
$ hg debugwireproto --localssh --peer raw << EOF
> raw
> upgrade token proto=exp-ssh-v2-0003\n
> hello\n
> invalid\n
> readline
> readavailable
> EOF
using raw connection to peer
i> write(50) -> 50:
i> upgrade token proto=exp-ssh-v2-0003\n
i> hello\n
i> invalid\n
o> readline() -> 1:
o> \n
e> read(-1) -> 48:
e> malformed handshake protocol: missing between\n
e> -\n
$ hg debugwireproto --localssh --peer raw << EOF
> raw
> upgrade token proto=exp-ssh-v2-0003\n
> hello\n
> between\n
> invalid\n
> readline
> readavailable
> EOF
using raw connection to peer
i> write(58) -> 58:
i> upgrade token proto=exp-ssh-v2-0003\n
i> hello\n
i> between\n
i> invalid\n
o> readline() -> 1:
o> \n
e> read(-1) -> 49:
e> malformed handshake protocol: missing pairs 81\n
e> -\n
Legacy commands are not exposed to version 2 of protocol
TODO re-enable these once we're back to actually using v2 commands
$ hg --config experimental.sshpeer.advertise-v2=true debugwireproto --localssh << EOF
> command branches
> nodes 0000000000000000000000000000000000000000
> EOF
creating ssh peer from handshake results
sending branches command
response:
$ hg --config experimental.sshpeer.advertise-v2=true debugwireproto --localssh << EOF
> command changegroup
> roots 0000000000000000000000000000000000000000
> EOF
creating ssh peer from handshake results
sending changegroup command
response:
$ hg --config experimental.sshpeer.advertise-v2=true debugwireproto --localssh << EOF
> command changegroupsubset
> bases 0000000000000000000000000000000000000000
> heads 0000000000000000000000000000000000000000
> EOF
creating ssh peer from handshake results
sending changegroupsubset command
response:
$ cd ..
Test listkeys for listing namespaces
$ hg init empty
$ cd empty
$ debugwireproto << EOF
> command listkeys
> namespace namespaces
> EOF
testing ssh1
creating ssh peer from handshake results
i> write(104) -> 104:
i> hello\n
i> between\n
i> pairs 81\n
i> 0000000000000000000000000000000000000000-0000000000000000000000000000000000000000
i> flush() -> None
o> readline() -> 4:
o> 463\n
o> readline() -> 463:
o> capabilities: batch branchmap $USUAL_BUNDLE2_CAPS$ changegroupsubset getbundle known lookup protocaps pushkey streamreqs=generaldelta,revlogv1,sparserevlog unbundle=HG10GZ,HG10BZ,HG10UN unbundlehash\n
o> readline() -> 2:
o> 1\n
o> readline() -> 1:
o> \n
sending listkeys command
i> write(9) -> 9:
i> listkeys\n
i> write(13) -> 13:
i> namespace 10\n
i> write(10) -> 10: namespaces
i> flush() -> None
o> bufferedreadline() -> 3:
o> 30\n
o> bufferedread(30) -> 30:
o> bookmarks\t\n
o> namespaces\t\n
o> phases\t
response: {
b'bookmarks': b'',
b'namespaces': b'',
b'phases': b''
}
testing ssh2
creating ssh peer from handshake results
i> write(171) -> 171:
i> upgrade * proto=exp-ssh-v2-0003\n (glob)
i> hello\n
i> between\n
i> pairs 81\n
i> 0000000000000000000000000000000000000000-0000000000000000000000000000000000000000
i> flush() -> None
o> readline() -> 62:
o> upgraded * exp-ssh-v2-0003\n (glob)
o> readline() -> 4:
o> 462\n
o> read(462) -> 462: capabilities: batch branchmap $USUAL_BUNDLE2_CAPS$ changegroupsubset getbundle known lookup protocaps pushkey streamreqs=generaldelta,revlogv1,sparserevlog unbundle=HG10GZ,HG10BZ,HG10UN unbundlehash
o> read(1) -> 1:
o> \n
sending listkeys command
i> write(9) -> 9:
i> listkeys\n
i> write(13) -> 13:
i> namespace 10\n
i> write(10) -> 10: namespaces
i> flush() -> None
o> bufferedreadline() -> 3:
o> 30\n
o> bufferedread(30) -> 30:
o> bookmarks\t\n
o> namespaces\t\n
o> phases\t
response: {
b'bookmarks': b'',
b'namespaces': b'',
b'phases': b''
}
$ cd ..
