view tests/test-strip-cross.t @ 23923:ab6fd3205dad stable

largefiles: fix commit of a directory with no largefile changes (issue4330)

When a directory is named in the commit file list, the previous behavior was to
walk the list, and if no normal files in the directory were also named, add the
corresponding standin for each largefile in that directory.  The directory is
then dropped from the list, so that committing a directory with no normal file
changes works.  It then added the corresponding standin directory for the first
largefile seen, by prefixing it with '.hglf/'.

The latter is unnecessary since each affected largefile is explicitly referenced
by its standin in the list.  It also caused an abort if there were no changed
largefiles in the directory, because none of its standins changed:

    abort: .hglf/foo/bar: no match under directory!

This list of files is used to tweak a matcher in lfutil.updatestandinsbymatch(),
which is what is passed to commit().

The status() call that is ultimately done in the commit code with this matcher
seems to have some OS specific differences.  It is not necessary to append '.'
for Windows to run the largefiles tests cleanly.  But if '.' is not added to the
list, the match function isn't called on Linux, so status() would miss any
normal files that were also in a named directory.  The commit then proceeds
without those normal files, or says "nothing changed" if there were no changed
largefiles in the directory.  This is not filesystem specific, as VFAT on Linux
had the same behavior as when run on ext4.  It is also not an issue with
lfilesrepo.status(), since that only calls the overridden implementation when
paths are passed to commit.  I dont have access to an OS X machine ATM to test
there.

Maybe there's a better way to do this.  But since the standin directory for the
first largefile was previously being added, and that caused the same walk in
status(), there's no preformance change to this.  There is no danger of
erroneously committing files in '.', because the original match function is
called, and if it fails, the lfutil.updatestandinsbymatch() tweaked matcher only
indicates a match if the file is in the list of standins- and '.' never is.  The
added tests confirm this.

test stripping of filelogs where the linkrev doesn't always increase

  $ echo '[extensions]' >> $HGRCPATH
  $ echo 'strip =' >> $HGRCPATH
  $ hg init orig
  $ cd orig
  $ commit()
  > {
  >     hg up -qC null
  >     count=1
  >     for i in "$@"; do
  >         for f in $i; do
  >             echo $count > $f
  >         done
  >         count=`expr $count + 1`
  >     done
  >     hg commit -qAm "$*"
  > }

2 1 0 2 0 1 2

  $ commit '201 210'
  $ commit '102 120' '210'
  $ commit '021'
  $ commit '201' '021 120'
  $ commit '012 021' '102 201' '120 210'
  $ commit 'manifest-file'
  $ commit '102 120' '012 210' '021 201'
  $ commit '201 210' '021 120' '012 102'
  $ HGUSER=another-user; export HGUSER
  $ commit 'manifest-file'
  $ commit '012' 'manifest-file'
  $ cd ..
  $ hg clone -q -U -r -1 -r -2 -r -3 -r -4 -r -6 orig crossed
  $ cd crossed
  $ hg debugindex --manifest
     rev    offset  length  ..... linkrev nodeid       p1           p2 (re)
       0         0     112  .....       0 6f105cbb914d 000000000000 000000000000 (re)
       1       112      56  .....       3 1b55917b3699 000000000000 000000000000 (re)
       2       168     123  .....       1 8f3d04e263e5 000000000000 000000000000 (re)
       3       291     122  .....       2 f0ef8726ac4f 000000000000 000000000000 (re)
       4       413      87  .....       4 0b76e38b4070 000000000000 000000000000 (re)

  $ for i in 012 021 102 120 201 210 manifest-file; do
  >     echo $i
  >     hg debugindex $i
  >     echo
  > done
  012
     rev    offset  length  ..... linkrev nodeid       p1           p2 (re)
       0         0       3  .....       0 b8e02f643373 000000000000 000000000000 (re)
       1         3       3  .....       1 5d9299349fc0 000000000000 000000000000 (re)
       2         6       3  .....       2 2661d26c6496 000000000000 000000000000 (re)
  
