view tests/test-convert-hg-startrev.t @ 23923:ab6fd3205dad stable

largefiles: fix commit of a directory with no largefile changes (issue4330)

When a directory is named in the commit file list, the previous behavior was to
walk the list, and if no normal files in the directory were also named, add the
corresponding standin for each largefile in that directory.  The directory is
then dropped from the list, so that committing a directory with no normal file
changes works.  It then added the corresponding standin directory for the first
largefile seen, by prefixing it with '.hglf/'.

The latter is unnecessary since each affected largefile is explicitly referenced
by its standin in the list.  It also caused an abort if there were no changed
largefiles in the directory, because none of its standins changed:

    abort: .hglf/foo/bar: no match under directory!

This list of files is used to tweak a matcher in lfutil.updatestandinsbymatch(),
which is what is passed to commit().

The status() call that is ultimately done in the commit code with this matcher
seems to have some OS specific differences.  It is not necessary to append '.'
for Windows to run the largefiles tests cleanly.  But if '.' is not added to the
list, the match function isn't called on Linux, so status() would miss any
normal files that were also in a named directory.  The commit then proceeds
without those normal files, or says "nothing changed" if there were no changed
largefiles in the directory.  This is not filesystem specific, as VFAT on Linux
had the same behavior as when run on ext4.  It is also not an issue with
lfilesrepo.status(), since that only calls the overridden implementation when
paths are passed to commit.  I dont have access to an OS X machine ATM to test
there.

Maybe there's a better way to do this.  But since the standin directory for the
first largefile was previously being added, and that caused the same walk in
status(), there's no preformance change to this.  There is no danger of
erroneously committing files in '.', because the original match function is
called, and if it fails, the lfutil.updatestandinsbymatch() tweaked matcher only
indicates a match if the file is in the list of standins- and '.' never is.  The
added tests confirm this.

  $ cat >> $HGRCPATH <<EOF
  > [extensions]
  > convert =
  > [convert]
  > hg.saverev = yes
  > EOF

  $ glog()
  > {
  >     hg -R "$1" log -G --template '{rev} "{desc}" files: {files}\n'
  > }

  $ hg init source
  $ cd source

  $ echo a > a
  $ echo b > b
  $ echo f > f
  $ hg ci -d '0 0' -qAm '0: add a b f'
  $ echo c > c
  $ hg move f d
  $ hg ci -d '1 0' -qAm '1: add c, move f to d'
  $ hg copy a e
  $ echo b >> b
  $ hg ci -d '2 0' -qAm '2: copy e from a, change b'
  $ hg up -C 0
  2 files updated, 0 files merged, 3 files removed, 0 files unresolved
  $ echo a >> a
  $ hg ci -d '3 0' -qAm '3: change a'
  $ hg merge
  merging a and e to e
  3 files updated, 1 files merged, 1 files removed, 0 files unresolved
  (branch merge, don't forget to commit)
  $ hg ci -d '4 0' -qAm '4: merge 2 and 3'
  $ echo a >> a
  $ hg ci -d '5 0' -qAm '5: change a'
  $ cd ..

Convert from null revision

  $ hg convert --config convert.hg.startrev=null source full
  initializing destination full repository
  scanning source...
  sorting...
  converting...
  5 0: add a b f
  4 1: add c, move f to d
  3 2: copy e from a, change b
  2 3: change a
  1 4: merge 2 and 3
  0 5: change a

  $ glog full
  o  5 "5: change a" files: a
  |
  o    4 "4: merge 2 and 3" files: e f
  |\
  | o  3 "3: change a" files: a
  | |
  o |  2 "2: copy e from a, change b" files: b e
  | |
  o |  1 "1: add c, move f to d" files: c d f
  |/
  o  0 "0: add a b f" files: a b f
  
  $ rm -Rf full

Convert from zero revision

  $ hg convert --config convert.hg.startrev=0 source full
  initializing destination full repository
  scanning source...
  sorting...
  converting...
  5 0: add a b f
  4 1: add c, move f to d
  3 2: copy e from a, change b
  2 3: change a
  1 4: merge 2 and 3
  0 5: change a

  $ glog full
  o  5 "5: change a" files: a
  |
  o    4 "4: merge 2 and 3" files: e f
  |\
  | o  3 "3: change a" files: a
  | |
  o |  2 "2: copy e from a, change b" files: b e
  | |
  o |  1 "1: add c, move f to d" files: c d f
  |/
  o  0 "0: add a b f" files: a b f
  
Convert from merge parent

  $ hg convert --config convert.hg.startrev=1 source conv1
  initializing destination conv1 repository
  scanning source...
  sorting...
  converting...
  3 1: add c, move f to d
  2 2: copy e from a, change b
  1 4: merge 2 and 3
  0 5: change a

  $ glog conv1
  o  3 "5: change a" files: a
  |
  o  2 "4: merge 2 and 3" files: a e
  |
  o  1 "2: copy e from a, change b" files: b e
  |
  o  0 "1: add c, move f to d" files: a b c d
  
  $ cd conv1
  $ hg up -q

Check copy preservation

  $ hg st -C --change 2 e
  M e
  $ hg st -C --change 1 e
  A e
    a
  $ hg st -C --change 0 a
  A a

(It seems like a bug in log that the following doesn't show rev 1.)

  $ hg log --follow --copies e
  changeset:   2:82bbac3d2cf4
  user:        test
  date:        Thu Jan 01 00:00:04 1970 +0000
  summary:     4: merge 2 and 3
  
  changeset:   0:23c3be426dce
  user:        test
  date:        Thu Jan 01 00:00:01 1970 +0000
  summary:     1: add c, move f to d
  
Check copy removal on missing parent

  $ hg log --follow --copies d
  changeset:   0:23c3be426dce
  user:        test
  date:        Thu Jan 01 00:00:01 1970 +0000
  summary:     1: add c, move f to d
  
  $ hg cat -r tip a b
  a
  a
  a
  b
  b
  $ hg -q verify
  $ cd ..

Convert from merge

  $ hg convert --config convert.hg.startrev=4 source conv4
  initializing destination conv4 repository
  scanning source...
  sorting...
  converting...
  1 4: merge 2 and 3
  0 5: change a
  $ glog conv4
  o  1 "5: change a" files: a
  |
  o  0 "4: merge 2 and 3" files: a b c d e
  
  $ cd conv4
  $ hg up -C
  5 files updated, 0 files merged, 0 files removed, 0 files unresolved
  $ hg cat -r tip a b
  a
  a
  a
  b
  b
  $ hg -q verify
  $ cd ..

Convert from revset in convert.hg.revs

  $ hg convert --config convert.hg.revs='3:4+0' source revsetrepo
  initializing destination revsetrepo repository
  scanning source...
  sorting...
  converting...
  2 0: add a b f
  1 3: change a
  0 4: merge 2 and 3

  $ glog revsetrepo
  o  2 "4: merge 2 and 3" files: b c d e f
  |
  o  1 "3: change a" files: a
  |
  o  0 "0: add a b f" files: a b f
  
  $ cd ..