view tests/test-config.t @ 46091:af3a6900f893

run-tests: fix `HGTESTEXTRAEXTENSIONS` with py3

Since `extensions` was a str and `section` bytes, it never populated anything.
If it had, it would have put bytes into the environment dictionary that is all
str.  As everything starts and ends as str, remove the incomplete attempt at
byteification.  It doesn't appear that we had any test coverage of this bit of
code, so also add a non-extension config to make sure it is filtered out
properly.

Differential Revision: https://phab.mercurial-scm.org/D9557

hide outer repo
  $ hg init

Invalid syntax: no value

  $ cat > .hg/hgrc << EOF
  > novaluekey
  > EOF
#if chg
  $ hg showconfig
  config error at $TESTTMP/.hg/hgrc:1: novaluekey
  [255]
#else
  $ hg showconfig
  config error at $TESTTMP/.hg/hgrc:1: novaluekey
  [30]
#endif

Invalid syntax: no key

  $ cat > .hg/hgrc << EOF
  > =nokeyvalue
  > EOF
#if chg
  $ hg showconfig
  config error at $TESTTMP/.hg/hgrc:1: =nokeyvalue
  [255]
#else
  $ hg showconfig
  config error at $TESTTMP/.hg/hgrc:1: =nokeyvalue
  [30]
#endif

Test hint about invalid syntax from leading white space

  $ cat > .hg/hgrc << EOF
  >  key=value
  > EOF
#if chg
  $ hg showconfig
  config error at $TESTTMP/.hg/hgrc:1: unexpected leading whitespace:  key=value
  [255]
#else
  $ hg showconfig
  config error at $TESTTMP/.hg/hgrc:1: unexpected leading whitespace:  key=value
  [30]
#endif

  $ cat > .hg/hgrc << EOF
  >  [section]
  > key=value
  > EOF
#if chg
  $ hg showconfig
  config error at $TESTTMP/.hg/hgrc:1: unexpected leading whitespace:  [section]
  [255]
#else
  $ hg showconfig
  config error at $TESTTMP/.hg/hgrc:1: unexpected leading whitespace:  [section]
  [30]
#endif

Reset hgrc

  $ echo > .hg/hgrc

Test case sensitive configuration

  $ cat <<EOF >> $HGRCPATH
  > [Section]
  > KeY = Case Sensitive
  > key = lower case
  > EOF

  $ hg showconfig Section
  Section.KeY=Case Sensitive
  Section.key=lower case

  $ hg showconfig Section -Tjson
  [
   {
    "defaultvalue": null,
    "name": "Section.KeY",
    "source": "*.hgrc:*", (glob)
    "value": "Case Sensitive"
   },
   {
    "defaultvalue": null,
    "name": "Section.key",
    "source": "*.hgrc:*", (glob)
    "value": "lower case"
   }
  ]
  $ hg showconfig Section.KeY -Tjson
  [
   {
    "defaultvalue": null,
    "name": "Section.KeY",
    "source": "*.hgrc:*", (glob)
    "value": "Case Sensitive"
   }
  ]
  $ hg showconfig -Tjson | tail -7
   {
    "defaultvalue": null,
    "name": "*", (glob)
    "source": "*", (glob)
    "value": "*" (glob)
   }
  ]

Test config default of various types:

 {"defaultvalue": ""} for -T'json(defaultvalue)' looks weird, but that's
 how the templater works. Unknown keywords are evaluated to "".

 dynamicdefault

  $ hg config --config alias.foo= alias -Tjson
  [
   {
    "name": "alias.foo",
    "source": "--config",
    "value": ""
   }
  ]
  $ hg config --config alias.foo= alias -T'json(defaultvalue)'
  [
   {"defaultvalue": ""}
  ]
  $ hg config --config alias.foo= alias -T'{defaultvalue}\n'
  

 null

  $ hg config --config auth.cookiefile= auth -Tjson
  [
   {
    "defaultvalue": null,
    "name": "auth.cookiefile",
    "source": "--config",
    "value": ""
   }
  ]
  $ hg config --config auth.cookiefile= auth -T'json(defaultvalue)'
  [
   {"defaultvalue": null}
  ]
  $ hg config --config auth.cookiefile= auth -T'{defaultvalue}\n'
  

 false

  $ hg config --config commands.commit.post-status= commands -Tjson
  [
   {
    "defaultvalue": false,
    "name": "commands.commit.post-status",
    "source": "--config",
    "value": ""
   }
  ]
  $ hg config --config commands.commit.post-status= commands -T'json(defaultvalue)'
  [
   {"defaultvalue": false}
  ]
  $ hg config --config commands.commit.post-status= commands -T'{defaultvalue}\n'
  False

 true

  $ hg config --config format.dotencode= format -Tjson
  [
   {
    "defaultvalue": true,
    "name": "format.dotencode",
    "source": "--config",
    "value": ""
   }
  ]
  $ hg config --config format.dotencode= format -T'json(defaultvalue)'
  [
   {"defaultvalue": true}
  ]
  $ hg config --config format.dotencode= format -T'{defaultvalue}\n'
  True

 bytes

  $ hg config --config commands.resolve.mark-check= commands -Tjson
  [
   {
    "defaultvalue": "none",
    "name": "commands.resolve.mark-check",
    "source": "--config",
    "value": ""
   }
  ]
  $ hg config --config commands.resolve.mark-check= commands -T'json(defaultvalue)'
  [
   {"defaultvalue": "none"}
  ]
  $ hg config --config commands.resolve.mark-check= commands -T'{defaultvalue}\n'
  none

