Mercurial > hg
view tests/test-http-permissions.t @ 39772:ae531f5e583c
testing: add interface unit tests for file storage
Our strategy for supporting alternate storage backends is to define
interfaces for everything then "code to the interface."
We already have interfaces for various primitives, including file
and manifest storage.
What we don't have is generic unit tests for those interfaces. Up
to this point we've been relying on high-level integration tests
(mainly in the form of existing .t tests) to test alternate storage
backends. And my experience with developing the "simple store" test
extension is that such testing is very tedious: it takes several
minutes to run all tests and when you find a failure, it is often
non-trivial to debug.
This commit starts to change that.
This commit introduces the mercurial.testing.storage module. It
contains testing code for storage. Currently, it defines some
unittest.TestCase classes for testing the file storage interfaces.
It also defines some factory functions that allow a caller to easily
spawn a custom TestCase "bound" to a specific file storage backend
implementation.
A new .py test has been added. It simply defines a callable to produce
filelog and transaction instances on demand and then "registers" the
various test classes so the filelog class can be tested with the
storage interface unit tests.
As part of writing the tests, I identified a couple of apparent
bugs in revlog.py and filelog.py! These are tracked with inline
TODO comments.
Writing the tests makes it more obvious where the storage interface
is lacking. For example, we raise either IndexError or
error.LookupError for missing revisions depending on whether we
use an integer revision or a node. Also, we raise error.RevlogError
in various places when we should be raising a storage-agnostic
error type.
The storage interfaces are currently far from perfect and there is much
work to be done to improve them. But at least with this commit we
finally have the start of unit tests that can be used to "qualify"
the behavior of a storage backend. And when implementing and debugging
new storage backends, we now have an obvious place to define new
tests and have obvious places to insert breakpoints to facilitate
debugging. This should be invaluable when implementing new storage
backends.
I added the mercurial.testing package because these interface
conformance tests are generic and need to be usable by all storage
backends. Having the code live in tests/ would make it difficult for
storage backends implemented in extensions to test their interface
conformance. First, it would require obtaining a copy of Mercurial's
storage test code in order to test. Second, it would make testing
against multiple Mercurial versions difficult, as you would need to
import N copies of the storage testing code in order to achieve test
coverage. By making the test code part of the Mercurial distribution
itself, extensions can `import mercurial.testing.*` to access and run
the test code. The test will run against whatever Mercurial version
is active.
FWIW I've always wanted to move parts of run-tests.py into the
mercurial.* package to make the testing story simpler (e.g. imagine an
`hg debugruntests` command that could invoke the test harness). While I
have no plans to do that in the near future, establishing the
mercurial.testing package does provide a natural home for that code
should someone do this in the future.
Differential Revision: https://phab.mercurial-scm.org/D4650
author | Gregory Szorc <gregory.szorc@gmail.com> |
---|---|
date | Tue, 18 Sep 2018 16:52:11 -0700 |
parents | c3491d3f8984 |
children | ebee234d952a |
line wrap: on
line source
$ cat > fakeremoteuser.py << EOF > import os > from mercurial.hgweb import hgweb_mod > from mercurial import wireprotov1server > class testenvhgweb(hgweb_mod.hgweb): > def __call__(self, env, respond): > # Allow REMOTE_USER to define authenticated user. > if r'REMOTE_USER' in os.environ: > env[r'REMOTE_USER'] = os.environ[r'REMOTE_USER'] > # Allow REQUEST_METHOD to override HTTP method > if r'REQUEST_METHOD' in os.environ: > env[r'REQUEST_METHOD'] = os.environ[r'REQUEST_METHOD'] > return super(testenvhgweb, self).