view Makefile @ 30224:ad56071b37d4 stable

dirstate: fix debug.dirstate.delaywrite to use the new "now" after sleeping

It seems like the a regression has sneaked into debug.dirstate.delaywrite in
6c6b48aca328. It would sleep until no files were modified "now" any more, but
when writing the dirstate it would use the old "now" and still mark files as
'unset' instead of recording the timestamp that would make the file show up as
clean instead of unknown.

Instead of getting a new "now" from the file system, we trust the computed end
time as the new "now" and thus cause the actual modification time to be
writiten to the dirstate.

debug.dirstate.delaywrite is undocumented and only used in
test-largefiles-update.t . All tests seems to work fine for me without
debug.dirstate.delaywrite . Perhaps because it not really worked as intended
without the fix in this patch, and code and tests thus have evolved to do fine
without it? It could thus perhaps make sense to drop usage of this setting in
the tests. That could speed the test up a bit.

This functionality (or something very similar) can however apparently be very
convenient in setups where checking dirty-ness is expensive - such as when
using large files and have slow file filesystems or are CPU constrained. Now it
works and we can try it. (But ideally, for the largefile use case, it should
probably only delay lfdirstate writes - not ordinary dirstate.)

# If you want to change PREFIX, do not just edit it below. The changed
# value wont get passed on to recursive make calls. You should instead
# override the variable on the command like:
#
# % make PREFIX=/opt/ install

export PREFIX=/usr/local
PYTHON=python
$(eval HGROOT := $(shell pwd))
HGPYTHONS ?= $(HGROOT)/build/pythons
PURE=
PYFILES:=$(shell find mercurial hgext doc -name '*.py')
DOCFILES=mercurial/help/*.txt
export LANGUAGE=C
export LC_ALL=C
TESTFLAGS ?= $(shell echo $$HGTESTFLAGS)

# Set this to e.g. "mingw32" to use a non-default compiler.
COMPILER=

COMPILERFLAG_tmp_ =
COMPILERFLAG_tmp_${COMPILER} ?= -c $(COMPILER)
COMPILERFLAG=${COMPILERFLAG_tmp_${COMPILER}}

help:
	@echo 'Commonly used make targets:'
	@echo '  all          - build program and documentation'
	@echo '  install      - install program and man pages to $$PREFIX ($(PREFIX))'
	@echo '  install-home - install with setup.py install --home=$$HOME ($(HOME))'
	@echo '  local        - build for inplace usage'
	@echo '  tests        - run all tests in the automatic test suite'
	@echo '  test-foo     - run only specified tests (e.g. test-merge1.t)'
	@echo '  dist         - run all tests and create a source tarball in dist/'
	@echo '  clean        - remove files created by other targets'
	@echo '                 (except installed files or dist source tarball)'
	@echo '  update-pot   - update i18n/hg.pot'
	@echo
	@echo 'Example for a system-wide installation under /usr/local:'
	@echo '  make all && su -c "make install" && hg version'
	@echo
	@echo 'Example for a local installation (usable in this directory):'
	@echo '  make local && ./hg version'

all: build doc

local:
	$(PYTHON) setup.py $(PURE) \
	  build_py -c -d . \
	  build_ext $(COMPILERFLAG) -i \
	  build_hgexe $(COMPILERFLAG) -i \
	  build_mo
	env HGRCPATH= $(PYTHON) hg version

build:
	$(PYTHON) setup.py $(PURE) build $(COMPILERFLAG)

wheel:
	FORCE_SETUPTOOLS=1 $(PYTHON) setup.py $(PURE) bdist_wheel $(COMPILERFLAG)

doc:
	$(MAKE) -C doc

cleanbutpackages:
	-$(PYTHON) setup.py clean --all # ignore errors from this command
	find contrib doc hgext hgext3rd i18n mercurial tests \
		\( -name '*.py[cdo]' -o -name '*.so' \) -exec rm -f '{}' ';'
	rm -f $(addprefix mercurial/,$(notdir $(wildcard mercurial/pure/[a-z]*.py)))
	rm -f MANIFEST MANIFEST.in hgext/__index__.py tests/*.err
	rm -f mercurial/__modulepolicy__.py
	if test -d .hg; then rm -f mercurial/__version__.py; fi
	rm -rf build mercurial/locale
	$(MAKE) -C doc clean
	$(MAKE) -C contrib/chg distclean

