view tests/test-largefiles-wireproto.t @ 23923:ab6fd3205dad stable

largefiles: fix commit of a directory with no largefile changes (issue4330)

When a directory is named in the commit file list, the previous behavior was to
walk the list, and if no normal files in the directory were also named, add the
corresponding standin for each largefile in that directory.  The directory is
then dropped from the list, so that committing a directory with no normal file
changes works.  It then added the corresponding standin directory for the first
largefile seen, by prefixing it with '.hglf/'.

The latter is unnecessary since each affected largefile is explicitly referenced
by its standin in the list.  It also caused an abort if there were no changed
largefiles in the directory, because none of its standins changed:

    abort: .hglf/foo/bar: no match under directory!

This list of files is used to tweak a matcher in lfutil.updatestandinsbymatch(),
which is what is passed to commit().

The status() call that is ultimately done in the commit code with this matcher
seems to have some OS specific differences.  It is not necessary to append '.'
for Windows to run the largefiles tests cleanly.  But if '.' is not added to the
list, the match function isn't called on Linux, so status() would miss any
normal files that were also in a named directory.  The commit then proceeds
without those normal files, or says "nothing changed" if there were no changed
largefiles in the directory.  This is not filesystem specific, as VFAT on Linux
had the same behavior as when run on ext4.  It is also not an issue with
lfilesrepo.status(), since that only calls the overridden implementation when
paths are passed to commit.  I dont have access to an OS X machine ATM to test
there.

Maybe there's a better way to do this.  But since the standin directory for the
first largefile was previously being added, and that caused the same walk in
status(), there's no preformance change to this.  There is no danger of
erroneously committing files in '.', because the original match function is
called, and if it fails, the lfutil.updatestandinsbymatch() tweaked matcher only
indicates a match if the file is in the list of standins- and '.' never is.  The
added tests confirm this.

This file contains testcases that tend to be related to the wire protocol part
of largefiles.

  $ USERCACHE="$TESTTMP/cache"; export USERCACHE
  $ mkdir "${USERCACHE}"
  $ cat >> $HGRCPATH <<EOF
  > [extensions]
  > largefiles=
  > purge=
  > rebase=
  > transplant=
  > [phases]
  > publish=False
  > [largefiles]
  > minsize=2
  > patterns=glob:**.dat
  > usercache=${USERCACHE}
  > [hooks]
  > precommit=sh -c "echo \\"Invoking status precommit hook\\"; hg status"
  > EOF


#if serve
vanilla clients not locked out from largefiles servers on vanilla repos
  $ mkdir r1
  $ cd r1
  $ hg init
  $ echo c1 > f1
  $ hg add f1
  $ hg commit -m "m1"
  Invoking status precommit hook
  A f1
  $ cd ..
  $ hg serve -R r1 -d -p $HGPORT --pid-file hg.pid
  $ cat hg.pid >> $DAEMON_PIDS
  $ hg --config extensions.largefiles=! clone http://localhost:$HGPORT r2
  requesting all changes
  adding changesets
  adding manifests
  adding file changes
  added 1 changesets with 1 changes to 1 files
  updating to branch default
  1 files updated, 0 files merged, 0 files removed, 0 files unresolved

largefiles clients still work with vanilla servers
  $ hg --config extensions.largefiles=! serve -R r1 -d -p $HGPORT1 --pid-file hg.pid
  $ cat hg.pid >> $DAEMON_PIDS
  $ hg clone http://localhost:$HGPORT1 r3
  requesting all changes
  adding changesets
  adding manifests
  adding file changes
  added 1 changesets with 1 changes to 1 files
  updating to branch default
  1 files updated, 0 files merged, 0 files removed, 0 files unresolved
#endif

vanilla clients locked out from largefiles http repos
  $ mkdir r4
  $ cd r4
  $ hg init
  $ echo c1 > f1
  $ hg add --large f1
  $ hg commit -m "m1"
  Invoking status precommit hook
  A f1
  $ cd ..

largefiles can be pushed locally (issue3583)
  $ hg init dest
  $ cd r4
  $ hg outgoing ../dest
  comparing with ../dest
  searching for changes
  changeset:   0:639881c12b4c
  tag:         tip
  user:        test
  date:        Thu Jan 01 00:00:00 1970 +0000
  summary:     m1
  
  $ hg push ../dest
  pushing to ../dest
  searching for changes
  adding changesets
  adding manifests
  adding file changes
  added 1 changesets with 1 changes to 1 files

exit code with nothing outgoing (issue3611)
  $ hg outgoing ../dest
  comparing with ../dest
  searching for changes
  no changes found
  [1]
  $ cd ..