Test listkeys for bookmarks
$ hg init bookmarkrepo
$ cd bookmarkrepo
$ echo 0 > foo
$ hg add foo
$ hg -q commit -m initial
$ echo 1 > foo
$ hg commit -m second
With no bookmarks set
$ debugwireproto << EOF
> command listkeys
> namespace bookmarks
> EOF
testing ssh1
creating ssh peer from handshake results
i> write(104) -> 104:
i> hello\n
i> between\n
i> pairs 81\n
i> 0000000000000000000000000000000000000000-0000000000000000000000000000000000000000
i> flush() -> None
o> readline() -> 4:
o> 463\n
o> readline() -> 463:
o> capabilities: batch branchmap $USUAL_BUNDLE2_CAPS$ changegroupsubset getbundle known lookup protocaps pushkey streamreqs=generaldelta,revlogv1,sparserevlog unbundle=HG10GZ,HG10BZ,HG10UN unbundlehash\n
o> readline() -> 2:
o> 1\n
o> readline() -> 1:
o> \n
sending listkeys command
i> write(9) -> 9:
i> listkeys\n
i> write(12) -> 12:
i> namespace 9\n
i> write(9) -> 9: bookmarks
i> flush() -> None
o> bufferedreadline() -> 2:
o> 0\n
response: {}
testing ssh2
creating ssh peer from handshake results
i> write(171) -> 171:
i> upgrade * proto=exp-ssh-v2-0003\n (glob)
i> hello\n
i> between\n
i> pairs 81\n
i> 0000000000000000000000000000000000000000-0000000000000000000000000000000000000000
i> flush() -> None
o> readline() -> 62:
o> upgraded * exp-ssh-v2-0003\n (glob)
o> readline() -> 4:
o> 462\n
o> read(462) -> 462: capabilities: batch branchmap $USUAL_BUNDLE2_CAPS$ changegroupsubset getbundle known lookup protocaps pushkey streamreqs=generaldelta,revlogv1,sparserevlog unbundle=HG10GZ,HG10BZ,HG10UN unbundlehash
o> read(1) -> 1:
o> \n
sending listkeys command
i> write(9) -> 9:
i> listkeys\n
i> write(12) -> 12:
i> namespace 9\n
i> write(9) -> 9: bookmarks
i> flush() -> None
o> bufferedreadline() -> 2:
o> 0\n
response: {}
With a single bookmark set
$ hg book -r 0 bookA
$ debugwireproto << EOF
> command listkeys
> namespace bookmarks
> EOF
testing ssh1
creating ssh peer from handshake results
i> write(104) -> 104:
i> hello\n
i> between\n
i> pairs 81\n
i> 0000000000000000000000000000000000000000-0000000000000000000000000000000000000000
i> flush() -> None
o> readline() -> 4:
o> 463\n
o> readline() -> 463:
o> capabilities: batch branchmap $USUAL_BUNDLE2_CAPS$ changegroupsubset getbundle known lookup protocaps pushkey streamreqs=generaldelta,revlogv1,sparserevlog unbundle=HG10GZ,HG10BZ,HG10UN unbundlehash\n
o> readline() -> 2:
o> 1\n
o> readline() -> 1:
o> \n
sending listkeys command
i> write(9) -> 9:
i> listkeys\n
i> write(12) -> 12:
i> namespace 9\n
i> write(9) -> 9: bookmarks
i> flush() -> None
o> bufferedreadline() -> 3:
o> 46\n
o> bufferedread(46) -> 46: bookA\t68986213bd4485ea51533535e3fc9e78007a711f
response: {
b'bookA': b'68986213bd4485ea51533535e3fc9e78007a711f'
}
testing ssh2
creating ssh peer from handshake results
i> write(171) -> 171:
i> upgrade * proto=exp-ssh-v2-0003\n (glob)
i> hello\n
i> between\n
i> pairs 81\n
i> 0000000000000000000000000000000000000000-0000000000000000000000000000000000000000
i> flush() -> None
o> readline() -> 62:
o> upgraded * exp-ssh-v2-0003\n (glob)
o> readline() -> 4:
o> 462\n