__call__(env, respond) > hgweb_mod.hgweb = testenvhgweb > > @wireprotov1server.wireprotocommand(b'customreadnoperm') > def customread(repo, proto): > return b'read-only command no defined permissions\n' > @wireprotov1server.wireprotocommand(b'customwritenoperm') > def customwritenoperm(repo, proto): > return b'write command no defined permissions\n' > @wireprotov1server.wireprotocommand(b'customreadwithperm', permission=b'pull') > def customreadwithperm(repo, proto): > return b'read-only command w/ defined permissions\n' > @wireprotov1server.wireprotocommand(b'customwritewithperm', permission=b'push') > def customwritewithperm(repo, proto): > return b'write command w/ defined permissions\n' > EOF $ cat >> $HGRCPATH << EOF > [extensions] > fakeremoteuser = $TESTTMP/fakeremoteuser.py > strip = > EOF $ hg init test $ cd test $ echo a > a $ hg ci -Ama adding a $ cd .. $ hg clone test test2 updating to branch default 1 files updated, 0 files merged, 0 files removed, 0 files unresolved $ cd test2 $ echo a >> a $ hg ci -mb $ hg book bm -r 0 $ cd ../test web.deny_read=* prevents access to wire protocol for all users $ cat > .hg/hgrc <<EOF > [web] > deny_read = * > EOF $ hg serve -p $HGPORT -d --pid-file hg.pid $ cat hg.pid > $DAEMON_PIDS $ get-with-headers.py $LOCALIP:$HGPORT '?cmd=capabilities' 401 read not authorized 0 read not authorized [1] $ get-with-headers.py $LOCALIP:$HGPORT '?cmd=stream_out' 401 read not authorized 0 read not authorized [1] $ get-with-headers.py $LOCALIP:$HGPORT '?cmd=listkeys' --requestheader 'x-hgarg-1=namespace=phases' 401 read not authorized 0 read not authorized [1] $ get-with-headers.py $LOCALIP:$HGPORT '?cmd=batch' --requestheader 'x-hgarg-1=cmds=listkeys+namespace%3Dphases' 401 read not authorized 0 read not authorized [1] $ get-with-headers.py $LOCALIP:$HGPORT '?cmd=customreadnoperm' 401 read not authorized 0 read not authorized [1] $ get-with-headers.py $LOCALIP:$HGPORT '?cmd=customreadwithperm' 401 read not authorized 0 read not authorized [1] $ get-with-headers.py $LOCALIP:$HGPORT '?cmd=customwritenoperm' 401 read not authorized 0 read not authorized [1] $ get-with-headers.py $LOCALIP:$HGPORT '?cmd=customwritewithperm' 401 read not authorized 0 read not authorized [1] $ hg --cwd ../test2 pull http://localhost:$HGPORT/ pulling from http://localhost:$HGPORT/ abort: authorization failed [255] $ killdaemons.py web.deny_read=* with REMOTE_USER set still locks out clients $ REMOTE_USER=authed_user hg serve -p $HGPORT -d --pid-file hg.pid $ cat hg.pid > $DAEMON_PIDS $ get-with-headers.py $LOCALIP:$HGPORT '?cmd=capabilities' 401 read not authorized 0 read not authorized [1] $ get-with-headers.py $LOCALIP:$HGPORT '?cmd=stream_out' 401 read not authorized 0 read not authorized [1] $ get-with-headers.py $LOCALIP:$HGPORT '?cmd=batch' --requestheader 'x-hgarg-1=cmds=listkeys+namespace%3Dphases' 401 read not authorized 0 read not authorized [1] $ get-with-headers.py $LOCALIP:$HGPORT '?cmd=customreadnoperm' 401 read not authorized 0 read not authorized [1] $ get-with-headers.py $LOCALIP:$HGPORT '?cmd=customreadwithperm' 401 read not authorized 0 read not authorized [1] $ get-with-headers.py $LOCALIP:$HGPORT '?cmd=customwritenoperm' 401 read not authorized 0 read not authorized [1] $ get-with-headers.py $LOCALIP:$HGPORT '?cmd=customwritewithperm' 401 read not authorized 0 read not authorized [1] $ hg --cwd ../test2 pull http://localhost:$HGPORT/ pulling from http://localhost:$HGPORT/ abort: authorization failed [255] $ killdaemons.py web.deny_read=<user> denies access to unauthenticated user $ cat > .hg/hgrc <<EOF > [web] > deny_read = baduser1,baduser2 > EOF $ hg serve -p $HGPORT -d --pid-file hg.pid $ cat hg.pid > $DAEMON_PIDS $ get-with-headers.py $LOCALIP:$HGPORT '?cmd=listkeys' --requestheader 'x-hgarg-1=namespace=phases' 401 read not authorized 0 read not authorized [1] $ get-with-headers.py $LOCALIP:$HGPORT '?cmd=batch' --requestheader 'x-hgarg-1=cmds=listkeys+namespace%3Dphases' 401 read not authorized 0 read not authorized [1] $ get-with-headers.py $LOCALIP:$HGPORT '?cmd=customreadnoperm' 401 read not authorized 0 read not authorized [1] $ get-with-headers.py $LOCALIP:$HGPORT '?cmd=customreadwithperm' 401 read not authorized 0 read not authorized [1] $ get-with-headers.py $LOCALIP:$HGPORT '?cmd=customwritenoperm' 401 read not authorized 0 read not authorized [1] $ get-with-headers.py $LOCALIP:$HGPORT '?cmd=customwritewithperm' 401 read not authorized 0 read not authorized [1] $ hg --cwd ../test2 pull http://localhost:$HGPORT/ pulling from http://localhost:$HGPORT/ abort: authorization failed [255] $ killdaemons.py web.deny_read=<user> denies access to users in deny list $ REMOTE_USER=baduser2 hg serve -p $HGPORT -d --pid-file hg.pid $ cat hg.pid > $DAEMON_PIDS $ get-with-headers.py $LOCALIP:$HGPORT '?cmd=listkeys' --requestheader 'x-hgarg-1=namespace=phases' 401 read not authorized 0 read not authorized [1] $ get-with-headers.py $LOCALIP:$HGPORT '?cmd=batch' --requestheader 'x-hgarg-1=cmds=listkeys+namespace%3Dphases' 401 read not authorized 0 read not authorized [1] $ get-with-headers.py $LOCALIP:$HGPORT '?cmd=customreadnoperm' 401 read not authorized 0 read not authorized [1] $ get-with-headers.py $LOCALIP:$HGPORT '?cmd=customreadwithperm' 401 read not authorized 0 read not authorized [1] $ get-with-headers.py $LOCALIP:$HGPORT '?cmd=customwritenoperm' 401 read not authorized 0 read not authorized [1] $ get-with-headers.py $LOCALIP:$HGPORT '?cmd=customwritewithperm' 401 read not authorized 0 read not authorized [1] $ hg --cwd ../test2 pull http://localhost:$HGPORT/ pulling from http://localhost:$HGPORT/ abort: authorization failed [255] $ killdaemons.py web.deny_read=<user> allows access to authenticated users not in list $ REMOTE_USER=gooduser hg serve -p $HGPORT -d --pid-file hg.pid $ cat hg.pid > $DAEMON_PIDS $ get-with-headers.py $LOCALIP:$HGPORT '?cmd=listkeys' --requestheader 'x-hgarg-1=namespace=phases' 200 Script output follows cb9a9f314b8b07ba71012fcdbc544b5a4d82ff5b 1 publishing True (no-eol) $ get-with-headers.py $LOCALIP:$HGPORT '?cmd=batch' --requestheader 'x-hgarg-1=cmds=listkeys+namespace%3Dphases' 200 Script output follows cb9a9f314b8b07ba71012fcdbc544b5a4d82ff5b 1 publishing True (no-eol) $ get-with-headers.py $LOCALIP:$HGPORT '?cmd=customreadnoperm' 405 push requires POST request 0 push requires POST request [1] $ get-with-headers.py $LOCALIP:$HGPORT '?cmd=customreadwithperm' 200 Script output follows read-only command w/ defined permissions $ get-with-headers.py $LOCALIP:$HGPORT '?cmd=customwritenoperm' 405 push requires POST request 0 push requires POST request [1] $ get-with-headers.py $LOCALIP:$HGPORT '?cmd=customwritewithperm' 405 push requires POST request 0 push requires POST request [1] $ hg --cwd ../test2 pull http://localhost:$HGPORT/ pulling from http://localhost:$HGPORT/ searching for changes no changes found $ killdaemons.py web.allow_read=* allows reads for unauthenticated users $ cat > .hg/hgrc <<EOF > [web] > allow_read = * > EOF $ hg serve -p $HGPORT -d --pid-file hg.pid $ cat hg.pid > $DAEMON_PIDS $ get-with-headers.py $LOCALIP:$HGPORT '?cmd=listkeys' --requestheader 'x-hgarg-1=namespace=phases' 200 Script output follows cb9a9f314b8b07ba71012fcdbc544b5a4d82ff5b 1 publishing True (no-eol) $ get-with-headers.py $LOCALIP:$HGPORT '?cmd=batch' --requestheader 'x-hgarg-1=cmds=listkeys+namespace%3Dphases' 200 Script output follows cb9a9f314b8b07ba71012fcdbc544b5a4d82ff5b 1 publishing True (no-eol) $ get-with-headers.py $LOCALIP:$HGPORT '?cmd=customreadnoperm' 405 push requires POST request 0 push requires POST request [1] $ get-with-headers.py $LOCALIP:$HGPORT '?cmd=customreadwithperm' 200 Script output follows read-only command w/ defined permissions $ get-with-headers.py $LOCALIP:$HGPORT '?cmd=customwritenoperm' 405 push requires POST request 0 push requires POST request [1] $ get-with-headers.py $LOCALIP:$HGPORT '?cmd=customwritewithperm' 405 push requires POST request 0 push requires POST request [1] $ hg --cwd ../test2 pull http://localhost:$HGPORT/ pulling from http://localhost:$HGPORT/ searching for changes no changes found $ killdaemons.py web.allow_read=* allows read for authenticated user $ REMOTE_USER=authed_user hg serve -p $HGPORT -d --pid-file hg.pid $ cat hg.pid > $DAEMON_PIDS $ get-with-headers.py $LOCALIP:$HGPORT '?cmd=listkeys' --requestheader 'x-hgarg-1=namespace=phases' 200 Script output follows cb9a9f314b8b07ba71012fcdbc544b5a4d82ff5b 1 publishing True (no-eol) $ get-with-headers.py $LOCALIP:$HGPORT '?cmd=batch' --requestheader 'x-hgarg-1=cmds=listkeys+namespace%3Dphases' 200 Script output follows cb9a9f314b8b07ba71012fcdbc544b5a4d82ff5b 1 publishing True (no-eol) $ get-with-headers.py $LOCALIP:$HGPORT '?cmd=customreadnoperm' 405 push requires POST request 0 push requires POST request [1] $ get-with-headers.py $LOCALIP:$HGPORT '?cmd=customreadwithperm' 200 Script output follows read-only command w/ defined permissions $ get-with-headers.py $LOCALIP:$HGPORT '?cmd=customwritenoperm' 405 push requires POST request 0 push requires POST request [1] $ get-with-headers.py $LOCALIP:$HGPORT '?cmd=customwritewithperm' 405 push requires POST request 0 push requires POST request [1] $ hg --cwd ../test2 pull http://localhost:$HGPORT/ pulling from http://localhost:$HGPORT/ searching for changes no changes found $ killdaemons.py web.allow_read=<user> does not allow unauthenticated users to read $ cat > .hg/hgrc <<EOF > [web] > allow_read = gooduser > EOF $ hg serve -p $HGPORT -d --pid-file hg.pid $ cat hg.pid > $DAEMON_PIDS $ get-with-headers.py $LOCALIP:$HGPORT '?cmd=listkeys' --requestheader 'x-hgarg-1=namespace=phases' 401 read not authorized 0 read not authorized [1] $ get-with-headers.py $LOCALIP:$HGPORT '?cmd=batch' --requestheader 'x-hgarg-1=cmds=listkeys+namespace%3Dphases' 401 read not authorized 0 read not authorized [1] $ get-with-headers.py $LOCALIP:$HGPORT '?cmd=customreadnoperm' 401 read not authorized 0 read not authorized [1] $ get-with-headers.py $LOCALIP:$HGPORT '?cmd=customreadwithperm' 401 read not authorized 0 read not authorized [1] $ get-with-headers.py $LOCALIP:$HGPORT '?cmd=customwritenoperm' 401 read not authorized 0 read not authorized [1] $ get-with-headers.py $LOCALIP:$HGPORT '?cmd=customwritewithperm' 401 read not authorized 0 read not authorized [1] $ hg --cwd ../test2 pull http://localhost:$HGPORT/ pulling from http://localhost:$HGPORT/ abort: authorization failed [255] $ killdaemons.py web.allow_read=<user> does not allow user not in list to read $ REMOTE_USER=baduser hg serve -p $HGPORT -d --pid-file hg.pid $ cat hg.pid > $DAEMON_PIDS $ get-with-headers.py $LOCALIP:$HGPORT '?cmd=listkeys' --requestheader 'x-hgarg-1=namespace=phases' 401 read not authorized 0 read not authorized [1] $ get-with-headers.py $LOCALIP:$HGPORT '?cmd=batch' --requestheader 'x-hgarg-1=cmds=listkeys+namespace%3Dphases' 401 read not authorized 0 read not authorized [1] $ get-with-headers.py $LOCALIP:$HGPORT '?cmd=customreadnoperm' 401 read not authorized 0 read not authorized [1] $ get-with-headers.py $LOCALIP:$HGPORT '?cmd=customreadwithperm' 401 read not authorized 0 read not authorized [1] $ get-with-headers.py $LOCALIP:$HGPORT '?cmd=customwritenoperm' 401 read not authorized 0 read not authorized [1] $ get-with-headers.py $LOCALIP:$HGPORT '?cmd=customwritewithperm' 401 read not authorized 0 read not authorized [1] $ hg --cwd ../test2 pull http://localhost:$HGPORT/ pulling from http://localhost:$HGPORT/ abort: authorization failed [255] $ killdaemons.py web.allow_read=<user> allows read from user in list $ REMOTE_USER=gooduser hg serve -p $HGPORT -d --pid-file hg.pid $ cat hg.pid > $DAEMON_PIDS $ get-with-headers.py $LOCALIP:$HGPORT '?cmd=listkeys' --requestheader 'x-hgarg-1=namespace=phases' 200 Script output follows cb9a9f314b8b07ba71012fcdbc544b5a4d82ff5b 1 publishing True (no-eol) $ get-with-headers.py $LOCALIP:$HGPORT '?cmd=batch' --requestheader 'x-hgarg-1=cmds=listkeys+namespace%3Dphases' 200 Script output follows cb9a9f314b8b07ba71012fcdbc544b5a4d82ff5b 1 publishing True (no-eol) $ get-with-headers.py $LOCALIP:$HGPORT '?cmd=customreadnoperm' 405 push requires POST request 0 push requires POST request [1] $ get-with-headers.py $LOCALIP:$HGPORT '?cmd=customreadwithperm' 200 Script output follows read-only command w/ defined permissions $ get-with-headers.py $LOCALIP:$HGPORT '?cmd=customwritenoperm' 405 push requires POST request 0 push requires POST request [1] $ get-with-headers.py $LOCALIP:$HGPORT '?cmd=customwritewithperm' 405 push requires POST request 0 push requires POST request [1] $ hg --cwd ../test2 pull http://localhost:$HGPORT/ pulling from http://localhost:$HGPORT/ searching for changes no changes found $ killdaemons.py web.deny_read takes precedence over web.allow_read $ cat > .hg/hgrc <<EOF > [web] > allow_read = baduser > deny_read = baduser > EOF $ REMOTE_USER=baduser hg serve -p $HGPORT -d --pid-file hg.pid $ cat hg.pid > $DAEMON_PIDS $ get-with-headers.py $LOCALIP:$HGPORT '?cmd=listkeys' --requestheader 'x-hgarg-1=namespace=phases' 401 read not authorized 0 read not authorized [1] $ get-with-headers.py $LOCALIP:$HGPORT '?cmd=batch' --requestheader 'x-hgarg-1=cmds=listkeys+namespace%3Dphases' 401 read not authorized 0 read not authorized [1] $ get-with-headers.py $LOCALIP:$HGPORT '?cmd=customreadnoperm' 401 read not authorized 0 read not authorized [1] $ get-with-headers.py $LOCALIP:$HGPORT '?cmd=customreadwithperm' 401 read not authorized 0 read not authorized [1] $ get-with-headers.py $LOCALIP:$HGPORT '?cmd=customwritenoperm' 401 read not authorized 0 read not authorized [1] $ get-with-headers.py $LOCALIP:$HGPORT '?cmd=customwritewithperm' 401 read not authorized 0 read not authorized [1] $ hg --cwd ../test2 pull http://localhost:$HGPORT/ pulling from http://localhost:$HGPORT/ abort: authorization failed [255] $ killdaemons.py web.allow-pull=false denies read access to repo $ cat > .hg/hgrc <<EOF > [web] > allow-pull = false > EOF $ hg serve -p $HGPORT -d --pid-file hg.pid $ cat hg.pid > $DAEMON_PIDS $ get-with-headers.py $LOCALIP:$HGPORT '?cmd=capabilities' 401 pull not authorized 0 pull not authorized [1] $ get-with-headers.py $LOCALIP:$HGPORT '?cmd=listkeys' --requestheader 'x-hgarg-1=namespace=phases' 401 pull not authorized 0 pull not authorized [1] $ get-with-headers.py $LOCALIP:$HGPORT '?cmd=batch' --requestheader 