view tests/test-stdio.py @ 46091:af3a6900f893

run-tests: fix `HGTESTEXTRAEXTENSIONS` with py3

Since `extensions` was a str and `section` bytes, it never populated anything.
If it had, it would have put bytes into the environment dictionary that is all
str.  As everything starts and ends as str, remove the incomplete attempt at
byteification.  It doesn't appear that we had any test coverage of this bit of
code, so also add a non-extension config to make sure it is filtered out
properly.

Differential Revision: https://phab.mercurial-scm.org/D9557

#!/usr/bin/env python3
"""
Tests the buffering behavior of stdio streams in `mercurial.utils.procutil`.
"""
from __future__ import absolute_import

import contextlib
import errno
import os
import signal
import subprocess
import sys
import tempfile
import unittest

from mercurial import pycompat, util


if pycompat.ispy3:

    def set_noninheritable(fd):
        # On Python 3, file descriptors are non-inheritable by default.
        pass


else:
    if pycompat.iswindows:
        # unused
        set_noninheritable = None
    else:
        import fcntl

        def set_noninheritable(fd):
            old = fcntl.fcntl(fd, fcntl.F_GETFD)
            fcntl.fcntl(fd, fcntl.F_SETFD, old | fcntl.FD_CLOEXEC)


TEST_BUFFERING_CHILD_SCRIPT = r'''
import os

from mercurial import dispatch
from mercurial.utils import procutil

dispatch.initstdio()
procutil.{stream}.write(b'aaa')
os.write(procutil.{stream}.fileno(), b'[written aaa]')
procutil.{stream}.write(b'bbb\n')
os.write(procutil.{stream}.fileno(), b'[written bbb\\n]')
'''
UNBUFFERED = b'aaa[written aaa]bbb\n[written bbb\\n]'
LINE_BUFFERED = b'[written aaa]aaabbb\n[written bbb\\n]'
FULLY_BUFFERED = b'[written aaa][written bbb\\n]aaabbb\n'


TEST_LARGE_WRITE_CHILD_SCRIPT = r'''
import os
import signal
import sys

from mercurial import dispatch
from mercurial.utils import procutil

signal.signal(signal.SIGINT, lambda *x: None)
dispatch.initstdio()
write_result = procutil.{stream}.write(b'x' * 1048576)
with os.fdopen(
    os.open({write_result_fn!r}, os.O_WRONLY | getattr(os, 'O_TEMPORARY', 0)),
    'w',
) as write_result_f:
    write_result_f.write(str(write_result))
'''


TEST_BROKEN_PIPE_CHILD_SCRIPT = r'''
import os
import pickle

from mercurial import dispatch
from mercurial.utils import procutil

dispatch.initstdio()
procutil.stdin.read(1)  # wait until parent process closed pipe
try:
    procutil.{stream}.write(b'test')
    procutil.{stream}.flush()
except EnvironmentError as e:
    with os.fdopen(
        os.open(
            {err_fn!r},
            os.O_WRONLY
            | getattr(os, 'O_BINARY', 0)
            | getattr(os, 'O_TEMPORARY', 0),
        ),
        'wb',
    ) as err_f:
        pickle.dump(e, err_f)
# Exit early to suppress further broken pipe errors at interpreter shutdown.
os._exit(0)
'''


@contextlib.contextmanager
def _closing(fds):
    try:
        yield
    finally:
        for fd in fds:
            try:
                os.close(fd)
            except EnvironmentError:
                pass


# In the following, we set the FDs non-inheritable mainly to make it possible
# for tests to close the receiving end of the pipe / PTYs.