o> read(462) -> 462: capabilities: batch branchmap $USUAL_BUNDLE2_CAPS$ changegroupsubset getbundle known lookup protocaps pushkey streamreqs=generaldelta,revlogv1,sparserevlog unbundle=HG10GZ,HG10BZ,HG10UN unbundlehash
o> read(1) -> 1:
o> \n
sending listkeys command
i> write(9) -> 9:
i> listkeys\n
i> write(12) -> 12:
i> namespace 9\n
i> write(9) -> 9: bookmarks
i> flush() -> None
o> bufferedreadline() -> 3:
o> 46\n
o> bufferedread(46) -> 46: bookA\t68986213bd4485ea51533535e3fc9e78007a711f
response: {
b'bookA': b'68986213bd4485ea51533535e3fc9e78007a711f'
}
With multiple bookmarks set
$ hg book -r 1 bookB
$ debugwireproto << EOF
> command listkeys
> namespace bookmarks
> EOF
testing ssh1
creating ssh peer from handshake results
i> write(104) -> 104:
i> hello\n
i> between\n
i> pairs 81\n
i> 0000000000000000000000000000000000000000-0000000000000000000000000000000000000000
i> flush() -> None
o> readline() -> 4:
o> 463\n
o> readline() -> 463:
o> capabilities: batch branchmap $USUAL_BUNDLE2_CAPS$ changegroupsubset getbundle known lookup protocaps pushkey streamreqs=generaldelta,revlogv1,sparserevlog unbundle=HG10GZ,HG10BZ,HG10UN unbundlehash\n
o> readline() -> 2:
o> 1\n
o> readline() -> 1:
o> \n
sending listkeys command
i> write(9) -> 9:
i> listkeys\n
i> write(12) -> 12:
i> namespace 9\n
i> write(9) -> 9: bookmarks
i> flush() -> None
o> bufferedreadline() -> 3:
o> 93\n
o> bufferedread(93) -> 93:
o> bookA\t68986213bd4485ea51533535e3fc9e78007a711f\n
o> bookB\t1880f3755e2e52e3199e0ee5638128b08642f34d
response: {
b'bookA': b'68986213bd4485ea51533535e3fc9e78007a711f',
b'bookB': b'1880f3755e2e52e3199e0ee5638128b08642f34d'
}
testing ssh2
creating ssh peer from handshake results
i> write(171) -> 171:
i> upgrade * proto=exp-ssh-v2-0003\n (glob)
i> hello\n
i> between\n
i> pairs 81\n
i> 0000000000000000000000000000000000000000-0000000000000000000000000000000000000000
i> flush() -> None
o> readline() -> 62:
o> upgraded * exp-ssh-v2-0003\n (glob)
o> readline() -> 4:
o> 462\n
o> read(462) -> 462: capabilities: batch branchmap $USUAL_BUNDLE2_CAPS$ changegroupsubset getbundle known lookup protocaps pushkey streamreqs=generaldelta,revlogv1,sparserevlog unbundle=HG10GZ,HG10BZ,HG10UN unbundlehash
o> read(1) -> 1:
o> \n
sending listkeys command
i> write(9) -> 9:
i> listkeys\n
i> write(12) -> 12:
i> namespace 9\n
i> write(9) -> 9: bookmarks
i> flush() -> None
o> bufferedreadline() -> 3:
o> 93\n
o> bufferedread(93) -> 93:
o> bookA\t68986213bd4485ea51533535e3fc9e78007a711f\n
o> bookB\t1880f3755e2e52e3199e0ee5638128b08642f34d
response: {
b'bookA': b'68986213bd4485ea51533535e3fc9e78007a711f',
b'bookB': b'1880f3755e2e52e3199e0ee5638128b08642f34d'
}
Test pushkey for bookmarks
$ debugwireproto << EOF
> command pushkey
> namespace bookmarks
> key remote
> old
> new 68986213bd4485ea51533535e3fc9e78007a711f
> EOF
testing ssh1
creating ssh peer from handshake results
i> write(104) -> 104:
i> hello\n
i> between\n
i> pairs 81\n
i> 0000000000000000000000000000000000000000-0000000000000000000000000000000000000000
i> flush() -> None
o> readline() -> 4:
o> 463\n
o> readline() -> 463:
o> capabilities: batch branchmap $USUAL_BUNDLE2_CAPS$ changegroupsubset getbundle known lookup protocaps pushkey streamreqs=generaldelta,revlogv1,sparserevlog unbundle=HG10GZ,HG10BZ,HG10UN unbundlehash\n
