dirstate: fix debug.dirstate.delaywrite to use the new "now" after sleeping
It seems like the a regression has sneaked into debug.dirstate.delaywrite in
6c6b48aca328. It would sleep until no files were modified "now" any more, but
when writing the dirstate it would use the old "now" and still mark files as
'unset' instead of recording the timestamp that would make the file show up as
clean instead of unknown.
Instead of getting a new "now" from the file system, we trust the computed end
time as the new "now" and thus cause the actual modification time to be
writiten to the dirstate.
debug.dirstate.delaywrite is undocumented and only used in
test-largefiles-update.t . All tests seems to work fine for me without
debug.dirstate.delaywrite . Perhaps because it not really worked as intended
without the fix in this patch, and code and tests thus have evolved to do fine
without it? It could thus perhaps make sense to drop usage of this setting in
the tests. That could speed the test up a bit.
This functionality (or something very similar) can however apparently be very
convenient in setups where checking dirty-ness is expensive - such as when
using large files and have slow file filesystems or are CPU constrained. Now it
works and we can try it. (But ideally, for the largefile use case, it should
probably only delay lfdirstate writes - not ordinary dirstate.)
# win32text.py - LF <-> CRLF/CR translation utilities for Windows/Mac users
#
# Copyright 2005, 2007-2009 Matt Mackall <mpm@selenic.com> and others
#
# This software may be used and distributed according to the terms of the
# GNU General Public License version 2 or any later version.
'''perform automatic newline conversion (DEPRECATED)
Deprecation: The win32text extension requires each user to configure
the extension again and again for each clone since the configuration
is not copied when cloning.
We have therefore made the ``eol`` as an alternative. The ``eol``
uses a version controlled file for its configuration and each clone
will therefore use the right settings from the start.
To perform automatic newline conversion, use::
[extensions]
win32text =
[encode]
** = cleverencode:
# or ** = macencode:
[decode]
** = cleverdecode:
# or ** = macdecode:
If not doing conversion, to make sure you do not commit CRLF/CR by accident::
[hooks]
pretxncommit.crlf = python:hgext.win32text.forbidcrlf
# or pretxncommit.cr = python:hgext.win32text.forbidcr
To do the same check on a server to prevent CRLF/CR from being
pushed or pulled::
[hooks]
pretxnchangegroup.crlf = python:hgext.win32text.forbidcrlf
# or pretxnchangegroup.cr = python:hgext.win32text.forbidcr
'''
from __future__ import absolute_import
import re
from mercurial.i18n import _
from mercurial.node import (
short,
)
from mercurial import (
util,
)
# Note for extension authors: ONLY specify testedwith = 'ships-with-hg-core' for
# extensions which SHIP WITH MERCURIAL. Non-mainline extensions should
# be specifying the version(s) of Mercurial they are tested with, or
# leave the attribute unspecified.
testedwith = 'ships-with-hg-core'
# regexp for single LF without CR preceding.
re_single_lf = re.compile('(^|[^\r])\n', re.MULTILINE)
newlinestr = {'\r\n': 'CRLF', '\r': 'CR'}
filterstr = {'\r\n': 'clever', '\r': 'mac'}
def checknewline(s, newline, ui=None, repo=None, filename=None):
# warn if already has 'newline' in repository.
# it might cause unexpected eol conversion.
# see issue 302:
# https://bz.mercurial-scm.org/302
if newline in s and ui and filename and repo:
ui.warn(_('WARNING: %s already has %s line endings\n'
'and does not need EOL conversion by the win32text plugin.\n'
'Before your next commit, please reconsider your '
'encode/decode settings in \nMercurial.ini or %s.\n') %
(filename, newlinestr[newline], repo.join('hgrc')))
def dumbdecode(s, cmd, **kwargs):
checknewline(s, '\r\n', **kwargs)
# replace single LF to CRLF
return re_single_lf.sub('\\1\r\n', s)
def dumbencode(s, cmd):
return s.replace('\r\n', '\n')
def macdumbdecode(s, cmd, **kwargs):
checknewline(s, '\r', **kwargs)
return s.replace('\n', '\r')
def macdumbencode(s, cmd):
return s.replace('\r', '\n')
def cleverdecode(s, cmd, **kwargs):
if not util.binary(s):
return dumbdecode(s, cmd, **kwargs)
return s
def cleverencode(s, cmd):
if not util.binary(s):
return dumbencode(s, cmd)
return s
def macdecode(s, cmd, **kwargs):
if not util.binary(s):
return macdumbdecode(s, cmd, **kwargs)
return s
def macencode(s, cmd):
if not util.binary(s):
return macdumbencode(s, cmd)
return s
_filters = {
'dumbdecode:': dumbdecode,
'dumbencode:': dumbencode,
'cleverdecode:': cleverdecode,
'cleverencode:': cleverencode,
'macdumbdecode:': macdumbdecode,
'macdumbencode:': macdumbencode,
'macdecode:': macdecode,
'macencode:': macencode,
}
def forbidnewline(ui, repo, hooktype, node, newline, **kwargs):
halt = False
seen = set()
# we try to walk changesets in reverse order from newest to
# oldest, so that if we see a file multiple times, we take the
# newest version as canonical. this prevents us from blocking a
# changegroup that contains an unacceptable commit followed later
# by a commit that fixes the problem.
tip = repo['tip']
for rev in xrange(len(repo) - 1, repo[node].rev() - 1, -1):
c = repo[rev]
for f in c.files():
if f in seen or f not in tip or f not in c:
continue
seen.add(f)
data = c[f].data()
if not util.binary(data) and newline in data:
if not halt:
ui.warn(_('attempt to commit or push text file(s) '
'using %s line endings\n') %
newlinestr[newline])
ui.warn(_('in %s: %s\n') % (short(c.node()), f))
halt = True
if halt and hooktype == 'pretxnchangegroup':
crlf = newlinestr[newline].lower()
filter = filterstr[newline]
ui.warn(_('\nTo prevent this mistake in your local repository,\n'
'add to Mercurial.ini or .hg/hgrc:\n'
'\n'
'[hooks]\n'
'pretxncommit.%s = python:hgext.win32text.forbid%s\n'
'\n'
'and also consider adding:\n'
'\n'
'[extensions]\n'
'win32text =\n'
'[encode]\n'
'** = %sencode:\n'
'[decode]\n'
'** = %sdecode:\n') % (crlf, crlf, filter, filter))
return halt
def forbidcrlf(ui, repo, hooktype, node, **kwargs):
return forbidnewline(ui, repo, hooktype, node, '\r\n', **kwargs)
def forbidcr(ui, repo, hooktype, node, **kwargs):
return forbidnewline(ui, repo, hooktype, node, '\r', **kwargs)
def reposetup(ui, repo):
if not repo.local():
return
for name, fn in _filters.iteritems():
repo.adddatafilter(name, fn)
def extsetup(ui):
# deprecated config: win32text.warn
if ui.configbool('win32text', 'warn', True):
ui.warn(_("win32text is deprecated: "
"https://mercurial-scm.org/wiki/Win32TextExtension\n"))