'x-hgarg-1=cmds=listkeys+namespace%3Dphases' 401 pull not authorized 0 pull not authorized [1] $ get-with-headers.py $LOCALIP:$HGPORT '?cmd=customreadnoperm' 405 push requires POST request 0 push requires POST request [1] $ get-with-headers.py $LOCALIP:$HGPORT '?cmd=customreadwithperm' 401 pull not authorized 0 pull not authorized [1] $ get-with-headers.py $LOCALIP:$HGPORT '?cmd=customwritenoperm' 405 push requires POST request 0 push requires POST request [1] $ get-with-headers.py $LOCALIP:$HGPORT '?cmd=customwritewithperm' 405 push requires POST request 0 push requires POST request [1] $ hg --cwd ../test2 pull http://localhost:$HGPORT/ pulling from http://localhost:$HGPORT/ abort: authorization failed [255] $ killdaemons.py Attempting a write command with HTTP GET fails $ cat > .hg/hgrc <<EOF > EOF $ REQUEST_METHOD=GET hg serve -p $HGPORT -d --pid-file hg.pid $ cat hg.pid > $DAEMON_PIDS $ get-with-headers.py $LOCALIP:$HGPORT '?cmd=pushkey' --requestheader 'x-hgarg-1=namespace=bookmarks&key=bm&old=&new=cb9a9f314b8b07ba71012fcdbc544b5a4d82ff5b' 405 push requires POST request 0 push requires POST request [1] $ get-with-headers.py $LOCALIP:$HGPORT '?cmd=batch' --requestheader 'x-hgarg-1=cmds=pushkey+namespace%3Dbookmarks%2Ckey%3Dbm%2Cold%3D%2Cnew%3Dcb9a9f314b8b07ba71012fcdbc544b5a4d82ff5b' 405 push requires POST request 0 push requires POST request [1] $ hg bookmarks no bookmarks set $ hg bookmark -d bm abort: bookmark 'bm' does not exist [255] $ get-with-headers.py $LOCALIP:$HGPORT '?cmd=customwritenoperm' 405 push requires POST request 0 push requires POST request [1] $ get-with-headers.py $LOCALIP:$HGPORT '?cmd=customwritewithperm' 405 push requires POST request 0 push requires POST request [1] $ killdaemons.py Attempting a write command with an unknown HTTP verb fails $ REQUEST_METHOD=someverb hg serve -p $HGPORT -d --pid-file hg.pid $ cat hg.pid > $DAEMON_PIDS $ get-with-headers.py $LOCALIP:$HGPORT '?cmd=pushkey' --requestheader 'x-hgarg-1=namespace=bookmarks&key=bm&old=&new=cb9a9f314b8b07ba71012fcdbc544b5a4d82ff5b' 405 push requires POST request 0 push requires POST request [1] $ get-with-headers.py $LOCALIP:$HGPORT '?cmd=batch' --requestheader 'x-hgarg-1=cmds=pushkey+namespace%3Dbookmarks%2Ckey%3Dbm%2Cold%3D%2Cnew%3Dcb9a9f314b8b07ba71012fcdbc544b5a4d82ff5b' 405 push requires POST request 0 push requires POST request [1] $ hg bookmarks no bookmarks set $ hg bookmark -d bm abort: bookmark 'bm' does not exist [255] $ get-with-headers.py $LOCALIP:$HGPORT '?cmd=customwritenoperm' 405 push requires POST request 0 push requires POST request [1] $ get-with-headers.py $LOCALIP:$HGPORT '?cmd=customwritewithperm' 405 push requires POST request 0 push requires POST request [1] $ killdaemons.py Pushing on a plaintext channel is disabled by default $ cat > .hg/hgrc <<EOF > EOF $ REQUEST_METHOD=POST hg serve -p $HGPORT -d --pid-file hg.pid $ cat hg.pid > $DAEMON_PIDS $ get-with-headers.py $LOCALIP:$HGPORT '?cmd=pushkey' --requestheader 'x-hgarg-1=namespace=bookmarks&key=bm&old=&new=cb9a9f314b8b07ba71012fcdbc544b5a4d82ff5b' 403 ssl required 0 ssl required [1] $ get-with-headers.py $LOCALIP:$HGPORT '?cmd=batch' --requestheader 'x-hgarg-1=cmds=pushkey+namespace%3Dbookmarks%2Ckey%3Dbm%2Cold%3D%2Cnew%3Dcb9a9f314b8b07ba71012fcdbc544b5a4d82ff5b' 403 ssl required 0 ssl required [1] $ hg bookmarks no bookmarks set $ get-with-headers.py $LOCALIP:$HGPORT '?cmd=customwritenoperm' 403 ssl required 0 ssl required [1] $ get-with-headers.py $LOCALIP:$HGPORT '?cmd=customwritewithperm' 403 ssl required 0 ssl required [1] Reset server to remove REQUEST_METHOD hack to test hg client $ killdaemons.py $ hg serve -p $HGPORT -d --pid-file hg.pid $ cat hg.pid > $DAEMON_PIDS $ hg --cwd ../test2 push -B bm http://localhost:$HGPORT/ pushing to http://localhost:$HGPORT/ searching for changes no changes found abort: HTTP Error 403: ssl required [255] $ hg --cwd ../test2 push http://localhost:$HGPORT/ pushing to http://localhost:$HGPORT/ searching for changes abort: HTTP Error 403: ssl required [255] $ killdaemons.py web.deny_push=* denies pushing to unauthenticated users $ cat > .hg/hgrc <<EOF > [web] > push_ssl = false > deny_push = * > EOF $ REQUEST_METHOD=POST hg serve -p $HGPORT -d --pid-file hg.pid $ cat hg.pid > $DAEMON_PIDS $ get-with-headers.py $LOCALIP:$HGPORT '?cmd=pushkey' --requestheader 'x-hgarg-1=namespace=bookmarks&key=bm&old=&new=cb9a9f314b8b07ba71012fcdbc544b5a4d82ff5b' 401 push not authorized 0 push not authorized [1] $ get-with-headers.py $LOCALIP:$HGPORT '?cmd=batch' --requestheader 'x-hgarg-1=cmds=pushkey+namespace%3Dbookmarks%2Ckey%3Dbm%2Cold%3D%2Cnew%3Dcb9a9f314b8b07ba71012fcdbc544b5a4d82ff5b' 