o> readline() -> 2:
o> 1\n
o> readline() -> 1:
o> \n
sending pushkey command
i> write(8) -> 8:
i> pushkey\n
i> write(6) -> 6:
i> key 6\n
i> write(6) -> 6: remote
i> write(12) -> 12:
i> namespace 9\n
i> write(9) -> 9: bookmarks
i> write(7) -> 7:
i> new 40\n
i> write(40) -> 40: 68986213bd4485ea51533535e3fc9e78007a711f
i> write(6) -> 6:
i> old 0\n
i> flush() -> None
o> bufferedreadline() -> 2:
o> 2\n
o> bufferedread(2) -> 2:
o> 1\n
response: True
testing ssh2
creating ssh peer from handshake results
i> write(171) -> 171:
i> upgrade * proto=exp-ssh-v2-0003\n (glob)
i> hello\n
i> between\n
i> pairs 81\n
i> 0000000000000000000000000000000000000000-0000000000000000000000000000000000000000
i> flush() -> None
o> readline() -> 62:
o> upgraded * exp-ssh-v2-0003\n (glob)
o> readline() -> 4:
o> 462\n
o> read(462) -> 462: capabilities: batch branchmap $USUAL_BUNDLE2_CAPS$ changegroupsubset getbundle known lookup protocaps pushkey streamreqs=generaldelta,revlogv1,sparserevlog unbundle=HG10GZ,HG10BZ,HG10UN unbundlehash
o> read(1) -> 1:
o> \n
sending pushkey command
i> write(8) -> 8:
i> pushkey\n
i> write(6) -> 6:
i> key 6\n
i> write(6) -> 6: remote
i> write(12) -> 12:
i> namespace 9\n
i> write(9) -> 9: bookmarks
i> write(7) -> 7:
i> new 40\n
i> write(40) -> 40: 68986213bd4485ea51533535e3fc9e78007a711f
i> write(6) -> 6:
i> old 0\n
i> flush() -> None
o> bufferedreadline() -> 2:
o> 2\n
o> bufferedread(2) -> 2:
o> 1\n
response: True
$ hg bookmarks
bookA 0:68986213bd44
bookB 1:1880f3755e2e
remote 0:68986213bd44
$ cd ..
Test listkeys for phases
$ hg init phasesrepo
$ cd phasesrepo
Phases on empty repo
$ debugwireproto << EOF
> command listkeys
> namespace phases
> EOF
testing ssh1
creating ssh peer from handshake results
i> write(104) -> 104:
i> hello\n
i> between\n
i> pairs 81\n
i> 0000000000000000000000000000000000000000-0000000000000000000000000000000000000000
i> flush() -> None
o> readline() -> 4:
o> 463\n
o> readline() -> 463:
o> capabilities: batch branchmap $USUAL_BUNDLE2_CAPS$ changegroupsubset getbundle known lookup protocaps pushkey streamreqs=generaldelta,revlogv1,sparserevlog unbundle=HG10GZ,HG10BZ,HG10UN unbundlehash\n
o> readline() -> 2:
o> 1\n
o> readline() -> 1:
o> \n
sending listkeys command
i> write(9) -> 9:
i> listkeys\n
i> write(12) -> 12:
i> namespace 6\n
i> write(6) -> 6: phases
i> flush() -> None
o> bufferedreadline() -> 3:
o> 15\n
o> bufferedread(15) -> 15: publishing\tTrue
response: {
b'publishing': b'True'
}
testing ssh2
creating ssh peer from handshake results
i> write(171) -> 171:
i> upgrade * proto=exp-ssh-v2-0003\n (glob)
i> hello\n
i> between\n
i> pairs 81\n
i> 0000000000000000000000000000000000000000-0000000000000000000000000000000000000000
i> flush() -> None
o> readline() -> 62:
o> upgraded * exp-ssh-v2-0003\n (glob)
o> readline() -> 4:
o> 462\n
o> read(462) -> 462: capabilities: batch branchmap $USUAL_BUNDLE2_CAPS$ changegroupsubset getbundle known lookup protocaps pushkey streamreqs=generaldelta,revlogv1,sparserevlog unbundle=HG10GZ,HG10BZ,HG10UN unbundlehash
o> read(1) -> 1:
o> \n
sending listkeys command
i> write(9) -> 9:
i> listkeys\n
i> write(12) -> 12:
i> namespace 6\n