clean: cleanbutpackages
	rm -rf packages

install: install-bin install-doc

install-bin: build
	$(PYTHON) setup.py $(PURE) install --root="$(DESTDIR)/" --prefix="$(PREFIX)" --force

install-doc: doc
	cd doc && $(MAKE) $(MFLAGS) install

install-home: install-home-bin install-home-doc

install-home-bin: build
	$(PYTHON) setup.py $(PURE) install --home="$(HOME)" --prefix="" --force

install-home-doc: doc
	cd doc && $(MAKE) $(MFLAGS) PREFIX="$(HOME)" install

MANIFEST-doc:
	$(MAKE) -C doc MANIFEST

MANIFEST.in: MANIFEST-doc
	hg manifest | sed -e 's/^/include /' > MANIFEST.in
	echo include mercurial/__version__.py >> MANIFEST.in
	sed -e 's/^/include /' < doc/MANIFEST >> MANIFEST.in

dist:	tests dist-notests

dist-notests:	doc MANIFEST.in
	TAR_OPTIONS="--owner=root --group=root --mode=u+w,go-w,a+rX-s" $(PYTHON) setup.py -q sdist

check: tests

tests:
	cd tests && $(PYTHON) run-tests.py $(TESTFLAGS)

test-%:
	cd tests && $(PYTHON) run-tests.py $(TESTFLAGS) $@

testpy-%:
	@echo Looking for Python $* in $(HGPYTHONS)
	[ -e $(HGPYTHONS)/$*/bin/python ] || ( \
	cd $$(mktemp --directory --tmpdir) && \
        $(MAKE) -f $(HGROOT)/contrib/Makefile.python PYTHONVER=$* PREFIX=$(HGPYTHONS)/$* python )
	cd tests && $(HGPYTHONS)/$*/bin/python run-tests.py $(TESTFLAGS)

check-code:
	hg manifest | xargs python contrib/check-code.py

update-pot: i18n/hg.pot

i18n/hg.pot: $(PYFILES) $(DOCFILES) i18n/posplit i18n/hggettext
	$(PYTHON) i18n/hggettext mercurial/commands.py \
	  hgext/*.py hgext/*/__init__.py \
	  mercurial/fileset.py mercurial/revset.py \
	  mercurial/templatefilters.py mercurial/templatekw.py \
	  mercurial/templater.py \
	  mercurial/filemerge.py \
	  mercurial/hgweb/webcommands.py \
	  $(DOCFILES) > i18n/hg.pot.tmp
        # All strings marked for translation in Mercurial contain
        # ASCII characters only. But some files contain string
        # literals like this '\037\213'. xgettext thinks it has to
        # parse them even though they are not marked for translation.
        # Extracting with an explicit encoding of ISO-8859-1 will make
        # xgettext "parse" and ignore them.
	echo $(PYFILES) | xargs \
	  xgettext --package-name "Mercurial" \
	  --msgid-bugs-address "<[e-mail]>" \
	  --copyright-holder "Matt Mackall <[e-mail]> and others" \
	  --from-code ISO-8859-1 --join --sort-by-file --add-comments=i18n: \
	  -d hg -p i18n -o hg.pot.tmp
	$(PYTHON) i18n/posplit i18n/hg.pot.tmp
        # The target file is not created before the last step. So it never is in
        # an intermediate state.
	mv -f i18n/hg.pot.tmp i18n/hg.pot

%.po: i18n/hg.pot
        # work on a temporary copy for never having a half completed target
	cp $@ $@.tmp
	msgmerge --no-location --update $@.tmp $^
	mv -f $@.tmp $@