  021
     rev    offset  length  ..... linkrev nodeid       p1           p2 (re)
       0         0       3  .....       0 b8e02f643373 000000000000 000000000000 (re)
       1         3       3  .....       2 5d9299349fc0 000000000000 000000000000 (re)
       2         6       3  .....       1 2661d26c6496 000000000000 000000000000 (re)
  
  102
     rev    offset  length  ..... linkrev nodeid       p1           p2 (re)
       0         0       3  .....       1 b8e02f643373 000000000000 000000000000 (re)
       1         3       3  .....       0 5d9299349fc0 000000000000 000000000000 (re)
       2         6       3  .....       2 2661d26c6496 000000000000 000000000000 (re)
  
  120
     rev    offset  length  ..... linkrev nodeid       p1           p2 (re)
       0         0       3  .....       1 b8e02f643373 000000000000 000000000000 (re)
       1         3       3  .....       2 5d9299349fc0 000000000000 000000000000 (re)
       2         6       3  .....       0 2661d26c6496 000000000000 000000000000 (re)
  
  201
     rev    offset  length  ..... linkrev nodeid       p1           p2 (re)
       0         0       3  .....       2 b8e02f643373 000000000000 000000000000 (re)
       1         3       3  .....       0 5d9299349fc0 000000000000 000000000000 (re)
       2         6       3  .....       1 2661d26c6496 000000000000 000000000000 (re)
  
  210
     rev    offset  length  ..... linkrev nodeid       p1           p2 (re)
       0         0       3  .....       2 b8e02f643373 000000000000 000000000000 (re)
       1         3       3  .....       1 5d9299349fc0 000000000000 000000000000 (re)
       2         6       3  .....       0 2661d26c6496 000000000000 000000000000 (re)
  
  manifest-file
     rev    offset  length  ..... linkrev nodeid       p1           p2 (re)
       0         0       3  .....       3 b8e02f643373 000000000000 000000000000 (re)
       1         3       3  .....       4 5d9299349fc0 000000000000 000000000000 (re)
  
  $ cd ..
  $ for i in 0 1 2 3 4; do
  >     hg clone -q -U --pull crossed $i
  >     echo "% Trying to strip revision $i"
  >     hg --cwd $i strip $i
  >     echo "% Verifying"
  >     hg --cwd $i verify
  >     echo
  > done
  % Trying to strip revision 0
  saved backup bundle to $TESTTMP/0/.hg/strip-backup/*-backup.hg (glob)
  % Verifying
  checking changesets
  checking manifests
  crosschecking files in changesets and manifests
  checking files
  7 files, 4 changesets, 15 total revisions
  
  % Trying to strip revision 1
  saved backup bundle to $TESTTMP/1/.hg/strip-backup/*-backup.hg (glob)
  % Verifying
  checking changesets
  checking manifests
  crosschecking files in changesets and manifests
  checking files
  7 files, 4 changesets, 14 total revisions
  
  % Trying to strip revision 2
  saved backup bundle to $TESTTMP/2/.hg/strip-backup/*-backup.hg (glob)
  % Verifying
  checking changesets
  checking manifests
  crosschecking files in changesets and manifests
  checking files
  7 files, 4 changesets, 14 total revisions
  
  % Trying to strip revision 3
  saved backup bundle to $TESTTMP/3/.hg/strip-backup/*-backup.hg (glob)
  % Verifying
  checking changesets
  checking manifests
  crosschecking files in changesets and manifests
  checking files
  7 files, 4 changesets, 19 total revisions
  
  % Trying to strip revision 4
  saved backup bundle to $TESTTMP/4/.hg/strip-backup/*-backup.hg (glob)
  % Verifying
  checking changesets
  checking manifests
  crosschecking files in changesets and manifests
  checking files
  7 files, 4 changesets, 19 total revisions