i> write(6) -> 6: phases
i> flush() -> None
o> bufferedreadline() -> 3:
o> 15\n
o> bufferedread(15) -> 15: publishing\tTrue
response: {
b'publishing': b'True'
}
Create some commits
$ echo 0 > foo
$ hg add foo
$ hg -q commit -m initial
$ hg phase --public
$ echo 1 > foo
$ hg commit -m 'head 1 commit 1'
$ echo 2 > foo
$ hg commit -m 'head 1 commit 2'
$ hg -q up 0
$ echo 1a > foo
$ hg commit -m 'head 2 commit 1'
created new head
$ echo 2a > foo
$ hg commit -m 'head 2 commit 2'
Two draft heads
$ debugwireproto << EOF
> command listkeys
> namespace phases
> EOF
testing ssh1
creating ssh peer from handshake results
i> write(104) -> 104:
i> hello\n
i> between\n
i> pairs 81\n
i> 0000000000000000000000000000000000000000-0000000000000000000000000000000000000000
i> flush() -> None
o> readline() -> 4:
o> 463\n
o> readline() -> 463:
o> capabilities: batch branchmap $USUAL_BUNDLE2_CAPS$ changegroupsubset getbundle known lookup protocaps pushkey streamreqs=generaldelta,revlogv1,sparserevlog unbundle=HG10GZ,HG10BZ,HG10UN unbundlehash\n
o> readline() -> 2:
o> 1\n
o> readline() -> 1:
o> \n
sending listkeys command
i> write(9) -> 9:
i> listkeys\n
i> write(12) -> 12:
i> namespace 6\n
i> write(6) -> 6: phases
i> flush() -> None
o> bufferedreadline() -> 4:
o> 101\n
o> bufferedread(101) -> 101:
o> 20b8a89289d80036e6c4e87c2083e3bea1586637\t1\n
o> c4750011d906c18ea2f0527419cbc1a544435150\t1\n
o> publishing\tTrue
response: {
b'20b8a89289d80036e6c4e87c2083e3bea1586637': b'1',
b'c4750011d906c18ea2f0527419cbc1a544435150': b'1',
b'publishing': b'True'
}
testing ssh2
creating ssh peer from handshake results
i> write(171) -> 171:
i> upgrade * proto=exp-ssh-v2-0003\n (glob)
i> hello\n
i> between\n
i> pairs 81\n
i> 0000000000000000000000000000000000000000-0000000000000000000000000000000000000000
i> flush() -> None
o> readline() -> 62:
o> upgraded * exp-ssh-v2-0003\n (glob)
o> readline() -> 4:
o> 462\n
o> read(462) -> 462: capabilities: batch branchmap $USUAL_BUNDLE2_CAPS$ changegroupsubset getbundle known lookup protocaps pushkey streamreqs=generaldelta,revlogv1,sparserevlog unbundle=HG10GZ,HG10BZ,HG10UN unbundlehash
o> read(1) -> 1:
o> \n
sending listkeys command
i> write(9) -> 9:
i> listkeys\n
i> write(12) -> 12:
i> namespace 6\n
i> write(6) -> 6: phases
i> flush() -> None
o> bufferedreadline() -> 4:
o> 101\n
o> bufferedread(101) -> 101:
o> 20b8a89289d80036e6c4e87c2083e3bea1586637\t1\n
o> c4750011d906c18ea2f0527419cbc1a544435150\t1\n
o> publishing\tTrue
response: {
b'20b8a89289d80036e6c4e87c2083e3bea1586637': b'1',
b'c4750011d906c18ea2f0527419cbc1a544435150': b'1',
b'publishing': b'True'
}
Single draft head
$ hg phase --public -r 2
$ debugwireproto << EOF
> command listkeys
> namespace phases
> EOF
testing ssh1
creating ssh peer from handshake results
i> write(104) -> 104:
i> hello\n
i> between\n
i> pairs 81\n
i> 0000000000000000000000000000000000000000-0000000000000000000000000000000000000000
i> flush() -> None
o> readline() -> 4:
o> 463\n
o> readline() -> 463:
o> capabilities: batch branchmap $USUAL_BUNDLE2_CAPS$ changegroupsubset getbundle known lookup protocaps pushkey streamreqs=generaldelta,revlogv1,sparserevlog unbundle=HG10GZ,HG10BZ,HG10UN unbundlehash\n