@contextlib.contextmanager
def _devnull():
    devnull = os.open(os.devnull, os.O_WRONLY)
    # We don't have a receiving end, so it's not worth the effort on Python 2
    # on Windows to make the FD non-inheritable.
    with _closing([devnull]):
        yield (None, devnull)


@contextlib.contextmanager
def _pipes():
    rwpair = os.pipe()
    # Pipes are already non-inheritable on Windows.
    if not pycompat.iswindows:
        set_noninheritable(rwpair[0])
        set_noninheritable(rwpair[1])
    with _closing(rwpair):
        yield rwpair


@contextlib.contextmanager
def _ptys():
    if pycompat.iswindows:
        raise unittest.SkipTest("PTYs are not supported on Windows")
    import pty
    import tty

    rwpair = pty.openpty()
    set_noninheritable(rwpair[0])
    set_noninheritable(rwpair[1])
    with _closing(rwpair):
        tty.setraw(rwpair[0])
        yield rwpair


def _readall(fd, buffer_size, initial_buf=None):
    buf = initial_buf or []
    while True:
        try:
            s = os.read(fd, buffer_size)
        except OSError as e:
            if e.errno == errno.EIO:
                # If the child-facing PTY got closed, reading from the
                # parent-facing PTY raises EIO.
                break
            raise
        if not s:
            break
        buf.append(s)
    return b''.join(buf)


class TestStdio(unittest.TestCase):
    def _test(
        self,
        child_script,
        stream,
        rwpair_generator,
        check_output,
        python_args=[],
        post_child_check=None,
        stdin_generator=None,
    ):
        assert stream in ('stdout', 'stderr')
        if stdin_generator is None:
            stdin_generator = open(os.devnull, 'rb')
        with rwpair_generator() as (
            stream_receiver,
            child_stream,
        ), stdin_generator as child_stdin:
            proc = subprocess.Popen(
                [sys.executable] + python_args + ['-c', child_script],
                stdin=child_stdin,
                stdout=child_stream if stream == 'stdout' else None,
                stderr=child_stream if stream == 'stderr' else None,
            )
            try:
                os.close(child_stream)
                if stream_receiver is not None:
                    check_output(stream_receiver, proc)
            except:  # re-raises
                proc.terminate()
                raise
            finally:
                retcode = proc.wait()
            self.assertEqual(retcode, 0)
            if post_child_check is not None:
                post_child_check()

    def _test_buffering(
        self, stream, rwpair_generator, expected_output, python_args=[]
    ):
        def check_output(stream_receiver, proc):
            self.assertEqual(_readall(stream_receiver, 1024), expected_output)

        self._test(
            TEST_BUFFERING_CHILD_SCRIPT.format(stream=stream),
            stream,
            rwpair_generator,
            check_output,
            python_args,
        )

    def test_buffering_stdout_devnull(self):
        self._test_buffering('stdout', _devnull, None)

    def test_buffering_stdout_pipes(self):
        self._test_buffering('stdout', _pipes, FULLY_BUFFERED)

    def test_buffering_stdout_ptys(self):
        self._test_buffering('stdout', _ptys, LINE_BUFFERED)

    def test_buffering_stdout_devnull_unbuffered(self):
        self._test_buffering('stdout', _devnull, None, python_args=['-u'])

    def test_buffering_stdout_pipes_unbuffered(self):
        self._test_buffering('stdout', _pipes, UNBUFFERED, python_args=['-u'])

    def test_buffering_stdout_ptys_unbuffered(self):
        self._test_buffering('stdout', _ptys, UNBUFFERED, python_args=['-u'])

    if not pycompat.ispy3 and not pycompat.iswindows:
        # On Python 2 on non-Windows, we manually open stdout in line-buffered
        # mode if connected to a TTY. We should check if Python was configured
        # to use unbuffered stdout, but it's hard to do that.
        test_buffering_stdout_ptys_unbuffered = unittest.expectedFailure(
            test_buffering_stdout_ptys_unbuffered
        )

    def _test_large_write(self, stream, rwpair_generator, python_args=[]):
        if not pycompat.ispy3 and pycompat.isdarwin:
            # Python 2 doesn't always retry on EINTR, but the libc might retry.
            # So far, it was observed only on macOS that EINTR is raised at the
            # Python level. As Python 2 support will be dropped soon-ish, we
            # won't attempt to fix it.
            raise unittest.SkipTest("raises EINTR on macOS")