401 push not authorized 0 push not authorized [1] $ hg bookmarks no bookmarks set $ get-with-headers.py $LOCALIP:$HGPORT '?cmd=customwritenoperm' 401 push not authorized 0 push not authorized [1] $ get-with-headers.py $LOCALIP:$HGPORT '?cmd=customwritewithperm' 401 push not authorized 0 push not authorized [1] Reset server to remove REQUEST_METHOD hack to test hg client $ killdaemons.py $ hg serve -p $HGPORT -d --pid-file hg.pid $ cat hg.pid > $DAEMON_PIDS $ hg --cwd ../test2 push -B bm http://localhost:$HGPORT/ pushing to http://localhost:$HGPORT/ searching for changes no changes found abort: authorization failed [255] $ hg --cwd ../test2 push http://localhost:$HGPORT/ pushing to http://localhost:$HGPORT/ searching for changes abort: authorization failed [255] $ killdaemons.py web.deny_push=* denies pushing to authenticated users $ REMOTE_USER=someuser REQUEST_METHOD=POST hg serve -p $HGPORT -d --pid-file hg.pid $ cat hg.pid > $DAEMON_PIDS $ get-with-headers.py $LOCALIP:$HGPORT '?cmd=pushkey' --requestheader 'x-hgarg-1=namespace=bookmarks&key=bm&old=&new=cb9a9f314b8b07ba71012fcdbc544b5a4d82ff5b' 401 push not authorized 0 push not authorized [1] $ get-with-headers.py $LOCALIP:$HGPORT '?cmd=batch' --requestheader 'x-hgarg-1=cmds=pushkey+namespace%3Dbookmarks%2Ckey%3Dbm%2Cold%3D%2Cnew%3Dcb9a9f314b8b07ba71012fcdbc544b5a4d82ff5b' 401 push not authorized 0 push not authorized [1] $ hg bookmarks no bookmarks set $ get-with-headers.py $LOCALIP:$HGPORT '?cmd=customwritenoperm' 401 push not authorized 0 push not authorized [1] $ get-with-headers.py $LOCALIP:$HGPORT '?cmd=customwritewithperm' 401 push not authorized 0 push not authorized [1] Reset server to remove REQUEST_METHOD hack to test hg client $ killdaemons.py $ REMOTE_USER=someuser hg serve -p $HGPORT -d --pid-file hg.pid $ cat hg.pid > $DAEMON_PIDS $ hg --cwd ../test2 push -B bm http://localhost:$HGPORT/ pushing to http://localhost:$HGPORT/ searching for changes no changes found abort: authorization failed [255] $ hg --cwd ../test2 push http://localhost:$HGPORT/ pushing to http://localhost:$HGPORT/ searching for changes abort: authorization failed [255] $ killdaemons.py web.deny_push=<user> denies pushing to user in list $ cat > .hg/hgrc <<EOF > [web] > push_ssl = false > deny_push = baduser > EOF $ REMOTE_USER=baduser REQUEST_METHOD=POST hg serve -p $HGPORT -d --pid-file hg.pid $ cat hg.pid > $DAEMON_PIDS $ get-with-headers.py $LOCALIP:$HGPORT '?cmd=pushkey' --requestheader 'x-hgarg-1=namespace=bookmarks&key=bm&old=&new=cb9a9f314b8b07ba71012fcdbc544b5a4d82ff5b' 401 push not authorized 0 push not authorized [1] $ get-with-headers.py $LOCALIP:$HGPORT '?cmd=batch' --requestheader 'x-hgarg-1=cmds=pushkey+namespace%3Dbookmarks%2Ckey%3Dbm%2Cold%3D%2Cnew%3Dcb9a9f314b8b07ba71012fcdbc544b5a4d82ff5b' 401 push not authorized 0 push not authorized [1] $ hg bookmarks no bookmarks set $ get-with-headers.py $LOCALIP:$HGPORT '?cmd=customwritenoperm' 401 push not authorized 0 push not authorized [1] $ get-with-headers.py $LOCALIP:$HGPORT '?cmd=customwritewithperm' 401 push not authorized 0 push not authorized [1] Reset server to remove REQUEST_METHOD hack to test hg client $ killdaemons.py $ REMOTE_USER=baduser hg serve -p $HGPORT -d --pid-file hg.pid $ cat hg.pid > $DAEMON_PIDS $ hg --cwd ../test2 push -B bm http://localhost:$HGPORT/ pushing to http://localhost:$HGPORT/ searching for changes no changes found abort: authorization failed [255] $ hg --cwd ../test2 push http://localhost:$HGPORT/ pushing to http://localhost:$HGPORT/ searching for changes abort: authorization failed [255] $ killdaemons.py web.deny_push=<user> denies pushing to user not in list because allow-push isn't set $ REMOTE_USER=gooduser REQUEST_METHOD=POST hg serve -p $HGPORT -d --pid-file hg.pid $ cat hg.pid > $DAEMON_PIDS $ get-with-headers.py $LOCALIP:$HGPORT '?cmd=pushkey' --requestheader 'x-hgarg-1=namespace=bookmarks&key=bm&old=&new=cb9a9f314b8b07ba71012fcdbc544b5a4d82ff5b' 401 push not authorized 0 push not authorized [1] $ get-with-headers.py $LOCALIP:$HGPORT '?cmd=batch' --requestheader 'x-hgarg-1=cmds=pushkey+namespace%3Dbookmarks%2Ckey%3Dbm%2Cold%3D%2Cnew%3Dcb9a9f314b8b07ba71012fcdbc544b5a4d82ff5b' 401 push not authorized 0 push not authorized [1] $ hg bookmarks no bookmarks set $ get-with-headers.py $LOCALIP:$HGPORT '?cmd=customwritenoperm' 401 push not authorized 0 push not authorized [1] $ get-with-headers.py $LOCALIP:$HGPORT '?cmd=customwritewithperm' 401 push not authorized 0 push not authorized [1] Reset server to remove REQUEST_METHOD hack to test hg client $ killdaemons.py $ REMOTE_USER=gooduser hg serve -p $HGPORT -d --pid-file hg.pid $ cat hg.pid > $DAEMON_PIDS $ hg --cwd ../test2 push -B bm http://localhost:$HGPORT/ pushing to http://localhost:$HGPORT/ searching for changes no changes found abort: authorization failed [255] $ hg --cwd ../test2 push http://localhost:$HGPORT/ pushing to http://localhost:$HGPORT/ searching for changes abort: authorization failed [255] $ killdaemons.py web.allow-push=* allows pushes from unauthenticated users $ cat > .hg/hgrc <<EOF > [web] > push_ssl = false > allow-push = * > EOF $ REQUEST_METHOD=POST hg serve -p $HGPORT -d --pid-file hg.pid $ cat hg.pid > $DAEMON_PIDS $ get-with-headers.py $LOCALIP:$HGPORT '?cmd=pushkey' --requestheader 'x-hgarg-1=namespace=bookmarks&key=bm&old=&new=cb9a9f314b8b07ba71012fcdbc544b5a4d82ff5b' 200 Script output follows 1 $ hg bookmarks bm 0:cb9a9f314b8b $ hg book -d bm $ get-with-headers.py $LOCALIP:$HGPORT '?cmd=customwritenoperm' 200 Script output follows write command no defined permissions $ get-with-headers.py $LOCALIP:$HGPORT '?cmd=customwritewithperm' 200 Script output follows write command w/ defined permissions Reset server to remove REQUEST_METHOD hack to test hg client $ killdaemons.py $ hg serve -p $HGPORT -d --pid-file hg.pid $ cat hg.pid > $DAEMON_PIDS $ hg --cwd ../test2 push -B bm http://localhost:$HGPORT/ pushing to http://localhost:$HGPORT/ searching for changes no changes found exporting bookmark bm [1] $ hg book -d bm $ hg --cwd ../test2 push http://localhost:$HGPORT/ pushing to http://localhost:$HGPORT/ searching for changes remote: adding changesets remote: adding manifests remote: adding file changes remote: added 1 changesets with 1 changes to 1 files $ hg strip -r 1: saved backup bundle to $TESTTMP/test/.hg/strip-backup/ba677d0156c1-eea704d7-backup.hg $ killdaemons.py web.allow-push=* allows pushes from authenticated users $ REMOTE_USER=someuser REQUEST_METHOD=POST hg serve -p $HGPORT -d --pid-file hg.pid $ cat hg.pid > $DAEMON_PIDS $ get-with-headers.py $LOCALIP:$HGPORT '?cmd=pushkey' --requestheader 'x-hgarg-1=namespace=bookmarks&key=bm&old=&new=cb9a9f314b8b07ba71012fcdbc544b5a4d82ff5b' 200 Script output follows 1 $ hg bookmarks bm 0:cb9a9f314b8b $ hg book -d bm $ get-with-headers.py $LOCALIP:$HGPORT '?cmd=customwritenoperm' 200 Script output follows write command no defined permissions $ get-with-headers.py $LOCALIP:$HGPORT '?cmd=customwritewithperm' 200 Script output follows write command w/ defined permissions Reset server to remove REQUEST_METHOD hack to test hg client $ killdaemons.py $ REMOTE_USER=someuser hg serve -p $HGPORT -d --pid-file hg.pid $ cat hg.pid > $DAEMON_PIDS $ hg --cwd ../test2 push -B bm http://localhost:$HGPORT/ pushing to http://localhost:$HGPORT/ searching for changes no changes found exporting bookmark bm [1] $ hg book -d bm $ hg --cwd ../test2 push http://localhost:$HGPORT/ pushing to http://localhost:$HGPORT/ searching for changes remote: adding changesets remote: adding manifests remote: adding file changes remote: added 1 changesets with 1 changes to 1 files $ hg strip -r 1: saved backup bundle to $TESTTMP/test/.hg/strip-backup/ba677d0156c1-eea704d7-backup.hg $ killdaemons.py web.allow-push=<user> denies push to user not in list $ cat > .hg/hgrc <<EOF > [web] > push_ssl = false > allow-push = gooduser > EOF $ REMOTE_USER=baduser REQUEST_METHOD=POST hg serve -p $HGPORT -d --pid-file hg.pid $ cat hg.pid > $DAEMON_PIDS $ get-with-headers.py $LOCALIP:$HGPORT '?cmd=pushkey' --requestheader 'x-hgarg-1=namespace=bookmarks&key=bm&old=&new=cb9a9f314b8b07ba71012fcdbc544b5a4d82ff5b' 401 push not authorized 0 push not authorized [1] $ get-with-headers.py $LOCALIP:$HGPORT '?cmd=batch' --requestheader 'x-hgarg-1=cmds=pushkey+namespace%3Dbookmarks%2Ckey%3Dbm%2Cold%3D%2Cnew%3Dcb9a9f314b8b07ba71012fcdbc544b5a4d82ff5b' 401 push not authorized 0 push not authorized [1] $ hg bookmarks no bookmarks set $ get-with-headers.py $LOCALIP:$HGPORT '?cmd=customwritenoperm' 401 push not authorized 0 push not authorized [1] $ get-with-headers.py $LOCALIP:$HGPORT '?cmd=customwritewithperm' 401 push not authorized 0 push not authorized [1] Reset server to remove REQUEST_METHOD hack to test hg client $ killdaemons.py $ REMOTE_USER=baduser hg serve -p $HGPORT -d --pid-file hg.pid $ cat hg.pid > $DAEMON_PIDS $ hg --cwd ../test2 push -B bm http://localhost:$HGPORT/ pushing to http://localhost:$HGPORT/ searching for changes no changes found abort: authorization failed [255] $ hg --cwd ../test2 push http://localhost:$HGPORT/ pushing to http://localhost:$HGPORT/ searching for changes abort: authorization failed [255] $ killdaemons.py web.allow-push=<user> allows push from user in list $ REMOTE_USER=gooduser