o> readline() -> 2:
o> 1\n
o> readline() -> 1:
o> \n
sending listkeys command
i> write(9) -> 9:
i> listkeys\n
i> write(12) -> 12:
i> namespace 6\n
i> write(6) -> 6: phases
i> flush() -> None
o> bufferedreadline() -> 3:
o> 58\n
o> bufferedread(58) -> 58:
o> c4750011d906c18ea2f0527419cbc1a544435150\t1\n
o> publishing\tTrue
response: {
b'c4750011d906c18ea2f0527419cbc1a544435150': b'1',
b'publishing': b'True'
}
testing ssh2
creating ssh peer from handshake results
i> write(171) -> 171:
i> upgrade * proto=exp-ssh-v2-0003\n (glob)
i> hello\n
i> between\n
i> pairs 81\n
i> 0000000000000000000000000000000000000000-0000000000000000000000000000000000000000
i> flush() -> None
o> readline() -> 62:
o> upgraded * exp-ssh-v2-0003\n (glob)
o> readline() -> 4:
o> 462\n
o> read(462) -> 462: capabilities: batch branchmap $USUAL_BUNDLE2_CAPS$ changegroupsubset getbundle known lookup protocaps pushkey streamreqs=generaldelta,revlogv1,sparserevlog unbundle=HG10GZ,HG10BZ,HG10UN unbundlehash
o> read(1) -> 1:
o> \n
sending listkeys command
i> write(9) -> 9:
i> listkeys\n
i> write(12) -> 12:
i> namespace 6\n
i> write(6) -> 6: phases
i> flush() -> None
o> bufferedreadline() -> 3:
o> 58\n
o> bufferedread(58) -> 58:
o> c4750011d906c18ea2f0527419cbc1a544435150\t1\n
o> publishing\tTrue
response: {
b'c4750011d906c18ea2f0527419cbc1a544435150': b'1',
b'publishing': b'True'
}
All public heads
$ hg phase --public -r 4
$ debugwireproto << EOF
> command listkeys
> namespace phases
> EOF
testing ssh1
creating ssh peer from handshake results
i> write(104) -> 104:
i> hello\n
i> between\n
i> pairs 81\n
i> 0000000000000000000000000000000000000000-0000000000000000000000000000000000000000
i> flush() -> None
o> readline() -> 4:
o> 463\n
o> readline() -> 463:
o> capabilities: batch branchmap $USUAL_BUNDLE2_CAPS$ changegroupsubset getbundle known lookup protocaps pushkey streamreqs=generaldelta,revlogv1,sparserevlog unbundle=HG10GZ,HG10BZ,HG10UN unbundlehash\n
o> readline() -> 2:
o> 1\n
o> readline() -> 1:
o> \n
sending listkeys command
i> write(9) -> 9:
i> listkeys\n
i> write(12) -> 12:
i> namespace 6\n
i> write(6) -> 6: phases
i> flush() -> None
o> bufferedreadline() -> 3:
o> 15\n
o> bufferedread(15) -> 15: publishing\tTrue
response: {
b'publishing': b'True'
}
testing ssh2
creating ssh peer from handshake results
i> write(171) -> 171:
i> upgrade * proto=exp-ssh-v2-0003\n (glob)
i> hello\n
i> between\n
i> pairs 81\n
i> 0000000000000000000000000000000000000000-0000000000000000000000000000000000000000
i> flush() -> None
o> readline() -> 62:
o> upgraded * exp-ssh-v2-0003\n (glob)
o> readline() -> 4:
o> 462\n
o> read(462) -> 462: capabilities: batch branchmap $USUAL_BUNDLE2_CAPS$ changegroupsubset getbundle known lookup protocaps pushkey streamreqs=generaldelta,revlogv1,sparserevlog unbundle=HG10GZ,HG10BZ,HG10UN unbundlehash
o> read(1) -> 1:
o> \n
sending listkeys command
i> write(9) -> 9:
i> listkeys\n
i> write(12) -> 12:
i> namespace 6\n
i> write(6) -> 6: phases
i> flush() -> None
o> bufferedreadline() -> 3:
o> 15\n
o> bufferedread(15) -> 15: publishing\tTrue
response: {
b'publishing': b'True'
}
Setting public phase via pushkey
$ hg phase --draft --force -r .