# Packaging targets

osx:
	/usr/bin/python2.7 setup.py install --optimize=1 \
	  --root=build/mercurial/ --prefix=/usr/local/ \
	  --install-lib=/Library/Python/2.7/site-packages/
	make -C doc all install DESTDIR="$(PWD)/build/mercurial/"
	mkdir -p $${OUTPUTDIR:-dist}
	HGVER=$$((cat build/mercurial/Library/Python/2.7/site-packages/mercurial/__version__.py; echo 'print(version)') | python) && \
	OSXVER=$$(sw_vers -productVersion | cut -d. -f1,2) && \
	pkgbuild --root build/mercurial/ \
	  --identifier org.mercurial-scm.mercurial \
	  --version "$${HGVER}" \
	  build/mercurial.pkg && \
	productbuild --distribution contrib/macosx/distribution.xml \
	  --package-path build/ \
	  --version "$${HGVER}" \
	  --resources contrib/macosx/ \
	  "$${OUTPUTDIR:-dist/}"/Mercurial-"$${HGVER}"-macosx"$${OSXVER}".pkg

deb:
	contrib/builddeb

ppa:
	contrib/builddeb --source-only

docker-debian-jessie:
	mkdir -p packages/debian-jessie
	contrib/dockerdeb debian jessie

contrib/docker/ubuntu-%: contrib/docker/ubuntu.template
	sed "s/__CODENAME__/$*/" $< > $@

docker-ubuntu-trusty: contrib/docker/ubuntu-trusty
	contrib/dockerdeb ubuntu trusty

docker-ubuntu-trusty-ppa: contrib/docker/ubuntu-trusty
	contrib/dockerdeb ubuntu trusty --source-only

docker-ubuntu-wily: contrib/docker/ubuntu-wily
	contrib/dockerdeb ubuntu wily

docker-ubuntu-wily-ppa: contrib/docker/ubuntu-wily
	contrib/dockerdeb ubuntu wily --source-only

docker-ubuntu-xenial: contrib/docker/ubuntu-xenial
	contrib/dockerdeb ubuntu xenial

docker-ubuntu-xenial-ppa: contrib/docker/ubuntu-xenial
	contrib/dockerdeb ubuntu xenial --source-only

fedora20:
	mkdir -p packages/fedora20
	contrib/buildrpm
	cp rpmbuild/RPMS/*/* packages/fedora20
	cp rpmbuild/SRPMS/* packages/fedora20
	rm -rf rpmbuild

docker-fedora20:
	mkdir -p packages/fedora20
	contrib/dockerrpm fedora20

fedora21:
	mkdir -p packages/fedora21
	contrib/buildrpm
	cp rpmbuild/RPMS/*/* packages/fedora21
	cp rpmbuild/SRPMS/* packages/fedora21
	rm -rf rpmbuild

docker-fedora21:
	mkdir -p packages/fedora21
	contrib/dockerrpm fedora21

centos5:
	mkdir -p packages/centos5
	contrib/buildrpm --withpython
	cp rpmbuild/RPMS/*/* packages/centos5
	cp rpmbuild/SRPMS/* packages/centos5

docker-centos5:
	mkdir -p packages/centos5
	contrib/dockerrpm centos5 --withpython

centos6:
	mkdir -p packages/centos6
	contrib/buildrpm
	cp rpmbuild/RPMS/*/* packages/centos6
	cp rpmbuild/SRPMS/* packages/centos6

docker-centos6:
	mkdir -p packages/centos6
	contrib/dockerrpm centos6

centos7:
	mkdir -p packages/centos7
	contrib/buildrpm
	cp rpmbuild/RPMS/*/* packages/centos7
	cp rpmbuild/SRPMS/* packages/centos7

docker-centos7:
	mkdir -p packages/centos7
	contrib/dockerrpm centos7

.PHONY: help all local build doc cleanbutpackages clean install install-bin \
	install-doc install-home install-home-bin install-home-doc \
	dist dist-notests check tests check-code update-pot \
	osx fedora20 docker-fedora20 fedora21 docker-fedora21 \
	centos5 docker-centos5 centos6 docker-centos6 centos7 docker-centos7