REQUEST_METHOD=POST hg serve -p $HGPORT -d --pid-file hg.pid $ cat hg.pid > $DAEMON_PIDS $ get-with-headers.py $LOCALIP:$HGPORT '?cmd=pushkey' --requestheader 'x-hgarg-1=namespace=bookmarks&key=bm&old=&new=cb9a9f314b8b07ba71012fcdbc544b5a4d82ff5b' 200 Script output follows 1 $ hg bookmarks bm 0:cb9a9f314b8b $ hg book -d bm $ get-with-headers.py $LOCALIP:$HGPORT '?cmd=batch' --requestheader 'x-hgarg-1=cmds=pushkey+namespace%3Dbookmarks%2Ckey%3Dbm%2Cold%3D%2Cnew%3Dcb9a9f314b8b07ba71012fcdbc544b5a4d82ff5b' 200 Script output follows 1 $ hg bookmarks bm 0:cb9a9f314b8b $ hg book -d bm $ get-with-headers.py $LOCALIP:$HGPORT '?cmd=customwritenoperm' 200 Script output follows write command no defined permissions $ get-with-headers.py $LOCALIP:$HGPORT '?cmd=customwritewithperm' 200 Script output follows write command w/ defined permissions Reset server to remove REQUEST_METHOD hack to test hg client $ killdaemons.py $ REMOTE_USER=gooduser hg serve -p $HGPORT -d --pid-file hg.pid $ cat hg.pid > $DAEMON_PIDS $ hg --cwd ../test2 push -B bm http://localhost:$HGPORT/ pushing to http://localhost:$HGPORT/ searching for changes no changes found exporting bookmark bm [1] $ hg book -d bm $ hg --cwd ../test2 push http://localhost:$HGPORT/ pushing to http://localhost:$HGPORT/ searching for changes remote: adding changesets remote: adding manifests remote: adding file changes remote: added 1 changesets with 1 changes to 1 files $ hg strip -r 1: saved backup bundle to $TESTTMP/test/.hg/strip-backup/ba677d0156c1-eea704d7-backup.hg $ killdaemons.py web.deny_push takes precedence over web.allow_push $ cat > .hg/hgrc <<EOF > [web] > push_ssl = false > allow-push = someuser > deny_push = someuser > EOF $ REMOTE_USER=someuser REQUEST_METHOD=POST hg serve -p $HGPORT -d --pid-file hg.pid $ cat hg.pid > $DAEMON_PIDS $ get-with-headers.py $LOCALIP:$HGPORT '?cmd=pushkey' --requestheader 'x-hgarg-1=namespace=bookmarks&key=bm&old=&new=cb9a9f314b8b07ba71012fcdbc544b5a4d82ff5b' 401 push not authorized 0 push not authorized [1] $ get-with-headers.py $LOCALIP:$HGPORT '?cmd=batch' --requestheader 'x-hgarg-1=cmds=pushkey+namespace%3Dbookmarks%2Ckey%3Dbm%2Cold%3D%2Cnew%3Dcb9a9f314b8b07ba71012fcdbc544b5a4d82ff5b' 401 push not authorized 0 push not authorized [1] $ hg bookmarks no bookmarks set $ get-with-headers.py $LOCALIP:$HGPORT '?cmd=customwritenoperm' 401 push not authorized 0 push not authorized [1] $ get-with-headers.py $LOCALIP:$HGPORT '?cmd=customwritewithperm' 401 push not authorized 0 push not authorized [1] Reset server to remove REQUEST_METHOD hack to test hg client $ killdaemons.py $ REMOTE_USER=someuser hg serve -p $HGPORT -d --pid-file hg.pid $ cat hg.pid > $DAEMON_PIDS $ hg --cwd ../test2 push -B bm http://localhost:$HGPORT/ pushing to http://localhost:$HGPORT/ searching for changes no changes found abort: authorization failed [255] $ hg --cwd ../test2 push http://localhost:$HGPORT/ pushing to http://localhost:$HGPORT/ searching for changes abort: authorization failed [255] $ killdaemons.py web.allow-push has no effect if web.deny_read is set $ cat > .hg/hgrc <<EOF > [web] > push_ssl = false > allow-push = * > deny_read = * > EOF $ REQUEST_METHOD=POST REMOTE_USER=someuser hg serve -p $HGPORT -d --pid-file hg.pid $ cat hg.pid > $DAEMON_PIDS $ get-with-headers.py $LOCALIP:$HGPORT '?cmd=pushkey' --requestheader 'x-hgarg-1=namespace=bookmarks&key=bm&old=&new=cb9a9f314b8b07ba71012fcdbc544b5a4d82ff5b' 401 read not authorized 0 read not authorized [1] $ get-with-headers.py $LOCALIP:$HGPORT '?cmd=batch' --requestheader 'x-hgarg-1=cmds=pushkey+namespace%3Dbookmarks%2Ckey%3Dbm%2Cold%3D%2Cnew%3Dcb9a9f314b8b07ba71012fcdbc544b5a4d82ff5b' 401 read not authorized 0 read not authorized [1] $ hg bookmarks no bookmarks set $ get-with-headers.py $LOCALIP:$HGPORT '?cmd=customreadnoperm' 401 read not authorized 0 read not authorized [1] $ get-with-headers.py $LOCALIP:$HGPORT '?cmd=customreadwithperm' 401 read not authorized 0 read not authorized [1] $ get-with-headers.py $LOCALIP:$HGPORT '?cmd=customwritenoperm' 401 read not authorized 0 read not authorized [1] $ get-with-headers.py $LOCALIP:$HGPORT '?cmd=customwritewithperm' 401 read not authorized 0 read not authorized [1] Reset server to remove REQUEST_METHOD hack to test hg client $ killdaemons.py $ REMOTE_USER=someuser hg serve -p $HGPORT -d --pid-file hg.pid $ cat hg.pid > $DAEMON_PIDS $ hg --cwd ../test2 push -B bm http://localhost:$HGPORT/ pushing to http://localhost:$HGPORT/ abort: authorization failed [255] $ hg --cwd ../test2 push http://localhost:$HGPORT/ pushing to http://localhost:$HGPORT/ abort: authorization failed [255] $ killdaemons.py