$ debugwireproto << EOF
> command pushkey
> namespace phases
> key 7127240a084fd9dc86fe8d1f98e26229161ec82b
> old 1
> new 0
> EOF
testing ssh1
creating ssh peer from handshake results
i> write(104) -> 104:
i> hello\n
i> between\n
i> pairs 81\n
i> 0000000000000000000000000000000000000000-0000000000000000000000000000000000000000
i> flush() -> None
o> readline() -> 4:
o> 463\n
o> readline() -> 463:
o> capabilities: batch branchmap $USUAL_BUNDLE2_CAPS$ changegroupsubset getbundle known lookup protocaps pushkey streamreqs=generaldelta,revlogv1,sparserevlog unbundle=HG10GZ,HG10BZ,HG10UN unbundlehash\n
o> readline() -> 2:
o> 1\n
o> readline() -> 1:
o> \n
sending pushkey command
i> write(8) -> 8:
i> pushkey\n
i> write(7) -> 7:
i> key 40\n
i> write(40) -> 40: 7127240a084fd9dc86fe8d1f98e26229161ec82b
i> write(12) -> 12:
i> namespace 6\n
i> write(6) -> 6: phases
i> write(6) -> 6:
i> new 1\n
i> write(1) -> 1: 0
i> write(6) -> 6:
i> old 1\n
i> write(1) -> 1: 1
i> flush() -> None
o> bufferedreadline() -> 2:
o> 2\n
o> bufferedread(2) -> 2:
o> 1\n
response: True
testing ssh2
creating ssh peer from handshake results
i> write(171) -> 171:
i> upgrade * proto=exp-ssh-v2-0003\n (glob)
i> hello\n
i> between\n
i> pairs 81\n
i> 0000000000000000000000000000000000000000-0000000000000000000000000000000000000000
i> flush() -> None
o> readline() -> 62:
o> upgraded * exp-ssh-v2-0003\n (glob)
o> readline() -> 4:
o> 462\n
o> read(462) -> 462: capabilities: batch branchmap $USUAL_BUNDLE2_CAPS$ changegroupsubset getbundle known lookup protocaps pushkey streamreqs=generaldelta,revlogv1,sparserevlog unbundle=HG10GZ,HG10BZ,HG10UN unbundlehash
o> read(1) -> 1:
o> \n
sending pushkey command
i> write(8) -> 8:
i> pushkey\n
i> write(7) -> 7:
i> key 40\n
i> write(40) -> 40: 7127240a084fd9dc86fe8d1f98e26229161ec82b
i> write(12) -> 12:
i> namespace 6\n
i> write(6) -> 6: phases
i> write(6) -> 6:
i> new 1\n
i> write(1) -> 1: 0
i> write(6) -> 6:
i> old 1\n
i> write(1) -> 1: 1
i> flush() -> None
o> bufferedreadline() -> 2:
o> 2\n
o> bufferedread(2) -> 2:
o> 1\n
response: True
$ hg phase .
4: public
$ cd ..
