view tests/test-copy.t @ 23923:ab6fd3205dad stable

largefiles: fix commit of a directory with no largefile changes (issue4330)

When a directory is named in the commit file list, the previous behavior was to
walk the list, and if no normal files in the directory were also named, add the
corresponding standin for each largefile in that directory.  The directory is
then dropped from the list, so that committing a directory with no normal file
changes works.  It then added the corresponding standin directory for the first
largefile seen, by prefixing it with '.hglf/'.

The latter is unnecessary since each affected largefile is explicitly referenced
by its standin in the list.  It also caused an abort if there were no changed
largefiles in the directory, because none of its standins changed:

    abort: .hglf/foo/bar: no match under directory!

This list of files is used to tweak a matcher in lfutil.updatestandinsbymatch(),
which is what is passed to commit().

The status() call that is ultimately done in the commit code with this matcher
seems to have some OS specific differences.  It is not necessary to append '.'
for Windows to run the largefiles tests cleanly.  But if '.' is not added to the
list, the match function isn't called on Linux, so status() would miss any
normal files that were also in a named directory.  The commit then proceeds
without those normal files, or says "nothing changed" if there were no changed
largefiles in the directory.  This is not filesystem specific, as VFAT on Linux
had the same behavior as when run on ext4.  It is also not an issue with
lfilesrepo.status(), since that only calls the overridden implementation when
paths are passed to commit.  I dont have access to an OS X machine ATM to test
there.

Maybe there's a better way to do this.  But since the standin directory for the
first largefile was previously being added, and that caused the same walk in
status(), there's no preformance change to this.  There is no danger of
erroneously committing files in '.', because the original match function is
called, and if it fails, the lfutil.updatestandinsbymatch() tweaked matcher only
indicates a match if the file is in the list of standins- and '.' never is.  The
added tests confirm this.

  $ mkdir part1
  $ cd part1

  $ hg init
  $ echo a > a
  $ hg add a
  $ hg commit -m "1"
  $ hg status
  $ hg copy a b
  $ hg --config ui.portablefilenames=abort copy a con.xml
  abort: filename contains 'con', which is reserved on Windows: 'con.xml'
  [255]
  $ hg status
  A b
  $ hg sum
  parent: 0:c19d34741b0a tip
   1
  branch: default
  commit: 1 copied
  update: (current)
  $ hg --debug commit -m "2"
  committing files:
  b
   b: copy a:b789fdd96dc2f3bd229c1dd8eedf0fc60e2b68e3
  committing manifest
  committing changelog
  committed changeset 1:93580a2c28a50a56f63526fb305067e6fbf739c4

we should see two history entries

  $ hg history -v
  changeset:   1:93580a2c28a5
  tag:         tip
  user:        test
  date:        Thu Jan 01 00:00:00 1970 +0000
  files:       b
  description:
  2
  
  
  changeset:   0:c19d34741b0a
  user:        test
  date:        Thu Jan 01 00:00:00 1970 +0000
  files:       a
  description:
  1
  
  

we should see one log entry for a

  $ hg log a
  changeset:   0:c19d34741b0a
  user:        test
  date:        Thu Jan 01 00:00:00 1970 +0000
  summary:     1
  

this should show a revision linked to changeset 0

  $ hg debugindex a
     rev    offset  length  ..... linkrev nodeid       p1           p2 (re)
       0         0       3  .....       0 b789fdd96dc2 000000000000 000000000000 (re)

we should see one log entry for b

  $ hg log b
  changeset:   1:93580a2c28a5
  tag:         tip
  user:        test
  date:        Thu Jan 01 00:00:00 1970 +0000
  summary:     2
  

this should show a revision linked to changeset 1

  $ hg debugindex b
     rev    offset  length  ..... linkrev nodeid       p1           p2 (re)
       0         0      65  .....       1 37d9b5d994ea 000000000000 000000000000 (re)

this should show the rename information in the metadata

  $ hg debugdata b 0 | head -3 | tail -2
  copy: a
  copyrev: b789fdd96dc2f3bd229c1dd8eedf0fc60e2b68e3

