view tests/test-merge7.t @ 39772:ae531f5e583c

testing: add interface unit tests for file storage

Our strategy for supporting alternate storage backends is to define
interfaces for everything then "code to the interface."

We already have interfaces for various primitives, including file
and manifest storage.

What we don't have is generic unit tests for those interfaces. Up
to this point we've been relying on high-level integration tests
(mainly in the form of existing .t tests) to test alternate storage
backends. And my experience with developing the "simple store" test
extension is that such testing is very tedious: it takes several
minutes to run all tests and when you find a failure, it is often
non-trivial to debug.

This commit starts to change that.

This commit introduces the mercurial.testing.storage module. It
contains testing code for storage. Currently, it defines some
unittest.TestCase classes for testing the file storage interfaces.
It also defines some factory functions that allow a caller to easily
spawn a custom TestCase "bound" to a specific file storage backend
implementation.

A new .py test has been added. It simply defines a callable to produce
filelog and transaction instances on demand and then "registers" the
various test classes so the filelog class can be tested with the
storage interface unit tests.

As part of writing the tests, I identified a couple of apparent
bugs in revlog.py and filelog.py! These are tracked with inline
TODO comments.

Writing the tests makes it more obvious where the storage interface
is lacking. For example, we raise either IndexError or
error.LookupError for missing revisions depending on whether we
use an integer revision or a node. Also, we raise error.RevlogError
in various places when we should be raising a storage-agnostic
error type.

The storage interfaces are currently far from perfect and there is much
work to be done to improve them. But at least with this commit we
finally have the start of unit tests that can be used to "qualify"
the behavior of a storage backend. And when implementing and debugging
new storage backends, we now have an obvious place to define new
tests and have obvious places to insert breakpoints to facilitate
debugging. This should be invaluable when implementing new storage
backends.

I added the mercurial.testing package because these interface
conformance tests are generic and need to be usable by all storage
backends. Having the code live in tests/ would make it difficult for
storage backends implemented in extensions to test their interface
conformance. First, it would require obtaining a copy of Mercurial's
storage test code in order to test. Second, it would make testing
against multiple Mercurial versions difficult, as you would need to
import N copies of the storage testing code in order to achieve test
coverage. By making the test code part of the Mercurial distribution
itself, extensions can `import mercurial.testing.*` to access and run
the test code. The test will run against whatever Mercurial version
is active.

FWIW I've always wanted to move parts of run-tests.py into the
mercurial.* package to make the testing story simpler (e.g. imagine an
`hg debugruntests` command that could invoke the test harness). While I
have no plans to do that in the near future, establishing the
mercurial.testing package does provide a natural home for that code
should someone do this in the future.

Differential Revision: https://phab.mercurial-scm.org/D4650

initial
  $ hg init test-a
  $ cd test-a
  $ cat >test.txt <<"EOF"
  > 1
  > 2
  > 3
  > EOF
  $ hg add test.txt
  $ hg commit -m "Initial"

clone
  $ cd ..
  $ hg clone test-a test-b
  updating to branch default
  1 files updated, 0 files merged, 0 files removed, 0 files unresolved

change test-a
  $ cd test-a
  $ cat >test.txt <<"EOF"
  > one
  > two
  > three
  > EOF
  $ hg commit -m "Numbers as words"

change test-b
  $ cd ../test-b
  $ cat >test.txt <<"EOF"
  > 1
  > 2.5
  > 3
  > EOF
  $ hg commit -m "2 -> 2.5"

now pull and merge from test-a
  $ hg pull ../test-a
  pulling from ../test-a
  searching for changes
  adding changesets
  adding manifests
  adding file changes
  added 1 changesets with 1 changes to 1 files (+1 heads)
  new changesets 96b70246a118
  (run 'hg heads' to see heads, 'hg merge' to merge)
  $ hg merge
  merging test.txt
  warning: conflicts while merging test.txt! (edit, then use 'hg resolve --mark')
  0 files updated, 0 files merged, 0 files removed, 1 files unresolved
  use 'hg resolve' to retry unresolved file merges or 'hg merge --abort' to abandon
  [1]
resolve conflict
  $ cat >test.txt <<"EOF"
  > one
  > two-point-five
  > three
  > EOF
  $ rm -f *.orig
  $ hg resolve -m test.txt
  (no more unresolved files)
  $ hg commit -m "Merge 1"

change test-a again
  $ cd ../test-a
  $ cat >test.txt <<"EOF"
  > one
  > two-point-one
  > three
  > EOF
  $ hg commit -m "two -> two-point-one"

pull and merge from test-a again
  $ cd ../test-b
  $ hg pull ../test-a
  pulling from ../test-a
  searching for changes
  adding changesets
  adding manifests
  adding file changes
  added 1 changesets with 1 changes to 1 files (+1 heads)
  new changesets 40d11a4173a8
  (run 'hg heads' to see heads, 'hg merge' to merge)
  $ hg merge --debug
    searching for copies back to rev 1
  resolving manifests
   branchmerge: True, force: False, partial: False
   ancestor: 96b70246a118, local: 50c3a7e29886+, remote: 40d11a4173a8
   preserving test.txt for resolve of test.txt
  starting 4 threads for background file closing (?)
   test.txt: versions differ -> m (premerge)
  picked tool ':merge' for test.txt (binary False symlink False changedelete False)
  merging test.txt
  my test.txt@50c3a7e29886+ other test.txt@40d11a4173a8 ancestor test.txt@96b70246a118
   test.txt: versions differ -> m (merge)
  picked tool ':merge' for test.txt (binary False symlink False changedelete False)
  my test.txt@50c3a7e29886+ other test.txt@40d11a4173a8 ancestor test.txt@96b70246a118
  warning: conflicts while merging test.txt! (edit, then use 'hg resolve --mark')
  0 files updated, 0 files merged, 0 files removed, 1 files unresolved
  use 'hg resolve' to retry unresolved file merges or 'hg merge --abort' to abandon
  [1]

  $ cat test.txt
  one
  <<<<<<< working copy: 50c3a7e29886 - test: Merge 1
  two-point-five
  =======
  two-point-one
  >>>>>>> merge rev:    40d11a4173a8 - test: two -> two-point-one
  three

  $ hg debugindex test.txt
     rev linkrev nodeid       p1           p2
       0       0 01365c4cca56 000000000000 000000000000
       1       1 7b013192566a 01365c4cca56 000000000000
       2       2 8fe46a3eb557 01365c4cca56 000000000000
       3       3 fc3148072371 7b013192566a 8fe46a3eb557
       4       4 d40249267ae3 8fe46a3eb557 000000000000

  $ hg log
  changeset:   4:40d11a4173a8
  tag:         tip
  parent:      2:96b70246a118
  user:        test
  date:        Thu Jan 01 00:00:00 1970 +0000
  summary:     two -> two-point-one
  
  changeset:   3:50c3a7e29886
  parent:      1:d1e159716d41
  parent:      2:96b70246a118
  user:        test
  date:        Thu Jan 01 00:00:00 1970 +0000
  summary:     Merge 1
  
  changeset:   2:96b70246a118
  parent:      0:b1832b9d912a
  user:        test
  date:        Thu Jan 01 00:00:00 1970 +0000
  summary:     Numbers as words
  
  changeset:   1:d1e159716d41
  user:        test
  date:        Thu Jan 01 00:00:00 1970 +0000
  summary:     2 -> 2.5
  
  changeset:   0:b1832b9d912a
  user:        test
  date:        Thu Jan 01 00:00:00 1970 +0000
  summary:     Initial
  

  $ cd ..