 empty list

  $ hg config --config commands.show.aliasprefix= commands -Tjson
  [
   {
    "defaultvalue": [],
    "name": "commands.show.aliasprefix",
    "source": "--config",
    "value": ""
   }
  ]
  $ hg config --config commands.show.aliasprefix= commands -T'json(defaultvalue)'
  [
   {"defaultvalue": []}
  ]
  $ hg config --config commands.show.aliasprefix= commands -T'{defaultvalue}\n'
  

 nonempty list

  $ hg config --config progress.format= progress -Tjson
  [
   {
    "defaultvalue": ["topic", "bar", "number", "estimate"],
    "name": "progress.format",
    "source": "--config",
    "value": ""
   }
  ]
  $ hg config --config progress.format= progress -T'json(defaultvalue)'
  [
   {"defaultvalue": ["topic", "bar", "number", "estimate"]}
  ]
  $ hg config --config progress.format= progress -T'{defaultvalue}\n'
  topic bar number estimate

 int

  $ hg config --config profiling.freq= profiling -Tjson
  [
   {
    "defaultvalue": 1000,
    "name": "profiling.freq",
    "source": "--config",
    "value": ""
   }
  ]
  $ hg config --config profiling.freq= profiling -T'json(defaultvalue)'
  [
   {"defaultvalue": 1000}
  ]
  $ hg config --config profiling.freq= profiling -T'{defaultvalue}\n'
  1000

 float

  $ hg config --config profiling.showmax= profiling -Tjson
  [
   {
    "defaultvalue": 0.999,
    "name": "profiling.showmax",
    "source": "--config",
    "value": ""
   }
  ]
  $ hg config --config profiling.showmax= profiling -T'json(defaultvalue)'
  [
   {"defaultvalue": 0.999}
  ]
  $ hg config --config profiling.showmax= profiling -T'{defaultvalue}\n'
  0.999

Test empty config source:

  $ cat <<EOF > emptysource.py
  > def reposetup(ui, repo):
  >     ui.setconfig(b'empty', b'source', b'value')
  > EOF
  $ cp .hg/hgrc .hg/hgrc.orig
  $ cat <<EOF >> .hg/hgrc
  > [extensions]
  > emptysource = `pwd`/emptysource.py
  > EOF

  $ hg config --debug empty.source
  read config from: * (glob)
  none: value
  $ hg config empty.source -Tjson
  [
   {
    "defaultvalue": null,
    "name": "empty.source",
    "source": "",
    "value": "value"
   }
  ]

  $ cp .hg/hgrc.orig .hg/hgrc

Test "%unset"

  $ cat >> $HGRCPATH <<EOF
  > [unsettest]
  > local-hgrcpath = should be unset (HGRCPATH)
  > %unset local-hgrcpath
  > 
  > global = should be unset (HGRCPATH)
  > 
  > both = should be unset (HGRCPATH)
  > 
  > set-after-unset = should be unset (HGRCPATH)
  > EOF

  $ cat >> .hg/hgrc <<EOF
  > [unsettest]
  > local-hgrc = should be unset (.hg/hgrc)
  > %unset local-hgrc
  > 
  > %unset global
  > 
  > both = should be unset (.hg/hgrc)
  > %unset both
  > 
  > set-after-unset = should be unset (.hg/hgrc)
  > %unset set-after-unset
  > set-after-unset = should be set (.hg/hgrc)
  > EOF

  $ hg showconfig unsettest
  unsettest.set-after-unset=should be set (.hg/hgrc)

Test exit code when no config matches

  $ hg config Section.idontexist
  [1]

sub-options in [paths] aren't expanded

  $ cat > .hg/hgrc << EOF
  > [paths]
  > foo = ~/foo
  > foo:suboption = ~/foo
  > EOF

  $ hg showconfig paths
  paths.foo:suboption=~/foo
  paths.foo=$TESTTMP/foo

edit failure

  $ HGEDITOR=false hg config --edit
  abort: edit failed: false exited with status 1
  [10]

config affected by environment variables

  $ EDITOR=e1 VISUAL=e2 hg config --debug | grep 'ui\.editor'
  $VISUAL: ui.editor=e2

  $ VISUAL=e2 hg config --debug --config ui.editor=e3 | grep 'ui\.editor'
  --config: ui.editor=e3

  $ PAGER=p1 hg config --debug | grep 'pager\.pager'
  $PAGER: pager.pager=p1

  $ PAGER=p1 hg config --debug --config pager.pager=p2 | grep 'pager\.pager'
  --config: pager.pager=p2

verify that aliases are evaluated as well

  $ hg init aliastest
  $ cd aliastest
  $ cat > .hg/hgrc << EOF
  > [ui]
  > user = repo user
  > EOF
  $ touch index
  $ unset HGUSER
  $ hg ci -Am test
  adding index
  $ hg log --template '{author}\n'
  repo user
  $ cd ..

alias has lower priority

  $ hg init aliaspriority
  $ cd aliaspriority
  $ cat > .hg/hgrc << EOF
  > [ui]
  > user = alias user
  > username = repo user
  > EOF
  $ touch index
  $ unset HGUSER
  $ hg ci -Am test
  adding index
  $ hg log --template '{author}\n'
  repo user
  $ cd ..

configs should be read in lexicographical order

  $ mkdir configs
  $ for i in `$TESTDIR/seq.py 10 99`; do
  >    printf "[section]\nkey=$i" > configs/$i.rc
  > done
  $ HGRCPATH=configs hg config section.key
  99