#if serve
  $ hg serve -R r4 -d -p $HGPORT2 --pid-file hg.pid
  $ cat hg.pid >> $DAEMON_PIDS
  $ hg --config extensions.largefiles=! clone http://localhost:$HGPORT2 r5
  abort: remote error:
  
  This repository uses the largefiles extension.
  
  Please enable it in your Mercurial config file.
  [255]

used all HGPORTs, kill all daemons
  $ "$TESTDIR/killdaemons.py" $DAEMON_PIDS
#endif

vanilla clients locked out from largefiles ssh repos
  $ hg --config extensions.largefiles=! clone -e "python \"$TESTDIR/dummyssh\"" ssh://user@dummy/r4 r5
  abort: remote error:
  
  This repository uses the largefiles extension.
  
  Please enable it in your Mercurial config file.
  [255]

#if serve

largefiles clients refuse to push largefiles repos to vanilla servers
  $ mkdir r6
  $ cd r6
  $ hg init
  $ echo c1 > f1
  $ hg add f1
  $ hg commit -m "m1"
  Invoking status precommit hook
  A f1
  $ cat >> .hg/hgrc <<!
  > [web]
  > push_ssl = false
  > allow_push = *
  > !
  $ cd ..
  $ hg clone r6 r7
  updating to branch default
  1 files updated, 0 files merged, 0 files removed, 0 files unresolved
  $ cd r7
  $ echo c2 > f2
  $ hg add --large f2
  $ hg commit -m "m2"
  Invoking status precommit hook
  A f2
  $ hg --config extensions.largefiles=! -R ../r6 serve -d -p $HGPORT --pid-file ../hg.pid
  $ cat ../hg.pid >> $DAEMON_PIDS
  $ hg push http://localhost:$HGPORT
  pushing to http://localhost:$HGPORT/
  searching for changes
  abort: http://localhost:$HGPORT/ does not appear to be a largefile store
  [255]
  $ cd ..

putlfile errors are shown (issue3123)
Corrupt the cached largefile in r7 and move it out of the servers usercache
  $ mv r7/.hg/largefiles/4cdac4d8b084d0b599525cf732437fb337d422a8 .
  $ echo 'client side corruption' > r7/.hg/largefiles/4cdac4d8b084d0b599525cf732437fb337d422a8
  $ rm "$USERCACHE/4cdac4d8b084d0b599525cf732437fb337d422a8"
  $ hg init empty
  $ hg serve -R empty -d -p $HGPORT1 --pid-file hg.pid \
  >   --config 'web.allow_push=*' --config web.push_ssl=False
  $ cat hg.pid >> $DAEMON_PIDS
  $ hg push -R r7 http://localhost:$HGPORT1
  pushing to http://localhost:$HGPORT1/
  searching for changes
  remote: largefiles: failed to put 4cdac4d8b084d0b599525cf732437fb337d422a8 into store: largefile contents do not match hash
  abort: remotestore: could not put $TESTTMP/r7/.hg/largefiles/4cdac4d8b084d0b599525cf732437fb337d422a8 to remote store http://localhost:$HGPORT1/ (glob)
  [255]
  $ mv 4cdac4d8b084d0b599525cf732437fb337d422a8 r7/.hg/largefiles/4cdac4d8b084d0b599525cf732437fb337d422a8
Push of file that exists on server but is corrupted - magic healing would be nice ... but too magic
  $ echo "server side corruption" > empty/.hg/largefiles/4cdac4d8b084d0b599525cf732437fb337d422a8
  $ hg push -R r7 http://localhost:$HGPORT1
  pushing to http://localhost:$HGPORT1/
  searching for changes
  remote: adding changesets
  remote: adding manifests
  remote: adding file changes
  remote: added 2 changesets with 2 changes to 2 files
  $ cat empty/.hg/largefiles/4cdac4d8b084d0b599525cf732437fb337d422a8
  server side corruption
  $ rm -rf empty

Push a largefiles repository to a served empty repository
  $ hg init r8
  $ echo c3 > r8/f1
  $ hg add --large r8/f1 -R r8
  $ hg commit -m "m1" -R r8
  Invoking status precommit hook
  A f1
  $ hg init empty
  $ hg serve -R empty -d -p $HGPORT2 --pid-file hg.pid \
  >   --config 'web.allow_push=*' --config web.push_ssl=False
  $ cat hg.pid >> $DAEMON_PIDS
  $ rm "${USERCACHE}"/*
  $ hg push -R r8 http://localhost:$HGPORT2/#default
  pushing to http://localhost:$HGPORT2/
  searching for changes
  remote: adding changesets
  remote: adding manifests
  remote: adding file changes
  remote: added 1 changesets with 1 changes to 1 files
  $ [ -f "${USERCACHE}"/02a439e5c31c526465ab1a0ca1f431f76b827b90 ]
  $ [ -f empty/.hg/largefiles/02a439e5c31c526465ab1a0ca1f431f76b827b90 ]

Clone over http, no largefiles pulled on clone.