        def check_output(stream_receiver, proc):
            if not pycompat.iswindows:
                # On Unix, we can provoke a partial write() by interrupting it
                # by a signal handler as soon as a bit of data was written.
                # We test that write() is called until all data is written.
                buf = [os.read(stream_receiver, 1)]
                proc.send_signal(signal.SIGINT)
            else:
                # On Windows, there doesn't seem to be a way to cause partial
                # writes.
                buf = []
            self.assertEqual(
                _readall(stream_receiver, 131072, buf), b'x' * 1048576
            )

        def post_child_check():
            write_result_str = write_result_f.read()
            if pycompat.ispy3:
                # On Python 3, we test that the correct number of bytes is
                # claimed to have been written.
                expected_write_result_str = '1048576'
            else:
                # On Python 2, we only check that the large write does not
                # crash.
                expected_write_result_str = 'None'
            self.assertEqual(write_result_str, expected_write_result_str)

        with tempfile.NamedTemporaryFile('r') as write_result_f:
            self._test(
                TEST_LARGE_WRITE_CHILD_SCRIPT.format(
                    stream=stream, write_result_fn=write_result_f.name
                ),
                stream,
                rwpair_generator,
                check_output,
                python_args,
                post_child_check=post_child_check,
            )

    def test_large_write_stdout_devnull(self):
        self._test_large_write('stdout', _devnull)

    def test_large_write_stdout_pipes(self):
        self._test_large_write('stdout', _pipes)

    def test_large_write_stdout_ptys(self):
        self._test_large_write('stdout', _ptys)

    def test_large_write_stdout_devnull_unbuffered(self):
        self._test_large_write('stdout', _devnull, python_args=['-u'])

    def test_large_write_stdout_pipes_unbuffered(self):
        self._test_large_write('stdout', _pipes, python_args=['-u'])

    def test_large_write_stdout_ptys_unbuffered(self):
        self._test_large_write('stdout', _ptys, python_args=['-u'])

    def test_large_write_stderr_devnull(self):
        self._test_large_write('stderr', _devnull)

    def test_large_write_stderr_pipes(self):
        self._test_large_write('stderr', _pipes)

    def test_large_write_stderr_ptys(self):
        self._test_large_write('stderr', _ptys)

    def test_large_write_stderr_devnull_unbuffered(self):
        self._test_large_write('stderr', _devnull, python_args=['-u'])

    def test_large_write_stderr_pipes_unbuffered(self):
        self._test_large_write('stderr', _pipes, python_args=['-u'])

    def test_large_write_stderr_ptys_unbuffered(self):
        self._test_large_write('stderr', _ptys, python_args=['-u'])

    def _test_broken_pipe(self, stream):
        assert stream in ('stdout', 'stderr')

        def check_output(stream_receiver, proc):
            os.close(stream_receiver)
            proc.stdin.write(b'x')
            proc.stdin.close()

        def post_child_check():
            err = util.pickle.load(err_f)
            self.assertEqual(err.errno, errno.EPIPE)
            self.assertEqual(err.strerror, "Broken pipe")

        with tempfile.NamedTemporaryFile('rb') as err_f:
            self._test(
                TEST_BROKEN_PIPE_CHILD_SCRIPT.format(
                    stream=stream, err_fn=err_f.name
                ),
                stream,
                _pipes,
                check_output,
                post_child_check=post_child_check,
                stdin_generator=util.nullcontextmanager(subprocess.PIPE),
            )

    def test_broken_pipe_stdout(self):
        self._test_broken_pipe('stdout')

    def test_broken_pipe_stderr(self):
        self._test_broken_pipe('stderr')


if __name__ == '__main__':
    import silenttestrunner

    silenttestrunner.main(__name__)