  $ "$TESTDIR/md5sum.py" .hg/store/data/b.i
  4999f120a3b88713bbefddd195cf5133  .hg/store/data/b.i
  $ hg cat b > bsum
  $ "$TESTDIR/md5sum.py" bsum
  60b725f10c9c85c70d97880dfe8191b3  bsum
  $ hg cat a > asum
  $ "$TESTDIR/md5sum.py" asum
  60b725f10c9c85c70d97880dfe8191b3  asum
  $ hg verify
  checking changesets
  checking manifests
  crosschecking files in changesets and manifests
  checking files
  2 files, 2 changesets, 2 total revisions

  $ cd ..


  $ mkdir part2
  $ cd part2

  $ hg init
  $ echo foo > foo
should fail - foo is not managed
  $ hg mv foo bar
  foo: not copying - file is not managed
  abort: no files to copy
  [255]
  $ hg st -A
  ? foo
  $ hg add foo
dry-run; print a warning that this is not a real copy; foo is added
  $ hg mv --dry-run foo bar
  foo has not been committed yet, so no copy data will be stored for bar.
  $ hg st -A
  A foo
should print a warning that this is not a real copy; bar is added
  $ hg mv foo bar
  foo has not been committed yet, so no copy data will be stored for bar.
  $ hg st -A
  A bar
should print a warning that this is not a real copy; foo is added
  $ hg cp bar foo
  bar has not been committed yet, so no copy data will be stored for foo.
  $ hg rm -f bar
  $ rm bar
  $ hg st -A
  A foo
  $ hg commit -m1

moving a missing file
  $ rm foo
  $ hg mv foo foo3
  foo: deleted in working copy
  foo3 does not exist!
  $ hg up -qC .

copy --after to a nonexistent target filename
  $ hg cp -A foo dummy
  foo: not recording copy - dummy does not exist

dry-run; should show that foo is clean
  $ hg copy --dry-run foo bar
  $ hg st -A
  C foo
should show copy
  $ hg copy foo bar
  $ hg st -C
  A bar
    foo

shouldn't show copy
  $ hg commit -m2
  $ hg st -C

should match
  $ hg debugindex foo
     rev    offset  length  ..... linkrev nodeid       p1           p2 (re)
       0         0       5  .....       0 2ed2a3912a0b 000000000000 000000000000 (re)
  $ hg debugrename bar
  bar renamed from foo:2ed2a3912a0b24502043eae84ee4b279c18b90dd

  $ echo bleah > foo
  $ echo quux > bar
  $ hg commit -m3

should not be renamed
  $ hg debugrename bar
  bar not renamed

  $ hg copy -f foo bar
should show copy
  $ hg st -C
  M bar
    foo
  $ hg commit -m3

should show no parents for tip
  $ hg debugindex bar
     rev    offset  length  ..... linkrev nodeid       p1           p2 (re)
       0         0      69  .....       1 7711d36246cc 000000000000 000000000000 (re)
       1        69       6  .....       2 bdf70a2b8d03 7711d36246cc 000000000000 (re)
       2        75      71  .....       3 b2558327ea8d 000000000000 000000000000 (re)
should match
  $ hg debugindex foo
     rev    offset  length  ..... linkrev nodeid       p1           p2 (re)
       0         0       5  .....       0 2ed2a3912a0b 000000000000 000000000000 (re)
       1         5       7  .....       2 dd12c926cf16 2ed2a3912a0b 000000000000 (re)
  $ hg debugrename bar
  bar renamed from foo:dd12c926cf165e3eb4cf87b084955cb617221c17

should show no copies
  $ hg st -C

copy --after on an added file
  $ cp bar baz
  $ hg add baz
  $ hg cp -A bar baz
  $ hg st -C
  A baz
    bar

foo was clean:
  $ hg st -AC foo
  C foo
but it's considered modified after a copy --after --force
  $ hg copy -Af bar foo
  $ hg st -AC foo
  M foo
    bar

  $ cd ..