  $ hg clone http://localhost:$HGPORT2/#default http-clone -U
  adding changesets
  adding manifests
  adding file changes
  added 1 changesets with 1 changes to 1 files

test 'verify' with remotestore:

  $ rm "${USERCACHE}"/02a439e5c31c526465ab1a0ca1f431f76b827b90
  $ mv empty/.hg/largefiles/02a439e5c31c526465ab1a0ca1f431f76b827b90 .
  $ hg -R http-clone verify --large --lfa
  checking changesets
  checking manifests
  crosschecking files in changesets and manifests
  checking files
  1 files, 1 changesets, 1 total revisions
  searching 1 changesets for largefiles
  changeset 0:cf03e5bb9936: f1 missing
  verified existence of 1 revisions of 1 largefiles
  [1]
  $ mv 02a439e5c31c526465ab1a0ca1f431f76b827b90 empty/.hg/largefiles/
  $ hg -R http-clone -q verify --large --lfa

largefiles pulled on update - a largefile missing on the server:
  $ mv empty/.hg/largefiles/02a439e5c31c526465ab1a0ca1f431f76b827b90 .
  $ hg -R http-clone up --config largefiles.usercache=http-clone-usercache
  getting changed largefiles
  f1: largefile 02a439e5c31c526465ab1a0ca1f431f76b827b90 not available from http://localhost:$HGPORT2/
  0 largefiles updated, 0 removed
  1 files updated, 0 files merged, 0 files removed, 0 files unresolved
  $ hg -R http-clone st
  ! f1
  $ hg -R http-clone up -Cqr null

largefiles pulled on update - a largefile corrupted on the server:
  $ echo corruption > empty/.hg/largefiles/02a439e5c31c526465ab1a0ca1f431f76b827b90
  $ hg -R http-clone up --config largefiles.usercache=http-clone-usercache
  getting changed largefiles
  f1: data corruption (expected 02a439e5c31c526465ab1a0ca1f431f76b827b90, got 6a7bb2556144babe3899b25e5428123735bb1e27)
  0 largefiles updated, 0 removed
  1 files updated, 0 files merged, 0 files removed, 0 files unresolved
  $ hg -R http-clone st
  ! f1
  $ [ ! -f http-clone/.hg/largefiles/02a439e5c31c526465ab1a0ca1f431f76b827b90 ]
  $ [ ! -f http-clone/f1 ]
  $ [ ! -f http-clone-usercache ]
  $ hg -R http-clone verify --large --lfc
  checking changesets
  checking manifests
  crosschecking files in changesets and manifests
  checking files
  1 files, 1 changesets, 1 total revisions
  searching 1 changesets for largefiles
  verified contents of 1 revisions of 1 largefiles
  $ hg -R http-clone up -Cqr null

largefiles pulled on update - no server side problems:
  $ mv 02a439e5c31c526465ab1a0ca1f431f76b827b90 empty/.hg/largefiles/
  $ hg -R http-clone --debug up --config largefiles.usercache=http-clone-usercache
  resolving manifests
   branchmerge: False, force: False, partial: False
   ancestor: 000000000000, local: 000000000000+, remote: cf03e5bb9936
   .hglf/f1: remote created -> g
  getting .hglf/f1
  updating: .hglf/f1 1/1 files (100.00%)
  getting changed largefiles
  using http://localhost:$HGPORT2/
  sending capabilities command
  sending batch command
  getting largefiles: 0/1 lfile (0.00%)
  getting f1:02a439e5c31c526465ab1a0ca1f431f76b827b90
  sending getlfile command
  found 02a439e5c31c526465ab1a0ca1f431f76b827b90 in store
  1 largefiles updated, 0 removed
  1 files updated, 0 files merged, 0 files removed, 0 files unresolved

  $ ls http-clone-usercache/*
  http-clone-usercache/02a439e5c31c526465ab1a0ca1f431f76b827b90

  $ rm -rf empty http-clone*

used all HGPORTs, kill all daemons
  $ "$TESTDIR/killdaemons.py" $DAEMON_PIDS

#endif