Test batching of requests
$ hg init batching
$ cd batching
$ echo 0 > foo
$ hg add foo
$ hg -q commit -m initial
$ hg phase --public
$ echo 1 > foo
$ hg commit -m 'commit 1'
$ hg -q up 0
$ echo 2 > foo
$ hg commit -m 'commit 2'
created new head
$ hg book -r 1 bookA
$ hg book -r 2 bookB
$ debugwireproto << EOF
> batchbegin
> command heads
> command listkeys
> namespace bookmarks
> command listkeys
> namespace phases
> batchsubmit
> EOF
testing ssh1
creating ssh peer from handshake results
i> write(104) -> 104:
i> hello\n
i> between\n
i> pairs 81\n
i> 0000000000000000000000000000000000000000-0000000000000000000000000000000000000000
i> flush() -> None
o> readline() -> 4:
o> 463\n
o> readline() -> 463:
o> capabilities: batch branchmap $USUAL_BUNDLE2_CAPS$ changegroupsubset getbundle known lookup protocaps pushkey streamreqs=generaldelta,revlogv1,sparserevlog unbundle=HG10GZ,HG10BZ,HG10UN unbundlehash\n
o> readline() -> 2:
o> 1\n
o> readline() -> 1:
o> \n
sending batch with 3 sub-commands
i> write(6) -> 6:
i> batch\n
i> write(4) -> 4:
i> * 0\n
i> write(8) -> 8:
i> cmds 61\n
i> write(61) -> 61: heads ;listkeys namespace=bookmarks;listkeys namespace=phases
i> flush() -> None
o> bufferedreadline() -> 4:
o> 278\n
o> bufferedread(278) -> 278:
o> bfebe6bd38eebc6f8202e419c1171268987ea6a6 4ee3fcef1c800fa2bf23e20af7c83ff111d9c7ab\n
o> ;bookA\t4ee3fcef1c800fa2bf23e20af7c83ff111d9c7ab\n
o> bookB\tbfebe6bd38eebc6f8202e419c1171268987ea6a6;4ee3fcef1c800fa2bf23e20af7c83ff111d9c7ab\t1\n
o> bfebe6bd38eebc6f8202e419c1171268987ea6a6\t1\n
o> publishing\tTrue
response #0: bfebe6bd38eebc6f8202e419c1171268987ea6a6 4ee3fcef1c800fa2bf23e20af7c83ff111d9c7ab\n
response #1: bookA\t4ee3fcef1c800fa2bf23e20af7c83ff111d9c7ab\nbookB\tbfebe6bd38eebc6f8202e419c1171268987ea6a6
response #2: 4ee3fcef1c800fa2bf23e20af7c83ff111d9c7ab\t1\nbfebe6bd38eebc6f8202e419c1171268987ea6a6\t1\npublishing\tTrue
testing ssh2
creating ssh peer from handshake results
i> write(171) -> 171:
i> upgrade * proto=exp-ssh-v2-0003\n (glob)
i> hello\n
i> between\n
i> pairs 81\n
i> 0000000000000000000000000000000000000000-0000000000000000000000000000000000000000
i> flush() -> None
o> readline() -> 62:
o> upgraded * exp-ssh-v2-0003\n (glob)
o> readline() -> 4:
o> 462\n
o> read(462) -> 462: capabilities: batch branchmap $USUAL_BUNDLE2_CAPS$ changegroupsubset getbundle known lookup protocaps pushkey streamreqs=generaldelta,revlogv1,sparserevlog unbundle=HG10GZ,HG10BZ,HG10UN unbundlehash
o> read(1) -> 1:
o> \n
sending batch with 3 sub-commands
i> write(6) -> 6:
i> batch\n
i> write(4) -> 4:
i> * 0\n
i> write(8) -> 8:
i> cmds 61\n
i> write(61) -> 61: heads ;listkeys namespace=bookmarks;listkeys namespace=phases
i> flush() -> None
o> bufferedreadline() -> 4:
o> 278\n
o> bufferedread(278) -> 278:
o> bfebe6bd38eebc6f8202e419c1171268987ea6a6 4ee3fcef1c800fa2bf23e20af7c83ff111d9c7ab\n
o> ;bookA\t4ee3fcef1c800fa2bf23e20af7c83ff111d9c7ab\n
o> bookB\tbfebe6bd38eebc6f8202e419c1171268987ea6a6;4ee3fcef1c800fa2bf23e20af7c83ff111d9c7ab\t1\n
o> bfebe6bd38eebc6f8202e419c1171268987ea6a6\t1\n
o> publishing\tTrue
response #0: bfebe6bd38eebc6f8202e419c1171268987ea6a6 4ee3fcef1c800fa2bf23e20af7c83ff111d9c7ab\n
response #1: bookA\t4ee3fcef1c800fa2bf23e20af7c83ff111d9c7ab\nbookB\tbfebe6bd38eebc6f8202e419c1171268987ea6a6
response #2: 4ee3fcef1c800fa2bf23e20af7c83ff111d9c7ab\t1\nbfebe6bd38eebc6f8202e419c1171268987ea6a6\t1\npublishing\tTrue